BoP Lab / Buttonwillow Raceway Park

FP + P + STL at Buttonwillow Raceway Park

No mapCal Club 2024

This track has been raced on 2 configurations (The Circuit, 2.57 mi; 2.92 mi). Laps on different configurations are not comparable, so only events on the 2.57 mile layout are shown; switch above to see the others.

Pos	Car	Driver	Class	#	Lap	Theoretical	Qual	Race	5-lap stint	Consistency	Trap	S1	S2	S3
1	Elan DP02/Mazda	Jim Devenport	P	23, 28	1:32.576 A-P	1:32.284	1:32.872 B-Q2	1:33.972 B-R2	1:35.195 B-R1	+1.742 B-R1	171.9 A-P	25.461 B-Q2	26.606 A-P	40.217 A-P
2	Dauntless Stohr	Johnnie Crean	P	3, 135	1:36.516 B-Q1	1:36.516	1:36.516 B-Q1	1:39.209 B-R1	1:40.027 B-R1	+1.943 B-R1	157.4 B-P	25.956 B-Q1	28.143 B-Q1	42.417 B-Q1
3	Dauntless-Stohr P07d	John Manfroy	P	08	1:37.287 A-R2	1:36.339	1:41.818 A-Q1	1:37.287 A-R2	1:39.027 A-R2	+2.902 A-R2	160.4 A-R2	26.696 A-R2	27.257 A-R2	42.386 A-R2
4	Stohr WF1	Kevin Mitz	P	13	1:38.716 A-Q2	1:38.667	1:38.716 A-Q2	1:39.638 A-R2	1:40.087 A-R2	+0.641 A-R2	155.4 A-Q1	26.934 A-Q2	28.397 A-Q2	43.336 A-Q2
5	Penton Norma M20FC	Joseph Moran	P	7	1:39.296 A-Q2	1:38.868	1:39.296 A-Q2	1:40.832 A-R1	1:42.328 A-R1	+3.544 A-R1	149.0 A-Q2	27.106 B-Q1	28.111 A-Q1	43.651 A-Q1
6	Mazda MX-5	Jared Korth	STL	27	1:51.665 B-P	1:51.645		1:58.002 A-R2	1:58.825 A-R2	+1.245 A-R2	134.8 A-R1, A-R2	30.616 B-P	32.218 B-P	48.811 B-P
7	Mazda Miata	Wesley Mollno	STL	11, 111	1:52.983 B-P	1:52.983	1:59.582 A-Q1	1:59.163 A-R1	1:59.870 B-R2	+0.510 B-R2	133.4 A-Q1	30.838 B-P	33.020 B-P	49.197 B-P
8	Mazda Miata	Jon Davies	STL	67	1:53.071 B-P	1:53.071	1:59.281 B-Q1	1:59.121 B-R1	1:59.683 B-R1	+1.145 B-R1	127.3 B-P	30.815 B-P	32.820 B-P	49.536 B-P
9	Mazda RX-8	David LeCren	STL	2	1:53.515 B-P	1:53.253	2:09.464 A-Q2	2:11.372 A-R2	2:11.978 A-R2	+5.025 A-R2	121.0 A-Q2	31.217 B-P	32.486 B-P	49.550 B-P
10	Mazda Miata	Sayo Haraishi	STL	34	1:54.120 B-P	1:54.019	2:08.265 B-Q1	2:09.190 B-R1	2:09.557 B-R1	+0.759 B-R1	105.6 B-P	31.129 B-P	33.359 B-P	49.531 B-P
11	Mazda MX-5	Ricardo Arruda	STL	16	1:54.343 B-P	1:54.343	2:00.717 B-Q2	2:01.410 B-R1	2:02.207 B-R1	+0.929 B-R1	104.3 B-P	31.248 B-P	32.888 B-P	50.207 B-P
12	Mazda MX-5	Gavin Wardle	STL	169	1:54.845 A-R1	sector data unreliable	1:58.292 A-Q2	1:54.845 A-R1	1:59.598 A-R2	+0.868 A-R2	132.7 A-R2	8.264	33.984	51.822
13	Mazda Miata	Nick Leverone	STL	137, 37	1:54.963 B-Q2	1:54.891	1:54.963 B-Q2	1:55.682 B-R1	1:56.512 B-R1	+1.038 B-R1	106.0 B-Q1	31.458 B-Q2	32.979 B-Q2	50.454 B-Q2
14	Mazda RX-7	Michael Lewis	FP	32	1:55.440 B-R2	1:55.401	1:56.121 B-Q1	1:55.440 B-R2	1:56.358 B-R2	+2.235 B-R2	128.8 A-R2	31.255 B-R2	33.299 B-Q2	50.847 B-R2
15	Nissan Sentra SE-R	Brian Linn	FP	123, 3	1:55.722 B-R2	1:55.294	1:57.239 B-Q1	1:55.722 B-R2	1:56.460 B-R2	+1.971 B-R2	128.3 B-P	31.416 B-R2	33.400 B-R2	50.478 B-R2
16	Volkswagen GTI	Tim Linerud	FP	95	1:56.016 B-P	1:56.016		2:06.156 B-R1	2:07.807 B-R1	+3.270 B-R1	93.4 B-R2	33.738 B-R1	35.656 B-P	55.246 B-P
17	Mazda MIata	Steven Powers	FP	145	1:56.276 B-R2	1:55.982	1:57.032 B-Q1	1:56.276 B-R2	1:56.620 B-R2	+0.759 B-R2	134.3 A-Q2, A-R2	31.570 B-R2	33.696 B-R2	50.716 B-R2
18	Honda Civic Si	Jonathan Lugod	STL	61	1:56.438 B-R1	1:56.128	1:57.331 B-Q2	1:56.438 B-R1	1:57.403 B-R1	+1.528 B-R1	106.8 B-P	31.787 B-P	33.468 B-P	50.873 B-P
19	Honda Prelude	Carl Young	STL	23	1:56.961 B-R1	1:56.631	1:57.917 B-Q2	1:56.961 B-R1	1:57.759 B-R1	+1.599 B-R1	104.5 B-Q2	31.994 B-R1	33.745 B-R1	50.892 B-R1
20	Mazda MX-5	Ryan Gutile	STL	116	1:57.404 B-Q1	1:57.004	1:57.404 B-Q1	1:57.483 B-R1	1:58.542 B-R1	+1.371 B-R1	128.4 A-Q2	31.829 B-R1	33.695 B-Q1	51.480 B-R1
21	Mazda Miata	Amy Mills	STL	114	1:57.757 A-Q2	1:57.494	1:57.757 A-Q2	1:58.239 B-R2	1:58.840 B-R2	+1.462 B-R2	122.6 A-R2	32.321 B-Q2	33.780 A-Q2	51.393 A-Q2
22	Mazda MX-5	Bryce Johnson	STL	15, 13	1:58.716 A-Q2	1:58.419	1:58.716 A-Q2	1:59.496 A-R2	1:59.874 A-R2	+0.878 A-R2	136.6 A-Q1	32.248 A-Q1	34.104 A-Q2	52.067 A-Q2
23	Fiat X/1 9	Daniel Snow	FP	1	1:59.128 B-R2	1:58.152	2:00.398 B-Q1	1:59.128 B-R2	1:59.511 B-R2	+0.364 B-R2	137.8 A-R2	31.878 B-R2	34.053 B-R2	52.221 A-R2
24	Mazda Miata	Patrick Drinkwine	STL	151	1:59.239 B-Q1	1:58.754	1:59.239 B-Q1	2:00.132 B-R1	2:00.548 B-R1	+0.505 B-R1	106.6 B-P	32.503 B-P	34.167 B-P	52.084 B-P
25	Mazda MX-5 (2015)	Adrian Comstock	STL	25	2:00.239 A-Q2	2:00.015	2:00.239 A-Q2	2:00.722 A-R1	2:01.250 A-R2	+0.672 A-R2	133.0 A-R2	32.847 A-R2	34.493 A-Q2	52.675 A-Q2
26	Mazda MX-5	Andy Chittum	STL	99	2:00.296 A-Q2	1:59.684	2:00.296 A-Q2	2:00.787 A-R1	2:01.366 A-R1	+1.093 A-R1	132.9 A-R2	32.848 A-Q1	34.467 A-Q2	52.369 A-Q2
27	Mazda Miata	Richard James	STL	91	2:02.318 B-R1	2:01.786	2:02.441 A-Q1	2:02.318 B-R1	2:03.149 B-R2	+0.867 B-R2	126.7 A-R1	32.990 B-R1	35.132 A-Q1	53.664 B-R1
28	Mazda Miata	Todd Launchbaugh	STL	73	2:02.759 B-R1	2:02.624		2:02.759 B-R1	2:03.974 B-R1	+1.599 B-R1	98.5 B-R1	33.210 B-R1	35.059 B-R1	54.355 B-R1
29	Mazda Miata	Ayden Vaillancour	STL	88	2:03.022 B-R1	2:02.301	2:03.653 B-Q2	2:03.022 B-R1	2:03.841 B-R1	+0.936 B-R1	100.4 B-P	33.072 B-P	35.168 B-P	54.061 B-R1
30	Porsche 914-4	Garey Raymond >115%	FP	29	2:15.932 B-R2	2:15.932	2:21.274 B-Q1	2:15.932 B-R2	2:17.314 B-R2	+3.922 B-R2	84.8 B-R1	37.237 B-R2	39.091 B-R2	59.604 B-R2
31	Mazda Miata	Lauren Lewis >115%	STL	45	2:17.307 A-R1	2:16.162		2:17.307 A-R1	2:18.705 A-R1	+1.938 A-R1	108.6 A-R1	36.821 A-R1	39.026 A-R1	1:00.315 A-R2
32	Acura integra	Jack McEachern >115%	STL	21	2:24.310 B-Q2	2:22.511	2:24.310 B-Q2	2:24.550 B-R2	2:32.162 B-R1	+2.229 B-R1	77.6 B-Q1	38.960 B-Q1	41.141 B-Q2	1:02.410 B-R2

One row per driver and car (a driver who changed cars has a row for each). Each cell is that driver's best in that car across the selected events, with the session it was set in. Best 5-lap stint is the mean of the driver's quickest five consecutive race laps, and consistency is how far their median race lap sat behind their best in that race (small is a driver who does it every lap); both come from the race with the best stint. The fastest in each column is purple, and a car whose best lap is more than 115% of the fastest in its class is greyed (marked ">115%" beside the driver) and left out of the colour scale. Click a column to sort, a row to highlight it. Theoretical lap is the sum of the best sectors, whichever laps they came from, and never slower than the best lap (where a car's fastest laps were recorded without sector times, its best lap is used). The 115% mark is about the car's best lap only: a car whose best lap is within 115% of the fastest in its class is never marked. Greyed sectors with no theoretical lap mean the sector times on file do not add up to a believable lap. Letters refer to the events above; Q is qualifying, R a race.

Sectors

S1 SF → IM1 0.65 mi
S2 IM1 → IM2 0.75 mi
S3 IM2 → SF 1.17 mi
Spd In → Out 0.03 mi

Sectors are numbered in lap order from start/finish, whatever each event's timing called them; the loop names are SCCA timing's.

By car

Car	Class	Drivers	Lap	Qual	Race	Trap	S1	S2	S3
Elan DP02/Mazda	P	1	1:32.576Jim Devenport	1:32.872Jim Devenport	1:33.972Jim Devenport	171.9Jim Devenport	25.461Jim Devenport	26.606Jim Devenport	40.217Jim Devenport
Dauntless Stohr	P	2	1:36.516Johnnie Crean	1:36.516Johnnie Crean	1:37.287John Manfroy	160.4John Manfroy	25.956Johnnie Crean	27.257John Manfroy	42.386John Manfroy
Dauntless Stohr	P	1	1:36.516Johnnie Crean	1:36.516Johnnie Crean	1:39.209Johnnie Crean	157.4Johnnie Crean	25.956Johnnie Crean	28.143Johnnie Crean	42.417Johnnie Crean
Dauntless-Stohr P07d	P	1	1:37.287John Manfroy	1:41.818John Manfroy	1:37.287John Manfroy	160.4John Manfroy	26.696John Manfroy	27.257John Manfroy	42.386John Manfroy
Stohr WF1	P	1	1:38.716Kevin Mitz	1:38.716Kevin Mitz	1:39.638Kevin Mitz	155.4Kevin Mitz	26.934Kevin Mitz	28.397Kevin Mitz	43.336Kevin Mitz
Penton Norma M20FC	P	1	1:39.296Joseph Moran	1:39.296Joseph Moran	1:40.832Joseph Moran	149.0Joseph Moran	27.106Joseph Moran	28.111Joseph Moran	43.651Joseph Moran
Mazda Miata	FP/STL	18	1:51.665Jared Korth	1:54.963Nick Leverone	1:54.845Gavin Wardle	136.6Bryce Johnson	8.264Gavin Wardle	32.218Jared Korth	48.811Jared Korth
Mazda MX-5	STL	6	1:51.665Jared Korth	1:57.404Ryan Gutile	1:54.845Gavin Wardle	136.6Bryce Johnson	8.264Gavin Wardle	32.218Jared Korth	48.811Jared Korth
Mazda Miata	STL	10	1:52.983Wesley Mollno	1:54.963Nick Leverone	1:55.682Nick Leverone	133.4Wesley Mollno	30.815Jon Davies	32.820Jon Davies	49.197Wesley Mollno
Mazda MIata	FP	1	1:56.276Steven Powers	1:57.032Steven Powers	1:56.276Steven Powers	134.3Steven Powers	31.570Steven Powers	33.696Steven Powers	50.716Steven Powers
Mazda MX-5 (2015)	STL	1	2:00.239Adrian Comstock	2:00.239Adrian Comstock	2:00.722Adrian Comstock	133.0Adrian Comstock	32.847Adrian Comstock	34.493Adrian Comstock	52.675Adrian Comstock
Mazda RX-8	STL	1	1:53.515David LeCren	2:09.464David LeCren	2:11.372David LeCren	121.0David LeCren	31.217David LeCren	32.486David LeCren	49.550David LeCren
Mazda RX-7	FP	1	1:55.440Michael Lewis	1:56.121Michael Lewis	1:55.440Michael Lewis	128.8Michael Lewis	31.255Michael Lewis	33.299Michael Lewis	50.847Michael Lewis
Nissan Sentra SE-R	FP	1	1:55.722Brian Linn	1:57.239Brian Linn	1:55.722Brian Linn	128.3Brian Linn	31.416Brian Linn	33.400Brian Linn	50.478Brian Linn
Volkswagen GTI	FP	1	1:56.016Tim Linerud		2:06.156Tim Linerud	93.4Tim Linerud	33.738Tim Linerud	35.656Tim Linerud	55.246Tim Linerud
Honda Civic Si	STL	1	1:56.438Jonathan Lugod	1:57.331Jonathan Lugod	1:56.438Jonathan Lugod	106.8Jonathan Lugod	31.787Jonathan Lugod	33.468Jonathan Lugod	50.873Jonathan Lugod
Honda Prelude	STL	1	1:56.961Carl Young	1:57.917Carl Young	1:56.961Carl Young	104.5Carl Young	31.994Carl Young	33.745Carl Young	50.892Carl Young
Fiat X 1/9	FP	1	1:59.128Daniel Snow	2:00.398Daniel Snow	1:59.128Daniel Snow	137.8Daniel Snow	31.878Daniel Snow	34.053Daniel Snow	52.221Daniel Snow
Porsche 914-4	FP	1	2:15.932Garey Raymond	2:21.274Garey Raymond	2:15.932Garey Raymond	84.8Garey Raymond	37.237Garey Raymond	39.091Garey Raymond	59.604Garey Raymond
Acura integra	STL	1	2:24.310Jack McEachern	2:24.310Jack McEachern	2:24.550Jack McEachern	77.6Jack McEachern	38.960Jack McEachern	41.141Jack McEachern	1:02.410Jack McEachern

The best any driver of each car managed across the selected events, with who set it. Spellings and model years of the same car are grouped; click a row marked ▸ to see each version. Grouping is worked out from the names, so tell us if two cars are wrongly merged or split.

Rule changes between these events

Cal Club 2024 → Cal Club 2025 2024-02-23 to 2025-02-22

2024-03-01 FP GCR Correction - Redundant HP Spec Lines

#35623 from Production Committee · Rule change · TB 24-03 (2024-03 Fastrack)

neutralHP removes four redundant VW spec lines: Rabbit Cabriolet 1780, Scirocco 1588, Scirocco 1780 8-valve, Scirocco 1588.

In HP Spec Lines, delete the following redundant spec lines in their entirety:
Spec line #10 - VW Rabbit Cabriolet 1780
Spec line #3 - VW Scirocco 1588
Spec line #4 - VW Scirocco 1780 (8-valve) (83-88)
Spec line #5 - VW Scirocco 1588

2024-03-01 FP Update FP Protege (01-03) Model Info

#35715 from Production Committee · Rule change · TB 24-03 (2024-03 Fastrack)

neutralFP Mazda Protégé ES (01-03) model designation updated to include /5 variant.

In FP Spec Lines, Mazda Protégé ES (01-03) change vehicle as follows:
"Mazda Protégé ES/5 (01-03)"

2024-05-01 FP Request to Replace CRX Plastic Panels

#35876 from Darryl Saylor · Rule change · TB 24-05 (2024-05 Fastrack)

neutralFP Honda CRX 84-87 can replace plastic front header, rocker skirt, door cap panels with stock-appearance replicas in alternate materials.

In FP spec line "Honda CRX / CRX Si (84-87)", add the following wording to the Notes section:
"The plastic OE front header/nose body panel, lower rocker side-skirt, and lower door cap panel can be replaced by a
replica, which may be constructed of an alternate material, provided its appearance remains stock."

2024-05-01 FP FP data and parity

#35896 from Production Committee · Rule change · TB 24-05 (2024-05 Fastrack)

slowerFP Acura Integra and Honda Civic models now require 55mm Flat Plate Intake Restrictor.

In the following FP spec lines, add the following wording to the Notes section:
Acura Integra (90-93)
Acura Integra LS (94-01)
Acura Integra GSR (92-93)
Honda Civic Del Sol VTEC (94-97)
Honda Civic Si (99-00)
"55mm Flat Plate Intake Restrictor is required."

2024-06-01 FP NIssan 300ZX Z31 to EP

#35830 from Murphy Nichols · Rule change · TB 24-06 (2024-06 Fastrack)

neutralNissan 300ZX 84-89 classified to EP at 2550 lbs minimum, 2960cc 6-cyl SOHC, fuel injection, 12.0:1 compression limit, 0.500" valve lift limit.

In EP Spec Lines, classify Nissan 300ZX (84-89), as follows:

A specification table follows in the original; it is not shown here.

2024-06-01 FP RX7 1993 and Up Request In EP Spec Lines, classify

#36031 from Edward Zabinski · Rule change · TB 24-06 (2024-06 Fastrack)

neutralMazda RX-7 92-97 newly classified EP Prep Level 2 at 2200–2310 lbs with 13B 6-port rotary engine.

Mazda RX-7 (92-97) as follows:

A specification table follows in the original; it is not shown here.

2024-06-01 FP Clean-up Multiple EP RX-8 Spec Lines In EP

#36156 from Production Committee · Rule change · TB 24-06 (2024-06 Fastrack)

neutralEP Mazda RX-8 (04-11) alternate spec line removed; one primary line remains.

Spec Lines, make the following changes to the two Mazda RX-8 spec lines.
Remove spec line entirely:
~~Mazda RX-8 (04-11)~~
Remove the wording "alternate":
Mazda RX-8 (04-11)~~(alternate)~~
Spec Mazda (SM/SMX) None.

2024-08-01 FP Errant entry in HP production line item

#36231 from Angus Crome · Rule change · TB 24-08 (2024-08 Fastrack)

neutralHP Volkswagen Golf and Jetta 85-92 track correction: front 1537mm (60.5in), rear 1529mm (60.2in).

In HP Spec Lines, change Track (F/R)mm/(in.) as follows:
Volkswagen Golf (GTI, GT, GL) (85-92): "2 1537/1529 (60.5/60.2)"
Volkswagen Jetta (GLI, GL) (85-92): "2 1537/1529 (60.5/60.2)"

2024-10-01 FP Errors/emissions Honda Civic/CRX

#36700 from Martin Burk · Rule change · TB 24-10 (2024-10 Fastrack)

fasterFP Honda CRX/CRX Si 84-87 block material changes from Iron to Alum.

In FP Spec Lines, Honda CRX / CRX Si (84-87), change Block Mat'l as follows:
"~~Iron~~ Alum"

2024-11-01 FP 1275 HP Spridget Level 2 Only

#36518 from Darryl Saylor · Rule change · TB 24-09 (2024-09 Fastrack)

fasterHP Sprite and Midget 1275cc and 1098cc Level 2 compression ratio raised to 12.0:1.

In HP Spec Lines, Austin-Healey Sprite MkI, II, III, IV MG Midget (ALL) - Level 2 - 1275cc, change Notes as follows:
"(Effective 11/1/2024) Compression ratio limited to 11 12.0:1"
In HP Spec Lines, Austin-Healey Sprite MkI, II, III, IV MG Midget (ALL) - Level 2 - 1098cc, change Notes as follows:
"(Effective 11/1/2024) Compression ratio limited to 11 12.0:1"

2024-12-01 STL Request to Remove Miata Hubs from General category

#37138 from Christopher Childs · Rule change · TB 24-12 (2024-12 Fastrack)

neutralSTL/STU: 90-05 Mazda Miata alternate front wheel hubs moved from General to specific part approval.

In GCR, Section 9.1.4.M.18., change as follows:
"18. Allow alternate front wheel front hubs, Mazda Motorsports Development Part #0000-04-5HUB-S1, for the 90-05 Mazda
Miata~~: Mazda Motorsports Development Part #0000-04-5HUB-S1~~."

2025-01-01 FP Request to Reduce Weight of BMW 325i/is E30 (84-91) Spec Line

#37119 from Tim Schreyer · Rule change · TB 25-01 (2025-01 Fastrack)

fasterEP BMW 325i/is E30 (84-91) weight reduced 50–52 lbs across three spec lines to 2150, 2204, 2258.

In EP SPEC LINES, BMW 325i/is (E30) (84-91), change Weight as follows:
"~~2200~~ 2150
*~~2255~~ 2204
**~~2310~~ 2258"

2025-01-01 FP Fix Error in Spridget Spec Line

#37437 from Jason Stine · Rule change · TB 25-01 (2025-01 Fastrack)

neutralFP Spridget and Midget 1275cc and 1500cc spec line corrections to bore, stroke, displacement, and valve sizes.

In FP SPEC LINES, Austin-Healey Sprite Mk. I, II,III, IV MG Midget Mk I,II, III, IV & 1500, change the following:
1275cc:
Bore x Stroke: "~~68.1x78.4 (2.68x3.09)~~ 70.6x81.3 (2.78x3.20)"
Displacement: "~~(77.78)~~ 1275"
Valves IN & EX: ~~"(I) 32.1/(1.26) (E) 28.4/(1.12)~~ (I) 33.3/(1.31) (E) 29.5/(1.16)"
1500cc:
Bore x Stroke: "~~1.1x84.3~~ 73.7x87.4 (2.90x3.44)"
Displacement: "~~1491 (90.95)~~ 1493"

Show 1 more lines

Valves IN & EX: "(I) 36.6/(1.44) (E) ~~28.7~~ 29.7/(1.17)"

2025-01-01 FP Create ruleset that allows GTL cars to run in FP

#37485 from Club Racing Board · Rule change · TB 25-01 (2025-01 Fastrack)

neutralF Production now allows GT-Lite cars meeting Appendix N specifications to compete, effective 2025-01-01.

“~~(Effective January 1, 2026)~~ (Effective January 1, 2025)." Any GT-Lite (GTL) car meeting all of the requirements of Appendix N
GT-LITE CATEGORY SPECIFICATIONS for inclusion into F PRODUCTION" may compete in the F-Production class. For GTL cars
competing in FP, the level of preparation and modifications will be determined by Appendix N and not by PCS 9.1.5.”

2025-02-01 P Correct text in engine table notes

#37606 from Club Racing Board · Rule change · TB 25-02 (2025-02 Fastrack)

neutralPrototype Staudacher and unrestricted engine notes corrected for minimum weight wording.

In Prototype Engine Table, Spec Line B, change the notes as follows:
"Staudacher cars may run 950 lb ~~min. wt.~~ minimum weight with 38.5mm flat plate intake restrictor."
In Prototype Engine Table, Spec Line D, change the notes as follows:
"No restrictor required at 1150 lb ~~min. wt.~~ minimum weight."

2025-02-01 P Update Prototype class designation

#37653 from Club Racing Board · Rule change · TB 25-02 (2025-02 Fastrack)

neutralPrototype class renamed from P1 to P, affecting designation throughout rules with no performance changes.

In Categories and Classes, GCR section 9.1, change as follows:
"9.1.8. SPORTS RACING CATEGORY CLASSES
A Sports Racing (ASR) Regional Class
Prototype 1 (P1)"
In Homologation Requirements, GCR section 9.2.2, change as follows:
"All Formula, Sports Racing, ~~and~~ P1, and P2 cars must be constructed in strict accordance with the rules and regulations
contained in the current GCR unless specifically excepted."
In Non-Metallic Wheel/Chassis Construction, GCR section 9.3.37, change as follows:

Show 20 more lines

"Non-metallic wheel construction is prohibited. Non-metallic chassis construction is prohibited, except in ASR, P1, FS and FA."
In Appendix B, GCR section 1.4.2.G, change as follows:
"It is preferable not to combine GT1, AS, T1, T2, T3, and STU with P1, P2, SRF, FP, HP, or GTL."
In Appendix C, GCR section 2.6.G, change as follows:
"A 14 or 15 year-old must complete his first SCCA driver school in a car not classed in GT1, GT2, FA, F~~B, F~~ S, ITR, ASR, P1, P2, or
T1."
In Appendix E, section 1, change as follows:
"Depending on the length and banking of the oval course being used, it is recommended that Regions consider restricting the
faster classes (GT1, FA, and P 1) from competition at oval track events."
In Sports Racing Category, GCR section 9.1.8.1, change as follows:
"The SCCA Sports Racing Category shall be for automobiles which are designed and constructed for road racing competition,
offering provisions for a driver and passenger, or a driver alone (single-seater). They shall conform to the following
requirements. Sports Racers Cars except SRF & SRF3 homologated prior to 1-1-2014 are eligible to compete as P1 or P2 as long
as they meet applicable class rules,; no re-homologation is required."
"Single seat Formula car chassis (Ex.: FA, FC, FF, FV) fitted with enclosed bodies (as specified in these rules) may run in a Sports
Racing/Prototype Class (ASR, P 1, P2) provided they comply with the requirements of the Classification Specification and GCR
Section 9."
In Sports Racing Category, GCR section 9.1.8.2, change as follows:
"In an effort to control shock/damper technology and cost to a level reasonable for Road Racing, in ASR, P1, and P2, any fluid
dampers are allowed with the following restrictions:"

2025-02-21 FP Effective date for Jan 2025 GCR updates

#37654 from Doug Piner · Rule change · TB 25-02 (2025-02 Fastrack)

slowerEP BMW Z3 2.5L requires 52mm flat plate intake restrictor; Z3 2.8L 55mm; 328i/is E36 58mm; 328i/ci E46 58mm; 325i/is E46 56mm; 325i/is E36 56mm; 325is M-Technic 56mm.

In EP Spec Lines, add to Notes as follows:
BMW Z3 2.5LL "(Effective 2/21/2025) 52mm Flat Plate Intake Restrictor is required."
BMW Z3 2.8L (97-00): "(Effective 2/21/2025) 55mm Flat Plate Intake Restrictor is required."
BMW 328i/is E36 (96-99): "(Effective 2/21/2025) 58mm Flat Plate Intake Restrictor is required."
BMW 328i/ci E46 (01-06): "(Effective 2/21/2025) 58mm Flat Plate Intake Restrictor is required."
BMW 325i/is E46 (01-06): "(Effective 2/21/2025) 56mm Flat Plate Intake Restrictor is required."
BMW 325i/is E-36 (92-95): "(Effective 2/21/2025) 56mm Flat Plate Intake Restrictor is required."
BMW 325is M-Technic (1994): "(Effective 2/21/2025) 56mm Flat Plate Intake Restrictor is required."

Cal Club 2025 → Cal Club 2026 2025-02-22 to 2026-02-21

2025-03-01 FP Request Competition Adjustment to BMW Z3 2.5L

#37120 from Tim Schreyer · Rule change · TB 25-01 (2025-01 Fastrack)

slowerEP BMW Z3 and 3-series models get smaller intake restrictors: Z3 2.5L to 52mm, Z3 2.8L to 55mm, 328i to 58mm, 325i to 56mm.

In EP Spec Lines, change Notes as follows:
BMW Z3 2.5LL "(Effective 3/1/2025) ~~56mm~~ 52mm Flat Plate Intake Restrictor is required."
BMW Z3 2.8L (97-00): "(Effective 3/1/2025) ~~59mm~~ 55mm Flat Plate Intake Restrictor is required."
BMW 328i/is E36 (96-99): "(Effective 3/1/2025) ~~62mm~~ 58mm Flat Plate Intake Restrictor is required."
BMW 328i/ci E46 (01-06): "(Effective 3/1/2025) ~~62mm~~ 58mm Flat Plate Intake Restrictor is required."
BMW 325i/is E46 (01-06): "(Effective 3/1/2025) ~~60mm~~ 56mm Flat Plate Intake Restrictor is required."
BMW 325i/is E-36 (92-95): "(Effective 3/1/2025) ~~60mm~~ 56mm Flat Plate Intake Restrictor is required."
BMW 325is M-Technic (1994): "(Effective 3/1/2025) ~~60mm~~ 56mm Flat Plate Intake Restrictor is required."

2025-03-01 FP Interpretation of Production Rules on Mirrors

#37235 from Lawrence Slivinski · Rule change · TB 25-03 (2025-03 Fastrack)

neutralEP, FP, HP: interior or exterior mirrors meeting rule 9.3.36 now permitted.

In GCR, add new rule as Section 9.1.5.E.10.f:
"Any interior or exterior mirror(s) that meets rule 9.3.36 may be used."

2025-03-01 FP FP Class Adjustments

#37458 from Production Committee · Rule change · TB 25-01 (2025-01 Fastrack)

slowerFP Acura Integra and Honda Civic models get smaller 51mm intake restrictors, down from 55mm; Del Sol VTEC weight increases to 2290–2405 lbs.

In FP SPEC LINES, change Notes as follows:
Acura Integra (90-93): "(Effective 3/1/2025) ~~55mm~~ 51mm Flat Plate Intake Restrictor is required."
Acura Integra LS (94-01): "(Effective 3/1/2025) ~~55mm~~ 51mm Flat Plate Intake Restrictor is required."
Acura Integra GSR (92-93): "(Effective 3/1/2025) ~~55mm~~ 51mm Flat Plate Intake Restrictor is required."
Honda Civic Si (99-00): "(Effective 3/1/2025) ~~55mm~~ 51mm Flat Plate Intake Restrictor is required.
In FP SPEC LINES, change as follows:
Honda Civic Del Sol VTEC (94-97): "
Weight: "(Effective 3/1/2025) ~~2265 *2322 **2378~~ 2290 *2347 **2405

Show 1 more lines

Notes: "(Effective 3/1/2025) ~~55mm~~ 51mm Flat Plate Intake Restrictor is required."

2025-03-01 FP Weight Reduction for Honda S2000

#37466 from Michael Unger · Rule change · TB 25-03 (2025-03 Fastrack)

fasterEP Honda S2000 1997cc base loses 75 lbs to 2375; 2157cc base loses 60 lbs to 2450.

In EP, Spec Lines make the following weight changes:

A specification table follows in the original; it is not shown here.

2025-03-01 FP Mazda 1999 Miata 1.8L

#37488 from Joe Carr · Rule change · TB 25-03 (2025-03 Fastrack)

fasterEP Mazda MX-5/Miata 99-05 minimum weight drops to 2100 lbs, 2153 lbs with power adder, 2205 lbs with two adders.

In EP Spec Lines, make the following weight change:
Mazda MX-5 /Miata (99-05):
"~~2150~~ 2100
*~~2204~~ 2153
**~~2258~~ 2205"

2025-03-01 FP Errors & Omissions

#37648 from Bryan Floyd · Rule change · TB 25-03 (2025-03 Fastrack)

neutralFP GTL Volkswagen Jetta Mark IV 4dr FWD 98.2 wheelbase newly classified.

In FP Spec Lines, Appendix N, GTL-FP Cars - Volkswagen, classify Jetta Mark - IV as follows:
GTL-FP Cars - VOLKSWAGEN
Model Years Body Style Drive-line Wheelbase (in) Notes
Jetta Mark - IV 4dr FWD 98.2

2025-03-01 FP GTL/FP consolidation 2025 Rules

#37659 from James Gregorius · Rule change · TB 25-03 (2025-03 Fastrack)

neutralFP Spec Lines option: carburettor chokes permitted as alternative to SIR, same size as listed SIR.

In FP Spec Lines, Appendix N: L.9, Fuel Injection System, add the following:
"As an option, induction system “Chokes” may be used where a SIR is required. Said chokes shall be fitted to each barrel of
carburetor/throttle body and all airflow into engine must pass through them. Choke size will be the same as listed SIR unless
noted."

2025-04-01 FP Request for Classification of Chevrolet Spark

#37755 from Kristian Smith · Rule change · TB 25-04 (2025-04 Fastrack)

neutralChevrolet Spark 16-22 classified HP Pre at 1850 lbs minimum weight, fuel injected, 1399 cc.

In HP Spec Lines, classify the Chevrolet Spark (16-22):

A specification table follows in the original; it is not shown here.

2025-04-01 FP Request to Lower Ford Festiva Minimum Weight to 1600 LBS

#37939 from Doug DeRonne · Rule change · TB 25-04 (2025-04 Fastrack)

fasterHP Ford Festiva 88-93 minimum weight drops to 1600 lbs, variants to 1640 and 1680 lbs; compression ratio raised to 11.0:1.

In HP Spec Lines "Ford Festiva (88-93)" change as follows:
Weight:
"~~1700~~ 1600
*~~1743~~ 1640
**~~1785~~ 1680"
Notes:
"Compression ratio limited to ~~10.5~~ 11.0:1. Valve lift limited to .450”."

2025-05-01 STL E&O: SMX Allowance in STL

#37945 from Greg Amy · Rule change · TB 25-05 (2025-05 Fastrack)

unclearSTL Mazda MX5 Challenge minimum weight now references GCR 9.1.7.1 instead of 2500 lbs; spec components removed, only alternative tires allowed.

In STL Spec Lines, Table B, Mazda Spec MX5 Challenge, change as follows:
Minimum Weight: "~~2500~~ See 9.1.7.1."
Notes: "~~Mazda MX5 Challenge car must utilize the following components: Roush CNC cylinder head 0000-01-5300,Mahle~~
~~standard or +0.005 0000-01-5310, OEM camshaft, 11:1 compression ratio, header 0000-06-5407-NC, exhaust 0000-06-5427-NC,~~
~~cold air intake 0000- 06-5150-KT, ECU flash 0000-01-5379, Pagid front brake pads 0000-03-5104-SP or endurance pads 0000-03-~~
~~5104-EN, Pagid rear brake pads 0000-03-5114-SP or endurance pads 0000-03-5114-EN, Penske front shock 0000-04-5291-SA,~~
~~Penske rear shock 0000-04-5292-SA, Penske rear mount kit 0000-04-5358, Front mount kit 0000-04-5359, Front offset bushing~~
~~0000-04-5407-NC, Eibach front springs 0000-04-9700-08, Eibach rear springs 0000-04-9400-07, Eibach helper springs 0000-04-~~

Show 5 more lines

~~9926, Eibach front sway bar 0000-04-5306-FT, Eibach rear sway bar 0000-04-5306-RR, Interior finish panels 0000-07-5822, C&R~~
~~radiator/oil cooler assembly 0000-01-5504-CR, Oil cooler adapter and lines 0000-01-5511-KT, ACT clutch 0000-02-5004-G6,~~
~~wheels 17x8 #0000-04-5706-GM, # 0000- 04-5706-SL, and Toyo RR 235-40-17 dry, Toyo RA1 235-40-17 wet. Alternative tires on~~
~~17x7 wheels per STL rules. No other Super Touring modifications or allowances permitted except as noted in this spec line.~~ Must
conform completely to GCR 9.1.7.1, except alternative tires (only) per STL regs allowed."

Applies to Mazda Miata on this page: Jared Korth, Ricardo Arruda, Gavin Wardle, Ryan Gutile, Bryce Johnson, Andy Chittum, Adrian Comstock

2025-05-01 P Add missing punctuation marks

#38150 from Club Racing Board · Rule change · TB 25-05 (2025-05 Fastrack)

neutralClass P adds clarification notes on restrictor requirements, throttle bodies, Mazda 12A engine spec, and P2 auto-based engine rules.

In P Engine Table, Spec Line D notes, add the following:
"No restrictor required at 1150 lbs. minimum weight."
In P Engine Table, Spec Line G notes, add the following:
"Group CN non-composite chassis with Honda K20A-FD2 may use unrestricted individual throttle bodies at 1500 lbs. minimum
weight."
In P Table 1, Beasley B2 spec line notes, add the following:
"Engine must be Mazda 12A rotary with 40.5mm venturi. Car must comply with all other Prototype requirements."
In P Table 1, P2 cars built to 2000cc auto-based specification spec line notes, add the following:

Show 3 more lines

"Car must comply with all other P2 rules applicable to cars using stock production-based four-cylinder automotive engines.
Note: Competitors are also free to modify their cars to comply with the general Prototype rules and Engine Table Spec Line H
instead."

2025-06-01 FP Base Weight Adjustment for H-Production X1/9 Spec Lines

#38255 from Matthew Brannon · Rule change · TB 25-06 (2025-06 Fastrack)

fasterHP Fiat X-1/9 base weights reduced 50–53 lbs across 1300 and 1500 spec lines.

In HP Spec Lines, change Weight as follows:
Fiat X-1/9 & Bertone1500: “~~1790~~ 1740 *~~1835~~ 1784 **~~1880~~ 1827”
Fiat X-1/9 1300: “~~1650~~ 1600 *~~1691~~ 1640 **~~1733~~ 1680”
Fiat X-1/9 1300: “~~2060~~ 2010”
Fiat X-1/9 1500: “~~1950~~ 1900”

2025-07-01 FP BMW Z4 update

#38490 from Bryce McGuire · Rule change · TB 25-07 (2025-07 Fastrack)

slowerEP BMW Z4 03-05 restricted to 52mm flat plate intake restrictor.

In EP Spec Lines, BMW Z4 (03-05), add to Notes the following:
“52mm Flat Plate Intake Restrictor.”

2025-07-01 FP EP Fiat 124 Spider Competition Adjustment Request

#38498 from John Baucom · Rule change · TB 25-07 (2025-07 Fastrack)

fasterEP Fiat 124 Spider 1600 & 2000 weight drops 50 lbs to 2000; carburetors gain 2mm chokes to 36mm.

In EP Spec Lines, Fiat 124 Sport Spider 1600 & 124 Spider 2000, change as follows:
Weight: "~~2050~~ 2000"
Carburetor No. & Type: "(2) Weber 40 IDF-40IFI, (2) Solex C40P116, 34 36mm choke(s) req’d, (2) Weber 45DCOE w/ 34 36 mm
choke(s) on I.R. manifold or fuel injection."

2025-08-01 STL Lotus Weight Reduction

#38772 from Club Racing Board · Rule change · TB 25-08 (2025-08 Fastrack)

fasterSTL/STU Lotus weight reduced: Evora GT4 to 2700 lbs, Elise Cup R to 2250 lbs, Elise/Exige SC to 2450-2550 lbs.

In 9.1.2. GT2/ST Spec Lines, Lotus Evora GT4, change Weight as follows:
"~~2750~~ 2700"
In STU Table B: Alternate Vehicle and Engine Allowances, change Weight as follows:
Lotus Elise Cup R: "~~2300~~ 2250"
Lotus Elise SC/ Lotus Exige SC: ~~"2300~~ 2550
~~2500~~ 2450"

2025-08-01 P RM 25-05 - Prototype Engine Table A, 2 Cycle Restrictor Change

#38929 from Club Racing Board · Rule change · TB 25-09 (2025-09 Fastrack)

slowerPrototype Engine Table A 2-cycle restrictor reduces from 40mm to 38mm venturi size.

Effective 8/1/25 in Prototype Engine Table, Spec Line A, change the restrictor as follows:
"~~40mm~~ 38mm Restricted Venturi Size"

2025-09-01 P 13B Rotary Engine Rules Change Request

#38856 from Jason Vinkemulder · Rule change · TB 25-09 (2025-09 Fastrack)

unclearP class 13B rotary engine restrictor changes to 40mm SIR fuel injection or 41.5mm venturi carburetor.

Effective 9/1/25 in Prototype Engine Table, Spec Line K, change the restrictor as follows:
"40mm SIR with fuel injection or 41.5mm venturi with carburetor"

2025-09-01 P Add Radical Cup series Radical SR3 spec line to Table 1

#38916 from Club Racing Board · Rule change · TB 25-09 (2025-09 Fastrack)

neutralPrototype class adds Radical SR3 spec line to Table 1 effective 9/1/25.

Effective 9/1/25 in Prototype Table 1 (Spec Line Cars), add the following:

2025-09-01 P Clarify spec line cars language

#38943 from Club Racing Board · Rule change · TB 25-09 (2025-09 Fastrack)

neutralPrototype P2 cars may now run P2 spec or modified Prototype spec in Prototype class; clarified language and added Radical Cup series table.

Effective 9/1/25, in Prototype, GCR section 9.1.8.B.K, change as follows:
"~~P2 cars may compete in either the Prototype class or the P2 class but must participate in the Prototype class to the extent~~
~~necessary to qualify for an invitation to the Runoffs in Prototype.~~ P2 cars may be modified to comply with the general Prototype
rules and Prototype Engine Table or may continue to run in P2 specification in the Prototype class as permitted in Table 1 below."
Table 1 (Spec Line Cars)

A specification table follows in the original; it is not shown here.

2025-10-01 FP HP Plymouth Arrow spec omission

#38995 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

neutralHP Plymouth Arrow transmission max speeds clarified to 4 or 5.

In HP Spec Lines, Plymouth Arrow (76-80), add the following wording to Trans. Speeds(max):
"4 or 5"

2025-10-01 FP Add Wheel Diameter to Appendix G

#39008 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

neutralEP, FP, HP wheel diameter added to Appendix G as absolute maximum specification.

In Appendix G.2.3, change as follows:
"Rim width and diameter are is absolute maximums."

2025-10-01 FP Add TB ID tolerance to general Prod rules

#39009 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

neutralEP, FP, HP throttle body inside dimensions must remain stock with +/-.25mm tolerance; butterfly dimensions stock in FP, HP only.

In GCR, Section 9.1.5.E., change as follows:
9.1.5.E.1.b.4: "The inside dimensions of the throttle body casting/housing (as measured at the throttle butterfly) must remain
stock (tolerance of +/-.25mm), but the throttle body can otherwise be ported and polished."
9.1.5.E.2.b.4: "The inside dimensions of the throttle body casting/housing and all dimensions of the throttle butterfly must
remain stock (tolerance of +/-.25mm)."

2025-11-01 FP Please Lower Weight of 280Z

#38871 from Matthew Miller · Rule change · TB 25-09 (2025-09 Fastrack)

fasterEP Nissan 280Z minimum weight reduced from 2560 to 2400 lbs.

In EP Spec Lines, Nissan 280Z, change Weight (lbs) as follows:
"(Effective 11/1/2025) ~~2560~~ 2400
*~~2624~~ 2460
**~~2688~~ 2520"

2025-11-01 FP Miata Weight Adjustment Follow Up

#38949 from Don Tucker · Rule change · TB 25-10 (2025-10 Fastrack)

fasterEP Mazda MX-5 1.8L 90-97 weight reduced to 2125 lbs from 2150 lbs.

In EP Spec Lines, Mazda MX-5 / Miata 1.8L (90-97), Effective 11/1/2025 make the following weight change:
"~~2150~~ 2125"

2025-11-01 FP Weight Break for 1098 Midget / Sprite

#38970 from Kendall Jones · Rule change · TB 25-10 (2025-10 Fastrack)

fasterHP Austin-Healey Sprite/Midget 1098cc minimum weight drops 80 lbs to 1550.

In HP Spec Lines, Austin-Healey Sprite/Midget 1098cc, Effective 11/1/2025make the following weight change:
"~~1630~~ 1550"

2025-11-01 FP HP Volvo 142 spec omission

#38994 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

slowerHP Volvo 142/142E gains compression ratio limit 12.0:1 and valve lift limit .425".

In HP Spec Lines, Volvo 142/142E P-1800 Engine, Effective 11/1/2025 add the following wording to Notes:
"Comp. Ratio limited to 12.0:1. Valve lift limited to .425”."

2025-11-01 FP HP Mini DOHC 1.6

#38996 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

slowerHP Mini Cooper 07-15 valve lift reduced to .390", from .450".

In HP Spec Lines, Mini Cooper (07-13) (includes 09-15 convertible and 12-15 Coupe), Effective 11/1/2025 make the following
changes to the Notes:
"Compression ratio limited to 11.0:1, Valve lift limited to ~~.450”~~.390"."

2025-11-01 FP 83-88 FP Scirocco Spec Line Creation

#38997 from Production Committee · Rule change · TB 25-11 (2025-11 Fastrack)

neutralFP Scirocco 83-88 established as spec line with 1733–1803 lbs, 1715–1780 cc SOHC, 40/33 mm valves, Solex carbs or fuel injection.

In FP Spec Lines, classify Volkswagen Scirocco (83-88) as follows:

A specification table follows in the original; it is not shown here.

2025-11-01 FP Add to Rabbit description

#39019 from Production Committee · Rule change · TB 25-11 (2025-11 Fastrack)

neutralFP and HP Volkswagen Rabbit descriptions updated: Convertible changed to Cabriolet in FP; Cabriolet added to three HP engine variants.

In FP Spec Lines, make the following spec line correction:
"Volkswagen Rabbit (Includes ~~Convertible~~ Cabriolet)"
In HP Spec Lines, make the following spec line correction:
"Volkswagen Rabbit 1588 (Includes Cabriolet)"
"Volkswagen Rabbit 1715 (Includes Cabriolet)"
"Volkswagen Rabbit 1780 (Includes Cabriolet)"

2025-11-01 FP Clean-up 9.1.5.E.7e

#39025 from Production Committee · Rule change · TB 25-11 (2025-11 Fastrack)

neutralEP, FP, HP: rear drum brake to disc conversion clarified; rotors solid, diameter limited to largest front rotor permitted.

In GCR, Section 9.1.5.E.7., change as follows:
"e. Cars fitted with rear drum brakes, can convert to rear disc brakes without penalty. N~~ote that the “Brakes Std.” and “Brakes~~
~~Alt.” listings on a vehicle’s spec line do not prohibit a car that was fitted with rear drum brakes stock, from converting to rear~~
~~disc brakes under this rule~~. When converting from rear drum brakes to rear disc brakes:
1. Rear brake rotors must be solid and can be no larger in diameter than the largest permitted front brake rotor, as defined on
the vehicle’s spec line.
2. Rear calipers and mounting brackets are unrestricted but must be made of a ferrous or aluminum material. ~~The standard and~~
~~alternate brake listings on a vehicle’s specification line, does not prohibit a car that was fitted with rear drum brakes as stock~~

Show 3 more lines

~~from converting to rear disc brakes under this rule.~~
3. The “Brakes Std.” and “Brakes Alt.” listings on a vehicle’s spec line do not prohibit a car that was fitted with rear drum brakes
as stock from converting to rear disc brakes under this rule."

2025-11-01 FP Add TB size to Ford Mustang (94-98) Spec Line

#39130 from Production Committee · Rule change · TB 25-11 (2025-11 Fastrack)

neutralEP Ford Mustang (94-98) fuel injected throttle body inside diameter specified at 60.

In EP Spec Lines, Ford Mustang (94-98) add the following to the Fuel Injected Equipped Throttle Body Inside Diameter column:
"60"

2025-11-01 FP Correct Existing VW Scirocco Spec Line

#39140 from Production Committee · Rule change · TB 25-11 (2025-11 Fastrack)

fasterFP Volkswagen Scirocco: remove two engine variants (1715cc and 1780cc), lighten one variant to 1663 lbs, allow 15×7 wheels instead of 13×7.

In FP Spec Lines, Volkswagen Scirocco, change spec line as follows:

A specification table follows in the original; it is not shown here.

2025-12-01 FP TR2 Notes E&O

#39180 from Anthony Parker · Rule change · TB 25-12 (2025-12 Fastrack)

unclearEP Triumph TR2-TR4A allows 5-speed gearbox without overdrive; removes Weber carb and weight specification.

In EP Spec Lines, Triumph TR2, 3, 3A, 4, 4A, TR4, TR4A, IRS, make the following change to the Notes:
"Front apron assembly may be made of alternate material. ~~Three (3) Weber 40 DCOE on IR manifold with 28mm chokes @ 1990~~
~~lbs.~~ Laycock overdrive, may use 5 speed gearbox without overdrive."

2025-12-01 FP Balance of Power

#39187 from Jim Simaras · Rule change · TB 25-12 (2025-12 Fastrack)

slowerEP BMW Z3 2.5L restrictor reduced 52mm to 50mm, weight increased to 2550 lbs base; five other BMW models get smaller restrictors.

In EP Spec Lines, make the following changes to Restrictors:
BMW Z3 2.5L: "~~52mm~~ 50mm Flat Plate Intake Restrictor"
BMW Z3 2.8L (97-00): "~~55mm~~ 53mm Flat Plate Intake Restrictor"
BMW 328i/is E36 (96-99): "~~58mm~~ 55mm Flat Plate Intake Restrictor"
BMW 328i/ci E46 (01-06): "~~58mm~~ 55mm Flat Plate Intake Restrictor"
BMW 325i/is (E46) (01-06): "~~56mm~~ 53mm Flat Plate Intake Restrictor"
BMW 325is M-Technic (1994): "~~56mm~~ 53mm Flat Plate Intake Restrictor"
BMW 325i/is E-36 (92-95): "~~56mm~~ 53mm Flat Plate Intake Restrictor"

Show 4 more lines

In EP Spec Lines, BMW Z3 2.5L, change Weight as follows:
"~~2500~~ 2550
*~~2563~~ 2614
**~~2625~~ 2678"

2025-12-01 FP Competition Adjustment Request

#39259 from David Strittmatter · Rule change · TB 25-12 (2025-12 Fastrack)

fasterFP Lancia Scorpion minimum weight drops 80 lbs, to 1950.

In FP Spec Lines, Lancia Scorpion, change Weight as follows:
"~~2030~~ 1950"

2025-12-01 FP Factory Roll Bar Removal on VW Convertible

#39268 from Tim Linerud · Rule change · TB 25-12 (2025-12 Fastrack)

neutralFP Volkswagen Rabbit Convertible no longer required to remove factory roll bar.

In FP Spec Line, Volkswagen Rabbit (Includes Convertible), remove the following wording in Notes:
"~~Factory roll bar must be removed on Cabriolet.~~"

2025-12-01 FP FP Parity Request

#39325 from Mason Workman · Rule change · TB 25-12 (2025-12 Fastrack)

slowerFP Acura Integras and Honda Civics gain 50–79 lbs; Mazda Miata and Mercury Capri compression ratio to 11.0:1, valve lift to .425".

In FP, change Weight as follows:
Acura Integra (90-93):
"~~2235~~ 2285
*~~2291~~ 2342
**~~2347~~ 2399"
Acura Integra LS (94-01):
"~~2260~~ 2310
*~~2317~~ 2368

Show 16 more lines

**~~2373~~ 2426"
Acura Integra GSR (92-93):
"~~2325~~ 2375
*~~2383~~ 2434
**~~2441~~ 2494"
Honda Civic Del Sol VTEC (94-97):
"~~2290~~ 2340
*~~2347~~ 2399
**~~2378~~ 2457"
Honda Civic Si (99-00):
"~~2250~~ 2300
*~~2306~~ 2358
**~~2363~~ 2415"
FP Spec Lines, change Notes as follows:
Mazda Miata 1.6L (90-97): "Comp. Ratio limited to ~~10.0:1~~ 11.0:1, Valve lift limited to ~~.390”~~ .425"."
Mercury Capri 1.6L (91-94): "Comp. Ratio limited to ~~10.0:1~~ 11.0:1, Valve lift limited to ~~.390”~~ .425"."

2025-12-01 FP Adjust former-GTL Honda's with B/D-Series Engines

#39374 from Production Committee · Rule change · TB 25-12 (2025-12 Fastrack)

slowerFP Honda B/D-series engines gain 105–120 lbs minimum weight across seven variants.

In GCR, Appendix N GTL inclusion into FP, Engines - HONDA, change Disp. (cc) – Weight (lbs) as follows:
"D15 – 1493cc – ~~1895~~ 2000
D15b7 – 1493cc – ~~1895~~ 2000
D16 – 1590cc – ~~1945~~ 2055
D16A – 1590cc – ~~1945~~ 2055
B16A – 1595cc – ~~1950~~ 2065
B18 – 1797cc – ~~2050~~ 2170
B18 – 1834cc – ~~2065~~ 2185"

2026-01-01 P Request to Continue to Allow Carbon Brakes

#39476 from Jeffrey Lederman · Rule change · TB 26-01 (2026-01 Fastrack)

neutralPrototype carbon-carbon and carbon-ceramic brake rotors now permitted instead of prohibited.

In Prototype, GCR section 9.1.8.B.F.2, change as follows:
"Brake calipers may be ferrous or aluminum alloy. ~~Effective 1/1/2026, carbon-carbon and carbon-ceramic brake rotors are~~
~~prohibited and rotors must be ferrous.~~ Brake rotor material is unrestricted."

2026-01-01 STL Weight adjustment for STL

#39579 from Super Touring Committee · Rule change · TB 26-01 (2026-01 Fastrack)

slowerSTL minimum weights increase across all classes, 1300 cc gains 195 lbs to 1950, up to 1850 cc at 2500.

In GCR, Section 9.1.4.2.H.1. change Minimum Weight on chart as follows:

A specification table follows in the original; it is not shown here.

2026-02-01 FP Request Toyota 5E Series Engines

#38208 from Scott Schick · Rule change · TB 26-02 (2026-02 Fastrack)

neutralFP class adds Toyota 5E DOHC 1497cc engine, 1900 lbs minimum weight, 23mm SIR induction.

In FP Appendix N, add spec line for the Toyota 5E engine to the "Engines - TOYOTA" section:

A specification table follows in the original; it is not shown here.

2026-02-01 FP Request for Toyota 4E Series Engines

#38209 from Scott Schick · Rule change · TB 26-02 (2026-02 Fastrack)

neutralFP Toyota 4E DOHC 1331cc engine added to Appendix N with 1900 lbs minimum weight.

In FP Appendix N, add spec line for the Toyota 4E engine to the "Engines - TOYOTA" section:

A specification table follows in the original; it is not shown here.

2026-02-01 FP Dual Carbs for the Fiat X1/9

#39593 from Daniel Snow · Rule change · TB 26-02 (2026-02 Fastrack)

unclearFP Fiat X1/9 gains dual carburetor options with 28mm side-draft alternates and revised valve/transmission specs.

In FP Spec Lines, change as follows:
Fiat X-1/9 & Bertone 1300:
"(1) Weber 32 DMTR or DATRA/100 w/32mm bores
(1) 40 DCNF w/32mm choke(s)
(2) auto-type side-draft w/28mm choke(s) on I.R. manifold
Orientation of the alternate carburetor is unrestricted. The alternate carb adapter may not be thicker than 1.25”. The adapter
may have a bore larger than the throttle bore of the approved alternate carburetor.
Valve Size: (I) 35.5/(1.40) (E) 31.3/(1.23)~~30.5/(1.20) (E) 1.23~~

Show 10 more lines

Trans. Speeds: 5"
Fiat X-1/9 & Bertone:
"Fuel Injection
(1) 34 DMTR~~, (1) 36 DCNF w/34mm choke(s), or (1) 40DCNF w/34mm choke(s)~~
(1) 36 or 40 DCNF w/34mm choke(s)
(2) auto-type side-draft w/28mm choke(s) on I.R. manifold
Orientation of the alternate carburetor is unrestricted. The alternate carb adapter may not be thicker than 1.25”. The adapter
may have a bore larger than the throttle bore of the approved alternate carburetor.
Valve Size: (I) 35.5/(1.40) (E) 33.0/(1.30)
Trans. Speeds: 5 or 4"

What the rules allowed changed as listed; this does not say what any particular car ran.