BoP Lab / NOLA Motorsports Park
| Pos | Car | Driver | Class | # | Lap | Theoretical | Qual | Race | 5-lap stint | Consistency | Trap | S1 | S2 | S3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Chevrolet Corvette | David Fershtand | GT1 | 05 | 1:43.413 A-R1 | 1:42.886 | 1:45.143 A-Q1 | 1:43.413 A-R1 | 1:44.738 A-R1 | +2.487 A-R1 | 39.701 A-R1 | 35.191 A-R1 | 27.994 A-R1 | |
| 2 | Lamborghini Huracan GT3 Evo | Michael McAleenan >115% | GT1 | 3 | 2:22.769 B-P2 |
One row per driver and car (a driver who changed cars has a row for each). Each cell is that driver's best in that car across the selected events, with the session it was set in. Best 5-lap stint is the mean of the driver's quickest five consecutive race laps, and consistency is how far their median race lap sat behind their best in that race (small is a driver who does it every lap); both come from the race with the best stint. The fastest in each column is purple, and a car whose best lap is more than 115% of the fastest in its class is greyed (marked ">115%" beside the driver) and left out of the colour scale. Click a column to sort, a row to highlight it. Theoretical lap is the sum of the best sectors, whichever laps they came from, and never slower than the best lap (where a car's fastest laps were recorded without sector times, its best lap is used). The 115% mark is about the car's best lap only: a car whose best lap is within 115% of the fastest in its class is never marked. Greyed sectors with no theoretical lap mean the sector times on file do not add up to a believable lap. Letters refer to the events above; Q is qualifying, R a race.
Sectors are numbered in lap order from start/finish, whatever each event's timing called them; the loop names are SCCA timing's.
| Car | Class | Drivers | Lap | Qual | Race | Trap | S1 | S2 | S3 |
|---|---|---|---|---|---|---|---|---|---|
| Chevrolet Corvette | GT1 | 1 | 1:43.413David Fershtand | 1:45.143David Fershtand | 1:43.413David Fershtand | 39.701David Fershtand | 35.191David Fershtand | 27.994David Fershtand | |
| Lamborghini Huracan GT3 Evo | GT1 | 1 | 2:22.769Michael McAleenan |
The best any driver of each car managed across the selected events, with who set it. Spellings and model years of the same car are grouped; click a row marked ▸ to see each version. Grouping is worked out from the names, so tell us if two cars are wrongly merged or split.
#35009 from Kristofer Olson · Rule change · TB 24-05 (2024-05 Fastrack)
slowerGT2-ST Acura NSX minimum weight raised to 3000 lbs, restrictor increased to 45mm TIR.In GT2-ST Spec Lines, Acura NSX, change as follows:
Minimum Weight: "2700 3000"
Restrictor: "43 45mm TIR"
#35652 from John Bodnar · Rule change · TB 24-05 (2024-05 Fastrack)
neutralGT1 Camaro 1993-2002 classification updated; 2010- model separately classified.In GCR, Section 9.1.2.E.1.b.3., change as follows:
"Camaro (1993-2002)"
#36230 from Wayne Graham · Rule change · TB 24-09 (2024-09 Fastrack)
neutralGT1 Mazda 26B engine classified at 2850 lbs minimum weight.In GT1 Spec Lines, GT1 Approved Automobile List, Mazda, add the following:
"(Effective 11/1/2024) 26B engine = 2850 lbs."
#36254 from Michael McAleenan · Rule change · TB 24-12 (2024-12 Fastrack)
fasterGT1-ST Lamborghini Huracan GT3 Evo and 2019+ GT3 both shift to Unrestricted from 39mm and 52mm restrictors.In GT1-ST Spec Lines, Lamborghini Huracan GT3 EVO(1) (2018-), change Restrictor as follows:
"2 X 39mmUnrestricted"
In GT1-ST Spec Lines, Lamborghini Huracan GT3 (2019-), change Restrictor as follows:
"52mm Unrestricted"
#37045 from Robert Logsdon · Rule change · TB 25-01 (2025-01 Fastrack)
neutralGT1 LS1 Limited Prep engine added, 2600 lbs with driver, 383 cubic inches max, hydraulic roller cam, 750 cfm carb.In GCR, Section 9.1.2. GT1 Spec Lines, GT1 Approved Automobile List, LS1 V8 engine allowed with stock intake, add the
following:
"LS1 Limited Prep GT1 motor
2600 # with driver
Blocks : GM castings or aftermarket, no lightening, Max volume 383 cubic inches
Cylinder Heads: GM LS castings or aftermarket, stock valve angle, intake and exhaust ports must be in stock location, porting
and polishing allowed
Valves: No titanium valves, must be stock size for head part number
Rockers: Factory 1.7 rockers only, aftermarket trunion mod allowed
Pushrods: Free
Intake manifold: stock EFI for variant used or GM 525 carb intake or Edelbrock carb variants ie: Performer RPM, Victor, Victor Jr.
or similar.
Camshaft: Hydraulic roller only, standard journal size, lift and duration free
Timing chain: single or double roller type only
water pump: stock or aftermarket in stock location
Harmonic dampener: SFI approved,
Pistons: Factory or aftermarket flat top pistons only, valve reliefs allowed, coatings allowed
Crankshaft: Factory or forged steel aftermarket, 50 lb min. weight
Rods: GM stock or aftermarket forged steel
Carburetor: one 4150 type 750 cfm max"
#37137 from Christopher Childs · Rule change · TB 25-01 (2025-01 Fastrack)
neutralTA2 rear wing height rule clarified: OEM aerodynamic devices exempt from peak-of-roof requirement.In GCR, Section APPENDIX L. 2013 TA2 TECHNICAL REGULATIONS, B.2.c., change as follows:
"B. Aerodynamic Devices
2. Rear wing
c. The entire rear wing assembly, including the end plates and any Gurney flap, shall be mounted level
with, or below, the peak of the roof. OEM aerodynamic devices do not need to adhere to the height rule."
A specification table follows in the original; it is not shown here.
#37481 from Grand Touring Committee · Rule change · TB 25-01 (2025-01 Fastrack)
unclearGT1-ST restrictor sizes removed for 13 cars; new specs not printed in letter.In GT1-ST SPEC LINES, change as follows:
Aston Martin Vantage GT3 (2012) :
Restrictor: "2 x 41.5mm"
Audi R8 LMS Ultra GT3 (10-14) :
Restrictor: "2 x 49mm"
BMW Z4 GT3 (10-13):
Restrictor: "70mm"
Chevrolet Corvette C8 (20-):
Restrictor: "71mm- Flat Plate"
Dodge Viper GT3R (2012-):
Restrictor: "2 x 40mm"
Dodge Viper, incl Comp Coupe, ACR/ACR-X Max Displacement 8400, Weight 3200:
Restrictor: "68mm flat plate"
Ferrari 458 GT3 (2011-):
Restrictor: "2 x 43mm"
Lamborghini Gallardo GT3 (2013):
Restrictor: "2 x 47mm"
Lamborghini Huracan GT3 EVO(1) (2018-):
Restrictor: "2 X39mm"
McLaren MP12C GT3 (2013-):
Restrictor: "2 x 36mm 1.50 bar"
Lamborghini Huracan GT3 (2019-):
Restrictor: "2 x 40 mm"
McLaren MP12C GT3 (2013-):
Restrictor: "2 x 40 mm"
Mercedes Benz SLS GT3 (2011-):
Restrictor: "2 x 36 mm"
Porsche 991 GT3-R (2016):
Restrictor: "(2) 35 mm"
Porsche 997 GT3 R (2013-):
Restrictor: "65mm"
#37367 from Taz Harvey · Rule change · TB 25-03 (2025-03 Fastrack)
neutralAcura NSX GT3 EVO 22 classified in GT1 with 3500cc twin turbo V-6, 3100 lbs, max RPM 7500.In GT1 Spec Lines, GT 1 Cars - ACURA, classify Acura NSX GT3 EVO 22 as follows:
GT 1 Cars - ACURA
Model Years Body Style Drive-
line
Wheel-
base (in)
Notes
Acura NSX GT3 EVO 22 N/A 2dr RWD 103.5 Ground Clearance 50mm
In GT1 Spec Lines, GT 1 Engines - ACURA, classify Crossflow V-6 as follows:
GT 1 Engines - ACURA
Engine
Family
Engine Type Bore x
A specification table follows in the original; it is not shown here.
What the rules allowed changed as listed; this does not say what any particular car ran.