One row per driver and car (a driver who changed cars has a row for each). Each cell is that driver's best in that car across the selected events, with the session it was set in; the fastest in each column is purple, and a car whose best lap is more than 115% of the fastest in its class is greyed, marked ">" (with ">115%" beside the driver) and left out of the colour scale. Click a column to sort, a row to highlight it.
Theoretical lap is the sum of the best sectors, whichever laps they came from, and never slower than the best lap (where a car's fastest laps were recorded without sector times, its best lap is used). The 115% mark is about the car's best lap only: a car whose best lap is within 115% of the fastest in its class is never marked. Greyed sectors with no theoretical lap mean the sector times on file do not add up to a believable lap. Letters refer to the events above; Q is qualifying, R a race.
Sectors
S1 SF → IM1 0.65 mi
S2 IM1 → IM2 0.75 mi
S3 IM2 → SF 1.17 mi
Spd In → Out 0.03 mi
Sectors are numbered in lap order from start/finish, whatever each event's timing called them; the loop names are SCCA timing's.
By car
Car
Class
Drivers
Best lap
Best qual
Best race
Best trap
Best S1
Best S2
Best S3
Mazda RX-3
STU
1
1:50.913Tony Rivera
1:50.913Tony Rivera
1:52.737Tony Rivera
135.2Tony Rivera
30.415Tony Rivera
32.456Tony Rivera
47.999Tony Rivera
Mazda Miata
STU
1
1:51.602Whitfield Gregg
2:02.264Whitfield Gregg
2:01.538Whitfield Gregg
116.3Whitfield Gregg
30.652Whitfield Gregg
32.263Whitfield Gregg
48.687Whitfield Gregg
BMW M3
STU
1
1:52.380Wilson Powell
1:55.401Wilson Powell
1:53.843Wilson Powell
102.6Wilson Powell
30.577Wilson Powell
32.372Wilson Powell
49.215Wilson Powell
Honda S2000
STU
1
1:53.640Rylan Hazelton
1:55.834Rylan Hazelton
1:53.640Rylan Hazelton
134.8Rylan Hazelton
30.582Rylan Hazelton
32.779Rylan Hazelton
49.779Rylan Hazelton
BMW 330
STU
1
1:56.492Sean Lovett
1:56.492Sean Lovett
1:57.049Sean Lovett
133.7Sean Lovett
31.816Sean Lovett
33.669Sean Lovett
50.941Sean Lovett
Nissan 300ZX
STU
1
1:59.183James Slechta
1:59.183James Slechta
2:00.458James Slechta
132.0James Slechta
32.882James Slechta
34.528James Slechta
51.773James Slechta
Mazda MX-5
STU
2
1:59.707Oscar Jackson
2:04.115Dale Shoemaker
1:59.707Oscar Jackson
125.9Dale Shoemaker
32.339Oscar Jackson
34.219Oscar Jackson
52.330Oscar Jackson
Mazda RX-7
STU
1
2:00.248Michael Lewis
2:00.248Michael Lewis
130.4Michael Lewis
32.729Michael Lewis
34.570Michael Lewis
52.880Michael Lewis
The best any driver of each car managed across the selected events, with who set it. Spellings and model years of the same car are grouped; click a row marked ▸ to see each version. Grouping is worked out from the names, so tell us if two cars are wrongly merged or split.
Rule changes between these events
Cal Club 2025 → Cal Club 2026 2025-02-22 to 2026-02-21
STU BMW N54/N55 Engine Allowance Follow Up
#37447 from Martin Sarukhanyan · Rule change · TB 25-03 (2025-03 Fastrack)
In STU Spec Lines, Table A, classify BMW N54/N55 as follows: STU Maximum Displacement (cc's) Minimum Weight Notes BMW N54/N55 3.0 Chart +3% (DI) Short blocks, heads, and intakes may be freely swapped within these engine designations. N54 twin turbo not allowed
STU STU Mini Cooper pulley size clarification re: letter #36980
In STU Spec Lines, Mini Cooper S SC, add to notes: 2100: "May run a 2.285 2.185 diameter pulley."
STU Question About a Weight Modifier
#37782 from Peter St Pierre · Rule change · TB 25-03 (2025-03 Fastrack)
In STU Spec Lines, Table A, Honda K20C1 Turbo I4, add to Notes the following: "The 3% DI weight adder does not need to be applied."
STU Increase Minimum Weight
#37919 from Club Racing Board · Rule change · TB 25-03 (2025-03 Fastrack)
In STU Spec Lines, Table C: STU-GT3U, change Minimum Weight as follows: "150 250 pounds"
STU Wheel Size Inconsistency
#38018 from David Fiorelli · Rule change · TB 25-05 (2025-05 Fastrack)
In GCR, Section 9.1.4.1.F.1., change as follows: "Wheels may not exceed 18 inches in diameter. or 8.0 inches in width for vehicles 2950 lbs. and under minimum allowed race weight. Vehicles over 2850 minimum allowed race weight may use a 9 inch wide wheel. Cars equal to or less than 2,850 lbs. minimum allowed race weight may not use wheels wider than 8 inches. Cars greater than 2,850 lbs. minimum allowed race weight may not use wheels wider than 9 inches."
STU Table C: STU-GT3U Clarification
#38268 from Club Racing Board · Rule change · TB 25-05 (2025-05 Fastrack)
In STU Spec Line, Table C: STU-GT3U, change as follows: Minimum Weight: “Current GT3 race weight plus 250 225 pounds” Notes: "DOT approved tire with maximum section width of 245. GT3 cars base wheel is a maximum of 15”x9”. 18”x9” wheels allowd with a 3% weight addition. GT3 cars utilizing 15”x7” wheels are limited to a maximum section width of 225 with a 25 pound weight reduction" "All GT3U (Majors and Runoffs) cars using up to 15"x7" wheels limited to 225 section width tires shall run at current GT3 race weight plus 225lbs. All Gt3U cars shall run a DOT approved tire with a maximum section width of 245. GT3U cars are allowed optional 15"x9" wheels with a 1.5% weight addition or up to 18"x9" wheels with a 3.0% weight addition to the total weight
Show 1 more lines
including the 225 lbs."
STU 2.8-3.2L N/A Engine Allowances
#38007 from Ben Slechta · Rule change · TB 25-07 (2025-07 Fastrack)
In GCR, Section 9.1.4.G.1, add the following: "A maximum section width of 245 is permitted. Cars over 3150 lbs. may run a 275 tire with a 2% weight adder."
STU 2006-2015 Mazda Miata Intake Manifold
#38422 from German Candelario Candelario · Rule change · TB 25-07 (2025-07 Fastrack)
In STU, Table A, Mazda MZR (LF, L3, L5), change Notes as follows: "May use Goodwin Part # 61-2510 or Gato Performance Part #31972 Intake manifold . "
STU Requesting Approval of the JDM Honda h23a
#38489 from Eric Fiest · Rule change · TB 25-07 (2025-07 Fastrack)
In STU, Table B, classify Honda JDM H23a as follows: STU Maximum Displacement (cc's) Minimum Weight Notes Honda JDM H23a 2259 Chart Must meet all ST engine regulations.
STU STU-TCR Adjustments
#38723 from Club Racing Board · Rule change · TB 25-08 (2025-08 Fastrack)
In STU Spec Lines, Table C: STU-GT3U, GT3-TCR, change as follows: Remove the current TCR spec line and add the TCR spec lines from GT3 that are being removed, adding the below to the notes. "DOT approved tire with maximum section width of 245. May run DOT approved tire with maximum section width of 275 with 100 150 pound weight adder. May not run A-compound with 275. STU-TCR spitters and side valance must comply with 9.1.4.D.3.f. STU-TCR chassis ride height must comply with 9.1.4.1.A.1."
STU Lotus Weight Reduction
#38772 from Club Racing Board · Rule change · TB 25-08 (2025-08 Fastrack)
In 9.1.2. GT2/ST Spec Lines, Lotus Evora GT4, change Weight as follows: "2750 2700" In STU Table B: Alternate Vehicle and Engine Allowances, change Weight as follows: Lotus Elise Cup R: "2300 2250" Lotus Elise SC/ Lotus Exige SC: "2300 2550 2500 2450"
STU Lotus Weight Reduction E&O
#38919 from Club Racing Board · Rule change · TB 25-09 (2025-09 Fastrack)
In STU Table B: Alternate Vehicle and Engine Allowances, change Weight as follows: Lotus Elise SC/ Lotus Exige SC: "2450 2250"
STU Non-Homologated Engine Swaps - Specifically K24A2 w/ Honda CRZ
#38746 from William Rori · Rule change · TB 25-09 (2025-09 Fastrack)
In STU Spec Lines, Table B: Alternate Vehicle and Engine Allowances, Honda K24, change Weight as follows: "(Effective 11/1/2025) Chart + 2%"
STU Turbo Inlet Restrictor Table
#38961 from John Weisberg · Rule change · TB 25-12 (2025-12 Fastrack)
In GCR, Section 9.1.4.H.3, change chart as follows:
A specification table follows in the original; it is not shown here.
STU 275 Tire Rule
#38983 from Peter Federlin · Rule change · TB 25-12 (2025-12 Fastrack)
In GCR, Section 9.1.4.G.1., change as follows: "A maximum section width of 245 is permitted. Cars over 3150 lbs. may run a 275 tire with a 2% weight adder."
STU STU Honda Engine weight penalty
#39375 from Super Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)
In STU Spec Lines, Table B: Alternate Vehicle and Engine Allowances, change Minimum Weight as follows: Honda K20: "Chart + 2%" Honda K24: "Chart + 2%"
STU Request for Permission on Aftermarket Turbo Kit and Intake
#39529 from John Grim · Rule change · TB 26-01 (2026-01 Fastrack)
In STU Spec Lines, Table A: Alternate Vehicle and Engine Allowances, Mazda MZR (LF, L3, L5), change Notes as follows: "Short blocks, heads, and intakes may be freely swapped within these engine designations. May use Goodwin Part # 61- 2510 or, Gato Performance Part #31972 or Jack Spania Racing 70 mm sheet-metal aluminum Intake manifold. Must use stock throttle body or Acura part number 16400-PND-A17." In STU Spec Lines, Table A: Alternate Vehicle and Engine Allowances, classify Mazda MZR (LF, L3, L5) Turbo as follows: STU Maximum Displacement (cc's) Minimum Weight Notes Mazda MZR (LF, L3, L5) Turbo
Show 7 more lines
Varies Chart Short blocks, heads, and intakes may be freely swapped within these engine designations. May use Jack Spania Racing 70 mm sheet-metal aluminum Intake manifold. Must use stock throttle body or Acura part number 16400-PND- A17. Fab9 Tuning bottom-mount turbo kit approved with one of the STU approved Turbos.
What the rules allowed changed as listed; this does not say what any particular car ran.