One row per driver and car (a driver who changed cars has a row for each). Each cell is that driver's best in that car across the selected events, with the session it was set in. Best 5-lap stint is the mean of the driver's quickest five consecutive race laps, and consistency is how far their median race lap sat behind their best in that race (small is a driver who does it every lap); both come from the race with the best stint. The fastest in each column is purple, and a car whose best lap is more than 115% of the fastest in its class is greyed (marked ">115%" beside the driver) and left out of the colour scale. Click a column to sort, a row to highlight it.
Theoretical lap is the sum of the best sectors, whichever laps they came from, and never slower than the best lap (where a car's fastest laps were recorded without sector times, its best lap is used). The 115% mark is about the car's best lap only: a car whose best lap is within 115% of the fastest in its class is never marked. Greyed sectors with no theoretical lap mean the sector times on file do not add up to a believable lap. Letters refer to the events above; Q is qualifying, R a race.
Sectors
S1 SF → In
S2 In → IM3
S3 IM3 → SF
Spd In → Out 0.02 mi
Sectors are numbered in lap order from start/finish, whatever each event's timing called them; the loop names are SCCA timing's.
By car
Car
Class
Drivers
Lap
Qual
Race
Trap
S1
S2
S3
Ford Mustang
T3
5
2:06.752Marshall Mast
2:06.770Marshall Mast
2:08.115Marshall Mast
136.7Marshall Mast
33.910Marshall Mast
42.572Marshall Mast
49.175Marshall Mast
Ford Mustang
T3
4
2:06.752Marshall Mast
2:06.770Marshall Mast
2:08.115Marshall Mast
136.7Marshall Mast
33.910Marshall Mast
42.572Marshall Mast
49.175Marshall Mast
Ford Mustang EcoBOOST
T3
1
2:14.379Randy Johnson
2:14.379Randy Johnson
2:15.450Randy Johnson
128.5Randy Johnson
36.280Randy Johnson
45.529Randy Johnson
51.885Randy Johnson
Nissan 350Z
T3
2
2:09.713William Bolt
2:10.463William Bolt
2:09.713William Bolt
137.6Ben Slechta
34.928Ben Slechta
43.735William Bolt
50.496William Bolt
Mazda MX-5 Global Cup
T3
2
2:11.387Colin Duffy
2:11.536Colin Duffy
2:11.387Colin Duffy
125.0Colin Duffy
35.808Colin Duffy
44.008Colin Duffy
51.222Colin Duffy
Mazda MX-5
T3
1
2:11.387Colin Duffy
2:11.536Colin Duffy
2:11.387Colin Duffy
125.0Colin Duffy
35.808Colin Duffy
44.008Colin Duffy
51.222Colin Duffy
Mazda MX-5 Global Cup
T3
1
2:17.428Camden Jones
2:17.677Camden Jones
2:17.428Camden Jones
122.7Camden Jones
36.886Camden Jones
47.052Camden Jones
52.984Camden Jones
BMW 330ci
T3
2
2:14.044Andrea King
2:15.357Andrea King
2:14.044Andrea King
130.8Andrea King
35.896Andrea King
45.771Andrea King
51.890Andrea King
BMW 330ci
T3
1
2:14.044Andrea King
2:15.357Andrea King
2:14.044Andrea King
130.8Andrea King
35.896Andrea King
45.771Andrea King
51.890Andrea King
BMW 330CI
T3
1
2:15.162Dinah Weisberg
2:16.402Dinah Weisberg
2:15.162Dinah Weisberg
126.9Dinah Weisberg
36.580Dinah Weisberg
45.890Dinah Weisberg
52.316Dinah Weisberg
BMW 330i
T3
1
2:15.365Edward Karabec
2:16.845Edward Karabec
2:15.365Edward Karabec
128.2Edward Karabec
36.706Edward Karabec
46.222Edward Karabec
52.423Edward Karabec
Toyota GT86
T3
1
2:15.707austen Levesque
2:18.528austen Levesque
2:15.707austen Levesque
121.3austen Levesque
37.854austen Levesque
46.659austen Levesque
52.873austen Levesque
The best any driver of each car managed across the selected events, with who set it. Spellings and model years of the same car are grouped; click a row marked ▸ to see each version. Grouping is worked out from the names, so tell us if two cars are wrongly merged or split.
Rule changes between these events
Glen Region SCCA Hoosier Super Tour @ Watkins Glen International → Finger Lakes Region SCCA Hoosier Super Tour @ Watkins Glen International 2025-06-27 to 2026-06-19
unclearBMW Spec E46 in T3 updates to SpecE46 rules Version 3.0.
In T3 Spec Lines, BMW Spec E46, change Notes as follows: "Must conform to all SpecE46 rules Version 2.10. Version 1.1 dated Jan. 6, 2025. Version 3.0."
T3 Incorrect Touring Heading
#38451 from Terry Hanushek · Rule change · TB 25-08 (2025-08 Fastrack)
neutralT2, T3, T4 Spec Lines table header changed from T2 to ET.
In T2-T4 Spec Lines, change Table Header as follows: "T2 ET"
T3 Make the S2000 Competitive Again
#38470 from David Mead · Rule change · TB 25-08 (2025-08 Fastrack)
fasterT3 Honda S2000 wheels grow to 17x9.0 front and 17x10 rear; tyres widen to 255 front and 275 rear.
In T3 Spec Lines, Honda S2000 (all) (00-09), change as follows: Max Wheel Size: "(Effective 11/1/2025) 17 x 9.0 (f) 17 x 10 (r)" Tire size: "(Effective 11/1/2025) 245 255 (f) 275 (r)" Notes: "(Effective 11/1/2025) CAI allowed, Header allowed."
T3 ND Gearset Request for T4
#39166 from Josh Smith · Rule change · TB 25-11 (2025-11 Fastrack)
neutralT3 and T4 Mazda MX-5 Miata models add approved gear kit PT#-0000-02-6100 to notes.
In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-24), add to Notes the following: "Gear kit Kit PT#- 0000-02-6100." In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), add to Notes the following: "Gear kit Kit PT#- 0000-02-6100." In T3 Spec Lines, Mazda MX-5 Miata (16-18), add to Notes the following: "Gear kit Kit PT#- 0000-02-6100." In T3 Spec Lines, Mazda MX-5 Global Cup Miata (2016-2021) ND1, ND, add to Notes the following: "Gear kit Kit PT#- 0000-02-6100."
Applies to Mazda MX-5 Global Cup on this page: Colin Duffy, Camden Jones
T3 ND Spec Lines Wrong PT#'s
#39170 from Josh Smith · Rule change · TB 25-11 (2025-11 Fastrack)
neutralT4 Mazda MX-5 Miata/Club/RF (19-24) and (16-18) remove discontinued hardtop part #0000-07-5901; T3 MX-5 Miata (16-18) and Global Cup ND (16-21) same.
In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-24), change Notes as follows: "Factory bolt-in roll bar/ cross member may be removed to facilitate roll cage installation. The following item(s) must remain stock: transmission differential unless specified below. Retractable hardtop option permitted but must be disabled from moving action and positively fastened. Any OEM or aftermarket hardtop is permitted that retains the OEM roof silhouette, including Mazda hardtop part #0000-07-5902-ND and part #0000-07-5901 (discontinued DG Motorsports). 29mm (f) 16mm (r) sway bars allowed. 3rd and 4th gear may be replaced with the following parts- (0000-02-5803-02, 0000-02-5803-01, 0000-02-5804-02, 0000-02-5804-01). Suspension package permitted with a 100 lbs. weight increase that includes the following parts: front springs #0000-04-9700-08, springs up to 500lb front and 300lb rear allowed. Mazda tower brace 0000-04-5626 allowed. Mazda header
Show 20 more lines
0000-06-5410 allowed." In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), change Notes as follows: "Factory bolt-in roll bar/ cross member may be removed to facilitate roll cage installation. Retractable hardtop option permitted but must be disabled from moving action and positively fastened. Any OEM or aftermarket hardtop is permitted that retains the OEM roof silhouette, including Mazda hardtop part #0000-07-5902-ND and part #0000-07-5901 (discontinued DG Motorsports). 29mm (f) 16mm (r) sway bars allowed. Up to 500lb front and 300lb rear springs allowed. Mazda Motorsports Header part #0000-06-5410 allowed. Mazda tower brace 0000-04-5626 allowed. 3rd and 4th gear may be replaced with the following parts- (0000-02-5803-02, 0000-02-5803-01, 0000-02-5804-02, 0000-02-5." In T3 Spec Lines, Mazda MX-5 Miata (16-18), change Notes as follows: "Factory bolt-in roll bar/ cross member may be removed to facilitate roll cage installation. Header permitted. Cold air intake permitted. Front strut brace permitted. Front and rear sway bars permitted up to 35mm, Springs 800 front and 800 Rear max permitted. Any OEM or aftermarket hardtop permitted that retains the OEM roof silhouette including Mazda hardtop part #0000-07-5902- ND and part #0000-07-5901 (discontinued DG Motorsports top). If a hardtop is used, latches shall be replaced with positive fasteners. Retractable hardtop option permitted but must be disabled from moving action and positively fastened. In T3 Spec Lines, Mazda MX-5 Global Cup Miata (2016-2021) ND1, ND, change Notes as follows: "Shoulder harness installation must conform to FIA mounting specifications that are approved for this vehicle per section 6.2 FIA article 253, safety equipment. Must meet all ND2 MX-5 Global Cup rules. Any OEM or aftermarket hardtop is permitted that retains the OEM roof silhouette, including Mazda hardtop Mazda hardtop part #0000-07-5902-ND and #0000-07-5902-ND part #0000- 07-5901 (discontinued DG Motorsports). If a hardtop is used, latches shall be replaced with positive fasteners. OBD2 requirement does not apply. Ballast box may be removed. ND2s with sequential gearbox allowed +100 lbs.
Applies to Mazda MX-5 Global Cup on this page: Colin Duffy, Camden Jones
unclearT3 Ford Mustang EcoBoost loses optional 2-piece 355mm Brembo rotor brake kit option with 50 lb penalty.
In T3 Spec Lines, Ford Mustang EcoBoost (2015-), change Notes as follows: ", or optional 2-piece rotor 355mm max Brembo brake kit #M-2300-S allowed with +50lb penalty."
Applies to Ford Mustang on this page: Marshall Mast, Scotty B White, Daniel Moen, Philip Di Pippo, Randy Johnson
T3 Request to Allow Spec Mustang to Touring 3 in Appendix M Trim
#39196 from Roger Eagleton · Rule change · TB 26-01 (2026-01 Fastrack)
fasterT3 Ford Spec Mustang restrictor opens to 45mm, weight drops to 3400 lbs.
In T3 Spec Lines, Ford Spec Mustang, change as follows: Restrictor: "Two 44mm 45mm holes" Weight: "3450 3400"
Applies to Ford Mustang on this page: Marshall Mast, Scotty B White, Daniel Moen, Philip Di Pippo, Randy Johnson
T3 Tire Help for Spec E9X in T3
#39222 from Benjamin Phillips · Rule change · TB 26-01 (2026-01 Fastrack)
fasterT3 BMW Spec E9X tire width increases to 255 from 225; spec E9X tire or any DOT permitted.
In T3 Spec lines, BMW Spec 9X, change as follows: Car: "BMW Spec 9X BMW Spec E9X" Notes: "Must conform to all SpecE9X rules Version 2.10. Spec E9X spec tire permitted or any DOT permitted up to 225 255 permitted. No other touring allowances permitted. Engines may not be modified unless specified in the Spec E46 rules and must conform to touring tech procedures. Driver must possess a current copy of the rules. Dyno results do not ensure engine compliance. THIS SPEC LINE DOES NOT QUALIFY FOR SCCA RUNOFFS COMPETITION UNTIL IT HAS BEEN REPRESENTED IN 3 SCCA SUPER TOUR EVENTS."
T3 SpecE46 Tire Sizing
#39292 from Rob Piekarczyk · Rule change · TB 26-01 (2026-01 Fastrack)
fasterT3 SpecE46 permitted tire width increases from 225 to 245.
In T3 Spec Lines, BMW SpecE46, change Notes as follows: "Must conform to all SpecE46 rules Version 3.0. SpecE46 spec tire permitted or any DOT permitted up to 225 245 permitted. No other touring allowances permitted. Engines may not be modified unless specified in the Spec E46 rules and must conform to touring tech procedures. Driver must possess a current copy of the rules. Dyno results do not ensure engine compliance. SE46 HP limit does not apply."
T3 Alternate Placement of Fuse Panel and Electronics Request
neutralT2, T3, T4 cars may relocate under-dash electronics and fuse boxes for access after roll cage installation.
In GCR, Section 9.1.9.2.D.9.d, add the following: "8. Under-dash electronics including computers, modules and fuse boxes may be relocated so they can be easily accessed after roll cage installation."
T3 Clarify T4 Brake Rotor Allowance
#39503 from David Mead · Rule change · TB 26-01 (2026-01 Fastrack)
neutralT4 Performance now permits 1-piece alternative rotors matching spec line sizes; alternate brake kits allowed same.
In GCR, Section 9.1.9.2.D.6.a.6., change as follows: "In T2-Performance alternative rotors, including 2 piece rotors are permitted. Rotors must be within 5% of OE diameter or a maximum diameter of 360mm. In T3- Performance alternative rotors, including 2 piece rotors are permitted with a maximum diameter of 360mm. T4- Performance alternative 1-piece rotors are permitted but rotors must meet the sizes listed in the spec line. Spec lines showing alternate brake kits are also permitted to use 1-piece performance alternative rotors of the same size."
T3 Please change 2011-2014 Mustang V6 Spec Line to 2005-2014
#39558 from Matthew Miller · Rule change · TB 26-02 (2026-02 Fastrack)
neutralT3 Ford Mustang V6 Spec Line expands to include 2005-2010 chassis and body with 2011-2014 engine.
In T3 Spec Lines, Ford Mustang V6 (11-14) , add to Notes the following: "2005-2010 chassis/body permitted."
Applies to Ford Mustang on this page: Marshall Mast, Scotty B White, Daniel Moen, Philip Di Pippo, Randy Johnson
T3 Nissan 350Z Weight Request
#39598 from David Muramoto · Rule change · TB 26-02 (2026-02 Fastrack)
fasterT3 Nissan 350Z DE Motor loses 25 lbs to 3100, HR Motor loses 25 lbs to 3250.
In T3 Spec Lines, Nissan 350Z Track/ Touring/Standard/ Nismo (03-08), change Weight as follows: DE Motor: "3125 3100" HR Motor: "3275 3250"
T3 Allow Alt Bushing Material in Toe Links
#39607 from David Mead · Rule change · TB 26-02 (2026-02 Fastrack)
fasterT2-T4 adjustable toe links now allow performance alternative bushings and spherical bearings, previously prohibited except in specified examples.
In GCR, Section 9.1.9.D.5.a.1., change as follows: "T2-T4: A maximum of 3.5 degrees of negative camber is allowed on front and rear suspensions. Spec line part(s) may not be modified to increase caster and camber. Strut suspensions may adjust camber and caster by the use of eccentric bushings, eccentric bolts (crash bolts) at the strut-to-spindle, and/or by use of slotted adjustment plates at the top of the strut mounting plate. If upper strut slotted adjustment plates are used, they shall be located on existing chassis structure, utilizing the unmodified manufacturer’s original bolt holes and may not serve as reinforcement for that structure. Slotted adjustment plates (strut camber plates) may incorporate a single spherical bearing (spherical bushing) and a ball thrust bearing per strut tower. On other forms of suspension, camber and caster adjustment may be achieved by the use of shims and/or eccentric
Show 4 more lines
bushings. Adjustable toe links with spherical bearings are permitted and may serve no purpose other than adjusting toe angle. Adjustable toe links are permitted. They are allowed to have performance alternative bushings and spherical bearings. They may serve no purpose other than adjusting toe angle. Spherical bearings/bushings are not permitted in T2-T4 except for the specific examples listed in the class rules or vehicle spec line."
T3 Nissan 370Z Tire Size
#39701 from Nicolas Hammann · Rule change · TB 26-03 (2026-03 Fastrack)
fasterT3 Nissan 350Z and 370Z max tire size increases from 255 to 275.
In T3 Spec Lines, Nissan 350Z Track/ Touring/Standard/ Nismo (03-08), change Max Tire Size as follows: "255 275" In T3 Spec Lines, Nissan 370Z, incl. Nismo (2009-2022), change Max Tire Size as follows: "255 275"
fasterT3 Porsche Boxster/Boxster S 00-04 maximum wheel width increases from 8 to 9 inches.
In T3 Spec Lines, Porsche Boxster/ Boxster S (00-04), change Max Wheel Size as follows: "18 x 8 9"
T3 Request Update to T3 Camaro V6 (10-15) Spec Line
#39839 from Scott Bolster · Rule change · TB 26-03 (2026-03 Fastrack)
fasterT3 Camaro V6 (10-15) wheels increase to 20 x 9, permitted parts list updated with tower brace, shock mount, control arm reinforcement, master cylinder, rotors to 366mm, and sway bars to 28mm.
In T3 Spec Lines, Chevrolet Camaro V6 (10-15), change as follows: Max Wheel Size: "18 20 x 9" Notes: "800lb max spring F&R. SS front fascia, spoiler allowed. 1LE-SS Track Pack permitted part #23123398 . Tower Brace 22756880, red. TPR rear upper shock mount #22122, Pfadt lower control arm reinforcement # 1410135, # 009-92200, Brake Kit SS (p/n 23120542) For 2011 cars adaptor kit p/n (23484878). AC Delco Part #: 1750637 SS Master Cylinder permitted. Rear rotors up to 366mm permitted. 28mm Sway bars permitted Front and rear."
fasterT3 2015+ Mustang EcoBoost gains Ford Motorsports 6-piston 380mm brake kit, sway bars to 38mm front, 25mm rear.
In T3 Spec Lines, Ford Mustang EcoBoost (2015-), change Notes as follows: "Rear spring relocated to shock allowed. 800lbs springs (F/R) allowed. EcoBoost Performance Package allowed in part or complete. Optional: 6 speed automatic transmission (with paddle shifters). Speed Factory Intercooler, part # SF-55-002 permitted. BMR rear upper control arm camber links part #UTCA064 permitted. Non-EcoBoost Performance Pack base model 320mm front brakes, 2 piston front calipers allowed (-50lbs). Ford Motorsports 6-piston M2300V 380mm brake kit allowed with +100lb penalty, Sway bars allowed up to 35mm 38mm (F) 25mm (R)."
Applies to Ford Mustang on this page: Marshall Mast, Scotty B White, Daniel Moen, Philip Di Pippo, Randy Johnson
T3 Review Spec Lines for Camaro V-6
#40149 from Daniel Brabec · Rule change · TB 26-06 (2026-06 Fastrack)
fasterT3 Chevrolet Camaro V6 (2016-2024) loses 50mm restrictor requirement, gains 20-inch wheels, weight drops to 3350 lbs, ineligible for 2026 Runoffs.
In T3 Spec Lines, delete Chevrolet Camaro V6 1LE (2016-) in its entirety. In T3 Spec Lines, Chevrolet Camaro V6 (2016-), change as follows: Year: "(2016-2024)" Restrictor required: "50mm restrictor" Max wheel size: "18 20 x 10" Weight: "3500 3350" Notes: "1LE options permitted. Cold air intake permitted. 800lb springs (F/R) permitted. Sway bars 38mm(F), 28mm(R) permitted. **This car is not eligible for Runoffs competition in 2026**"
T3 Power of GR86/BRZ in T3
#40169 from Devin Anderson · Rule change · TB 26-06 (2026-06 Fastrack)
fasterT3 Subaru BRZ 2022+ drops 225 lbs to 2750; Toyota GR86 2022+ loses brake part allowance with 100 lb penalty.
In T3 Spec Lines, Subaru BRZ (2022+), change as follows: Weight: "2975 2750" Notes: "Any spring up to 1000 F/R permitted. Front strut tower brace permitted. SPC or SPL rear lower control arms permitted. Cold air intake allowed. Header Permitted Subaru brake parts 26292CA070 & 26292CA060 allowed. Sway bars permitted 25m (f) 22mm (r) Max. OEM Trunk Spoiler permitted- E7210CC000." In T3 Spec Lines, Toyota GR86 (2022-), change Notes as follows: "Any spring up to 750 F/R permitted. Front strut tower brace permitted. SPC rear lower control arms permitted. Cold air intake allowed. Header Permitted Toyota brake parts SU003-07197 & SU003-07198 allowed with 100 lb penalty. Sway bars permitted