Wording removed by a change is shown struck through, as in the original. 22 changes, 86 other letters.
Changes made
Request to Classify 2003–2006 Pontiac Vibe GT / Toyota Matrix XRS
#40755 from Anthony Hernandez · Rule change · TB 26-10 (2026-10 Fastrack)
In ITS Spec Lines, classify Pontiac Vibe GT (2003-2006) as follows: ITS Engine Type Bore x Stroke(mm)/ Displ. (cc) Weight (lbs) Notes: Pontiac Vibe Gt (2003-2006) 2590 In ITS Spec Lines, classify Toyota Matrix XRS (2003-2006) as follows: ITS Engine Type Bore x Stroke(mm)/ Displ. (cc) Weight (lbs) Notes: Toyota Matrix
In GCR, Section 9.1.3.A Purpose, add the following: "Turbocharged/Super charged cars are not eligible for Improved Touring competition unless explicitly listed."
Add 2009 Mini Cooper S
#38112 from Mike Kenific · Rule change · TB 25-05 (2025-05 Fastrack)
ITS Engine Type Bore x Stroke(mm)/ Displ. (cc) Weight (lbs) Notes: Mini Cooper S (09-10) 4 Cyl Turbo 77x85.8 1598cc 29mm TIR 2665
Combine ITS RX8 Spec Lines
#37382 from Raymond Blethen · Rule change · TB 25-02 (2025-02 Fastrack)
In ITS Spec Lines, combine Mazda RX-8 (04-08) and Mazda RX-8 (09-11) and adjust dates as follows: "Mazda RX-8 (04-08 04-12)"
Combine RX8 Spec Lines in ITR
#37383 from Raymond Blethen · Rule change · TB 25-02 (2025-02 Fastrack)
In ITS Spec Lines, combine Mazda RX-8 (04-08) and Mazda RX-8 (09-11) and adjust dates as follows: "Mazda RX-8 (04-08 04-12)"
90-93 Integra ITS Classing Request
#37197 from Brian Bennett · Rule change · TB 24-12 (2024-12 Fastrack)
In ITS Spec Lines, classify Acura Integra (ls/gs/rs) (90-93), as follows: ITS Engine Type Bore x Stroke(mm)/ Displ. (cc) Weight (lbs) Notes: Acura Integra (ls/gs/rs) (90-93) 4 Cyl DOHC 81.0 x 89.0 1835cc 2260 lbs.
Add Spec Miata to ITS
#36256 from Joe Stadelmann · Rule change · TB 24-10 (2024-10 Fastrack)
In ITS Spec Lines, Mazda MX-5 / Miata (99-00), add to Notes: "(Effective 11/1/2024) May be run in full compliance to Spec Miata configuration and weight or to IT specification and weight."
NC ITS correction (E&O)
#36373 from Josh Smith · Rule change · TB 24-10 (2024-10 Fastrack)
In ITS, Mazda MX-5 (06-15), change Weight as follows: "(Effective 11/1/2024) 2600 2740"
In ITS Spec Lines, MX-5 (06-10), change year as follows: "(06-10 15)"
Battery Change
#35854 from Andrew Fox · Rule change · TB 24-04 (2024-04 Fastrack)
In GCR, Section 9.1.3.D.1.h., change as follows: "Any ignition system which utilizes the original distributor for spark timing and distribution is permitted. Internal distributor components and distributor cap may be substituted. Crankfire ignition systems are prohibited unless fitted as original equipment. Any spark plugs and ignition wires may be used. Ignition timing is unrestricted. Batteries may be replaced with those of alternate manufacture provided they are of similar amp-hour capacity and weight and are fitted in the standard location. Additional battery hold-down devices may be used, and are strongly recommended. Cars originally equipped with two (2) 6-volt batteries may replace them with one (1) 12-volt battery installed in either of the original battery locations."
In ITS Spec Lines, classify BMW 325 XIT (01-05) as follows: ITR Engine Type Bore x Stroke(mm)/ Displ. (cc) Weight (lbs) Notes: BMW 325 XIT (01-05) 6 cylinder 84x75 2494cc 2658
Request T4 allowance directly in ITS
#34044 from Mark Liller · Rule change · TB 24-01 (2024-01 Fastrack)
In ITS Spec Lines, classify Mazda MX5 (06-10) as follows: ITS Engine Type Bore x Stroke(mm)/ Displ. (cc) Weight (lbs) Notes: Mazda MX5 (06-10) 4 cylinder 87.4x83.1 1998cc 2600
In ITA Spec Lines, classify Porsche 944 (2V) (83-88) as follows: ITA Engine Type Bore x Stroke(mm)/ Displ. (cc) Weight (lbs) Notes:
A specification table follows in the original; it is not shown here.
Request for Porsche 924S Reclassification to ITA
#32441 from Kevin Duffy · Rule change · TB 22-07 (2022-07 Fastrack)
In ITA Spec Lines, classify Porsche 924S (86-88) as follows: ITA Engine Type Bore x Stroke(mm)/ Displ. (cc) Weight (lbs) Notes: Porsche 924S (86-88) 4Cyl 100x78.9 2479 2865 In ITS Spec Lines, classify Porsche 944 (2V) (83-88) as follows:
Show 1 more lines
ITS Engine Type Bore x Stroke(mm)/ Displ. (cc) Weight (lbs) Notes:
A specification table follows in the original; it is not shown here.
In ITS Spec Lines, classify the following cars: ITS Engine Type Bore x Stroke(mm)/ Displ. (cc) Weight (lbs) Notes:
A specification table follows in the original; it is not shown here.
Eliminate
#30946 from Michael Chiappetta · Rule change · TB 21-10 (2021-10 Fastrack)
In ITS Spec Lines, Mazda RX-7/ Convertible (13B) (86-91), change notes as follows: "16” wheel not allowed. 5th and 6th intake port actuators and valves may be removed or disabled. "
Request to Move 83-88 Porsche 944 to ITA
#30376 from Andrew Fox · Rule change · TB 21-08 (2021-08 Fastrack)
In ITA Spec Lines, classify Porsche 944 (2V) (83-88), as follows: ITA Engine Type Bore x Stroke(mm)/ Displ. (cc) Weight (lbs) Notes: Porsche 944 (2V) (83-88)
Request to classify a 2003 Honda Accord
#28898 from Robert Gary · Rule change · TB 20-12 (2020-12 Fastrack)
In ITR, Classify the Honda Accord V6 Coupe (03-05) and (06-07) as follows: ITR Engine Type Bore x Stroke(mm)/ Displ. (cc) Weight (lbs) Notes: Honda Accord Coupe V6 03-05 6 Cyl SOHC (J30A4)
Show 5 more lines
86.0 x 86.0 2997 3175 Honda Accord Coupe V6 06-07 6 Cyl SOHC (J30A5)
In Improved Touring, GCR section 9.1.3.D.4.f, change as follows: "Traction control, if available, must be disabled by disconnecting or removing a minimum of three wheel speed sensors. Traction control must be disabled."
Request OEM hardtops for IT
#28272 from Tom Fowler · Rule change · TB 20-03 (2020-03 Fastrack)
In IT, GCR 9.1.3.D.8.f., change as follows: "Convertible tops and attaching hardware shall be completely removed. Note: Convertible model cars are permitted if they were only available as convertibles (e.g. MG Midget), or if the convertible model is specifically allowed on the vehicle spec line. Convertible models may compete with their respective OEM hardtop or aftermarket hardtop that retains the OEM silhouette. Rear glass in such hardtops may be of automotive safety glass or polycarbonate material."
Request clarification 1999 Ford Escort ZX2 S?R
#26966 from LARRY FREY · Rule change · TB 19-09 (2019-09 Fastrack)
In ITA, Ford Escort ZX2 (98-00), change the year as follows: “(98-00 03)” In ITA, Ford Escort ZX2 (98-00 03), change the weight as follows: "2400 2355"
Request clarification on 9.1.3 D1.A.2
#26237 from PRH Stark · Rule change · TB 19-05 (2019-05 Fastrack)
In GCR section 9.1.4.D.1 make changes and renumber as follows: 9.3.1.D.1. Reciprocating Engines (only) a. All air entering the intake tract shall pass through the carburetor or fuel injection air inlet (throttle body or bodies). All air must also pass through the stock air metering device, eg MAF, or AFM, etc if so equipped. Air intake source shall be within the confines of the engine compartment or stock location. (previously D.1.a.4) 4. a. All air entering the intake tract shall pass through the carburetor or fuel injection air inlet (throttle body or bodies). All air must also pass through the stock air metering device, eg
Show 51 more lines
MAF, or AFM, etc., if so equipped. Air intake source shall be within the confines of the engine compartment or stock location. 3. b. The original, standard intake manifold shall be maintained. No porting or polishing of the manifold is permitted except as allowed by rule D.1.I these rules. c. Carbureted engines a. 1. Any carburetor jets, needles, and/or metering rods may be used in the stock or approved optional carburetor(s). Alternate needle valves are permitted. Removable jets may be replaced or resized. The number of carburetors may not be changed from standard. No venturi (including secondary or auxiliary) of any carburetor may be modified in any way. 1. 2. Certain cars have optional carburetors listed. On these cars, adaptor(s) may be used to mount the optional carburetor(s), provided the adaptor serves no performance function, i.e., plenum chamber, etc. 2. 3. External throttle linkage to the standard or optional carburetor(s) may be modified or changed. Choke mechanisms, plates, rods, and actuating cables, wires, or hoses may be removed. Method of operating the secondary throttle may not be modified. (previously D.1.a.2) 5. 4. All single carbureted cars may fit an approved optional carburetor. Approved optional carburetors are: 1 Weber 32 DGV/DGAV/DGEV 1 Weber 32/36 DGV/DGAV/DGEV 1 Weber 32/36 DFV/DFAV/DFEV 1 Weber 34 DAT/DATR/DATRA/DMTR 1 Holley-Weber 5200 Weber carburetor(s) with swaged fuel inlet fitting shall be replaced by drilling and tapping the carburetor body for a threaded fitting. Fuel injection manifold(s) shall not be replaced with carburetor manifold(s) from a different model, type, or engine size in order to fit an optional carburetor. All cars equipped with multiple carburetors shall run the original induction system, except for modifications allowed by the Authorized Modifications Sections D.1.a., and D.1.a.2., above in these rules. d. Fuel injected engines 6. 1. The engine management computer may be altered or replaced. A throttle position sensor and its wiring may be added or replaced. A MAP or MAF sensor and its wiring may be added. Other existing sensors, excluding the stock air metering device, may be substituted for equivalent units. 2. External throttle linkage to the standard or optional carburetor(s) may be modified or changed. Choke mechanisms, plates, rods, and actuating cables, wires, or hoses may be removed. Method of operating the secondary throttle may not be modified. 2. External throttle linkage may be modified or changed. Electronic control of the throttle is forbidden unless fit as stock. The method of operating any secondary throttle may not be modified. Electronically actuated throttle bodies may not be replaced by mechanical units unless specified on the vehicle’s spec line. Requests for alternate throttle bodies will be considered on a case by case basis. 6. 3. The engine management computer may be altered or replaced. A throttle position sensor and its wiring may be added or replaced. A MAP or MAF sensor and its wiring may be added. Other existing sensors, excluding the stock air metering device, may be substituted for equivalent units. 7. 4. Wires and connectors in the engine wiring harness may be modified or replaced.
Other letters
Request to Allow Ignition Timing Conversions
#40101 from Ricardo Velez · Not recommended · Minutes (2026-05 Fastrack)
It is not allowed for the ignition timing to be converted to a non-distributor conversion as it goes against the IT philosophy of remaining basically stock.
Convertible Variants
#39982 from John McFarland · No action required · Minutes (2026-05 Fastrack)
The specific models do not need to be called out specifically to include convertible models within the spec line. "Convertible model cars are permitted provided they meet 9.3.18 and 9.4 requirements."
Roll Cage Dash Bar
#39201 from Barry Borgschatz Jr · Not recommended · Minutes (2026-01 Fastrack)
ITE is a regional class and isn't under the national IT rules. Any changes would need to be submitted to the Division.
Engine Classifications
#39149 from Barry Borgschatz Jr · Not recommended · Minutes (2026-01 Fastrack)
ITE is a regional class and isn't under the national IT rules. Any changes would need to be submitted to the Division.
Improved Touring E
#39125 from Barry Borgschatz, Jr · No action required · Minutes (2026-01 Fastrack)
ITE is a regional class and isn't under the national IT rules. Any changes would need to be submitted to the Division.
2006-2015 Mazda MX5 Weight for ITS
#38925 from Paul Ronie · Not recommended · Minutes (2025-10 Fastrack)
Thank you for your letter. The weight will remain at 2740 pounds. Please refer to letter #36373 in October 2024 Fastrack.
Glass Windshields vs Polycarbonate
#38599 from Nicole Hecker · No action required · Minutes (2025-08 Fastrack)
Thank you for your letter. Your request is already covered in the GCR 9.1.3.9d. Lexan front windshield permitted with 20# weight adder. Lexan rear window permitted with 20# weight adder. Any number of Lexan side windows permitted with 5# weight adder Windshield clips and rear window straps per the GCR Section 9.3 Windshield Clips/Rear Window Straps, are permitted and recommended.
ITEZ, # 37277
#37308 from Mike W Ogren · Not recommended · Minutes (2025-05 Fastrack)
Thank you for your letter. Please see letter #37277 in current Fastrack.
ITEZ in GCR
#37277 from Mike W Ogren · Not recommended · Minutes (2025-05 Fastrack)
Thank you for your letter. The CRB is not interested in a nationally recognized regional ruleset for ITEZ.
Weight Reduction Request
#37477 from Fred Brett · Not recommended · Minutes (2025-02 Fastrack)
Thank you for your letter. The Club Racing Board does not recommend a weight reduction.
Driver Resume
#35721 from Barry Borgschatz · Taken care of · Minutes (2024-12 Fastrack)
Barry Borgschatz is being added to the IT Advisory Committee.
Weight Requirements for RX-7
#36450 from Nicole Hecker · Not recommended · Minutes (2024-10 Fastrack)
Thank you for your letter. The Club Racing Board does not recommend this change.
200Tread Wear Tires
#36358 from Andrew Gamble · Not recommended · Minutes (2024-10 Fastrack)
Thank you for your letter. The Club Racing Board does not recommend this change. You can run a 200 treadwear tire in IT currently.
Clarification of Convertible Model
#35063 from Jose de Miguel · Recommended to the Board · Minutes (2024-10 Fastrack)
In GCR Section 9.1.3.9.F, change as follows: "Convertible soft-tops and attaching hardware shall be completely removed. Note: Convertible model cars are permitted if they were only available as convertibles (e.g. MG Midget), or if the convertible model is specifically allowed on the vehicle spec lineprov provided they meet 9.3.18 and 9.4. requirements. Convertible models may compete with their respective OEM or aftermarket hardtop that retains the OEM silhouette. Rear glass in such hardtops may be of automotive safety glass or polycarbonate material. All latches shall be replaced with positive fasteners. Manual and electric sunroofs, original or aftermarket, where the panel is not normally removable shall be retained and run in the closed position. Components (motors, cables, rails) may be removed provided the panel is securely retained. Removable sunroof or T-top may be retained if bolted or
Show 5 more lines
welded in, or removed completely. Glass sunroofs must be removed. All sunroofs may be replaced with panel or replacement skin of the same material as the original surrounding roof material. All glass panels in the roof must be removed. Movable or removable metal or composite panels in the roof may be either removed or positively secured in the closed position. Any openings in the roof resulting from the removal of a panel must be covered with panels of stock contour made of the same material as the stock surrounding roof structure."
Requesting ITS spec line adjustment for the MX-5 (NC)
#35982 from Jeff Giordano · Taken care of · Minutes (2024-05 Fastrack)
Thanks for your letter. Please see letter #35968 in current Fastrack.
Resume for ITAC
#35571 from Club Racing Board · Member feedback requested · Minutes (2024-05 Fastrack)
Barry Borgschatz has been added to Improved Touring Advisory Committee. DATE: April 20, 2024
Lexan Windows? Really?
#35120 from Gregg Ginsberg · Taken care of · Minutes (2024-03 Fastrack)
Thank you for your letter. Please see response to letter #35062 in December Fastrack.
Lexan Windshields Etc.
#35062 from Jose De Miguel · Not recommended · Minutes (2023-12 Fastrack)
Thank you for your letter. The ITAC agrees that replacement glass for many of these cars is difficult if not impossible to obtain. Regardless, the Lexan does represent a weight advantage thus the weight adder.
Request to class Spec MX-5 in ITS
#32541 from Josh Smith · Not recommended · Minutes (2022-08 Fastrack)
Thank you for providing the vehicle specifications for Spec MX-5, these details have confirmed for us that the car is not compatible with Improved Touring. We do not allow alternate hubs, suspension parts, headlight covers, or alternate flywheels. In addition, the spec cylinder head is non-compliant. We wish you luck in finding a good fit for the cars to double dip. We might suggest STU as a candidate. Also, most regions do have regional only catch all type classes that we are sure the cars would be welcomed.
Feedback letter #32064 IT/Prod implications
#32277 from Tim Myers · No action required · Minutes (2022-04 Fastrack)
Thank you for your feedback regarding 200TW tires, we will keep this in mind moving forward.
Opposes 200TW
#32166 from Michael Paramore · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
200 TW Tire Change Proposal.
#32159 from Eric Moye · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
200TW tires-How Many Heat Cycles? Shaving?
#32143 from Hayes Lewis · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
200 TW tires-What is 200TW?
#32142 from Hayes Lewis · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
Opposition to 200TW Rule-Many Non Voters
#32141 from Hayes Lewis · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
Proposed 200TW Tire Rule
#32134 from Willie Phee · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
Against 200tw Tires
#32109 from Rick Benazic · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
200TW Tire Proposal
#32108 from Thomas Ciccone · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
Fastrack #31162
#32096 from Charles Tanck · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Yes, if we were to implement this there would be language elsewhere in the GCR that would need to be cleaned up. As it turns out, that is not necessary at this point. Please see letter #31782 in current Fastrack.
Opposition of Tread Wear Rating Rule
#32095 from Chris Dilluvio · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
Support for 200TW in Improved Touring
#32092 from Ron Earp · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
Do Not Change to 200 Treadwear
#32089 from Steffen Clark · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
200TW Change Concerns
#32088 from Justin Deffenbaugh · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
Opposition to 200TW tire in Improved Touring
#32081 from John McFarland · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
Deny 200TW Tire Request for IT
#32073 from Anthony Biondo · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
Opposes 200tw Tire Change
#32071 from Randy Shaw · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
Oppose the 200tw Tire Requirement for IT Classes
#32069 from Matt Downing · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
IT - Proposed 200TW Tires
#32067 from Jeff Giordano · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
200TW Tire Rule
#32066 from Scott Mackela · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
200TW Tire Rule
#32065 from Scott Mackela · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
200 treadwear tire rule
#32062 from Carl Biondo · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
200TW Change
#32061 from Justin Deffenbaugh · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
Opposes Mandate 200TW Tires for Improved Touring
#32056 from Ben Slechta · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
Opposes recommended 200TW minimum
#32053 from Robert Zatz · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. Please see letter #31782 in current Fastrack.
Please classify the 2006 Chevrolet Cobalt SS in Improved Touring
#32014 from Emmitt Staley · Not recommended · Minutes (2022-03 Fastrack)
Thank you for your letter. The Chevrolet Cobalt SS is correctly classified in ITS.
Opposed to 200tw Tires
#31782 from Steve Elicati · No action required · Minutes (2022-03 Fastrack)
Thank you for your letter. And we mean that sincerely! This issue has generated more member feedback than anything in recent memory. Some excellent points have been made both for and against the change, and they have been noted. At the moment there really is no clear answer on which path is best. The Committee has agreed that some of the issues that have been raised require additional research and discussion before we can move forward. That work has already begun. Possibly for that reason, although likely there were other considerations as well, the Competition Board has decided NOT to move forward with the 200TW tire rule for Improved Touring at this time. We certainly believe everyone involved, particularly all of you that felt strongly enough to reach out about this, ultimately have
Show 4 more lines
the best interests of Improved Touring in mind. We are coming up on a very significant IT anniversary, and hopefully we can celebrate it with larger car counts at events across the country. Please don’t hesitate to continue to tell us what’s on your mind. We really are all in this together. Your ideas, support and even thoughtful disagreement will help to keep us pointed in the right direction.
Request to Reconsider Classing Mazda 2 in ITC #2
#31765 from Anthony Biondo · Not recommended · Minutes (2022-02 Fastrack)
Thank you for your letter. The car has been classed according to the Improved Touring Process. The IT Operations Manual that describes the classification of cars can be found on the SCCA.COM website.
Request to Mandate 200TW Tires for Improved Touring
#31162 from Kirk Knestis · Recommended to the Board · Minutes (2022-02 Fastrack)
Effective 07/01/2022 In GCR section 9.1.3.D.8.a.7, change as follows: "Original equipment wheels supplied by the manufacturer for the year(s), make, model andtrim level(s) of the car as listed on the spec line may be used regardless of size unless notedotherwise on the vehicle’s spec line. Note that this allowance does NOT permit the use oftires of a greater section width or aftermarket wheels of the stock size when larger than listedin D.7.1.a.6. Tires may not have a UTQG rating of less than 200."
200tw Tires
#31477 from Frank Schwartz · No action required · Minutes (2021-12 Fastrack)
Thank you for your letter.
Request to Classify 2007 Audi A3 2.0l Turbo
#30351 from Steve Taylor · No action required · Minutes (2021-10 Fastrack)
Thank you for your letter. We have submitted a tech bulletin to include the Audi A3 in ITR at 2950#. Please note that Turbo cars have only recently been allowed into Improved touring. The rules for turbo engines are very strict including stock turbo, stock intercooler and charge piping, and stock ECU calibration. Please review ITCS 9.1.3.3 Turbocharged Engines for complete regulations. Cars built to World Challenge or Continental/Koni Challenge etc. regulations will not be compliant in IT and should be fielded in STU.
Request weight off NC MAZDA
#30744 from Kevin Koelemeyer · Not recommended · Minutes (2021-08 Fastrack)
Thank you for your letter. The NC Miata is competitive as classed at its current weight.
Restrictor Plate on 325is
#30674 from Thomas Christen · No action required · Minutes (2021-08 Fastrack)
Thank you for your letter. Yes, your understanding of the current spec line is correct. If you would like to request a change please submit a letter with supporting documentation to that effect.
Alternate Miata Hubs
#30053 from Michael Kamalian · Not recommended · Minutes (2021-02 Fastrack)
Thank you for your letter. Your request is not within the philosophy of the rules. Aftermarket produced parts are allowed per the rules provided they are direct replacement parts designed with exactly the same dimensions, type of internal parts, etc. as the OEM part they replace.
Request adding 7.5
#29582 from Corry Hunter · Not recommended · Minutes (2021-02 Fastrack)
Thank you for your letter. Under GCR 9.1.3.7, IT wheel and Tire rules. Wheel sizes listed are maximum sizes with their corresponding maximum section width. In ITS a 7.5" wheel is already permitted and would fall under the 8" maximum rim width with a maximum section width of 225. The purpose of the regulation is to limit the advantage of a wider wheel. We do not recommend a change to this regulation at this time.
Request to move the Z32 300ZX to ITS
#29433 from Ben Phillips · Not recommended · Minutes (2021-02 Fastrack)
Thank you for your letter. Your request is not recommended at this time. We are currently reviewing the classification process for ITR.
Request for E30 325i Weight Reduction
#29122 from Skylar McKnight · Not recommended · Minutes (2021-02 Fastrack)
Thank you for your letter. Vehicle weight is correct for the model in this class. We will continue to monitor the performance of this car relative to others in ITS and make a correction in the future if needed.
Request to allow 1.6 Miatas in ITA convert to 94-01 differential
#28983 from Ron Munnerlyn · Not recommended · Minutes (2020-12 Fastrack)
Thank you for your letter. Your request is not within the class philosophy. IT does not allow modification or replacement of major components of the vehicle such as the differential carrier /rear end. Differentials are available that fit the 1.6L NA Miata's (e.g. Kaaz, OS Giken), where many cars classed in IT must resort to modified OEM or very rare and hard to find differentials. This is part of the "warts and all" philosophy that keeps the IT rules simple and limited. Allowing such a modification opens the door to similar such changes across the range of IT classifications and potentially cascading requests for other cross-platform bolt- ons. That is unwanted, the change is inconsistent with the class philosophy, and the justification for the change isn't even a real problem for the car. No one requests a "no performance advantage" item because it has no performance benefit. The CRB does not recommend this
Show 1 more lines
allowance.
Request for vehicle Classification
#28819 from John Budrevic · No action required · Minutes (2020-12 Fastrack)
Thank you for your letter. ITE is a regional class operated under a number of rule sets at regional levels, not a national one controlled by the ITCS. This car is certainly a candidate for catchall rules like ITE, SPO, etc., however does not fit the IT philosophy or performance envelopes. The Author is in Gainesville, FL, putting him in the SEDIV. Rules for their club racing regional classes can be found on the divisional website sedivracing.com. SEDIV offers SPO for turbocharged cars like this one but it would not meet the safety requirements of production or GT that the category requires. The direct link is as follows: https://drive.google.com/file/d/1AltjwB8ZaEbIT5Ctkb5dLScUeFXojudW/view
Request Spec MX-5 cylinder head
#28927 from Josh Smith · Not recommended · Minutes (2020-10 Fastrack)
Thank you for your letter. Head machining as described is not within the class philosophy.
Request to Allow Removal of Mass Air Flow Sensor
#27941 from chi ho · Not recommended · Minutes (2020-03 Fastrack)
Thank you for your letter. The CRB believes the rule is correct at this time but will continue to keep the request in mind for a review of the ITCS.
Opposes 4 piston calipers in IT 25858
#26752 from James Bell · No action required · Minutes (2019-09 Fastrack)
Thank you for your letter. This matter has been resolved.
Remove Verbiage about an Assessment Clock in 9.1.3.C.
#28610 from Improved Touring Committee · Recommended to the Board · Minutes (2019-05 Fastrack)
In Improved Touring, GCR section 9.1.3.C, change as follows: "During the initial vehicle classification process, the Club shall assess vehicle performance factors such as – but not limited to – manufacturer’s published specifications for engine type, displacement, horsepower, and torque; vehicle weight; brake type and size; suspension design; and aerodynamic efficiency. Based only on such clearly measurable physical factors, a minimum allowable weight shall be established. At the end of the second, third, and fourth full years of classification, the vehicle’s racing performance relative to other vehicles in its class shall may be evaluated. If the Club deems that, in the interest of fostering greater equity within a class, a vehicle should be reclassified to another Improved
Show 18 more lines
Touring class, such a reclassification may be made. Alternatively or additionally, if the Club deems that an upward or downward revision in the minimum allowable weight is warranted, such an adjustment may be made. At the end of a vehicle’s fourth full year of Improved Touring classification, the vehicle’s minimum weight shall be established. Cars with weights assigned prior to 1/1/2005 may have their weights reassigned using the same process that is used for new listings. Should this occur, the assessment clock will start anew. Racing history of this particular model may be considered at this time and an adjustment may be included in the new minimum weight, and the adjustment may be reconsidered at the end of any of the first four full years of competition. If at any time an error is discovered in the physical factors used to assess a vehicle’s weight or an error was made during the application of the weight-assignment process, the error may be corrected. Should such an error correction occur, the assessment clock will start anew. Racing history of this particular model may be considered at this time and a performance compensation adjustment may be included in the new minimum weight, and the racing history of this model may be evaluated for an adjustment at the end of any of the first four full years of competition after the correction is made. On rare occasion—and only after careful review of the actual racing performance of a particular make/model/ year of vehicle—the Club may reclassify a vehicle, revise a vehicle’s minimum allowable weight, and/or in the most extreme situation an intake restrictor may be required. Such an action shall be taken solely for the purpose of restoring equity within the vehicle’s class."
Clarification on 9.1.3 D1.A.2
#26610 from PRH stark · No action required · Minutes (2019-05 Fastrack)
Thank you for your letter. Please see response to letter #26237.
Request for SM into ITA RULE CHANGE
#26506 from Bruce Bettinger · Recommended to the Board · Minutes (2019-04 Fastrack)
In ITS, Mazda MX-5 / Miata (99-00), add to notes as follows: “Reinforcement of the differential housing ears is allowed for the purpose of repairing or reducing breakage at the factory stress riser “notch”.” In ITS, Mazda MX-5 / Miata (01-05), add to notes as follows: “Reinforcement of the differential housing ears is allowed for the purpose of repairing or reducing breakage at the factory stress riser “notch”.” In ITA, Mazda MX-5 / Miata (90-93), add to notes as follows: “Reinforcement of the differential housing ears is allowed for the purpose of repairing or
Show 4 more lines
reducing breakage at the factory stress riser “notch”.” In ITA, Mazda MX-5 / Miata (94-97), add to notes as follows: “Reinforcement of the differential housing ears is allowed for the purpose of repairing or reducing breakage at the factory stress riser “notch”.”
Opposes alternative brake calipers
#26364 from steve elicati · No action required · Minutes (2019-04 Fastrack)
Thank you for your letter. The Club Racing Board appreciates your comments.
Opposes RE: #25828 - IT Brake calipers
#26229 from Jon Rogers · No action required · Minutes (2019-04 Fastrack)
Thank you for your letter. The Club Racing Board appreciates your comments.
Opposes Alternate Drake Calipers
#26211 from Raymond Blethen · No action required · Minutes (2019-04 Fastrack)
Thank you for your letter. The Club Racing Board appreciates your comments.
Supports IT Brake and Tire thoughts
#26149 from Jeff Baker · No action required · Minutes (2019-04 Fastrack)
Thank you for your letter. The Club Racing Board appreciates your comments.
Oppose brake change in IT
#26143 from Lee Graser · No action required · Minutes (2019-04 Fastrack)
Thank you for your letter. The Club Racing Board appreciates your comments.
Opposed to Letter #25828
#26127 from Stephen Blethen · No action required · Minutes (2019-04 Fastrack)
Thank you for your letter. The Club Racing Board appreciates your comments.
Opposes Letter #25828
#26118 from Hayes Lewis · No action required · Minutes (2019-04 Fastrack)
Thank you for your letter. The Club Racing Board appreciates your comments.
Opposes Open Brake Calipers
#26117 from James Ray · No action required · Minutes (2019-04 Fastrack)
Thank you for your letter. The Club Racing Board appreciates your comments.
Supports Brake Changes to Improved Touring
#26116 from Tom Donnelly · No action required · Minutes (2019-04 Fastrack)
Thank you for your letter. The Club Racing Board appreciates your comments.
Opposes Alternate Calipers in IT
#26111 from Richard Grunenwald · No action required · Minutes (2019-04 Fastrack)
Thank you for your letter. The Club Racing Board appreciates your comments.
Opposes aftermarket brakes in IT
#26109 from Vaughan Scott · No action required · Minutes (2019-04 Fastrack)
Thank you for your letter. The Club Racing Board appreciates your comments.
Opposes Letter #25828
#26108 from Chris Childs · No action required · Minutes (2019-04 Fastrack)
Thank you for your letter. The Club Racing Board appreciates your comments.
Opposes Open IT brake calipers
#26104 from Matt Downing · No action required · Minutes (2019-04 Fastrack)
Thank you for your letter. The Club Racing Board appreciates your comments.
Regarding Open IT brake Calipers
#26101 from Richard Pannell · No action required · Minutes (2019-04 Fastrack)
Thank you for your letter. The Club Racing Board appreciates your comments.
Opposes Aftermarket Brake Calipers
#26094 from Sean Duncan · No action required · Minutes (2019-04 Fastrack)
Thank you for your letter. The Club Racing Board appreciates your comments.
Opposes 25828 open brakes
#26093 from Joe Harlan · No action required · Minutes (2019-04 Fastrack)
Thank you for your letter. The Club Racing Board appreciates your comments.
Opposes #25828 (Improved Touring Committee)Open IT brake
#26090 from Cameron Conover · No action required · Minutes (2019-04 Fastrack)
calipers Thank you for your letter. The Club Racing Board appreciates your comments.
Opposes Brake Calipers
#26089 from John McFarland · No action required · Minutes (2019-04 Fastrack)
Thank you for your letter. The Club Racing Board appreciates your comments.
Open IT brake calipers
#25828 from Improved Touring Committee · No action required · Minutes (2019-04 Fastrack)
Thank you to those who wrote in responding to this What Do You Think. At this time, membership does not support this idea.
Request to clarify maximum wheel sizes
#26328 from Jose De Miguel · No action required · Minutes (2019-03 Fastrack)
Thank you for your letter. Wheel diameter rules have been removed from the Improved Touring category. All that is limited is wheel width and tire sizes as listed in 9.1.3.D.7 “Wheels/ Tires”.
Open IT brake calipers
#25828 from Improved Touring Committee · Member feedback requested · Minutes (2019-01 Fastrack)
The CRB is seeking your feedback on the following: Allow any brake caliper up to 4 pistons to be used on any car in the ITCS. Brake master cylinder and rotors would remain stock. This is to take advantage of the availability and relatively low cost of pads as well as address stock component shortages without introducing a significant change to the balance of competition. Please provide your feedback through crbscca.com.
Street Tire Rules in Rain Races
#25661 from Raymond Blethen IV · No action required · Minutes (2019-01 Fastrack)