BoP Lab / Buttonwillow Raceway Park

FA + STL at Buttonwillow Raceway Park

No mapCal Club 2024

This track has been raced on 2 configurations (The Circuit, 2.57 mi; 2.92 mi). Laps on different configurations are not comparable, so only events on the 2.57 mile layout are shown; switch above to see the others.

Pos	Car	Driver	Class	#	Lap	Theoretical	Qual	Race	5-lap stint	Consistency	Trap	S1	S2	S3
1	Swift 016	Greg Labadie	FA	35	1:35.792 A-Q1	1:35.351	1:35.792 A-Q1	1:37.275 A-R1	1:37.692 A-R1	+3.958 A-R1	163.8 A-R1	26.713 A-Q2	26.816 A-Q1	41.822 A-Q1
2	Mazda MX-5	Jared Korth	STL	27	1:51.665 B-P	1:51.645		1:58.002 A-R2	1:58.825 A-R2	+1.245 A-R2	134.8 A-R1, A-R2	30.616 B-P	32.218 B-P	48.811 B-P
3	Mazda Miata	Wesley Mollno	STL	11, 111	1:52.983 B-P	1:52.983	1:59.582 A-Q1	1:59.163 A-R1	1:59.870 B-R2	+0.510 B-R2	133.4 A-Q1	30.838 B-P	33.020 B-P	49.197 B-P
4	Mazda Miata	Jon Davies	STL	67	1:53.071 B-P	1:53.071	1:59.281 B-Q1	1:59.121 B-R1	1:59.683 B-R1	+1.145 B-R1	127.3 B-P	30.815 B-P	32.820 B-P	49.536 B-P
5	Mazda RX-8	David LeCren	STL	2	1:53.515 B-P	1:53.253	2:09.464 A-Q2	2:11.372 A-R2	2:11.978 A-R2	+5.025 A-R2	121.0 A-Q2	31.217 B-P	32.486 B-P	49.550 B-P
6	Mazda Miata	Sayo Haraishi	STL	34	1:54.120 B-P	1:54.019	2:08.265 B-Q1	2:09.190 B-R1	2:09.557 B-R1	+0.759 B-R1	105.6 B-P	31.129 B-P	33.359 B-P	49.531 B-P
7	Mazda MX-5	Ricardo Arruda	STL	16	1:54.343 B-P	1:54.343	2:00.717 B-Q2	2:01.410 B-R1	2:02.207 B-R1	+0.929 B-R1	104.3 B-P	31.248 B-P	32.888 B-P	50.207 B-P
8	Mazda MX-5	Gavin Wardle	STL	169	1:54.845 A-R1	sector data unreliable	1:58.292 A-Q2	1:54.845 A-R1	1:59.598 A-R2	+0.868 A-R2	132.7 A-R2	8.264	33.984	51.822
9	Mazda Miata	Nick Leverone	STL	137, 37	1:54.963 B-Q2	1:54.891	1:54.963 B-Q2	1:55.682 B-R1	1:56.512 B-R1	+1.038 B-R1	106.0 B-Q1	31.458 B-Q2	32.979 B-Q2	50.454 B-Q2
10	Honda Civic Si	Jonathan Lugod	STL	61	1:56.438 B-R1	1:56.128	1:57.331 B-Q2	1:56.438 B-R1	1:57.403 B-R1	+1.528 B-R1	106.8 B-P	31.787 B-P	33.468 B-P	50.873 B-P
11	Honda Prelude	Carl Young	STL	23	1:56.961 B-R1	1:56.631	1:57.917 B-Q2	1:56.961 B-R1	1:57.759 B-R1	+1.599 B-R1	104.5 B-Q2	31.994 B-R1	33.745 B-R1	50.892 B-R1
12	Mazda MX-5	Ryan Gutile	STL	116	1:57.404 B-Q1	1:57.004	1:57.404 B-Q1	1:57.483 B-R1	1:58.542 B-R1	+1.371 B-R1	128.4 A-Q2	31.829 B-R1	33.695 B-Q1	51.480 B-R1
13	Mazda Miata	Amy Mills	STL	114	1:57.757 A-Q2	1:57.494	1:57.757 A-Q2	1:58.239 B-R2	1:58.840 B-R2	+1.462 B-R2	122.6 A-R2	32.321 B-Q2	33.780 A-Q2	51.393 A-Q2
14	Mazda MX-5	Bryce Johnson	STL	15, 13	1:58.716 A-Q2	1:58.419	1:58.716 A-Q2	1:59.496 A-R2	1:59.874 A-R2	+0.878 A-R2	136.6 A-Q1	32.248 A-Q1	34.104 A-Q2	52.067 A-Q2
15	Mazda Miata	Patrick Drinkwine	STL	151	1:59.239 B-Q1	1:58.754	1:59.239 B-Q1	2:00.132 B-R1	2:00.548 B-R1	+0.505 B-R1	106.6 B-P	32.503 B-P	34.167 B-P	52.084 B-P
16	Mazda MX-5 (2015)	Adrian Comstock	STL	25	2:00.239 A-Q2	2:00.015	2:00.239 A-Q2	2:00.722 A-R1	2:01.250 A-R2	+0.672 A-R2	133.0 A-R2	32.847 A-R2	34.493 A-Q2	52.675 A-Q2
17	Mazda MX-5	Andy Chittum	STL	99	2:00.296 A-Q2	1:59.684	2:00.296 A-Q2	2:00.787 A-R1	2:01.366 A-R1	+1.093 A-R1	132.9 A-R2	32.848 A-Q1	34.467 A-Q2	52.369 A-Q2
18	Mazda Miata	Richard James	STL	91	2:02.318 B-R1	2:01.786	2:02.441 A-Q1	2:02.318 B-R1	2:03.149 B-R2	+0.867 B-R2	126.7 A-R1	32.990 B-R1	35.132 A-Q1	53.664 B-R1
19	Mazda Miata	Todd Launchbaugh	STL	73	2:02.759 B-R1	2:02.624		2:02.759 B-R1	2:03.974 B-R1	+1.599 B-R1	98.5 B-R1	33.210 B-R1	35.059 B-R1	54.355 B-R1
20	Mazda Miata	Ayden Vaillancour	STL	88	2:03.022 B-R1	2:02.301	2:03.653 B-Q2	2:03.022 B-R1	2:03.841 B-R1	+0.936 B-R1	100.4 B-P	33.072 B-P	35.168 B-P	54.061 B-R1
21	Mazda Miata	Lauren Lewis >115%	STL	45	2:17.307 A-R1	2:16.162		2:17.307 A-R1	2:18.705 A-R1	+1.938 A-R1	108.6 A-R1	36.821 A-R1	39.026 A-R1	1:00.315 A-R2
22	Acura integra	Jack McEachern >115%	STL	21	2:24.310 B-Q2	2:22.511	2:24.310 B-Q2	2:24.550 B-R2	2:32.162 B-R1	+2.229 B-R1	77.6 B-Q1	38.960 B-Q1	41.141 B-Q2	1:02.410 B-R2

One row per driver and car (a driver who changed cars has a row for each). Each cell is that driver's best in that car across the selected events, with the session it was set in. Best 5-lap stint is the mean of the driver's quickest five consecutive race laps, and consistency is how far their median race lap sat behind their best in that race (small is a driver who does it every lap); both come from the race with the best stint. The fastest in each column is purple, and a car whose best lap is more than 115% of the fastest in its class is greyed (marked ">115%" beside the driver) and left out of the colour scale. Click a column to sort, a row to highlight it. Theoretical lap is the sum of the best sectors, whichever laps they came from, and never slower than the best lap (where a car's fastest laps were recorded without sector times, its best lap is used). The 115% mark is about the car's best lap only: a car whose best lap is within 115% of the fastest in its class is never marked. Greyed sectors with no theoretical lap mean the sector times on file do not add up to a believable lap. Letters refer to the events above; Q is qualifying, R a race.

Sectors

S1 SF → IM1 0.65 mi
S2 IM1 → IM2 0.75 mi
S3 IM2 → SF 1.17 mi
Spd In → Out 0.03 mi

Sectors are numbered in lap order from start/finish, whatever each event's timing called them; the loop names are SCCA timing's.

By car

Car	Class	Drivers	Lap	Qual	Race	Trap	S1	S2	S3
Swift 016	FA	1	1:35.792Greg Labadie	1:35.792Greg Labadie	1:37.275Greg Labadie	163.8Greg Labadie	26.713Greg Labadie	26.816Greg Labadie	41.822Greg Labadie
Mazda Miata	STL	17	1:51.665Jared Korth	1:54.963Nick Leverone	1:54.845Gavin Wardle	136.6Bryce Johnson	8.264Gavin Wardle	32.218Jared Korth	48.811Jared Korth
Mazda MX-5	STL	6	1:51.665Jared Korth	1:57.404Ryan Gutile	1:54.845Gavin Wardle	136.6Bryce Johnson	8.264Gavin Wardle	32.218Jared Korth	48.811Jared Korth
Mazda Miata	STL	10	1:52.983Wesley Mollno	1:54.963Nick Leverone	1:55.682Nick Leverone	133.4Wesley Mollno	30.815Jon Davies	32.820Jon Davies	49.197Wesley Mollno
Mazda MX-5 (2015)	STL	1	2:00.239Adrian Comstock	2:00.239Adrian Comstock	2:00.722Adrian Comstock	133.0Adrian Comstock	32.847Adrian Comstock	34.493Adrian Comstock	52.675Adrian Comstock
Mazda RX-8	STL	1	1:53.515David LeCren	2:09.464David LeCren	2:11.372David LeCren	121.0David LeCren	31.217David LeCren	32.486David LeCren	49.550David LeCren
Honda Civic Si	STL	1	1:56.438Jonathan Lugod	1:57.331Jonathan Lugod	1:56.438Jonathan Lugod	106.8Jonathan Lugod	31.787Jonathan Lugod	33.468Jonathan Lugod	50.873Jonathan Lugod
Honda Prelude	STL	1	1:56.961Carl Young	1:57.917Carl Young	1:56.961Carl Young	104.5Carl Young	31.994Carl Young	33.745Carl Young	50.892Carl Young
Acura integra	STL	1	2:24.310Jack McEachern	2:24.310Jack McEachern	2:24.550Jack McEachern	77.6Jack McEachern	38.960Jack McEachern	41.141Jack McEachern	1:02.410Jack McEachern

The best any driver of each car managed across the selected events, with who set it. Spellings and model years of the same car are grouped; click a row marked ▸ to see each version. Grouping is worked out from the names, so tell us if two cars are wrongly merged or split.

Rule changes between these events

Cal Club 2024 → Cal Club 2025 2024-02-23 to 2025-02-22

2024-12-01 STL Request to Remove Miata Hubs from General category

#37138 from Christopher Childs · Rule change · TB 24-12 (2024-12 Fastrack)

neutralSTL/STU: 90-05 Mazda Miata alternate front wheel hubs moved from General to specific part approval.

In GCR, Section 9.1.4.M.18., change as follows:
"18. Allow alternate front wheel front hubs, Mazda Motorsports Development Part #0000-04-5HUB-S1, for the 90-05 Mazda
Miata~~: Mazda Motorsports Development Part #0000-04-5HUB-S1~~."

2025-02-01 FA Classify FR European Championship car as spec line car in Table 2

#37658 from Club Racing Board · Rule change · TB 25-02 (2025-02 Fastrack)

neutralFA adds Tatuus F.3 T-318 or FR-19 as spec line car in Table 2 for Formula Regional European Championship.

In FA Table 2, add the following:
Table 2 (Spec Line Cars)
Car Engine
Wheel
Width (in)
± .060
Aero Transmission Weight Notes

A specification table follows in the original; it is not shown here.

Cal Club 2025 → Cal Club 2026 2025-02-22 to 2026-02-21

2025-03-01 FA Update Formula Renault 2.0 spec line notes

#37853 from Club Racing Board · Rule change · TB 25-03 (2025-03 Fastrack)

neutralFA Formula Renault 2.0 (10-17) spec notes clarified: engine sealed, manual compliance required, tire choice unrestricted, no alterations except repairs.

In FA Table 2, Formula Renault 2.0 (10-17) spec line, change the notes as follows:
"Engine must remain sealed. Car must comply with year-specific Formula Renault 2.0 manual, technical regulations, and all
applicable bulletins ~~found here:~~. Competitors must have copies of these materials in their possession and present them upon
request.
~~https://sites.google.com/a/renault-sport.com/formule-renault-2-0-en/bulletins-techniques/2017,~~
~~https://sites.google.com/a/renault-sport.com/formule-renault-2-0-en/manuel-d-utilisateur/2017.~~
The following exceptions apply: Tire choice is unrestricted. No part of the car may be altered from original Formula Renault 2.0
components, except for necessary repairs that do not affect performance."

2025-05-01 STL E&O: SMX Allowance in STL

#37945 from Greg Amy · Rule change · TB 25-05 (2025-05 Fastrack)

unclearSTL Mazda MX5 Challenge minimum weight now references GCR 9.1.7.1 instead of 2500 lbs; spec components removed, only alternative tires allowed.

In STL Spec Lines, Table B, Mazda Spec MX5 Challenge, change as follows:
Minimum Weight: "~~2500~~ See 9.1.7.1."
Notes: "~~Mazda MX5 Challenge car must utilize the following components: Roush CNC cylinder head 0000-01-5300,Mahle~~
~~standard or +0.005 0000-01-5310, OEM camshaft, 11:1 compression ratio, header 0000-06-5407-NC, exhaust 0000-06-5427-NC,~~
~~cold air intake 0000- 06-5150-KT, ECU flash 0000-01-5379, Pagid front brake pads 0000-03-5104-SP or endurance pads 0000-03-~~
~~5104-EN, Pagid rear brake pads 0000-03-5114-SP or endurance pads 0000-03-5114-EN, Penske front shock 0000-04-5291-SA,~~
~~Penske rear shock 0000-04-5292-SA, Penske rear mount kit 0000-04-5358, Front mount kit 0000-04-5359, Front offset bushing~~
~~0000-04-5407-NC, Eibach front springs 0000-04-9700-08, Eibach rear springs 0000-04-9400-07, Eibach helper springs 0000-04-~~

Show 5 more lines

~~9926, Eibach front sway bar 0000-04-5306-FT, Eibach rear sway bar 0000-04-5306-RR, Interior finish panels 0000-07-5822, C&R~~
~~radiator/oil cooler assembly 0000-01-5504-CR, Oil cooler adapter and lines 0000-01-5511-KT, ACT clutch 0000-02-5004-G6,~~
~~wheels 17x8 #0000-04-5706-GM, # 0000- 04-5706-SL, and Toyo RR 235-40-17 dry, Toyo RA1 235-40-17 wet. Alternative tires on~~
~~17x7 wheels per STL rules. No other Super Touring modifications or allowances permitted except as noted in this spec line.~~ Must
conform completely to GCR 9.1.7.1, except alternative tires (only) per STL regs allowed."

Applies to Mazda Miata on this page: Jared Korth, Ricardo Arruda, Gavin Wardle, Ryan Gutile, Bryce Johnson, Andy Chittum, Adrian Comstock

2025-07-01 FA Ligier JS F3 Tire Choice

#38434 from Rocco Magni · Rule change · TB 25-07 (2025-07 Fastrack)

neutralFA Ligier JS F3 front tires may be Hoosier 43363 240/580R13 MS, rear 43368 300/590R13 MS.

In FA Table 2, FR Americas Ligier JS F3 spec line, change the notes as follows:
"Engine must be sealed in compliance with FR Americas or prior F3 Americas requirements. Car must comply with FR Americas
rules, with the following exception: front tires may be Hoosier P/N 43363, size 240/580R13 in MS compound, and rear tires may
be Hoosier P/N 43368, size 300/590R13 in MS compound. Competitors must have current copies of Formula Regional Americas
Championship Sporting Regulations, Onroak Automotive Ligier JS F3 Information Manual, and HPD engine-related specifications
and instructions in their possession and present them upon request."

2025-08-01 STL Lotus Weight Reduction

#38772 from Club Racing Board · Rule change · TB 25-08 (2025-08 Fastrack)

fasterSTL/STU Lotus weight reduced: Evora GT4 to 2700 lbs, Elise Cup R to 2250 lbs, Elise/Exige SC to 2450-2550 lbs.

In 9.1.2. GT2/ST Spec Lines, Lotus Evora GT4, change Weight as follows:
"~~2750~~ 2700"
In STU Table B: Alternate Vehicle and Engine Allowances, change Weight as follows:
Lotus Elise Cup R: "~~2300~~ 2250"
Lotus Elise SC/ Lotus Exige SC: ~~"2300~~ 2550
~~2500~~ 2450"

2025-11-01 FA Re-Consider USF Pro 2000 Car for Formula Atlantic Class

#38783 from Augie Pabst · Rule change · TB 25-09 (2025-09 Fastrack)

neutralFA class adds USF Pro 2000 car eligibility for Formula Atlantic racing.

Effective 11/1/25 in FA Table 2, add the following:

2026-01-01 FA Alternate Intake Manifold for MZR

#38223 from Ove Olsson · Rule change · TB 26-01 (2026-01 Fastrack)

unclearFA MZR gains alternate Noor P/N 0088-8-00 intake manifold with AT Power runners as option to Elan or Mazda Speed Elite.

In FA, GCR section 9.1.1.2.d, modify as follows:
"9. Intake manifold must be unmodified Elan DP02-60-003 or Mazda Speed equivalent Elite USF2015AT, 1.882” maximum bore
diameter at throttle plates. Elan or Mazda Speed equivalent Elite intake manifold may be replaced with unmodified intake Noor
P/N 0088-8-00 with intake runners AT Power P/N 13624."
"10. Elan DP02-60-003 or Mazda Speed equivalent Elite USF2015AT intake manifold must use an A aluminum spacer ~~must be~~
~~used~~ between the intake manifold and cylinder head castings; minimum spacer length is 2.200”."

2026-01-01 FA Engine Compression Rule Change Request

#39302 from Reilly Harris · Rule change · TB 26-01 (2026-01 Fastrack)

fasterFA Formula 1000 motorcycle-based engine loses maximum compression ratio 14.5:1 limit.

In FA Table 2, Formula 1000 spec line, change the Engine as follows:
"Motorcycle-based 4-cycle up to 1000cc~~, maximum compression ratio 14.5:1;~~. o Otherwise, current FA engine rules apply."

2026-01-01 STL Weight adjustment for STL

#39579 from Super Touring Committee · Rule change · TB 26-01 (2026-01 Fastrack)

slowerSTL minimum weights increase across all classes, 1300 cc gains 195 lbs to 1950, up to 1850 cc at 2500.

In GCR, Section 9.1.4.2.H.1. change Minimum Weight on chart as follows:

A specification table follows in the original; it is not shown here.

2026-01-01 FA Change Formula 1000 allowances

#39608 from Club Racing Board · Rule change · TB 26-01 (2026-01 Fastrack)

fasterFA Formula 1000 allows carbon fiber external panels, forward-facing gaps, raises floor to 125mm, adds eight 75×125mm rub blocks, expands diffuser to 110cm with 75mm radius transitions.

In FA Table 2, Formula 1000 spec line, change the Notes as follows:
"Car must comply with December 2019 GCR Formula 1000 (FB) Preparation Rules, https://www.scca.com/downloads/48184-
gcr-december-2019/download, except as modified by this spec line. The prohibition of using carbon fiber in any external panels
or any panels licked by the airstream in Part 3.C of the December 2019 GCR F1000 (FB) Preparation Rules is removed, with the
exception that the car's floor pan/undertray must comply with the requirements of Part 2.D of the December 2019 GCR F1000
(FB) Preparation Rules. The prohibition of forward-facing gaps or openings in the bodywork in Part 3.I of the December 2019 GCR
F1000 (FB) Preparation Rules is removed. Part 3.D of the December 2019 GCR F1000 (FB) Preparation Rules is modified as
follows: "Between the rear of the front tire and the front of the rear tire, no point on the lower surface of the car (the surface

Show 7 more lines

licked by the air stream) shall be more than 125mm above the plane determined by the reference area designated by the entrant
and on a line perpendicular to that reference plane." Part 3.D of the December 2019 GCR F1000 (FB) Preparation Rules is also
modified as follows: "A maximum of eight (8) rub blocks of maximum dimension 75mm by 125mm are allowed anywhere on the
lower surface of the chassis and may extend below the reference plane." Part 3.E of the December 2019 GCR F1000 (FB)
Preparation Rules is modified as follows: "The radius of transitions between the diffuser sides and adjacent horizontal structures
may be up to 75mm. The width of the diffuser, as measured between its sides and above any radiused transitions, may not
exceed 110cm in any lateral section." The CRB may require the use of Flat Plate Intake Restrictors at any time."

2026-02-01 FA Pro Mazda Classification and Performance Enhancement Proposal

#39411 from Stephen Lamana · Rule change · TB 26-02 (2026-02 Fastrack)

fasterFA Pro Mazda: lower intake manifold now unrestricted, throttle body raised to 80mm, wing height must not exceed 99cm, bodywork width must not exceed 132cm.

In FA Table 2, Pro Formula Mazda spec line, change the notes as follows:
"All current FA rules apply to areas not covered by this spec line. Apex seals unrestricted. Street port or bridge port
allowed. ~~Unmodified OEM l~~ Lower intake manifold ~~required~~ unrestricted, upper intake manifold unrestricted. Balance tube not
permitted. Fuel injection only. Maximum 70 80mm T throttle B body. The maximum height of the wing and/or
endplates ~~shall~~ must not exceed 99cm (38.98 inches). The overall maximum width of the bodywork behind the front
wheels ~~shall~~ must not exceed 132cm (51.97 inches)."

What the rules allowed changed as listed; this does not say what any particular car ran.