BoP Lab / Buttonwillow Raceway Park
This track has been raced on 4 configurations (The Circuit, 2.57 mi; 19, 2.92 mi; 1.83 mi; 3.02 mi). Laps on different configurations are not comparable, so only events on the 2.57 mile layout are shown; switch above to see the others.
| Pos | Car | Driver | Class | # | Lap | Theoretical | Qual | Race | 5-lap stint | Consistency | Trap | S1 | S2 | S3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Stohr WF1 | Tim Day Jr | P2 | 8 | 1:08.991 D-Q2 | 1:08.991 | 1:08.991 D-Q2 | 1:39.758 A-R2 | 1:40.037 A-R2 | +1.010 A-R2 | 155.4 A-R2 | 26.848 A-Q1 | 28.010 A-Q1 | 42.420 A-Q1 |
| 2 | Stohr WF1 (2004) | Kevin Mitz | P2 | 13 | 1:12.573 D-Q2 | 1:12.573 D-Q2 | ||||||||
| 3 | Pro Formula Mazda (2013) | Greg Labadie 2+ cars | FA | 35 | 1:14.588 D-Q2 | 1:14.588 D-Q2 | ||||||||
| 4 | Swift 016 | Greg Labadie 2+ cars >115% | FA | 35 | 1:35.792 A-Q1 | 1:35.351 | 1:35.792 A-Q1 | 1:37.275 A-R1 | 1:37.692 A-R1 | +3.958 A-R1 | 163.8 A-R1 | 26.713 A-Q2 | 26.816 A-Q1 | 41.822 A-Q1 |
One row per driver and car (a driver who changed cars has a row for each). Each cell is that driver's best in that car across the selected events, with the session it was set in. Best 5-lap stint is the mean of the driver's quickest five consecutive race laps, and consistency is how far their median race lap sat behind their best in that race (small is a driver who does it every lap); both come from the race with the best stint. The fastest in each column is purple, and a car whose best lap is more than 115% of the fastest in its class is greyed (marked ">115%" beside the driver) and left out of the colour scale. Click a column to sort, a row to highlight it. Theoretical lap is the sum of the best sectors, whichever laps they came from, and never slower than the best lap (where a car's fastest laps were recorded without sector times, its best lap is used). The 115% mark is about the car's best lap only: a car whose best lap is within 115% of the fastest in its class is never marked. Greyed sectors with no theoretical lap mean the sector times on file do not add up to a believable lap. Letters refer to the events above; Q is qualifying, R a race.
Sectors are numbered in lap order from start/finish, whatever each event's timing called them; the loop names are SCCA timing's.
| Car | Class | Drivers | Lap | Qual | Race | Trap | S1 | S2 | S3 |
|---|---|---|---|---|---|---|---|---|---|
| Stohr WF1 | P2 | 2 | 1:08.991Tim Day Jr | 1:08.991Tim Day Jr | 1:39.758Tim Day Jr | 155.4Tim Day Jr | 26.848Tim Day Jr | 28.010Tim Day Jr | 42.420Tim Day Jr |
| Stohr WF1 | P2 | 1 | 1:08.991Tim Day Jr | 1:08.991Tim Day Jr | 1:39.758Tim Day Jr | 155.4Tim Day Jr | 26.848Tim Day Jr | 28.010Tim Day Jr | 42.420Tim Day Jr |
| Stohr WF1 (2004) | P2 | 1 | 1:12.573Kevin Mitz | 1:12.573Kevin Mitz | |||||
| Pro Formula Mazda | FA | 1 | 1:14.588Greg Labadie | 1:14.588Greg Labadie | |||||
| Swift 016 | FA | 1 | 1:35.792Greg Labadie | 1:35.792Greg Labadie | 1:37.275Greg Labadie | 163.8Greg Labadie | 26.713Greg Labadie | 26.816Greg Labadie | 41.822Greg Labadie |
The best any driver of each car managed across the selected events, with who set it. Spellings and model years of the same car are grouped; click a row marked ▸ to see each version. Grouping is worked out from the names, so tell us if two cars are wrongly merged or split.
#34012 from Club Racing Board · Rule change · TB 23-04 (2023-04 Fastrack)
In P2 Engine Table, Spec Line B.1, change as follows:
#34038 from Club Racing Board · Rule change · TB 23-04 (2023-04 Fastrack)
In P2, GCR section 9.1.8.C.D.2, change as follows:
"Height: No part of the vehicle having special or significant aerodynamic function shall exceed a height of 115cm (45.275 inches)
above the ground with the car in normal racing trim, driver aboard."
In P2, GCR section 9.1.8.C.D.3, change as follows:
"However, no portion shall extend more than 10cm (3.937 inches) beyond a plane tangent to the outer face of the front and rear
wheels with tires."
P2 Engine Table
Spec
Line Engine Series
A specification table follows in the original; it is not shown here.
#34085 from Club Racing Board · Rule change · TB 23-05 (2023-05 Fastrack)
In FA Table 2, Pro Formula Mazda spec line, change as follows:
"The overall maximum width of the bodywork behind the front wheels shall not exceed 132cm (51.17 51.97 inches)."
#34139 from Club Racing Board · Rule change · TB 23-05 (2023-05 Fastrack)
RM 23-06 – MSR - FMzR Formula Atlantic Classification dated 4/21/2023
In FA Table 2, add a spec line as follows:
#34143 from Club Racing Board · Rule change · TB 23-05 (2023-05 Fastrack)
In P2, GCR section 9.1.8.C.D.6, change as follows:
"As viewed from the side, T the outermost surface of side pods body between the front and rear wheel openings and above the
floor must have a minimum height equal to the height of the front axle centerline."
#34144 from Club Racing Board · Rule change · TB 23-05 (2023-05 Fastrack)
In P2, GCR section 9.1.8.C.C, add a section as follows:
"4. Closed cockpit single seat cars are not permitted unless specifically allowed by a spec line in Table 1."
#34190 from Club Racing Board · Rule change · TB 23-06 (2023-06 Fastrack)
In FA, Pro Formula Mazda spec line, change wheel width as follows:
"Pro Mazda series wheels
A specification table follows in the original; it is not shown here.
#35182 from Formula/Sports Racing Committee · Rule change · TB 23-12 (2023-09 Fastrack)
In P2 Table 1, change as follows:
P2 Table 1 (Spec Line Cars)
A specification table follows in the original; it is not shown here.
#35225 from Club Racing Board · Rule change · TB 24-01 (2024-01 Fastrack)
In P2 Table 1, change as follows:
P2 Table 1 (Spec Line Cars)
A specification table follows in the original; it is not shown here.
#35340 from Michael A Reupert · Rule change · TB 24-01 (2024-01 Fastrack)
In P2 Engine Table, Spec Line B.1, add to notes as follows:
"No modifications allowed on engines manufactured after 2008 model year. 2007-2008 Suzuki GSX-R1000 crankcase part
#11300-21860 may be replaced with 2016-2019 Suzuki GSX-S1000 crankcase part #11301-04840."
#35835 from Bart Wolf · Rule change · TB 24-05 (2024-05 Fastrack)
In P2 Engine Table, Spec Line E, change the notes as follows:
"No engine modifications except for dry sump oil system, ECU mapping, and exhaust system the following: oil system, ECU, and
exhaust are unrestricted."
#35900 from Club Racing Board · Rule change · TB 24-05 (2024-05 Fastrack)
In P2 Table 1, FIA Group CN spec line, change the notes as follows:
"FIA Group CN homologated chassis, brake calipers and discs, hub carriers, and suspension components are required. V de
V European Proto Endurance Series Challenge permitted bodywork, rear diffuser, wing, wheels, and assisted
shifting are allowed. Car M must comply with all other P2 requirements. Competitors must have copies of FIA Group CN
Technical Regulations and V de V European Proto Endurance Series Challenge Sporting and Technical Regulations in theirpossession and present them upon request are available here: https://www.scca.com/pages/technical-forms-and-downloads."
#37187 from Marvin Hodges · Rule change · TB 24-12 (2024-12 Fastrack)
In P2 Engine Table, Line E Note 2, add the following:
"8. Minimum weight 1335 lbs."
#37658 from Club Racing Board · Rule change · TB 25-02 (2025-02 Fastrack)
In FA Table 2, add the following:
Table 2 (Spec Line Cars)
Car Engine
Wheel
Width (in)
± .060
Aero Transmission Weight Notes
A specification table follows in the original; it is not shown here.
#37853 from Club Racing Board · Rule change · TB 25-03 (2025-03 Fastrack)
In FA Table 2, Formula Renault 2.0 (10-17) spec line, change the notes as follows:
"Engine must remain sealed. Car must comply with year-specific Formula Renault 2.0 manual, technical regulations, and all
applicable bulletins found here:. Competitors must have copies of these materials in their possession and present them upon
request.https://sites.google.com/a/renault-sport.com/formule-renault-2-0-en/bulletins-techniques/2017,https://sites.google.com/a/renault-sport.com/formule-renault-2-0-en/manuel-d-utilisateur/2017.
The following exceptions apply: Tire choice is unrestricted. No part of the car may be altered from original Formula Renault 2.0
components, except for necessary repairs that do not affect performance."
#38434 from Rocco Magni · Rule change · TB 25-07 (2025-07 Fastrack)
In FA Table 2, FR Americas Ligier JS F3 spec line, change the notes as follows:
"Engine must be sealed in compliance with FR Americas or prior F3 Americas requirements. Car must comply with FR Americas
rules, with the following exception: front tires may be Hoosier P/N 43363, size 240/580R13 in MS compound, and rear tires may
be Hoosier P/N 43368, size 300/590R13 in MS compound. Competitors must have current copies of Formula Regional Americas
Championship Sporting Regulations, Onroak Automotive Ligier JS F3 Information Manual, and HPD engine-related specifications
and instructions in their possession and present them upon request."
#38783 from Augie Pabst · Rule change · TB 25-09 (2025-09 Fastrack)
Effective 11/1/25 in FA Table 2, add the following:
#38223 from Ove Olsson · Rule change · TB 26-01 (2026-01 Fastrack)
In FA, GCR section 9.1.1.2.d, modify as follows:
"9. Intake manifold must be unmodified Elan DP02-60-003 or Mazda Speed equivalent Elite USF2015AT, 1.882” maximum bore
diameter at throttle plates. Elan or Mazda Speed equivalent Elite intake manifold may be replaced with unmodified intake Noor
P/N 0088-8-00 with intake runners AT Power P/N 13624."
"10. Elan DP02-60-003 or Mazda Speed equivalent Elite USF2015AT intake manifold must use an A aluminum spacer must beused between the intake manifold and cylinder head castings; minimum spacer length is 2.200”."
#39302 from Reilly Harris · Rule change · TB 26-01 (2026-01 Fastrack)
In FA Table 2, Formula 1000 spec line, change the Engine as follows:
"Motorcycle-based 4-cycle up to 1000cc, maximum compression ratio 14.5:1;. o Otherwise, current FA engine rules apply."
#39608 from Club Racing Board · Rule change · TB 26-01 (2026-01 Fastrack)
In FA Table 2, Formula 1000 spec line, change the Notes as follows:
"Car must comply with December 2019 GCR Formula 1000 (FB) Preparation Rules, https://www.scca.com/downloads/48184-
gcr-december-2019/download, except as modified by this spec line. The prohibition of using carbon fiber in any external panels
or any panels licked by the airstream in Part 3.C of the December 2019 GCR F1000 (FB) Preparation Rules is removed, with the
exception that the car's floor pan/undertray must comply with the requirements of Part 2.D of the December 2019 GCR F1000
(FB) Preparation Rules. The prohibition of forward-facing gaps or openings in the bodywork in Part 3.I of the December 2019 GCR
F1000 (FB) Preparation Rules is removed. Part 3.D of the December 2019 GCR F1000 (FB) Preparation Rules is modified as
follows: "Between the rear of the front tire and the front of the rear tire, no point on the lower surface of the car (the surface
licked by the air stream) shall be more than 125mm above the plane determined by the reference area designated by the entrant
and on a line perpendicular to that reference plane." Part 3.D of the December 2019 GCR F1000 (FB) Preparation Rules is also
modified as follows: "A maximum of eight (8) rub blocks of maximum dimension 75mm by 125mm are allowed anywhere on the
lower surface of the chassis and may extend below the reference plane." Part 3.E of the December 2019 GCR F1000 (FB)
Preparation Rules is modified as follows: "The radius of transitions between the diffuser sides and adjacent horizontal structures
may be up to 75mm. The width of the diffuser, as measured between its sides and above any radiused transitions, may not
exceed 110cm in any lateral section." The CRB may require the use of Flat Plate Intake Restrictors at any time."
#39411 from Stephen Lamana · Rule change · TB 26-02 (2026-02 Fastrack)
In FA Table 2, Pro Formula Mazda spec line, change the notes as follows:
"All current FA rules apply to areas not covered by this spec line. Apex seals unrestricted. Street port or bridge port
allowed. Unmodified OEM l Lower intake manifold required unrestricted, upper intake manifold unrestricted. Balance tube not
permitted. Fuel injection only. Maximum 70 80mm T throttle B body. The maximum height of the wing and/or
endplates shall must not exceed 99cm (38.98 inches). The overall maximum width of the bodywork behind the front
wheels shall must not exceed 132cm (51.97 inches)."
What the rules allowed changed as listed; this does not say what any particular car ran.