BoP Labbeta

BoP Lab / Portland International Raceway

T1 at Portland International Raceway

No mapOregon 2025

Track map: sectors and speed trap

Track map with timing sectors and speed trap
Shown for: Oregon 2026 (qualifying, race)
Class · click a class to switch, + to compare alongside
Track configuration
Events

This track has been raced on 2 configurations (19 Scoring Sidebar, 1.88 mi; 19 Scoring Sidebar, 1.97 mi). Laps on different configurations are not comparable, so only events on the 1.88 mile layout are shown; switch above to see the others.

PosCarDriverClass#LapTheoreticalQualRace5-lap stintConsistencyTrapS1S2S3
1Pontiac GTOEd GlessT1431:23.328 A-Q11:22.9471:23.328 A-Q11:25.208 A-R11:26.318 A-R1+1.815 A-R1137.6 A-Q131.215 A-Q128.213 A-Q123.519 A-Q1
2Ford MustangPratt ColeT1971:27.906 A-R21:27.3411:27.906 A-R21:28.545 A-R2+0.604 A-R2127.8 A-R232.567 A-R230.117 A-R224.657 A-R2
3Mazda RX-8Lance StewartT1111:31.914 A-R21:31.7211:31.914 A-R21:32.419 A-R2+0.975 A-R2113.7 A-R233.950 A-R231.617 A-R226.154 A-R2

One row per driver and car (a driver who changed cars has a row for each). Each cell is that driver's best in that car across the selected events, with the session it was set in. Best 5-lap stint is the mean of the driver's quickest five consecutive race laps, and consistency is how far their median race lap sat behind their best in that race (small is a driver who does it every lap); both come from the race with the best stint. The fastest in each column is purple, and a car whose best lap is more than 115% of the fastest in its class is greyed (marked ">115%" beside the driver) and left out of the colour scale. Click a column to sort, a row to highlight it. Theoretical lap is the sum of the best sectors, whichever laps they came from, and never slower than the best lap (where a car's fastest laps were recorded without sector times, its best lap is used). The 115% mark is about the car's best lap only: a car whose best lap is within 115% of the fastest in its class is never marked. Greyed sectors with no theoretical lap mean the sector times on file do not add up to a believable lap. Letters refer to the events above; Q is qualifying, R a race.

Sectors

Sectors are numbered in lap order from start/finish, whatever each event's timing called them; the loop names are SCCA timing's.

By car

CarClassDriversLapQualRaceTrapS1S2S3
Pontiac GTOT111:23.328Ed Gless1:23.328Ed Gless1:25.208Ed Gless137.6Ed Gless31.215Ed Gless28.213Ed Gless23.519Ed Gless
Ford MustangT111:27.906Pratt Cole1:27.906Pratt Cole127.8Pratt Cole32.567Pratt Cole30.117Pratt Cole24.657Pratt Cole
Mazda RX-8T111:31.914Lance Stewart1:31.914Lance Stewart113.7Lance Stewart33.950Lance Stewart31.617Lance Stewart26.154Lance Stewart

The best any driver of each car managed across the selected events, with who set it. Spellings and model years of the same car are grouped; click a row marked ▸ to see each version. Grouping is worked out from the names, so tell us if two cars are wrongly merged or split.

Rule changes between these events

Oregon 2025 → Oregon 2026 2025-05-10 to 2026-05-09

T1 Keep S2000 Classification

#39344 from David Mead · Rule change · TB 25-12 (2025-12 Fastrack)

unclearUnable to summarize: letter states intent but provides no actual rule changes to S2000 specification.

In T1 Spec Lines, Honda S2000, change as follows:

T1 Correcting and updating T1 GT4 spec lines

#39394 from Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

In T1-GT4 Spec Lines, change as follows:

A specification table follows in the original; it is not shown here.

T1 BOP adjustments to non GT4 T1 cars

#39406 from Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

fasterT1 non-GT4 cars: multiple restrictors enlarged (70mm to 73mm, 75mm to 78mm, 55mm to 60mm, 61mm to 70mm); one weight increased to 3600.

In T1 Spec Lines, change as follows:
Spec Line # 1134
Required Restrictor: "61mm 70mm - Flat Plate"
Spec Line # 1140
Required Restrictor: "72mm - Flat Plate"
Spec Line # "1175"
Maximum Displ.: "L76 5967cc OEM"
Minimum Weight: "3250"

Show 38 more lines

Required Restrictor: "80mm"
Engine Notes: "An L76 is an LS2 block with LS3 intake manifold and heads. All parts must be OEM. May resleeve to stock
parameters for engine repair."
Spec Line # 1180
Required Restrictor: "75mm 78mm - Flat Plate"
Spec Line # 1190
Required Restrictor: "70mm 73mm - Flat Plate"
Spec Line # 1200
Required Restrictor: "72mm 78mm - Flat Plate"
Spec Line # 1201
Required Restrictor: "70mm 73mm - Flat Plate"
Spec Line # 1210
Required Restrictor: "72mm - Flat Plate"
Spec Line # 1350
Required Restrictor: "(2) 55mm 60mm flat plate"
Spec Line # 1370
Required Restrictor: "(2) 55mm 60mm flat plate"
Spec Line # 1390
Required Restrictor: "(2) 55mm 60mm flat plate"
Spec Line # 1420 "*Spec line Expires 12/23"
Required Restrictor: "52mm FPR"
Spec Line # 1429
Required Restrictor: "75mm - FPR"
Spec Line # 1460
Weight: "3500 3600"
Required Restrictor: "70mm - FPR"
Spec Line # 1480
Required Restrictor: "80mm FPR"
Spec Line # 1490
Required Restrictor: "75mm - FPR"
Spec Line # 1590
Engine Notes: "90mm Throttle Body Permitted"
Spec Line # 1595
Required Restrictor: "72mm – FPR"
Spec Line # 1596
Required Restrictor: "61mm 70mm – FPR"
Spec Line # 4120
Required Restrictor: "75mm flat plate"

T1 Remove T1 Spec Line

#39407 from Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

neutralT1 BMW M3 E92 (08-13) Spec Line 1090 removed entirely.

In T1 Spec Lines, BMW M3 E92 (08-13) Spec Line number 1090, delete Spec Line in its entirety.

T1 additional T1 adjustment

#39520 from Touring Committee · Rule change · TB 26-01 (2026-01 Fastrack)

unclearT1 Spec Line restrictor changes from 70mm flat plate to unspecified new specification.

In T1 Spec Line, Spec line # 1132, change Restrictor as follows:
"70mm - Flat Plate"

T1 LS1 into Corvette C6 Spec Line Request

#39716 from Danny Kellermeyerhttps://crbscca.com/secu · Rule change · TB 26-02 (2026-02 Fastrack)

neutralT1 Corvette C6 LS1/LS6 Spec Line reinstated: 3200 lbs minimum weight, 70mm restrictor required.

In T1 Spec Lines, reinstate Spec Line # 1139, Chevrolet Corvette C6 (05-13) Includes Z51, GrandSport, Z06, Z06 Carbon, as
follows:
Max Displ: "LS1, LS6 OEM"
Min Weight: "3200"
Required Restrictor: "70mm"

T1 Replace OEM Heat Exchanger (Intercooler) With Aftermarket

#39542 from Roy Lipner · Rule change · TB 26-03 (2026-03 Fastrack)

neutralT1 GT4 Spec Line 4030- now allows Wagner Tuning #200001124 aftermarket intercooler.

In T1 GT4 Spec Lines, Spec Line 4030-, add to Chassis Notes the following:
"Wagner Tuning # 200001124 Intercooler allowed."

T1 Spec line #1139 Restrictor Change Request

#39922 from Danny Kellermeyer · Rule change · TB 26-04 (2026-04 Fastrack)

unclearT1 restrictor changes from 70mm to unspecified dimension; change request text incomplete.

In T1 Spec Lines, Spec line 1139, change Required Restrictor as follows:
"70mm"

T1 Clarification on Request #39716 T1 (Spec Line #1139)

#39924 from Danny Kellermeyer · Rule change · TB 26-05 (2026-05 Fastrack)

fasterT1 LS1, LS6 removes OEM designation; 70mm restrictor requirement deleted.

In T1 Spec Lines # 1139, change as follows:
Max Displ: "LS1, LS6 OEM
Restrictor Required: "70mm"

T1 Mistake in Line 1430

#39958 from Joe Aquilante · Rule change · TB 26-05 (2026-05 Fastrack)

neutralT1 Spec Line Coyote Boss 302 maximum displacement year range corrected to 11-14 from 11-17.

In T1 Spec Line, Spec Lines # 1430, change Maximum Displ as follows:
"Coyote, Boss 302 (11-17 14) 4957"

What the rules allowed changed as listed; this does not say what any particular car ran.