Request for S2000 Help
#25890 from Oscar Jackson · Recommended to the Board · Minutes (2019-01 Fastrack)
Effective 1/1/19, in T3, Honda S2000 (all) (00-09), make changes to wheel size and Notes as
follows:17 x 8.5 17 x 9.0
“Factory bolt-in roll bar may be removed to facilitate the installation of the required roll
cage. Comptech differential housing part #550-040 allowed. Springs and sway barsfrom 2008 S2000 CR allowed. CR front fascia, rear deck lid, and wing are permitted. Spring
rate 600 750 lbs/in F/R maximum allowed. Updating and backdating of flywheels between
engine types is prohibited. 2.2L engine 54mm 60mm flat plate restrictor required. Any
Show 1 more lines
swaybar up to 33mm front, up to 30mm rear allowed.”