Add data plate requirement
#26707 from Formula/Sports Racing Committee · Rule change · TB 19-05 (2019-05 Fastrack)
In GCR section 9.1.1.A.1, add a new section as follows:
“i. All FA cars competing in Majors Races and the Runoffs must have the AIM part
#X47KPFSOLO2R0 data box mount installed on their vehicle to provide the necessary
mounting of the AIM Solo or Solo 2 data box. The mounting surface is to be approximately
oriented either horizontally or vertically either parallel or perpendicular to the longitudinal axis
of the car and must be accessible from the exterior of the car with the driver on board -- it
should have a view of the sky, and not be located under carbon fiber or metallic bodywork.
Sufficient space should be left between the mounting plate and the surface to which it is
Show 4 more lines
attached to permit the use of zip ties/tie straps to restrain the data box to the mounting plate.
The purpose of this requirement is to allow the random placement of data boxes on cars in the
pre-grid by SCCA assigned personal and the collection of the box when the car exits the race
track. Contact AIM and their distributors for direct purchase.”