Request to add data box mounting plate requirement to all FX cars
#28117 from Glen Thielke · Rule change · TB 20-02 (2020-02 Fastrack)
In GCR section 9.1.1.J, add a new section as follows:
"K. All cars competing in Majors Races and the Runoffs must have the AIM part #X47KPFSOLO2R0 data
box mount installed on the vehicle to provide the necessary mounting of the AIM Solo or Solo 2 data box.
The mounting surface is to be approximately oriented either horizontally or vertically either parallel or
perpendicular to the longitudinal axis of the car and must be accessible
from the exterior of the car with the driver on board -- it should have a view of the sky, and not be
located under carbon fiber or metallic bodywork. Sufficient space should be left between the mounting
plate and the surface to which it is attached to permit the use of zip ties/tie straps to restrain the data
Show 3 more lines
box to the mounting plate. The purpose of this requirement is to allow the random placement of data
boxes on cars in the pre-grid by SCCA assigned personal and the collection of the box when the car exits
the racetrack. Contact AIM and their distributors for direct purchase."