Bump Stops Optional in B-Spec
#32415 from Jonathan Wickert · Recommended to the Board · Minutes (2022-07 Fastrack)
In B-Spec Category Specifications, GCR Section 9.1.10.E.36., change as follows:
"Suspension: competitors may use the OEM suspension, any part of the manufacturer upgraded suspension kit the specific
suspension kit approved on the spec line or any B14 Bilstein shock or strut with no modifications except as required for
mounting or to achieve allowed camber. Any camber plate may be used, but may not alter caster. Caster shall be within factory
specification. Any part required to adapt the B14’s to the car must be submitted for approval by the CRB and added to the
individual spec line. Any spring, including 'helper' or 'tender' springs, up to a maximum spring rate of 500 pounds may be used.
Spring are allowed to be strapped or zip tied to the body. The purpose of the strap should be to keep the spring in place when
the axle goes into rebound. The strap can serve no other function. Bump stops may be deleted but cannot be modified or
Show 2 more lines
substituted and shall serve no other purpose. Adjustable sway bar end links may be used on all cars. Front s Sway bars may be
disconnected and removed."