Tail lights on all GT category race cars.
#32799 from John Mills · Rule change · TB 22-09 (2022-09 Fastrack)
In GT, GCR Section 9.1.2.F.7.a.6:
"Glass and/or plastic headlights, front parking lights, front signal lights, lenses, and bulbs shall be removed. Headlight openings
shall be covered with a wire mesh screen or panel having the same contour as the original lens, mounted so that the headlight
bezel/rim remains in place, maintaining the standard appearance of the Production automobile. Side marker light assemblies
shall be removed and the resulting openings covered with a plate whose dimensions do not exceed those of the original parts;
side marker lights that are an integral part of the taillight assembly cannot be removed. Other lighting parts and operating
mechanisms may be removed. In the case of pop-up headlights, the entire assembly may be removed and the opening covered
with a screen or plate (as above, without the headlight bezel/rim requirement) which provides a stock appearance. It is not
Show 8 more lines
permitted to relocate the standard headlight, parking light, signal light, etc., openings. Traditional GT cars only. Not allowed with
any "Spec Car, GT2-ST, or any other added non Traditional GT car. Taillights shall be in the original location and shall may be the
original style/type of taillight for the make, model, and year of car. A rear body panel having the same contour as the original
lens area and in the original location, may be fitted with a tail-light graphic of the original style/type frame/lens adhered to it. If
side marker lights are an integral part of the tail-light assembly they must be represented by the panel graphic. These
panel/graphics shall have a functioning red LED lamp assembly fitted through them on both sides of the car to serve as brake
lights. A 15-watt or equivalent rain light may be included with-in this LED assembly or may be a separately mounted single or
dual LED assembly."