Add Fast Forward Part Numbers for Honda Fit Engine
#33752 from Formula/Sports Racing Committee · Rule change · TB 23-03 (2023-03 Fastrack)
In FC/FF, GCR section 9.1.1.B.14.a.6, change as follows:
"For all Honda part numbers in these specifications, superc seding part numbers are considered equivalent.
In FC/FF, GCR section 9.1.1.B.14.f.5, change as follows:
"Cylinder head breather restrictor must be used as supplied by HPD or Fast Forward, unmodified.: HPD PN: 15262-F21S-A200; Fast
Forward PN: FF200-503."
In FC/FF, GCR section 9.1.1.B.14.k.2, change as follows:
"The upper manifold, air box and throttle body assembly must be used as delivered from Honda, HPD, or Fast Forward as noted
below."
Show 35 more lines
In FC/FF, GCR section 9.1.1.B.14.k.2, insert as follows:
"a. Intake manifold: HPD PN: 17210-F21S-A210; Fast Forward PN: FF200-201.
b. Throttle body: Honda Fit: PN: 16400ZZ5024; HPD PN: 16400ZZ5024; Fast Forward PN: FF200-104.
c. Throttle lever: HPD PN: 17330-F21S-A210; Fast Forward PN: FF200-101."
In FC/FF, GCR section 9.1.1.B.14.k.3, change as follows:
"All gaskets and sensors utilized on the inlet manifold from head to throttle body must be Honda Fit OEM, or HPD supplied or Fast
Forward as noted below.
a. Gasket In. manifold: HPD PN: 17105-RB0-004, Honda Fit OEM.
b. Gasket, EGR chamber cover: HPD PN: 17146-RB0-004, Honda Fit OEM.
c. Gasket In. port: HPD PN: 17115-RB0-007, Honda Fit OEM.
d. Gasket, restrictor: HPD PN: 17399-F21S-A200, (2 required) HPD; Fast Forward PN: FF200-109. Two required."
In FC/FF, GCR section 9.1.1.B.14.k.5, change as follows:
"The Honda Fit engine is required to have an HPD supplied air inlet restrictor supplied by HPD or Fast Forward: HPD PN: 17344-
F21S-A201; Fast Forward PN: FF200-110, with internal diameter of 30.5mm and thickness of 3.175mm (0.125 inches) correctly
installed within the intake system."
In FC/FF, GCR section 9.1.1.B.14.m.1, change as follows:
"The exhaust manifold must be as supplied by HPD or Fast Forward:, HPD part # PN: 18150-F21S-A200 or # PN: 1818 50-F21S-B200;
Fast Forward PN: FF500-001 or PN: FF500-002."
In FC/FF, GCR section 9.1.1.B.14.n.1, change as follows:
"The oil pan, baffle plate, and scavenge pump filter fittings must be as supplied by HP or Fast Forward as noted below. No
modifications are permitted.
a. Oil pan: HPD PN: 11200-F21S-A210 or PN: 11200-F21S-C240; Fast Forward PN: FF100-201A or PN: FF100-201B.
b. Oil pan baffle plate: HPD PN: 11221-F21S-A210; Fast Forward PN: FF100-202.
c. Oil scavenge pump filter fittings (2 required): HPD PN: 15180-F21S-A210; Fast Forward PN: FF100-204."
In FC/FF, GCR section 9.1.1.B.14.n.3, change as follows:
"The scavenge pump and internal scavenge pump parts must be as supplied from HPD or Fast Forward as noted below."
In FC/FF, GCR section 9.1.1.B.14.n.3, change as follows:
"b. Rotor outside diameter: HPD 44.400mm (1.748 inches):; Fast Forward 40.640mm (1.600 inches).
c. Scavenge pump rotor set: HPD PN: 15450-F21S-A20; Fast Forward PN: FF100-110.
d. Oil pump: HPD PN: 15100-F21S-A200; Fast Forward PN: FF100-100A.
e. Scavenge pump cartridge: 15111-F21S-A21; Fast Forward PN: FF100-127.
f. Scavenge pump port A: HPD PN: 15137-F21S-A20; Fast Forward PN: FF100-101.
g. Scavenge pump port B: HPD PN: 15139-F21S-A20; Fast Forward PN: FF100-102.
h. Scavenge pump shaft: HPD PN: 15510-F21S-A20; Fast Forward PN: FF100-103.
i. Scavenge pump front cover: HPD PN: 15070-F21S-A21; Fast Forward PN: FF100-104."