Data Collection Devices
#38946 from Club Racing Board · Recommended to the Board · Minutes (2025-09 Fastrack)
In GCR, Section 9.3.16. add the following:
"C. When standard data collection practices have not been able to produce viable data, the following will apply and a note will be
added to the specific car’s spec line.
1. AiM part #X47KPF-SOLO2R0 data box mount must be installed on the exterior of the car outside the driver compartment to
provide the necessary mounting of the AiM Solo 2 data box. The mounting surface must be approximately oriented either
horizontally or vertically and either parallel or perpendicular to the longitudinal axis of the car and must be accessible from the
exterior of the car with the driver on board. The data box must have a view of the sky and must not be located under carbon fiber
or metallic bodywork. Sufficient space must be left between the mounting plate and the surface to which it is attached to permit
Show 3 more lines
the use of zip ties/tie straps to restrain the data box to the mounting plate. The purpose of this requirement is to allow the
random placement of data boxes on cars on the pre-grid by SCCA-assigned personnel and the collection of the data boxes when
cars exit the racetrack. Contact AiM and its distributors for direct purchase of the data box."