BoP Labbeta

BoP Lab / Rules / Letter #40479

#40479 E&O - Fastrack changes

From Road Racing Competition Committee · Rule change

E&O - Fastrack changes

#40479 from Road Racing Competition Committee · Rule change · TB 26-07 (2026-07 Fastrack)

In Identification Markings, GCR section 9.3.29.A, change as follows:
"Numbers shall be placed on the front and both sides of the car. All closed-wheel cars must have the front number located on
the hood. All formula cars with a rear wing must have legible numbers on each rear wing end plate. Numbers may be one, two,
or three digits. Three-digit numbers must begin with the number "1". Class identifications must be placed on both sides of the
car. Numbers and class identifications on the rear of the car are recommended. Cars running in multiple classes must clearly
identify which class and weight they are running. The number "1" will be exclusively reserved for the current national champion
in each class for Conference Majors/Super Tour events. The number "1" will be reserved until the end of the period for
submitting advanced or pre-event entries, and then will be released. If two or more national champions are entered in the same

Show 8 more lines

run group, the first to enter will have preference. Duplicate car numbers within the same run group are prohibited. See also GCR
section 6.4.1.A."
In Identification Markings, GCR section 9.3.29.B, change as follows:
"The minimum height of all numbers is 8 inches high, with a minimum 1.5-inch stroke width on a single-color contrasting
background. All numbers must be the same color and style. Metallic (reflective) identification characters and backgrounds are
prohibited. The minimum height of all class identifications is 4 inches minimum with a minimum 1/2-inch stroke width on a
single-color contrasting background. The Chief of Timing and Scoring and the Race Director/Chief Steward will determine
legibility of markings.”