T2 + P2 + T4 at Buttonwillow Raceway Park

2023-03-01 T2 Honda Civic Type R Tire Size Increase

#33672 from Marty Grand · Rule change · TB 23-03 (2023-03 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Honda Civic Type-R (2017-), change Tire Size as follows:
"275 295"

2023-03-01 T4 BMW 320I intercooler

#33762 from Chi Ho · Rule change · TB 23-03 (2023-03 Fastrack)

Summary

As printed in Fastrack

In T3 Spec Lines, BMW- 320I, add to Notes the following:
"Aftermarket intercooler permitted."

2023-04-01 T4 Request to Classify 2004-2008 Acura TSX in T4

#33590 from William Phee · Rule change · TB 23-04 (2023-04 Fastrack)

Summary

As printed in Fastrack

In T4 Spec lines, classify Acura TSX (2004-2008) as follows:

A specification table follows in the original; it is not shown here.

2023-04-01 T2 Allowance of any nonmetallic bushing material in T2

#33833 from Tyler Quance · Rule change · TB 23-04 (2023-04 Fastrack)

Summary

As printed in Fastrack

In Touring (T2-T5) Category Specifications, GCR Section 9.1.9.2.D.5.c.1., change as follows:
"All T2-T3 cars are allowed to replace OEM upper and lower control arm bushings with polyurethane, or delrin, or alternate
synthetic materialbushings."

2023-04-01 T2 Allow Adjustable stabilizer bar links

#33861 from John Heinricy · Rule change · TB 23-04 (2023-04 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Cadillac CT4-V Blackwing (2022-), add to Notes as follows:
"Adjustable sway bar end links permitted."

2023-04-01 P2 Remove redundant effective date language and update engine table

#34012 from Club Racing Board · Rule change · TB 23-04 (2023-04 Fastrack)

Summary

As printed in Fastrack

In P2 Engine Table, Spec Line B.1, change as follows:

2023-04-01 T4 T4 Mustang Brakes/Swaybar

#34036 from Scotty B White · Rule change · TB 23-04 (2023-04 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Ford Mustang (2005-2010), change Notes as follows:
"Any sway bar up to F: 35mm and R: 22mm 28mm permitted."

2023-04-01 P2 E&O - Correct dimensional equivalents

#34038 from Club Racing Board · Rule change · TB 23-04 (2023-04 Fastrack)

Summary

As printed in Fastrack

In P2, GCR section 9.1.8.C.D.2, change as follows:
"Height: No part of the vehicle having special or significant aerodynamic function shall exceed a height of 115cm (45.275 inches)
above the ground with the car in normal racing trim, driver aboard."
In P2, GCR section 9.1.8.C.D.3, change as follows:
"However, no portion shall extend more than 10cm (3.937 inches) beyond a plane tangent to the outer face of the front and rear
wheels with tires."
P2 Engine Table
Spec

A specification table follows in the original; it is not shown here.

2023-05-01 T2 C5 Z06 Straight Line Speed

#33575 from Charlie Abell · Rule change · TB 23-05 (2023-05 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Chevrolet Corvette C-5 Incl. Fxd Cpe (98-04) Z06 (hardtop) (01-04), change Weight (lbs) as follows:
"3425 w/53mm 56mm flat plate restrictor)
3350 (w/58mm flat plate restrictor, only permitted when using OEM Wheels and Stock Brakes)"

Applies to Chevrolet Corvette on this page: Josh Carroll, David Holmes, Patrick Howe, Evan Gold, Greg Nester, Michael Cheney, Luis Martinez

2023-05-01 P2 Clarify minimum side body height requirement

#34143 from Club Racing Board · Rule change · TB 23-05 (2023-05 Fastrack)

Summary

As printed in Fastrack

In P2, GCR section 9.1.8.C.D.6, change as follows:
"As viewed from the side, T the outermost surface of side pods body between the front and rear wheel openings and above the
floor must have a minimum height equal to the height of the front axle centerline."

2023-05-01 P2 Clarify closed cockpit single seat car allowance

#34144 from Club Racing Board · Rule change · TB 23-05 (2023-05 Fastrack)

Summary

As printed in Fastrack

In P2, GCR section 9.1.8.C.C, add a section as follows:
"4. Closed cockpit single seat cars are not permitted unless specifically allowed by a spec line in Table 1."

2023-06-01 T4 05-06 Mini Wheel Weight

#34112 from Mav Singh · Rule change · TB 23-06 (2023-05 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mini Cooper S (02-04), change as follows:
Wheel Size: "16 x 7 17 x 8"
Add to Notes: "Wheels conforming to B-spec rules are permitted."
In T4 Spec Lines, Mini Cooper S (05-06), change as follows:
Wheel Size: "16 x 7 17 x 8"
Add to Notes: "Wheels conforming to B-spec rules are permitted."
In T4 Spec Lines, Mini Cooper S (07-13), change as follows:
Wheel Size: "17 x 7 8"

2023-06-01 T2 2009 Porsche Cayman Classing Request

#34147 from Lisa Hunsicker · Rule change · TB 23-06 (2023-06 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Porsche Cayman S (06-08), change year as follows:
"Porsche Cayman S (06-08) (06-09)"

2023-06-01 T4 06-09 VW Rabbit

#34153 from Cameron Conover · Rule change · TB 23-06 (2023-05 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, delete Volkswagen Rabbit 2.5 (06-07) in its entirety and change Volkswagen Rabbit 2.5 (08-09) as follows:
"Volkswagen Rabbit 2.5 (08 06-09)"
Add to Notes: "Integrated Engineering intake IEIMVB1-BK allowed with 25lb penalty."

2023-06-01 T4 96-01 Audi a4 2.8 Spring Rate

#34217 from Michael Gordhamer · Rule change · TB 23-06 (2023-05 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Audi A4 V-6 (96-01) / Volkswagen Passat 2.8 V6 (96-05), change as follows:
Wheel Size: "16 x 7 17 x 8"
Tire Size: "225 245"
Notes: "The following items must remain stock: shock/struts (including mounts), original wheels, and transmission differential -
unless specified below. 800lb springs allowed. Front and rear sway bars permitted 32mm max."

2023-07-01 T2 370Z Obsolete Parts & NISMO Alternatives to SPL Parts

#34297 from Zach Hayward · Rule change · TB 23-06 (2023-05 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Nissan 370Z (09-17) / 370Z NISMO Edition (09-17), change Notes as follows:
5300S-SS370 T-2 spring kit allowed; 54600-SS370 T-2 front and rear sway bar kit allowed. Sway Bars allowed 35mm (f). 29mm
(r). Sports Package is allowed. Springs up to 1000 lbs/in front and rear allowed. 54010- SZ350 (F) and 55020-SZ350 (R) allowed.
Cold Air Intake allowed. Performance Alternative Header permitted - Part #14002-SS370. Rear spring relocation permitted to
allow coil over shocks. SPL suspension kit permitted that includes: rear camber arms #SPL RLL Z34 or Nismo 551A0-RLLRZ, SPL
rear toe arms #SPL RTA Z34, SPL rear traction arms #SPL RTR Z34 or Nismo 55110-RTRRZ, SPL front camber arms #SPL FUA Z34 or
54525-FUAZ4, SPL rear mid link #SPL RML Z34 or Nismo 551B0-RMLZ4. Zspeed and Z1 alternative clutch slave permitted. The
following STOPTECH parts are allowed with a 50 Lb penalty: #83.488.6800.51 front, 83.657.0057.51 rear.

2023-07-01 T4 2002-2006 Mini Cooper S R53 Spec Line Request

#34336 from Aaron Fitzsimmons · Rule change · TB 23-06 (2023-07 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mini Cooper S (02-04), change Weight as follows:
"2750 2700"
In T4 Spec Lines, Mini Cooper S (05-06), change Weight as follows:
"2750 2700"

2023-08-01 T2 Rules Clarification for Mazda RX8 Spec Line

#34395 from Colin Koehler · Rule change · TB 23-08 (2023-08 Fastrack)

Summary

As printed in Fastrack

In T3 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), change notes as follows:
"Use of 2009 R3 transmission is permitted with alternate gear ratios as listed. R3 transmission must be paired with the listed
alternate final drive. Front sway bar permitted 32mm MAX rear sway bar 19 MAX, Front springs max 750, 500 rear. Cold air
intake permitted. Header permitted. Aftermarket flywheel and single disc clutch permitted with no weight penalty."
In T4 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), change notes as follows:
"Mazdaspeed radiator #0000-01-8501 allowed. Use of 2009 R3 transmission is permitted with alternate gear ratios as listed. R3
transmission must be paired with the listed alternate final drive. Mazdaspeed coil spring kit #QSEA-34-01Z allowed. 60mm flat
plate restrictor required. OE Rear spoiler allowed #F151-V4-920F. OE front air dam allowed #F151-V4-900f-BB. Springs Allowed:

2023-08-01 T4 Rules Clarification for Mazda RX8 Spec Line

#34395 from Colin Koehler · Rule change · TB 23-08 (2023-08 Fastrack)

Summary

As printed in Fastrack

In T3 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), change notes as follows:
"Use of 2009 R3 transmission is permitted with alternate gear ratios as listed. R3 transmission must be paired with the listed
alternate final drive. Front sway bar permitted 32mm MAX rear sway bar 19 MAX, Front springs max 750, 500 rear. Cold air
intake permitted. Header permitted. Aftermarket flywheel and single disc clutch permitted with no weight penalty."
In T4 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), change notes as follows:
"Mazdaspeed radiator #0000-01-8501 allowed. Use of 2009 R3 transmission is permitted with alternate gear ratios as listed. R3
transmission must be paired with the listed alternate final drive. Mazdaspeed coil spring kit #QSEA-34-01Z allowed. 60mm flat
plate restrictor required. OE Rear spoiler allowed #F151-V4-920F. OE front air dam allowed #F151-V4-900f-BB. Springs Allowed:

2023-08-01 T2 rule book corrections

#34437 from Chi Ho · Rule change · TB 23-08 (2023-08 Fastrack)

Summary

As printed in Fastrack

In T3 Spec Lines, BMW 320i (14-15), add to Notes the following:
"Aftermarket intercooler permitted."
In T4 Spec Lines, BMW 320i (14-15), remove from Notes the following:
"Aftermarket intercooler permitted."

2023-08-01 T4 rule book corrections

#34437 from Chi Ho · Rule change · TB 23-08 (2023-08 Fastrack)

Summary

As printed in Fastrack

In T3 Spec Lines, BMW 320i (14-15), add to Notes the following:
"Aftermarket intercooler permitted."
In T4 Spec Lines, BMW 320i (14-15), remove from Notes the following:
"Aftermarket intercooler permitted."

2023-08-01 T2 Corvette LS2 Restrictor Plate Adjustment

#34456 from Brian LaCroix · Rule change · TB 23-08 (2023-05 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Chevrolet Corvette C6 Coupe / Grand Sport (05-13), change Notes as follows:
"LS2: 58mm 60mm flat plate restrictor is required."

2023-08-01 T2 Ride Height Correction for the T3 Solstice.

#34615 from Joe Aquilante · Rule change · TB 23-08 (2023-08 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Pontiac Solstice GXP Coupe / Convertible (07-09), add to Notes the following:
"Minimum ride height is 3 inches."
In T3 Spec Lines, Pontiac Solstice GXP Coupe / Convertible (07-09), add to Notes the following:
"Minimum ride height is 3 inches."

2023-08-01 T4 Ride Height Correction for the T3 Solstice.

#34615 from Joe Aquilante · Rule change · TB 23-08 (2023-08 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Pontiac Solstice GXP Coupe / Convertible (07-09), add to Notes the following:
"Minimum ride height is 3 inches."
In T3 Spec Lines, Pontiac Solstice GXP Coupe / Convertible (07-09), add to Notes the following:
"Minimum ride height is 3 inches."

2023-08-01 T2 Blacking Cadillac Fuel Capacity

#34624 from John Heinricy · Rule change · TB 23-08 (2023-05 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Cadillac CT4-V Blackwing (2022-), add to Notes the following:
"Radium fuel surge tank permitted. Radium tank and all associated hoses must be located behind a fireproof bulkhead or in the
engine compartment."

2023-09-01 T4 Inclusion of similar car. (CLK 320)

#34626 from Patrick Morgan · Rule change · TB 23-09 (2023-09 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mercedes Benz CLK 320 Coupe (2004), change as follows:
"Mercedes Benz CLK 320 Coupe, C320 Sedan (2004 2000-2007)

2023-12-01 T2 M2 CS RACING

#35122 from Clark Giguiere · Rule change · TB 23-12 (2023-12 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, BMW M2 CS Cup 2020-, add to Notes the following:
"Hood vents conforming to 9.1.9.2.D.8.a.7 are permitted."

2023-12-01 P2 Correct Table 1 for Engine Date Range Specifications

#35182 from Formula/Sports Racing Committee · Rule change · TB 23-12 (2023-09 Fastrack)

Summary

As printed in Fastrack

In P2 Table 1, change as follows:
P2 Table 1 (Spec Line Cars)

A specification table follows in the original; it is not shown here.

2024-01-01 T4 Mazda MX-5 ND1 Spec Line Request

#34232 from Josh Smith · Rule change · TB 24-01 (2024-01 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mazda MX-5 Miata/Club/ RF (16-18), change as follows:
Weight: "2650 2700"
Notes: "Factory bolt-in roll bar/ cross member may be removed to facilitate roll cage installation. The following item(s) must
remain stock: transmission differential unless specified below. Retractable hardtop option permitted but must be disabled from
moving action and positively fastened. Any OEM or aftermarket hardtop is permitted that retains the OEM roof silhouette,
including Mazda hardtop part #0000-07-5902-ND and part #0000-07-5901 (discontinued DG Motorsports). 29mm (f) 16mm (r)
sway bars allowed. Suspension package permitted with a 100 lbs. weight increase that includes the following parts: front springs
#0000-04-9700-08, rear springs #0000-04-9400-07, helper springs #0000-04-HLPR-EB (optional). Up to 500lb front and 300lb rear

2024-01-01 T4 BRZ/FRS/86 Spring Allowance

#35038 from Luis Goncalves · Rule change · TB 24-01 (2024-01 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Scion FR-S/10 series (13-16), change Notes as follows:
"Eibach 82105.320, 4.10582 and SPC 67660 allowed. Eibach 82105.320 sway bar kit allowed. Eibach 4.10582 springs or 225 lb (f)
and 300 lb (r) springs allowed. SPC 67660 allowed. Front strut tower brace allowed. Raceseng, part # raceseng-ft86-r-shock-top
permitted. Non-OEM limited slip differential allowed with +50 lbs. weight penalty. 55mm flat plate restrictor required. Only 17”
wheels permitted."
In T4 Spec Lines, Subaru BRZ/ BRZ Limited (13-16), change Notes as follows:
"Eibach 82105.320, 4.10582 and SPC 67660 allowed. Eibach 82105.320 sway bar kit allowed. Eibach 4.10582 springs or 225 lb (f)
and 300 lb (r) springs allowed. SPC 67660 allowed. Front strut tower brace allowed. Raceseng, part # raceseng-ft86-r-shock-top

2024-01-01 T2 Rebalance Blackwing Cadillac T2

#35079 from John Heinricy · Rule change · TB 24-01 (2024-01 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Cadillac CT4-V Blackwing (2022-), change as follows:
Wheel size: "(F) 18 x 10 (R) 18 x 11"
Notes: "Sway bars permitted 35mm (f), 30mm (r)"

2024-01-01 T2 M2 CS RACING

#35130 from Clark Giguiere · Rule change · TB 24-01 (2024-01 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, BMW M2 CS Cup (2020-), change weight as follows:
"3600 3550"
In T2 Spec Lines, BMW M235iR (-2016), change weight as follows:
"3350 3300"

2024-01-01 T2 Spec Corvette in T2

#35139 from David Sanders · Rule change · TB 24-01 (2024-01 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Spec Corvette, change as follows:
Weight: "3375 3200"
Notes: "Cars must comply with all Spec Corvette rules dated 3-1-2 1 11-28-22 including fuel and tires. No tire treatment or
rubber softeners are permitted. T2 requirements of 3.75” min ride height and 53mm flat plate restrictor required. Any 295 DOT
tire approved with +200lb. Limited to 380 HP. Nankang NS-2R Tires conforming to Spec Corvette rules are required."

2024-01-01 T2 T2 Viper BoP

#35155 from Scotty B White · Rule change · TB 24-01 (2024-01 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Dodge Viper SRT-10 incl. coupe (03-06), change Tire Size as follows:
"(F) 315/35 (R) 345/30 335/30"

2024-01-01 T2 BOP Adjustment for 5.0L Mustangs

#35156 from Kurt Rezzetano · Rule change · TB 24-01 (2024-01 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Ford Mustang GT 5.0L (11-14), change as follows:
Min weight: "3500 3575"
Notes: "58mm 60mm flat plate restrictor required."
In T2 Spec Lines, Ford Mustang GT 5.0L (15-17), change as follows:
Min Weight: "3600 3650"
Notes: "58mm 59mm flat plate restrictor required."
In T2 Spec Lines, Ford Mustang GT5.0L(2018-), change as follows:
Min Weight: "3600 3650"

Applies to Ford Mustang on this page: Scotty B White

2024-01-01 T2 Take at Look at T-2 BOP

#35161 from Joe Aquilante · Rule change · TB 24-01 (2024-01 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Chevrolet Camaro, 1LE (2016-), change as follows:
Min Weight: "3550 3500"
Notes: "56mm 58mm flat plate restrictor required."

2024-01-01 T2 C5 Corvette Spec Line Oversight

#35169 from Carl Fung · Rule change · TB 24-01 (2024-01 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Chevrolet Corvette C-5 Incl. Fxd Cpe (98-04) Z06 (hardtop) (01-04), change as follows:
Min Weight: :3425 w/56mm flat plate restrictor)"
Notes: "59mm flat plate restrictor required."
In T2 Spec Lines, Chevrolet Corvette C6 Coupe / Grand Sport (05-13) change Notes as follows:
"LS2: 60mm 63mm flat plate restrictor is required. LS3: 50mm 53mm flat plate restrictor is required."

Applies to Chevrolet Corvette on this page: Josh Carroll, David Holmes, Patrick Howe, Evan Gold, Greg Nester, Michael Cheney, Luis Martinez

2024-01-01 T4 TSX Allowance

#35219 from Oscar Jackson · Rule change · TB 24-01 (2024-01 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Acura TSX (2004-2008), add to Notes the following:
"Header allowed."

2024-01-01 P2 E&O - Clarify B.1 modified engine range in AMAC spec lines

#35225 from Club Racing Board · Rule change · TB 24-01 (2024-01 Fastrack)

Summary

As printed in Fastrack

In P2 Table 1, change as follows:
P2 Table 1 (Spec Line Cars)

A specification table follows in the original; it is not shown here.

2024-01-01 T2 Requested Update of Model Years of 370Z

#35231 from Richard Kulach · Rule change · TB 24-01 (2024-01 Fastrack)

Summary

As printed in Fastrack

In T3 Spec Lines, Nissan 370Z (09-16) / 370Z NISMO Edition (09-13), change model as follows:
"Nissan 370Z (09-16) / 370Z NISMO Edition (09-13) ,incl. Nismo (2009-2022)"

2024-01-01 T4 Requested Update of Model Years of 370Z

#35231 from Richard Kulach · Rule change · TB 24-01 (2024-01 Fastrack)

Summary

As printed in Fastrack

In T3 Spec Lines, Nissan 370Z (09-16) / 370Z NISMO Edition (09-13), change model as follows:
"Nissan 370Z (09-16) / 370Z NISMO Edition (09-13) ,incl. Nismo (2009-2022)"

2024-01-01 P2 Replacement Engine Crankcase for 07/08 Suzuki GSX-R1000 Engines

#35340 from Michael A Reupert · Rule change · TB 24-01 (2024-01 Fastrack)

Summary

As printed in Fastrack

In P2 Engine Table, Spec Line B.1, add to notes as follows:
"No modifications allowed on engines manufactured after 2008 model year. 2007-2008 Suzuki GSX-R1000 crankcase part
#11300-21860 may be replaced with 2016-2019 Suzuki GSX-S1000 crankcase part #11301-04840."

2024-02-01 T2 2015+ Mustang Sway Bar and A-Arm Request

#35154 from Scotty B White · Rule change · TB 24-02 (2024-01 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Ford Mustang GT 5.0L (15-17), add to Notes the following:
"BMR rear upper control arm camber links part #UTCA064 permitted."

Applies to Ford Mustang on this page: Scotty B White

2024-02-01 T2 Brake Kits

#35245 from David Woodle · Rule change · TB 24-02 (2024-01 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, add to Notes the following:
Chevrolet Camaro SS (98-02): “Four or six piston front calipers allowed.”
Chevrolet Camaro, 1LE (2016-): “Four or six piston front calipers allowed.”
Chevrolet Corvette C-5 Incl. Fxd Cpe (98-04) Z06 (hardtop) (01-04): “Four or six piston front calipers allowed.”
Chevrolet Corvette C6 Coupe / Grand Sport (05-13): “Four or six piston front calipers allowed.”
Chevrolet Corvette Z06 (06-12): “Four or six piston front calipers allowed.”
Pontiac Firebird (98-02): “Four or six piston front calipers allowed.”
Pontiac Solstice GXP Coupe/Convertible (07-09): “Four or six piston front calipers allowed.”

2024-02-01 T2 More Car Lightening Stuff

#35319 from Scotty B White · Rule change · TB 24-02 (2024-02 Fastrack)

Summary

As printed in Fastrack

In GCR, Section 9.1.9.2.D.1.g.3., change as follows:
"Batteries may be replaced provided the replacement is capable of starting the car. Batteries may not be relocated
unless noted on the spec line. Batteries must be adequately secured. Battery labeling must conform to 9.3.35.D. with
those of an alternate manufacturer, provided they are of similar amp-hour capacity, size and within 10% of OEM
weight."

2024-02-01 T4 More Car Lightening Stuff

#35319 from Scotty B White · Rule change · TB 24-02 (2024-02 Fastrack)

Summary

As printed in Fastrack

In GCR, Section 9.1.9.2.D.1.g.3., change as follows:
"Batteries may be replaced provided the replacement is capable of starting the car. Batteries may not be relocated
unless noted on the spec line. Batteries must be adequately secured. Battery labeling must conform to 9.3.35.D. with
those of an alternate manufacturer, provided they are of similar amp-hour capacity, size and within 10% of OEM
weight."

2024-02-01 T4 ND Missed Items

#35352 from Touring Committee · Rule change · TB 24-02 (2024-02 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), add to Notes the following:
"3rd and 4th gear may be replaced with the following parts- (0000-02-5803-02, 0000-02-5803-01, 0000-02-5804-
02, 0000-02-5804-01)."
In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-21), add to Notes the following:
"3rd and 4th gear may be replaced with the following parts- (0000-02-5803-02, 0000-02-5803-01, 0000-02-5804-
02, 0000-02-5804-01)."

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2024-02-01 T2 Inclusion of B-C spec cars in T4

#35374 from Touring Committee · Rule change · TB 24-02 (2024-02 Fastrack)

Summary

As printed in Fastrack

In GCR, Section 9.1.9.2., change as follows:
"Touring car eligibility: Cars are eligible for the class they are listed with a specification line and with the specific
allowances permitted. In addition, T2-T4 cars may race one class up in touring classes above their specification line class
as long as they are a legal T2-T4 car and conform to their specification line allowances as classified. Cars conforming to
C-Spec rules are permitted to compete in Touring 4."

2024-02-01 T4 Inclusion of B-C spec cars in T4

#35374 from Touring Committee · Rule change · TB 24-02 (2024-02 Fastrack)

Summary

As printed in Fastrack

In GCR, Section 9.1.9.2., change as follows:
"Touring car eligibility: Cars are eligible for the class they are listed with a specification line and with the specific
allowances permitted. In addition, T2-T4 cars may race one class up in touring classes above their specification line class
as long as they are a legal T2-T4 car and conform to their specification line allowances as classified. Cars conforming to
C-Spec rules are permitted to compete in Touring 4."

2024-02-01 T2 Runoffs wording on Caddy in T2

#35377 from Touring Committee · Rule change · TB 24-02 (2024-01 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Cadillac CT4-V Blackwing(2022-), change Notes as follows:
"THIS CAR DOES NOT QUALIFY FOR SCCA RUNOFFS COMPETITION UNTIL IT HAS BEENREPRESENTED IN 3 SCCA SUPER
TOUR EVENTS."

2024-02-01 T2 T2-T4 Set expiration dates on spec lines

#35378 from Touring Committee · Rule change · TB 24-02 (2024-02 Fastrack)

Summary

As printed in Fastrack

In T2-T4 Spec Lines, add **This Spec line will expire 12/31/24, Please submit to appeal**
to Notes to the following Spec Lines:
T2:
Acura TL SHAWD (10-13)
Audi S4 (12-14)
Audi S5 (13-14)
Audi TT RS (2018-)
Cadillac ATS-V (16-17)

2024-02-01 T4 T2-T4 Set expiration dates on spec lines

#35378 from Touring Committee · Rule change · TB 24-02 (2024-02 Fastrack)

Summary

As printed in Fastrack

In T2-T4 Spec Lines, add **This Spec line will expire 12/31/24, Please submit to appeal**
to Notes to the following Spec Lines:
T2:
Acura TL SHAWD (10-13)
Audi S4 (12-14)
Audi S5 (13-14)
Audi TT RS (2018-)
Cadillac ATS-V (16-17)

2024-02-01 T2 Reply to letter #35161 and #31661

#35384 from Andrew Aquilante · Rule change · TB 24-02 (2024-02 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Chevrolet Camaro, 1LE (2016-), change as follows:
Min Weight: "3500 3575"
Notes: "58mm 60mm flat plate restrictor required"

2024-03-01 T2 Reorganize Spec Lines

#35375 from Touring Committee · Rule change · TB 24-03 (2024-03 Fastrack)

Summary

As printed in Fastrack

In T2-T4 Spec Lines, change Spec Line as follows:
"Wheel- base (mm) Required Restrictor"

2024-03-01 T4 Reorganize Spec Lines

#35375 from Touring Committee · Rule change · TB 24-03 (2024-03 Fastrack)

Summary

As printed in Fastrack

In T2-T4 Spec Lines, change Spec Line as follows:
"Wheel- base (mm) Required Restrictor"

2024-03-01 T4 Allow any 400lb rear spring in the RX8

#35433 from Raymond Blethen · Rule change · TB 24-03 (2024-03 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), change Notes as follows:
"Mazda Motorsports- 0000- 04-9700-08 or Eibach- 0800.250.0700 (R) Mazda Motorsports- 0000-04-9400-07 or Eibach
0700.250.0400, and helper 0000-04-9926 allowed. Springs allowed 700lb (f), 400(r)."

2024-03-01 T2 370Z Brake Rotor Size Correction

#35487 from Derek Chan · Rule change · TB 24-03 (2024-03 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Nissan 370Z (09-17) / 370Z NISMO Edition (09-17), change Brakes (mm) as follows:
"(F)320 x 28 Vented R)320 x 16 Vented : (F) 355x32mm Vented(R) 350x20mm Vented”
In T3 Spec Lines, Nissan 370Z, incl. Nismo (2009-2022), change Brakes (mm) as follows:
"(F)320 x 28 Vented (R)320 x 16 Vented : (F) 355x32mm Vented(R) 350x20mm Vented”

2024-03-01 T4 370Z Brake Rotor Size Correction

#35487 from Derek Chan · Rule change · TB 24-03 (2024-03 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Nissan 370Z (09-17) / 370Z NISMO Edition (09-17), change Brakes (mm) as follows:
"(F)320 x 28 Vented R)320 x 16 Vented : (F) 355x32mm Vented(R) 350x20mm Vented”
In T3 Spec Lines, Nissan 370Z, incl. Nismo (2009-2022), change Brakes (mm) as follows:
"(F)320 x 28 Vented (R)320 x 16 Vented : (F) 355x32mm Vented(R) 350x20mm Vented”

2024-03-01 T2 Letter #35154 2018+ Mustang GT Expansion

#35488 from Michael Kamalian · Rule change · TB 24-03 (2024-03 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Ford Mustang GT 5.0L (2018-), add to Notes as follows:
"BMR rear upper control arm camber links part #UTCA064 permitted."

Applies to Ford Mustang on this page: Scotty B White

2024-04-01 T2 Brake Request for 2009 Porsche Cayman

#35723 from Jason Ott · Rule change · TB 24-04 (2024-04 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Porsche Cayman S (06-09), add to Notes the following:
"The following brake kit is allowed in its entirety with a 50 lb penalty- (f) StopTech ST60 (83.788.6700), rotor size 355X32
(r) StopTech ST40 (83.799.0046), rotor size 332X32."

2024-04-01 T4 Corrections to T4 RX8 Spec line

#35767 from Touring Committee · Rule change · TB 24-04 (2024-04 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), change Notes as follows:
"Mazdaspeed radiator #0000-01-8501 allowed. Mazdaspeed coil spring kit #QSEA-34-01Z allowed. OE Rear spoiler allowed
#F151-V4-920F. OE front air dam allowed #F151-V4-900f-BB. Springs allowed 700lb (f) max, 400(r) max. Oil metering pump may
be bypassed. Alternate sway bars allowed max 32mm (f) 19mm (r)."

2024-05-01 T2 Allow T4 and T3 RX8 to Disable/Remove Factory Oil Inj.

#35761 from David Mead · Rule change · TB 24-05 (2024-05 Fastrack)

Summary

As printed in Fastrack

In T3 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), add to Notes as follows:
"OEM oil injection system may be removed or disabled."
In T4 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), add to Notes as follows:
"OEM oil injection system may be removed or disabled."

2024-05-01 T4 Allow T4 and T3 RX8 to Disable/Remove Factory Oil Inj.

#35761 from David Mead · Rule change · TB 24-05 (2024-05 Fastrack)

Summary

As printed in Fastrack

In T3 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), add to Notes as follows:
"OEM oil injection system may be removed or disabled."
In T4 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), add to Notes as follows:
"OEM oil injection system may be removed or disabled."

2024-05-01 P2 CN Spec ECU

#35835 from Bart Wolf · Rule change · TB 24-05 (2024-05 Fastrack)

Summary

As printed in Fastrack

In P2 Engine Table, Spec Line E, change the notes as follows:
"No engine modifications except for dry sump oil system, ECU mapping, and exhaust system the following: oil system, ECU, and
exhaust are unrestricted."

2024-05-01 T4 2023 ND2 Miata Classification and Allowances

#35837 from Coyote Black · Rule change · TB 24-05 (2024-05 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-21), change Year as follows:
"(19-21 24)"
In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-21), add to Notes as follows:
"Suspension package permitted with a 100 lbs. weight increase that includes the following parts: front springs #0000-04-9700-
08, springs up to 500lb front and 300lb rear allowed. Mazda tower brace 0000-04-5626 allowed."

2024-05-01 T4 Errors and Omissions for 06-09 VW Rabbit Rotor

#35851 from Andrew Burke · Rule change · TB 24-05 (2024-05 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Volkswagen Rabbit 2.5 (06-09), change Brakes as follows:
"(F) 228 288 Vented Disc (R) 260 Solid Disc"

2024-05-01 T2 Competition Adjustment Request/Wheel Size of E46

#35895 from David Newman · Rule change · TB 24-05 (2024-05 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, BMW M3 (01-06), change Max Wheel Size (inch) as follows:
"18 x 9 18 x 10"

2024-05-01 P2 E&O - Correct FIA Group CN spec line notes

#35900 from Club Racing Board · Rule change · TB 24-05 (2024-05 Fastrack)

Summary

As printed in Fastrack

In P2 Table 1, FIA Group CN spec line, change the notes as follows:
"FIA Group CN homologated chassis, brake calipers and discs, hub carriers, and suspension components are required. V de
V European Proto Endurance Series Challenge permitted bodywork, rear diffuser, wing, wheels, and assisted
shifting are allowed. Car M must comply with all other P2 requirements. Competitors must have copies of FIA Group CN
Technical Regulations and V de V European Proto Endurance Series Challenge Sporting and Technical Regulations in their
possession and present them upon request are available here: https://www.scca.com/pages/technical-forms-and-downloads."

2024-05-01 T2 Driveshafts

#35916 from Scotty B White · Rule change · TB 24-05 (2024-05 Fastrack)

Summary

As printed in Fastrack

In GCR Section 9.1.9.2.D.4.b., add the following:
"6. T2-T3- Driveshafts may be replaced with alternative materials ie. carbon fiber, aluminum, steel. Two-piece driveshafts may
be replaced with one-piece units. If non-OEM driveshaft is used, add 25 lbs."

2024-05-01 T4 Driveshafts

#35916 from Scotty B White · Rule change · TB 24-05 (2024-05 Fastrack)

Summary

As printed in Fastrack

In GCR Section 9.1.9.2.D.4.b., add the following:
"6. T2-T3- Driveshafts may be replaced with alternative materials ie. carbon fiber, aluminum, steel. Two-piece driveshafts may
be replaced with one-piece units. If non-OEM driveshaft is used, add 25 lbs."

2024-05-01 T4 GCR ERROR - letter not properly applied to GCR

#35999 from Touring Committee · Rule change · TB 24-05 (2024-05 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), change Notes as follows:
"Factory bolt-in roll bar/ cross member may be removed to facilitate roll cage installation. The following item(s) must remain
stock: transmission differential unless specified below. Retractable hardtop option permitted but must be disabled from moving
action and positively fastened. Any OEM or aftermarket hardtop is permitted that retains the OEM roof silhouette, including
Mazda hardtop part #0000-07-5902-ND and part #0000-07-5901 (discontinued DG Motorsports). 29mm (f) 16mm (r) sway bars
allowed. Suspension package permitted with a 100 lbs. weight increase that includes the following parts: front springs #0000-
04-9700-08, rear springs #0000-04-9400-07, helper springs #0000-04-HLPR-EB (optional). Up to 500lb front and 300lb rear
springs allowed. Mazda Motorsports Header part #0000-06-5410 allowed. Mazda tower brace 0000-04-5626 allowed."

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2024-06-01 T4 Allow OEM Front Spoiler 06-08 Miata in T4

#35941 from David Mead · Rule change · TB 24-06 (2024-06 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mazda MX-5 / Club Model (06-15), add to Notes the following: "Front
spoiler permitted (NF51-V4-900F)."

Applies to Mazda MX-5 on this page: Oscar Jackson

2024-06-01 T4 T4 Mustang Weight Reduction In T4 Spec

#36051 from Scotty B White · Rule change · TB 24-06 (2024-06 Fastrack)

Summary

As printed in Fastrack

Lines, Ford Mustang V6 (05-10), change as follows:
Weight: "3275 3225"
Notes: "14” Brembo Brake Kit#M-2300-S permitted."

2024-06-01 T4 R53 Mini Cooper S spec line request In

#36056 from Manvinder Singh · Rule change · TB 24-06 (2024-06 Fastrack)

Summary

As printed in Fastrack

T4 Spec Lines, Mini Cooper S (02-04), add to Notes the following:
"Milltek exhaust manifold #SSXM459 allowed. 25mm rear sway bar allowed."
T4 Spec Lines, Mini Cooper S (05-06), add to Notes the following:
"Milltek exhaust manifold #SSXM459 allowed. 25mm rear sway bar allowed."

2024-07-01 T2 Mustang T2/T3

#35877 from Scotty B White · Rule change · TB 24-07 (2024-07 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Ford Mustang GT 5.0L (15-17), add to Notes as follows:
"Track/Performance Package parts permitted."
In T2 Spec Lines, Ford Mustang GT 5.0L (2018-), add to Notes as follows:
"Track/Performance Package parts permitted."
In T3 Spec Lines, Ford Mustang V6 (15-17), change Notes as follows:
"Track/Performance package allowed."

Applies to Ford Mustang on this page: Scotty B White

2024-07-01 T4 Mustang T2/T3

#35877 from Scotty B White · Rule change · TB 24-07 (2024-07 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Ford Mustang GT 5.0L (15-17), add to Notes as follows:
"Track/Performance Package parts permitted."
In T2 Spec Lines, Ford Mustang GT 5.0L (2018-), add to Notes as follows:
"Track/Performance Package parts permitted."
In T3 Spec Lines, Ford Mustang V6 (15-17), change Notes as follows:
"Track/Performance package allowed."

Applies to Ford Mustang on this page: Scotty B White

2024-07-01 T2 S550 Brakes

#35926 from Scotty B White · Rule change · TB 24-07 (2024-07 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Ford Mustang Ecoboost 2.3 (2015-), add to Notes the following:
"100LB for Mustang S550 2015-17 5.0 Gen2 and 2018-23 5.0. Gen3 reduce weight by 100Lb when using 4 piston stock
or Brembo brakes with 355mm rotors."

2024-07-01 T4 Homologation of car to T4

#36030 from Patrick E Morgan · Rule change · TB 24-07 (2024-07 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mercedes C300 4Matic (2008-2011), classify as follows:

A specification table follows in the original; it is not shown here.

2024-07-01 T2 T2-T4 Driveshaft Mistake...?

#36050 from Scotty B White · Rule change · TB 24-07 (2024-07 Fastrack)

Summary

As printed in Fastrack

In GCR Section 9.1.9.2.D.4.b.6., remove as follows:
"If non-OEM driveshaft is used, add 25 lbs."
In T2 Spec Lines, Ford Mustang V6 (11-14), change Notes as follows:
"Driveshaft from Alternate metallic driveshaft is allowed."
In T2 Spec Lines, Ford Mustang Boss 302 (12-13), change Notes as follows:
"Alternate metallic driveshaft is allowed."
In T2 Spec Lines, Ford Mustang GT 5.0L (11-14)ki, change Notes as follows:
"Alternate metallic driveshaft is allowed."

Applies to Ford Mustang on this page: Scotty B White

2024-07-01 T4 T2-T4 Driveshaft Mistake...?

#36050 from Scotty B White · Rule change · TB 24-07 (2024-07 Fastrack)

Summary

As printed in Fastrack

In GCR Section 9.1.9.2.D.4.b.6., remove as follows:
"If non-OEM driveshaft is used, add 25 lbs."
In T2 Spec Lines, Ford Mustang V6 (11-14), change Notes as follows:
"Driveshaft from Alternate metallic driveshaft is allowed."
In T2 Spec Lines, Ford Mustang Boss 302 (12-13), change Notes as follows:
"Alternate metallic driveshaft is allowed."
In T2 Spec Lines, Ford Mustang GT 5.0L (11-14)ki, change Notes as follows:
"Alternate metallic driveshaft is allowed."

Applies to Ford Mustang on this page: Scotty B White

2024-07-01 T4 MINI Cooper S Spec Lines Corrections.

#36086 from David Oliveira · Rule change · TB 24-07 (2024-07 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mini Cooper S (02-04), delete spec line in its entirety.
In T4 Spec Lines, Mini Cooper S (05-06), change Model as follows:
"Mini Cooper S R53 (0205-06)"
In T4 Spec Lines, Mini Cooper S (07-13), change Model and Notes as follows:
"Mini Cooper S R56 (07-13)"
Notes: "The following items must remain stock: shock/struts (including mounts), original wheels, and transmission
differential - unless specified below. Convertible model not allowed. Factory optional limited slip differential allowed.
JCW struts (F) 31 31 6 768 410 (R)33 52 6 768 412, springs (F)31 33 6 768 415 (R)33 53 6 768 418. May de-camber

2024-07-01 T2 request for allowance of 6 piston calipers for T2 C5 corvettes

#36126 from Joe Aquilante · Rule change · TB 24-07 (2024-07 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, add to Notes the following:
Chevrolet Camaro SS (98-02): Four or six piston front calipers allowed.
Chevrolet Camaro, 1LE (2016-): Four or six piston front calipers allowed.
Chevrolet Corvette C-5 Incl. Fxd Cpe (98-04) Z06 (hardtop) (01-04): Four or six piston front calipers allowed.
Chevrolet Corvette C6 Coupe / Grand Sport (05-13): Four or six piston front calipers allowed.
Chevrolet Corvette Z06 (06-12): Four or six piston front calipers allowed.
Pontiac Firebird (98-02): Four or six piston front calipers allowed.
Pontiac Solstice GXP Coupe/Convertible (07-09): Four or six piston front calipers allowed.

2024-07-01 T4 Allow Removal of Sound Tubes

#36130 from Coyote Black · Rule change · TB 24-07 (2024-07 Fastrack)

Summary

As printed in Fastrack

In GCR Section 9.1.9.2.D.1.b., add the following:
"2. OEM intake- Chambers, resonators and acoustic devices may be removed, provided; that their ports are located
prior to any required restrictor, their ports are completely sealed, and that the part serves no other purpose."

2024-07-01 T2 B8/8.5 Audi S4 T3 and T2

#36195 from Brian Leib · Rule change · TB 24-07 (2024-07 Fastrack)

Summary

As printed in Fastrack

In T3 Spec Lines, Classify Audi S4 (2000-2002) as follows and allow the T2 spec line to expire.

A specification table follows in the original; it is not shown here.

2024-07-01 T4 B8/8.5 Audi S4 T3 and T2

#36195 from Brian Leib · Rule change · TB 24-07 (2024-07 Fastrack)

Summary

As printed in Fastrack

In T3 Spec Lines, Classify Audi S4 (2000-2002) as follows and allow the T2 spec line to expire.

A specification table follows in the original; it is not shown here.

2024-08-01 T2 Errors

#36214 from Touring Committee · Rule change · TB 24-08 (2024-08 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Chevrolet Corvette C6 Coupe / Grand Sport (05-13), change Required Restrictor as follows:
"LS2: "53 63mm flat plate restrictor"
In T2 Spec Lines, Chevrolet Camaro, 1LE (2016-), change as follows:
Min Weight: "3575 3500"
Required Restrictor: "60mm FRP 58mm flat plate restrictor"

2024-08-01 T4 T4 Camaro V6 weight reduction

#36232 from Ted Warning · Rule change · TB 24-08 (2024-08 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Chevrolet Camaro V-6 (96-02), change weight as follows:
"3250 3150"

2024-08-01 T2 Subaru Appeal

#36258 from Anthony Piselli III · Rule change · TB 24-08 (2024-08 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Subaru Impreza WRX STi (03-07), change Notes as follows:
"**This Spec line will expire 12/31/24, Please submit to appeal**"
In T2 Spec Lines, Subaru Impreza WRX STi (08-11), change Notes as follows:
"**This Spec line will expire 12/31/24, Please submit to appeal**"

2024-08-01 T4 BOP adjustment for ND MX5s

#36345 from Touring Committee · Rule change · TB 24-08 (2024-08 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, change Weight (lbs) as follows:
Mazda MX-5 Miata/Club (16-18): "2700 2650"
Mazda MX5 Miata/Club/ RF (19-24): "2800 2750"

2024-08-01 T2 S550 Brakes

#36571 from Club Racing Board · Rule change · TB 24-08 (2024-08 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Ford Mustang GT 5.0L (15-17), add to Notes as follows:
"Mustang S550 2015-17 5.0 Gen2 and 2018-23 5.0. Gen3 reduce weight by 100Lb when using 4 piston stock or Brembo brakes
with 355mm rotors."
In T2 Spec Lines, Ford Mustang GT 5.0L (18 -), add to Notes as follows:
"Mustang S550 2015-17 5.0 Gen2 and 2018-23 5.0. Gen3 reduce weight by 100Lb when using 4 piston stock or Brembo brakes
with 355mm rotors."
In T2 Spec Lines, Ford Mustang Ecoboost 2.3 (2015-), change Notes as follows:
"Reduce weight by 100Lb when using either stock 355mm 4 piston brakes or m2300s 355mm 4 piston Ford brake kit."

Applies to Ford Mustang on this page: Scotty B White

2024-11-01 T4 Bop Request 06-11 Honda Civic Si

#37013 from Mathew Milford · Rule change · TB 24-11 (2024-11 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Honda Civic Si (06-11), add to Notes the following:
"LSD is permitted according to category rules."

2024-11-01 T2 Spec Corvette Change for T2

#37127 from Joe Aquilante · Rule change · TB 24-11 (2024-11 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Spec Corvette, change Notes as follows:
"Cars must comply with all Spec Corvette rules dated 11-28-22 including fuel and tires. No tire treatment or rubber softeners are
permitted. Limited to 380 HP. Nankang NS-2R Tires conforming to Spec Corvette rules are required or a 295 R compound DOT
tire."

2024-12-01 T2 Redundant Verbiage Regarding Mustang Spec Lines for Driveshaft

#36484 from David Mead · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, change Notes as follows:
Ford Mustang V6 (11-14): "Alternate driveshaft is allowed."
Ford Mustang Boss 302 (12-13): "Alternate driveshaft is allowed."
Ford Mustang GT 5.0L (11-14): "Alternate driveshaft is allowed."
Ford Mustang GT 5.0L (15-17): "Alternate driveshaft is allowed."
Ford Mustang GT 5.0L (2018-): "Alternate driveshaft is allowed. Springs up to 800#/in front and rear permitted. Alternate
metallic driveshaft permitted."
Ford Mustang Coupe GT & Shelby GT 4.6L (05-10): "Alternate driveshaft is allowed."

2024-12-01 T4 Redundant Verbiage Regarding Mustang Spec Lines for Driveshaft

#36484 from David Mead · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, change Notes as follows:
Ford Mustang V6 (11-14): "Alternate driveshaft is allowed."
Ford Mustang Boss 302 (12-13): "Alternate driveshaft is allowed."
Ford Mustang GT 5.0L (11-14): "Alternate driveshaft is allowed."
Ford Mustang GT 5.0L (15-17): "Alternate driveshaft is allowed."
Ford Mustang GT 5.0L (2018-): "Alternate driveshaft is allowed. Springs up to 800#/in front and rear permitted. Alternate
metallic driveshaft permitted."
Ford Mustang Coupe GT & Shelby GT 4.6L (05-10): "Alternate driveshaft is allowed."

2024-12-01 T4 R53 Mini Cooper S Weight Reduction Request

#36612 from Manvinder Singh · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mini Cooper S R53 (02-06), add to Notes as follows:
"Alta 15% Pulley #AMPENG20X allowed."

2024-12-01 T2 Request Less Restriction for Ls-3 Engined C6 Corvette

#36810 from Joe Aquilante · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Chevrolet Corvette C6 Coupe / Grand Sport (05-13), change Restrictor Required as follows:
"LS3: 53mm 56mm flat plate restrictor"

2024-12-01 T4 Allowable Wheel Offset

#36855 from Robert Maples · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In GCR Section 9.1.9.2.D.7. Wheels and Tires, change as follows:
"a. Wheels
1. Any type wheel suitable for competition may be used, provided:
a. Any wheel not exceeding the specified diameter and rim width on the vehicle’s specification line may be used. Each wheel,
measured without weights, must weigh at least 15 lbs.
b. Wheels are permitted any offset provided the tire tread (that portion of the tire that contacts the ground) does not protrude
beyond the fender opening when viewed from 9.1.9.2.Touring (T2-T4) Category Specifications GCR - 660 the top perpendicular
to the ground, unless specified differently on the individual spec line for that car. To determine compliance the vehicle should be

2024-12-01 T2 Fuel Emissions Components

#37076 from Derrick Ambrose · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In GCR, Section 9.1.9.2.D.1.c. add the following:
"5. Removal of ancillary fuel tank equipment charcoal canisters, emissions valves, and sensors allowed for OEM or aftermarket
fuel cell installations."

2024-12-01 T4 Fuel Emissions Components

#37076 from Derrick Ambrose · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In GCR, Section 9.1.9.2.D.1.c. add the following:
"5. Removal of ancillary fuel tank equipment charcoal canisters, emissions valves, and sensors allowed for OEM or aftermarket
fuel cell installations."

2024-12-01 T4 2019-2024 Mazda 3 for T4

#37077 from Derrick Ambrose · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, classify Mazda 3 (19-24), as follows:

A specification table follows in the original; it is not shown here.

2024-12-01 T2 fix brake wording

#37129 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In GCR, Section, 9.1.9.2.D.6. Brakes, change as follows:
"a. Components
1. The make and material of brake pads and linings may be changed.
2. Brake fluid may be substituted with any brake fluid.
3. Brake rotor dust shields may be removed or replaced to accommodate brake ducts.
4. Flexible rubber brake lines may be replaced with Teflon lined, metal braided hoses.
5. Any brake ducts are permitted, but they must serve no other purpose. Fender liners may be modified solely for routing and
attachment of brake ducts. Duct intake openings may be created by the opening of 2 sections up to 14.5 square inches each in

2024-12-01 T4 fix brake wording

#37129 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In GCR, Section, 9.1.9.2.D.6. Brakes, change as follows:
"a. Components
1. The make and material of brake pads and linings may be changed.
2. Brake fluid may be substituted with any brake fluid.
3. Brake rotor dust shields may be removed or replaced to accommodate brake ducts.
4. Flexible rubber brake lines may be replaced with Teflon lined, metal braided hoses.
5. Any brake ducts are permitted, but they must serve no other purpose. Fender liners may be modified solely for routing and
attachment of brake ducts. Duct intake openings may be created by the opening of 2 sections up to 14.5 square inches each in

2024-12-01 T2 Evaporative emissions systems

#37130 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In GCR, Section, 9.1.9.2.D.1.c., add the following:
"5. Removal of ancillary fuel tank equipment; charcoal canisters, emissions valves, and sensors allowed for OEM or aftermarket
fuel cell installations."

2024-12-01 T4 Evaporative emissions systems

#37130 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In GCR, Section, 9.1.9.2.D.1.c., add the following:
"5. Removal of ancillary fuel tank equipment; charcoal canisters, emissions valves, and sensors allowed for OEM or aftermarket
fuel cell installations."

2024-12-01 T4 Allow Spec MX5 upgrade kit for 2009-11 RX8 S2 Transmision

#37140 from Chris Braunlich · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, add the following to Notes:
Mazda RX-8 Base/R3/Sport/ GT (04-12): "Transmission kit # 0000-02-5700 permitted.
Mazda MX-5 / Club Model (06-15): "Transmission kit # 0000-02-5700 permitted."
In T3 Spec Lines, add the following to Notes:
Mazda MX-5 / Club Model (06-15): "Transmission kit # 0000-02-5700 permitted."
Mazda RX-8 Base/R3/Sport/ GT (04-12): "Transmission kit # 0000-02-5700 permitted."

2024-12-01 T2 Move Spec Boxster to T4

#37158 from Rob Piekarczyk · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, classify Porsche Spec Boxster, as follows:

A specification table follows in the original; it is not shown here.

Applies to Porsche Boxster on this page: Lynne Griffiths

2024-12-01 T4 Move Spec Boxster to T4

#37158 from Rob Piekarczyk · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, classify Porsche Spec Boxster, as follows:

A specification table follows in the original; it is not shown here.

Applies to Porsche Boxster on this page: Lynne Griffiths

2024-12-01 T2 Corvette Wheels

#37169 from Brian LaCroix · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Chevrolet Corvette C6 Coupe / Grand Sport (05-13), change Max Wheel Size as follows:
"18 x 10 11 (F) 19 x 11 (R) or 18 x 11 (F) 19 x 13 (R)"

2024-12-01 P2 2000 cc Pinto Engine Car Weight

#37187 from Marvin Hodges · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In P2 Engine Table, Line E Note 2, add the following:
"8. Minimum weight 1335 lbs."

2024-12-01 T4 3.7 Mustangs to T4

#37188 from Scotty B White · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, classify Ford Mustang V6 (05-14), as follows:

A specification table follows in the original; it is not shown here.

2024-12-01 T2 BMW 320i Spec Line

#37204 from chi ho · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, BMW 320i (14-15), change Notes as follows:
"**This Spec line will expire 12/31/24, Please submit to appeal** Turner Motorsports intercooler #024703TMS02 allowed."

2024-12-01 T4 BMW 320i Spec Line

#37204 from chi ho · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, BMW 320i (14-15), change Notes as follows:
"**This Spec line will expire 12/31/24, Please submit to appeal** Turner Motorsports intercooler #024703TMS02 allowed."

2024-12-01 T4 MX5 2006-2015 NC Help

#37221 from Richard Mooney · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

Thank you for your letter. Please see changes in letter #37281 in current Fastrack.

2024-12-01 T2 Classification for a 2005 Cadillac CTS 3.6 liter 6 speed manual

#37224 from Timothy Nash · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T3 Spec Lines, classify Cadillac CTS (02-07) as follows:

2024-12-01 T4 Classification for a 2005 Cadillac CTS 3.6 liter 6 speed manual

#37224 from Timothy Nash · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T3 Spec Lines, classify Cadillac CTS (02-07) as follows:

2024-12-01 T4 Civic SI in T4

#37248 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Honda Civic Si (06-11), change as follows:
Required Restrictor: "55mm flat plate restrictor required."
Min Weight: "2950 2900"
Notes: "The following items must remain stock: transmission differential - unless specified below. 55mm flat plate restrictor
required. LSD IS PERMITTED ACCORDING TO CATEGORY RULES"

2024-12-01 T4 2006-2015 T4 NC Mx5 spec line

#37278 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mazda MX-5 / Club Model (06-15), change Notes as follows:
"Factory bolt-in roll bar/cross member may be removed to facilitate roll cage installation. MSR option permitted. Suspension
package permitted with a 100 lbs. weight increase that includes the following parts: front spring mount PT#-0000-04-5259, front
springs #0000-04-9700-08, rear spring mount PT#-0000-04-5258, rear springs #0000-04-9400-07, helper springs #0000-04-HLPR-
EB (optional), Swaybar kit – PT#-0000-04-5306-EB that includes (front sway bar kit PT#0000-04- 5306-FT, rear sway bar kit PT#-
0000-04-5306-RR), offset front camber bushing PT#-0000-04- 5407-NC. Mazda Motorsports cold air intake part #0000-06-5150-
KT allowed. Mazda Motorsport RX8 rear Hub Conversion kit part number 0000-04-5811-KT allowed, RX8 front hubs PT# F189-33-
04X allowed. The SM5 suspension (only) is allowed with a 100 lbs. weight increase. Allow Mazda header part numbers 0000-06-

Applies to Mazda MX-5 on this page: Oscar Jackson

2024-12-01 T4 ND MX-5 wheel allowance

#37279 from Josh Smith · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), change Wheel Size as follows:
"17 x 7.5"

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2024-12-01 T4 T4 BOP

#37281 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), change as follows:
Required Restrictor: "60mm 59mm"
Weight: "3125 3200"
In T4 Spec Lines, Mazda MX-5 / Club Model (06-15), change weight as follows:
"2600 2550"

Applies to Mazda MX-5 on this page: Oscar Jackson

2024-12-01 T4 Allow 7.5

#37286 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-24), change Wheel Size as follows:
"17 x 7.5"

2024-12-01 T2 Please Consider Allowing Update to the C5 Corvette

#37298 from DAVID WOODLE · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Chevrolet Corvette C-5 Incl. Fxd Cpe (98-04) Z06 (hardtop) (01-04), change Restrictor Required as follows:
"59mm FRP LS1: 59mm FPR, LS2: 63mm FPR, LS3: 56mm FPR"

Applies to Chevrolet Corvette on this page: Josh Carroll, David Holmes, Patrick Howe, Evan Gold, Greg Nester, Michael Cheney, Luis Martinez

2024-12-01 T2 Major error in lane, but nobody ran it.

#37302 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, delete Chevrolet Corvette Z06 (06-12) Spec Line in its entirety.

2025-01-01 T4 2016-2018 Mazda Miata MX5

#37085 from Nic Piekarski · Rule change · TB 25-01 (2025-01 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), change Min Weight as follows:
"2650 2575"
In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-24), add to Notes the following:
"Mazda header 0000-06-5410 allowed."

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2025-01-01 T2 BoP for the Various Mustangs

#37185 from Scotty B White · Rule change · TB 25-01 (2025-01 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Ford Mustang GT 5.0L (11-14), change as follows:
Weight: "3575 3525"

Applies to Ford Mustang on this page: Scotty B White

2025-01-01 T2 Remove spec lines that have expired

#37269 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T2, Effective 1/1/2025, delete for following Spec Lines in their entirety:
"Acura TL SHAWD (10-13)
Audi S4 (12-14)
Audi S5 (13-14)
Audi TT RS (2018-)
Cadillac ATS-V (16-17)
Cadillac CTS-V (06-07)
Chevrolet Camaro SS (98-02)

2025-01-01 T4 Remove spec lines that have expired

#37269 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

Summary

As printed in Fastrack

In T2, Effective 1/1/2025, delete for following Spec Lines in their entirety:
"Acura TL SHAWD (10-13)
Audi S4 (12-14)
Audi S5 (13-14)
Audi TT RS (2018-)
Cadillac ATS-V (16-17)
Cadillac CTS-V (06-07)
Chevrolet Camaro SS (98-02)

2025-01-01 T2 Spec Corvette Line Clarification.

#37441 from Joe Aquilante · Rule change · TB 25-01 (2025-01 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Spec Corvette, change as follows:
Weight: "SC-3200, SC+-3300* See Notes Section"
Notes: "Cars must comply with all Spec Corvette rules dated 11-28-22 including fuel and tires. No tire treatment or rubber
softeners are permitted. Limited to 380 HP. Nankang NS-2R Tires conforming to Spec Corvette rules or a 295 R compound DOT
tire. Cars must conform to Spec Corvette rules dated 11/2022. Master cylinder part number GM 19418187 and Booster part
number 19418516 permitted. Limited to 380 HP. Any 200tw 315 tire permitted if used on all 4 corners or a 295 R compound DOT
tire.
Modifications to Radiator Air Shroud to increase radiator cooling efficiency is allowed. Replacement of factory air shroud with

2025-02-01 T2 Mustang Update backdate

#37275 from Scotty B White · Rule change · TB 25-02 (2025-02 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, combine Ford Mustang GT 5.0L (15-17) and Ford Mustang GT 5.0L (2018-) and change as follows:
Delete in its entirety: "Ford Mustang GT 5.0L (15-17)"
"Ford Mustang GT 5.0L (2018-)(15-23)"
Required Restrictor: 58mm flat plate restrictor 2015-17 5.0 Gen 2 63mm FPR, 2018-23 5.0. Gen 3 60mm FPR"
Gear Ratios: "3.66, 2.43, 1.69, 1.32, 1.00, 0.65 or 4.69, 2.98, 2.14, 1.76, 1.52, 1.27, 1.00, 0.85, 0.68, 0.63 or 4.17, 2.34, 1.52, 1.14,
0.87, 0.69"
Notes: "Ford Performance Handling Kit part #M-FR3A-M8, Sway Bars in M-FR3A-M8 kit part #M5490-E or M5490-G, Rear Toe
Bearing part #M-5A460-M, Ford Performance Radiator part #M-8005-M8,Strut Tower Brace part# M-20201-M, Camber Bolts M-

Applies to Ford Mustang on this page: Scotty B White

2025-02-01 T2 BOP Adjustment for 2016 - Camaro SS/1LE

#37434 from Kurt Rezzetano · Rule change · TB 25-02 (2025-02 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Chevrolet Camaro, 1LE (2016-), change as follows:
"Chevrolet Camaro, 1LE (20 16-25)"
Required Restrictor: "58mm 62mm FPR"
Min Weight: "3500 3600"

2025-02-01 T2 BMW M235iR TCS CHANGE REQUEST

#37470 from Werner Kordas · Rule change · TB 25-02 (2025-02 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, BMW M235iR (-2016), add to Notes the following:
"Oil cooler and radiator permitted according to touring rules. Silicone charge pipe permitted."

2025-02-01 T4 Ford Mustang V6 (05-14)

#37516 from Touring Committee · Rule change · TB 25-02 (2025-02 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Ford Mustang V6 (05-14), change as follows:
Final drive: "3.45"
Notes: "GT/CS front bumper cover #AR3Z-17D957-BA, allowed if used with front fascia."

2025-02-01 T2 Request to Classify Club Spec in Appropriate Touring Classes

#37523 from Andrew Benagh · Rule change · TB 25-02 (2025-02 Fastrack)

Summary

As printed in Fastrack

In T3 Spec Lines, classify Ford SCCA Club Spec Mustang (CSM) as follows:

A specification table follows in the original; it is not shown here.

Applies to Mazda MX-5 on this page: Oscar Jackson

2025-02-01 T4 Request to Classify Club Spec in Appropriate Touring Classes

#37523 from Andrew Benagh · Rule change · TB 25-02 (2025-02 Fastrack)

Summary

As printed in Fastrack

In T3 Spec Lines, classify Ford SCCA Club Spec Mustang (CSM) as follows:

A specification table follows in the original; it is not shown here.

Applies to Mazda MX-5 on this page: Oscar Jackson

2025-03-01 T2 T2 BOP

#37312 from Touring Committee · Rule change · TB 25-01 (2025-01 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, BMW M2 CS Cup 2020-, change Notes as follows:
"Effective 3/1/2025 It is mandatory to run the “Purple” power stick part #8324089"Red" power stick part #8324085."
In T2 Spec Lines, Chevrolet Corvette C-5 Incl. Fxd Cpe (98-04) Z06 (hardtop) (01-04), change Required Restrictor as follows:
"Effective 3/1/2025 59mm 58mm"

Applies to Chevrolet Corvette on this page: Josh Carroll, David Holmes, Patrick Howe, Evan Gold, Greg Nester, Michael Cheney, Luis Martinez

2025-04-01 T2 Please class the Darkhorse R in T2

#37295 from Touring Committee · Rule change · TB 25-04 (2025-04 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, classify the Ford Mustang Challenge Darkehorse R.

A specification table follows in the original; it is not shown here.

2025-04-01 T2 T2 350Z Spec Line Cleanup

#37603 from Ben Slechta · Rule change · TB 25-04 (2025-04 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Nissan 350Z Track/ Touring/ Standard/ Nismo Spec Z (03-08), change Notes as follows:
"Nissan Motorsports: Shock Front left P/N E6110-SZ350 & Front right E6111-SZ350 & rear E6210-SZ350, Springs front P/N
54010-SZ350 & rear 55020-SZ350, F&R 5600S-SZ350, Front roll bar #54611-SZ350, Rear roll bar #562300-SZ350, Bushings P/N
(54541, 54560, 55045, 55148, 55149, 55152, 55153, 55158, 56218) - RRZ30 allowed. Nismo flywheel permitted. SPC Control
Arms 72125 and 72123 are allowed. Aftermarket flywheel permitted at minimum 14lbs. Aftermarket headers permitted, cold air
intake permitted. Aftermarket big brake kit 4 piston front permitted up to 355x32 SPL pro V3 front upper camber caster control
arms for the 350z part# SPLFUAZ33 permitted. SPL rear toe links part# SPL RTA Z33 permitted. Stillen part #400338 permitted.
44011-RC350 rear caliper kit permitted, 43206-SZ350 Right rotor permitted, 43207-SZ350 Left rotor permitted. Must conform to

2025-05-01 T2 C6 T-2 Corvette 6 Liter Engine Restrictor

#37490 from Joe Aquilante · Rule change · TB 25-05 (2025-05 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Chevrolet Corvette C6 Coupe / Grand Sport (05-13), Required Restrictor, change as follows:
LS2: "63mm 67mm FPR"

2025-05-01 T2 370Z Mid link Replacement for True Coil Overs and OEM Wheel Size

#38014 from Zachary Hayward · Rule change · TB 25-05 (2025-05 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Nissan 370Z (09-17) / 370Z NISMO Edition (09-17), change as follows:
Max Wheel Size: "19 x 10 10.5"
Notes: "5300S-SS370 T-2 spring kit allowed; 54600-SS370 Sway Bars allowed 35mm (f). 29mm (r) Sports Package is allowed.
Springs up to 1000 lbs/in front and rear allowed. 54010- SZ350 (F) and 55020-SZ350 (R) allowed. Cold Air Intake allowed.
Performance Alternative Header permitted. Rear spring relocation permitted to allow coil over shocks. SPL suspension kit
permitted that includes: rear camber arms #SPL RLL Z34 or Nismo 551A0-RLLRZ, , SPL rear traction arms #SPL RTR Z34, or Nismo
55110-RTRRZ SPL front camber arms #SPL FUA Z34,or 54525-FUAZ4 SPL rear mid link #SPL RML Z34 or Nismo 551B0-RMLZ4. SPL
Part# SPL RTA Z34D or NISMO Part# 551B0-RTARZ permitted. Zspeed and Z1 alternative clutch slave permitted. The following

2025-05-01 T4 Correct Ring and Pinion Ratio to T3, Sorry I Mean T4 3.7 V6 Stang

#38041 from David Mead · Rule change · TB 25-05 (2025-05 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Ford Mustang V6 (05-14), add to Notes the following:
"GT 8.8 rear axle assembly allowed. 3.45 or 3.55 final drive ratio allowed. 7.5 rear axle assembly with 3.45:1 final drive allowed."

2025-05-01 T4 T4 Mustang

#38058 from Scotty B White · Rule change · TB 25-05 (2025-05 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Ford Mustang V6 (05-14), add to Notes as follows:
"OEM style rear deck spoiler similar to Laguna/CS packages permitted.”

2025-05-01 T2 T2 Cadillac tire

#38210 from Touring Committee · Rule change · TB 25-05 (2025-05 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, CT4-V Blackwing (2022-), change Tire Size Max as follows:
“295 315”

2025-06-01 T4 T4 Mustang

#38059 from Scotty B White · Rule change · TB 25-06 (2025-06 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Ford Mustang V6 (05-14), change as follows:
Final Drive: "3.45 or 3.31"
"Weight: "3400 3300"

2025-06-01 T4 SSC tire allowance

#38216 from Benjamin Bunk · Rule change · TB 25-06 (2025-06 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Scion FR-S Solo Spec Coupe (13-16), change Notes as follows:
"Any 200TW 225/45/17 or 215/45/17 DOT tire permitted."
In T4 Spec Lines, Subaru BRZ Solo® Spec Coupe (13-16), change Notes as follows:
"Any 200TW 225/45/17 or 215/45/17 DOT tire permitted."

Applies to Scion FR-S on this page: Tony Kiratsous

2025-07-01 T4 Allow B-Spec cars to run in T4

#38439 from Derrick Ambrose · Rule change · TB 25-07 (2025-07 Fastrack)

Summary

As printed in Fastrack

In GCR, Section 9.1.9.2, Touring car eligibility, change as follows:
"Touring car eligibility: Cars are eligible for the class they are listed with a specification line and with the specific allowances
permitted. In addition T2-T4 cars may race one class up in touring classes above their specification line class as long as they are a
legal T2-T4 car and conform to their specification line allowances as classified. Cars conforming to B-Spec or C-Spec rules are
permitted to compete in Touring 4."

2025-08-01 T2 Incorrect Touring Heading

#38451 from Terry Hanushek · Rule change · TB 25-08 (2025-08 Fastrack)

Summary

As printed in Fastrack

In T2-T4 Spec Lines, change Table Header as follows:
"T2 ET"

2025-08-01 T4 Incorrect Touring Heading

#38451 from Terry Hanushek · Rule change · TB 25-08 (2025-08 Fastrack)

Summary

As printed in Fastrack

In T2-T4 Spec Lines, change Table Header as follows:
"T2 ET"

2025-08-01 T2 Clarifications needed to BMW M2 CS cup line

#38536 from Joe Aquilante · Rule change · TB 25-08 (2025-08 Fastrack)

Summary

As printed in Fastrack

The BMW M2 CS Clubsport is classed in T1, not T2. Please visit the following web address for vehicle details about the car's base
allowances-
https://www.bmwusa.com/motorsport/bmw-m2-
cs.html#:~:text=The%20BMW%20M2%20CS%20Racing%20models%20are%20powered%20by%20a,M2%20CS%20Racing%20Rec
ommended%20Mileage.
In T2 Spec Lines, BMW M2 CS Cup 2020, change as follows:
Model: "BMW M2 CS Cup 2020-2021"
Notes: "DOT approved tires required. All other components must be as homologated from BMW Motorsports. No other changes

2025-08-01 T2 Fix brake allowance supersessions.

#38554 from Touring Committee · Rule change · TB 25-08 (2025-08 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, change Brakes as follows:
Chevrolet Corvette C-5 Incl. Fxd Cpe (98-04) Z06 (hardtop) (01-04): "(F) 325 Vented Disc (R) 305 Vented Disc May use two piece
steel rotors with aluminum hats up to 5% larger than 340/330; Any four piston calipers and brackets are permitted. Any brake
caliper pistons are allowed; may use the Wilwood SL6R brake caliper. Stock calipers and rotors only (F) 325 (R) 305"
Chevrolet Corvette C6 Coupe / Grand Sport (05-13): "(F) 325 / 340 Vented Disc (R) 305 / 330 Vented Disc or (F) 355 x 32 Vented
Disc (R) 340 x 26 Vented Disc or May use 2-pc steel rotors with alum. hats up to 5% larger than Z51 rotor. LS2 may use Grand
Sport brake package. Any brake caliper pistons allowed. May use any four piston brake caliper and brackets. Z06 brake calipers
allowed."

2025-08-01 T2 C5 Corvette correction

#38782 from Touring Committee · Rule change · TB 25-08 (2025-08 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Chevrolet Corvette C-5 Incl. Fxd Cpe (98-04) Z06 (hardtop) (01-04), change Restrictor Required as follows:
"LS1: 59 58mm FPR,
LS2: 63mm FPR,
LS3: 56mm FPR,
LS6: 58mm FPR"

Applies to Chevrolet Corvette on this page: Josh Carroll, David Holmes, Patrick Howe, Evan Gold, Greg Nester, Michael Cheney, Luis Martinez

2025-11-01 T4 02-06 Mini Cooper Gear Ratios

#38966 from Trenton Kramer · Rule change · TB 25-11 (2025-11 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mini Cooper S R53 (02-06), change Gear Ratios as follows:
"12.79, 7.79, 5.65, 4.62, 3.83, 3.13 or overall- 11.42, 7.18, 5.39, 4.40, 3.65, 2.96"

2025-11-01 T4 Reinstatement of the 2005-2010 Cobalt into T4

#38987 from Tim Little · Rule change · TB 25-11 (2025-11 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, classify Chevrolet Cobalt SS, Sport Coupe (06-10) as follows:

A specification table follows in the original; it is not shown here.

2025-11-01 T4 Request to Classify Mercedes C230K

#39080 from Patrick Morgan · Rule change · TB 25-11 (2025-11 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, classify Mercedes C230 Kompressor (2002-2005) as follows:

A specification table follows in the original; it is not shown here.

2025-11-01 T2 ND Gearset Request for T4

#39166 from Josh Smith · Rule change · TB 25-11 (2025-11 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-24), add to Notes the following:
"Gear kit Kit PT#- 0000-02-6100."
In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), add to Notes the following:
"Gear kit Kit PT#- 0000-02-6100."
In T3 Spec Lines, Mazda MX-5 Miata (16-18), add to Notes the following:
"Gear kit Kit PT#- 0000-02-6100."
In T3 Spec Lines, Mazda MX-5 Global Cup Miata (2016-2021) ND1, ND, add to Notes the following:
"Gear kit Kit PT#- 0000-02-6100."

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2025-11-01 T4 ND Gearset Request for T4

#39166 from Josh Smith · Rule change · TB 25-11 (2025-11 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-24), add to Notes the following:
"Gear kit Kit PT#- 0000-02-6100."
In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), add to Notes the following:
"Gear kit Kit PT#- 0000-02-6100."
In T3 Spec Lines, Mazda MX-5 Miata (16-18), add to Notes the following:
"Gear kit Kit PT#- 0000-02-6100."
In T3 Spec Lines, Mazda MX-5 Global Cup Miata (2016-2021) ND1, ND, add to Notes the following:
"Gear kit Kit PT#- 0000-02-6100."

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2025-11-01 T4 E&O wheel size on ND

#39168 from Josh Smith · Rule change · TB 25-11 (2025-11 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), change Wheel Size (in.) as follows:
"17 x 7.5"

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2025-11-01 T2 ND Spec Lines Wrong PT#'s

#39170 from Josh Smith · Rule change · TB 25-11 (2025-11 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-24), change Notes as follows:
"Factory bolt-in roll bar/ cross member may be removed to facilitate roll cage installation. The following item(s) must remain
stock: transmission differential unless specified below. Retractable hardtop option permitted but must be disabled from moving
action and positively fastened. Any OEM or aftermarket hardtop is permitted that retains the OEM roof silhouette, including
Mazda hardtop part #0000-07-5902-ND and part #0000-07-5901 (discontinued DG Motorsports). 29mm (f) 16mm (r) sway bars
allowed. 3rd and 4th gear may be replaced with the following parts- (0000-02-5803-02, 0000-02-5803-01, 0000-02-5804-02,
0000-02-5804-01). Suspension package permitted with a 100 lbs. weight increase that includes the following parts: front springs
#0000-04-9700-08, springs up to 500lb front and 300lb rear allowed. Mazda tower brace 0000-04-5626 allowed. Mazda header

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2025-11-01 T4 ND Spec Lines Wrong PT#'s

#39170 from Josh Smith · Rule change · TB 25-11 (2025-11 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-24), change Notes as follows:
"Factory bolt-in roll bar/ cross member may be removed to facilitate roll cage installation. The following item(s) must remain
stock: transmission differential unless specified below. Retractable hardtop option permitted but must be disabled from moving
action and positively fastened. Any OEM or aftermarket hardtop is permitted that retains the OEM roof silhouette, including
Mazda hardtop part #0000-07-5902-ND and part #0000-07-5901 (discontinued DG Motorsports). 29mm (f) 16mm (r) sway bars
allowed. 3rd and 4th gear may be replaced with the following parts- (0000-02-5803-02, 0000-02-5803-01, 0000-02-5804-02,
0000-02-5804-01). Suspension package permitted with a 100 lbs. weight increase that includes the following parts: front springs
#0000-04-9700-08, springs up to 500lb front and 300lb rear allowed. Mazda tower brace 0000-04-5626 allowed. Mazda header

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2025-11-01 T4 Touring 4 Post-Runoffs BOP Adjustments and Changes

#39251 from Touring Committee · Rule change · TB 25-11 (2025-11 Fastrack)

In T4 Spec Lines, Acura RSX/ RSX Type-S (02-06), change Restrictor as follows:
"55mm FPR"
In T4 Spec Lines, Acura TSX (2004-2008), change Restrictor as follows:
"47mm FPR 52mm FPR"
In T4 Spec Lines, BMW Z4 2.5L (03-05) , change Weight as follows:
"3050 2950"
In T4 Spec, BMW 320i (14-15), remove this spec line in its entirety.
In T4 Spec Lines, BMW 323 (98-00), change as follows:

Applies to Mazda MX-5 on this page: Oscar Jackson

2025-11-01 T2 Touring 2 Post-Runoffs BOP Adjustments and Changes

#39274 from Touring Committee · Rule change · TB 25-11 (2025-11 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Spec Corvette, change as follows:
Weight: "SC3200 SC+- 3300 See notes section"
Notes: "The following “Spec Corvette +” allowances are permitted with a base weight of 3300 lbs:"
In T2 Spec Lines, Ford Mustang GT 5.0L (11-14), change Restrictor as follows:
"60mm 62mm flat plate restrictor"
In T2 Spec Lines, Ford Mustang GT 5.0L (2015-23), change Tire Size as follows:
"295 315"
In T2 Spec Lines, Porsche 911 / 996 (98-05), change Weight as follows:

Applies to Ford Mustang on this page: Scotty B White

2025-11-01 T2 Adjust rev limit on Spec Corvette in T2

#39282 from Touring Committee · Rule change · TB 25-11 (2025-11 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Spec Corvette, add to Notes the following:
"7) up to 7100 rpm Rev limit."

2025-12-01 T2 Help the 2011-2014 s197Mustang GT and Boss302 Less Restriction

#38523 from Joe Aquilante · Rule change · TB 25-12 (2025-12 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Ford Mustang Boss 302 (12-13), change Restrictor as follows:
"56mm 63mm flat plate restrictor"
In T2 Spec Lines, Ford Mustang GT 5.0L (11-14), change Restrictor as follows:
"60mm 65mm flat plate restrictor"

Applies to Ford Mustang on this page: Scotty B White

2025-12-01 T2 Improving Competitiveness of Gen 5 Camaro SS

#39021 from Van Hunter · Rule change · TB 25-12 (2025-12 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Chevrolet Camaro SS/1LE (10-15), change Weight as follows:
"3625 3575"

2025-12-01 T4 Classing 1995-99 Dodge Neon SOHC

#39285 from Preston Obremski · Rule change · TB 25-12 (2025-12 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, classify Dodge/Plymouth Neon ACR SOHC/DOHC (2/4 door) (95-99) as follows:

A specification table follows in the original; it is not shown here.

2025-12-01 T2 Adjust T2 Darkhorse R

#39346 from Andrew Aquilante · Rule change · TB 25-12 (2025-12 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Ford Mustang Challenge, change as follows:
Car: "Ford Mustang Challenge Darkehorse/Cup Dark Horse R (2024-)
Displacement: "92.220 x 92.7 / 4957 93.0mm x 92.7mm 5038cc"
Weight: "3650 3775 3825"
Restrictor: "2 x 55 mm"
Tires: "295 315"
Notes: "Safety and camera equipment is unrestricted."
"**This car spec line is not eligible for the Runoffs until it has competed in 3 Super Tour events.**

Applies to Ford Mustang on this page: Scotty B White

2026-01-01 T2 Alternate Placement of Fuse Panel and Electronics Request

#39370 from Aaron Stehly · Rule change · TB 26-01 (2026-01 Fastrack)

Summary

As printed in Fastrack

In GCR, Section 9.1.9.2.D.9.d, add the following:
"8. Under-dash electronics including computers, modules and fuse boxes may be relocated so they can be easily accessed after
roll cage installation."

2026-01-01 T4 Alternate Placement of Fuse Panel and Electronics Request

#39370 from Aaron Stehly · Rule change · TB 26-01 (2026-01 Fastrack)

Summary

As printed in Fastrack

In GCR, Section 9.1.9.2.D.9.d, add the following:
"8. Under-dash electronics including computers, modules and fuse boxes may be relocated so they can be easily accessed after
roll cage installation."

2026-01-01 T2 Rebalance Blackwing Cadillac T2 for 2026

#39426 from John Heinricy · Rule change · TB 26-01 (2026-01 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Cadillac CT4-V Blackwing (2022-), change Weight as follows:
"3800 3750"

2026-01-01 T2 C6 LS2 Corvette Parity Request

#39472 from Brian LaCroix · Rule change · TB 26-01 (2026-01 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Chevrolet Corvette C6 Coupe / Grand Sport (05-13), change Restrictor as follows:
"LS2: 67mm 80mm FPR LS3: 56mm FPR"

2026-01-01 T2 T2 Tire Sizing

#39490 from Scotty B White · Rule change · TB 26-01 (2026-01 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Dodge Viper SRT10 incl. coupe (03-06), change Weight as follows:
"3675 3650"

2026-01-01 T2 Rear Spoiler for Mustang GT S550 (15-23)

#39499 from Andrew Aquilante · Rule change · TB 26-01 (2026-01 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, Ford Mustang GT 5.0L (2015-2023), add to Notes the following:
"Ford Track/Performance Package parts permitted. Performance pack aero parts #M-16600-FP and #M-16601-MPP permitted."

Applies to Ford Mustang on this page: Scotty B White

2026-01-01 T2 Clarify T4 Brake Rotor Allowance

#39503 from David Mead · Rule change · TB 26-01 (2026-01 Fastrack)

Summary

As printed in Fastrack

In GCR, Section 9.1.9.2.D.6.a.6., change as follows:
"In T2-Performance alternative rotors, including 2 piece rotors are permitted. Rotors must be within 5% of OE diameter or a
maximum diameter of 360mm.
In T3- Performance alternative rotors, including 2 piece rotors are permitted with a maximum diameter of 360mm.
T4- Performance alternative 1-piece rotors are permitted but rotors must meet the sizes listed in the spec line. Spec lines
showing alternate brake kits are also permitted to use 1-piece performance alternative rotors of the same size."

2026-01-01 T4 Clarify T4 Brake Rotor Allowance

#39503 from David Mead · Rule change · TB 26-01 (2026-01 Fastrack)

Summary

As printed in Fastrack

In GCR, Section 9.1.9.2.D.6.a.6., change as follows:
"In T2-Performance alternative rotors, including 2 piece rotors are permitted. Rotors must be within 5% of OE diameter or a
maximum diameter of 360mm.
In T3- Performance alternative rotors, including 2 piece rotors are permitted with a maximum diameter of 360mm.
T4- Performance alternative 1-piece rotors are permitted but rotors must meet the sizes listed in the spec line. Spec lines
showing alternate brake kits are also permitted to use 1-piece performance alternative rotors of the same size."

2026-02-01 T2 Request to Add 2014-2017 435i to T2

#38991 from Jimmy Cabrera · Rule change · TB 26-02 (2026-02 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, classify as follows BMW 435I (2014-2017):

A specification table follows in the original; it is not shown here.

2026-02-01 T4 T4 and T3 Feedback

#39230 from Tim Myers · Rule change · TB 26-02 (2026-02 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, remove Ford Mustang V6 (05-14) in its entirety.

2026-02-01 T2 Consideration for Nissan Z & NISMO Z to Touring 2 Class

#39296 from Greg Nelson · Rule change · TB 26-02 (2026-02 Fastrack)

Summary

As printed in Fastrack

In T2 Spec Lines, classify Nissan Z incl. Nismo as follows:

A specification table follows in the original; it is not shown here.

2026-02-01 T4 T4 Mustang 4.0

#39489 from Scotty B White · Rule change · TB 26-02 (2026-02 Fastrack)

Summary

As printed in Fastrack

In T4 Spec Lines, Ford Mustang V6 (05-10), change as follows:
Tire: "245 255"
Notes: "ABS (option code 552) allowed. FR3 Handling Pack #M-2007-FR3V6 allowed (kit does not need to be run in its entirety).
The kit includes: Dampers M-18000-A, Lowering Springs M-5300-N, Sway Bars M- 5490-C, Strut Tower Brace M-20201-F. Ford
Positraction LSD part #M-4204-C75 is allowed. Any springs max F: 500 and R: 400 permitted. Any sway bar up to F: 35mm and R:
28mm permitted. Aftermarket Shocks conforming to T4 rules allowed. Panhard bar, part # BAR-M-4264-A permitted, or any pan
hard bar permitted must be set at same length as a stock bar, center mounting hole to center mounting hole +/- 0.25 inch. An
alternative steel drive shaft is permitted; this drive shaft is otherwise unrestricted, but no modifications to other components

2026-02-01 T2 Allow Alt Bushing Material in Toe Links

#39607 from David Mead · Rule change · TB 26-02 (2026-02 Fastrack)

Summary

As printed in Fastrack

In GCR, Section 9.1.9.D.5.a.1., change as follows:
"T2-T4: A maximum of 3.5 degrees of negative camber is allowed on front and rear suspensions. Spec line part(s) may not be
modified to increase caster and camber. Strut suspensions may adjust camber and caster by the use of eccentric bushings,
eccentric bolts (crash bolts) at the strut-to-spindle, and/or by use of slotted adjustment plates at the top of the strut mounting
plate. If upper strut slotted adjustment plates are used, they shall be located on existing chassis structure, utilizing the
unmodified manufacturer’s original bolt holes and may not serve as reinforcement for that structure. Slotted adjustment plates
(strut camber plates) may incorporate a single spherical bearing (spherical bushing) and a ball thrust bearing per strut tower. On
other forms of suspension, camber and caster adjustment may be achieved by the use of shims and/or eccentric

2026-02-01 T4 Allow Alt Bushing Material in Toe Links

#39607 from David Mead · Rule change · TB 26-02 (2026-02 Fastrack)

Summary

As printed in Fastrack

In GCR, Section 9.1.9.D.5.a.1., change as follows:
"T2-T4: A maximum of 3.5 degrees of negative camber is allowed on front and rear suspensions. Spec line part(s) may not be
modified to increase caster and camber. Strut suspensions may adjust camber and caster by the use of eccentric bushings,
eccentric bolts (crash bolts) at the strut-to-spindle, and/or by use of slotted adjustment plates at the top of the strut mounting
plate. If upper strut slotted adjustment plates are used, they shall be located on existing chassis structure, utilizing the
unmodified manufacturer’s original bolt holes and may not serve as reinforcement for that structure. Slotted adjustment plates
(strut camber plates) may incorporate a single spherical bearing (spherical bushing) and a ball thrust bearing per strut tower. On
other forms of suspension, camber and caster adjustment may be achieved by the use of shims and/or eccentric

2026-02-01 T2 Request for Classification of MG6 TCR in T2-TCR Class

#39702 from Vito Jin · Rule change · TB 26-02 (2026-02 Fastrack)

Summary

As printed in Fastrack

In T2-TCR Spec Lines, classify Link & Co 03 TCR (2019-2025) and MG6 TCR (2019-2022) as follows:
T2-TCR Transmission Power Level Weight(lbs) Notes
Link & Co 03
TCR (2019-
2025)
SEQ 90% 3000 DOT approved tires with maximum section width
of 275. T2-TCR splitter and valance must comply
with 9.1.4.D.3.f. T2-TCR chassis ride height must