Request for Half Shafts - 2014 Camaro SS 1LE
#27584 from William Moore · Rule change · TB 20-01 (2020-01 Fastrack)
In T2, Chevrolet Camaro SS/1LE (10-14), add to Notes as follows:
"1LE-SS Track Pack permitted. Tower Brace 2275 → 6880, oil-air separator 1265 → 3074, 75mm flat plate
restrictor required. Springs up to 1200#/in front and rear permitted. Hotchkis swaybars #22109, TPR
rear upper shock mount #22122, Pfadt lower control arm reinforcement # 1410135, ARE Dry Sump #
LS3-3Y, Petersen # 8009W, Aviad # 009-92200, ATI # 917239, DSS # GNCA10-A, Turn One #T40RBZ28P,
ZL1 front brake kit #22959672. GM Suspension Part # 2346 → 4729 and GM Aero Part #’s 2348 → 9551 &
2320 → 0132 are allowed. ANZE Suspension Rear Shock Mount #:MT-Camaro-5-R-Race1 allowed. ACS
201013 Z28 Spoiler #33-4-155 permitted on the 2010-13. Allow Ground Control rear shock mounting
Show 4 more lines
bracket (red bracket P/N SP133C5). Allow Ground Control rear shock mounting bracket (red bracket P/N
SP133C5). Aviad Dry Sump #001-13110 allowed. Belt tensioner part number GM 1256 → 9301 allowed. Any
swaybar up to 35mm front and rear allowed. Lower control arms BMR TCA026 and rear trailing arms
BMR TCA026. Drive Shaft Shop P/N RA-5424 and RA-5425 Allowed."