Request to Readjust the T2 Porsches
#27746 from Joe Aquilante · Rule change · TB 20-01 (2020-01 Fastrack)
In T2, Porsche 911/ 997 (06-08), change Notes effective 3/1/2020 as follows:
"Ducting for coolers is free, provided it doesn’t change size and/or shape of factory body panels. Ducting
of air to rotors is allowed Removal of rotor dust shields is allowed. Tender springs 60-60-25, and spring
holders ZT-1-X002A01 allowed. Springs up to 800#/in front and 1000 #/in rear allowed. Sway bar size
and configuration is free. Spoilers & bumper/ airdams are free provided they do not exceed the max.body width by any amount and/or the max. body length by more than 1”. Rear wings may be no higherthan the roofline. Camber adjustment slots may be elongated. Porsche Motorsport front and rear
control arms allowed."
Show 19 more lines
In T2, Porsche 911 / Carrera S 997.2 (09-12), change Notes effective 3/1/2020 as follows:
"60mm flat plate restrictor required. Restrictor must be placed in the front of the factory engine air
intake manifold opening. The plate must seal the opening so that all air entering passes through the
restrictor. Ducting for coolers is free, provided it doesn’t change size and/or shape of factory body
panels. Ducting of air to rotors is allowed Removal of rotor dust shields is allowed. Tender springs 60-60-
25, and spring holders ZT-1-X002A01 allowed. Springs up to 800#/in front and 1000 #/in rear allowed.
Sway bar size and configuration is free. Spoilers & bumper/air dams are free provided they do notexceed the max. body width by any amount and/or the max. body length by more than 1”. Rear wingsmay be no higher than the roofline. Camber adjustment slots may be elongated. Porsche Motorsport
front and rear control arms allowed. PDK transmission permitted at +100lbs. Alternate exhaust manifold
Cargraphicts CARP97DFIFKR allowed."
In T2, Porsche Carrera S (06-08), change Notes:
"60mm flat plate restrictor required. Ducting for coolers is free, provided it doesn’t change size and/or
shape of factory body panels. Ducting of air to rotors is allowed Removal of rotor dust shields is allowed.
Tender springs 60-60-25, and spring holders ZT-1-X002A01 allowed. Springs up to 800#/in front and
1000 #/in rear allowed. Sway bar size and configuration is free. Spoilers & bumper/air dams are freeprovided they do not exceed the max. body width by any amount and/or the max. body length by morethan 1”. Rear wings may be no higher than the roofline. Camber adjustment slots may be elongated.
Porsche Motorsport front and rear control arms allowed."