Request to Reevaluate T2 Spec Line for E92 M3
#28266 from ALI SALIH · Rule change · TB 20-12 (2020-12 Fastrack)
In T2, Spec Lines, BMW E92 M3 (08-14) change weight as follows:
"3525 3475"
In T2, Spec Lines, BMW E92 M3 (08-14) change Notes as follows:
"The following aftermarket brakes are allowed with an additional 75lb penalty: StopTech Brake Kit permitted: 380x35mm 6-
piston caliper Part# 83.160.6D00.XX(F) and 355 x 35mm 4-piston caliper Part #83.160.0047.XX (R). Brembo Brake kit permitted:
Front brake kit #1N2.8505A and rear brake kit #2P2.8033A. Alcon Brake Kit permitted: (F) part #BKF9751ZG70L 6-piston caliper
and (R) 4-piston caliper (R) part #BKR9856B20L. AP Racing: Front Part Number 13.01.10038, Rear Part Number 13.01.10053
permitted. Springs up to 800#/in front and rear allowed. Rear spring may be located on shock. Any front swaybar front 32.2mm
Show 5 more lines
and 25.4 rear allowed. RD Sport F & R sway bar kit part # 1968190110. 80 mm flat plate restrictor required. Restrictor must be
placed in the front of the factory engine air intake manifold opening. The plate must seal the opening so that all air entering
passes through the restrictor. DCT transmission allowed. Rear upright may be reinforced so that the lateral arm is mounted in a
double shear mount. OEM brake ducts may be used in the factory configuration and may serve no other purpose than the
factory intent. AP Racing: Front Part Number 13.01.10038, Rear Part Number 13.01.10053 permitted."