BoP Labbeta

BoP Lab / Rules / Letter #30460

#30460 Classify the 2000-2009 Formula Renault 2.0 / Fran-Am 2000

From Formula/Sports Racing Committee · FX · Rule change

Classify the 2000-2009 Formula Renault 2.0 / Fran-Am 2000

#30460 from Formula/Sports Racing Committee · Rule change · TB 21-05 (2021-05 Fastrack)

TB: In FX, GCR section 9.1.1.J.B, add the following:
"9. 2000-2009 Formula Renault 2.0 / Fran-Am 2000 - Shall comply with notes in Table 1."
In FX Table 1, classify the 2000-2009 Formula Renault 2.0 / Fran-Am 2000 as follows:
butterfly shaft. All intake air shall pass through the required restrictors and
the throttle body or carburetor body. Intake manifold for either
carburetion or injection shall have individual runners connecting one
throttle plate to one rotor, only. No balance tubes or other device shall
connect runners between rotors.

Show 23 more lines

G.
Mazda 13B
Streetport
Rotary n/a n/a
One (1) 2-bbl auto-type carb or throttle body. Intake manifold shall have
individual runners connecting one throttle plate/butterfly to one rotor,
only. No balance tubes or other devices shall connect runners between
rotors.
44mm 1230
H. Mazda 13B
Rotary NA NA Peripheral Port 36mm SIR 1230
I. E.
Ford
Duratec/
Mazda MZR/
Ford Duratec
1615 4 2.0L engine destroked to 1615cc n/a 1175
J. F.
Ford
Duratec/
Mazda MZR/
Ford Duratec
2296 4 Maximum compression permitted 14.0:1 30mm SIR 1375

A specification table follows in the original; it is not shown here.