T4 mustang
#32789 from Scotty B White · Rule change · TB 22-12 (2022-12 Fastrack)
In T4 Spec Lines, Ford Mustang V6(05-10), change as follows:
Wheel size: "18x8 9"
Brakes: "(F) 292 314 Vented Disc (R) 299.8 Vented Disc"
Weight: "3300 3275"
Notes: "ABS (option code 552) allowed. FR3 Handling Pack #M-2007-FR3V6 allowed (kit does not need to be run in its entirety).
The kit includes: Dampers M-18000-A, Lowering Springs M-5300-N, Sway Bars M- 5490-C, Strut Tower Brace M-20201-F. Ford
Positraction LSD part #M-4204-C75 is allowed. Any springs max F: 500 and R: 400 permitted. Any sway bar up to F: 35mm and R:
22mm permitted. Aftermarket Shocks conforming to T4 rules allowed. Panhard bar, part # BAR-M4264-A permitted or any pan
Show 6 more lines
hard bar permitted must be set at same length as a stock bar, center mounting hole to center mounting hole +/- 0.25 inch. An
alternative steel drive shaft is permitted; this drive shaft is otherwise unrestricted, but no modifications to other components
are permitted to facilitate its installation. An Aluminum driveshaft is allowed. Any LSD permitted. Ford brake kit M-2300-D
allowed. Aftermarket header allowed. GT 8.8 rear axle assembly allowed. 3.45 or 3.55 final drive ratio allowed with +25lbpenalty. 7.5 rear axle assembly with 3.45:1 final drive allowed with +25lb penalty. Cold Air Intake allowed. Koni part numbers
8741-1494SPORT (front) and 8241-1240SPORT (rear). Spec clutch #SF661 and flywheel #SF66A permitted."