Shock error
#40176 from Touring Committee · Rule change · TB 26-06 (2026-06 Fastrack)
In GCR, Section 4.1.4.2.D.5.b.2., change as follows:
"The make of shock absorber may be changed. Their number, perch location(s), system of attachment, and attachment points
shall not be altered. Their type (tube vs. lever, etc.) shall not be altered. The interchange of gas and hydraulic shock absorbers is
permitted.
T2-T3: Shocks must be installed in the original mounting locations unless noted in the spec line. Remote reservoirs and multiple
adjusters are permitted. Threaded shock bodies or adjusters may be used. Shocks can serve no purpose other than to damp
motion.
T4 only: Any non-adjustable or single adjustable (knob or screw) shock absorber is allowed. Shocks must be installed in the
Show 2 more lines
original mounting locations. Remote reservoirs are not permitted. Threaded shock bodies or adjusters may be used. Shocks can
serve no purpose other than to damp motion."