BoP Lab / Buttonwillow Raceway Park

EP + SRF3 at Buttonwillow Raceway Park

No mapCal Club 2024

This track has been raced on 2 configurations (The Circuit, 2.57 mi; 2.92 mi). Laps on different configurations are not comparable, so only events on the 2.57 mile layout are shown; switch above to see the others.

One run is left out as not that car's own laps (far quicker than the car managed in any other session and than anyone else in its class all week; usually a swapped transponder): Tom Burt in Cal Club 2025 PM (1:42.300; the car's best in any other session was 1:52.334 and the rest of the class's best all week 1:50.233).

Pos	Car	Driver	Class	#	Lap	Theoretical	Qual	Race	5-lap stint	Consistency	Trap	S1	S2	S3
1	SCCA Ent SRF3	Caleb Shrader	SRF3	99	1:50.233 B-Q2	1:49.967	1:50.233 B-Q2	1:50.825 B-R2	1:51.100 B-R2	+0.469 B-R2	133.6 A-Q2	30.136 B-P	31.672 B-P	48.159 B-P
2	SCCA Ent SRF3	Calvin Harris	SRF3	42	1:50.359 B-Q2	1:50.339	1:50.359 B-Q2	1:51.127 B-R2	1:51.474 B-R2	+0.477 B-R2	112.4 B-Q2	30.212 B-Q2	31.791 B-Q2	48.336 B-Q2
3	SCCA Ent SRF3	John Black	SRF3	17	1:50.578 B-Q2	1:50.265	1:50.578 B-Q2	1:50.980 B-R1	1:51.262 B-R1	+0.649 B-R1	134.8 A-P	30.260 B-Q2	31.841 B-Q1	48.164 B-Q1
4	SCCA Ent SRF3	Todd Harris	SRF3	24	1:50.578 B-Q2	1:50.578	1:50.578 B-Q2	1:51.673 B-R1	1:51.973 B-R2	+0.681 B-R2	110.6 B-R1	30.259 B-Q2	31.845 B-Q2	48.474 B-Q2
5	SCCA Ent SRF3	Taylor Harris	SRF3	12	1:50.673 B-Q2	1:50.589	1:50.673 B-Q2	1:51.241 B-R2	1:51.430 B-R2	+0.243 B-R2	114.1 B-R1	30.347 B-Q2	31.916 B-Q2	48.326 B-Q2
6	SCCA Ent SRF3	Mike Miserendino	SRF3	11	1:50.810 B-Q2	1:50.282	1:50.810 B-Q2	1:51.796 B-R2	1:52.073 B-R2	+0.352 B-R2	135.7 A-Q2	30.282 B-Q2	32.022 B-R1	47.978 A-P
7	SCCA Ent SRF3	Steve Fogg	SRF3	21	1:50.892 B-Q2	1:50.770	1:50.892 B-Q2	1:51.698 B-R1	1:51.962 B-R2	+0.636 B-R2	129.9 A-R1, A-Q2	30.379 B-Q2	32.043 B-Q2	48.348 B-Q2
8	SCCA Ent SRF3	Asad Nikadambaev	SRF3	144	1:50.913 A-Q2	1:50.913	1:50.913 A-Q2	1:52.070 A-R2	1:52.270 A-R2	+0.491 A-R2	136.8 A-Q1	30.477 A-Q2	31.965 A-Q2	48.471 A-Q2
9	SCCA Ent SRF3	TJ Acker	SRF3	62	1:51.005 B-Q2	1:50.844	1:51.005 B-Q2	1:51.755 B-R2	1:52.016 B-R1	+0.510 B-R1	110.3 B-Q1	30.314 B-Q2	32.118 B-Q2	48.412 B-Q2
10	SCCA Ent SRF3	Robert Edmison	SRF3	22	1:51.118 B-P	1:50.565	1:51.136 B-Q2	1:51.601 B-R2	1:52.033 B-R2	+1.171 B-R2	136.5 A-P	30.175 B-Q1	31.846 B-Q1	48.544 B-Q1
11	SCCA Ent SRF3	EJ Abed	SRF3	27	1:51.304 B-Q2	1:51.214	1:51.304 B-Q2	1:52.103 B-R2	1:52.228 B-R2	+0.387 B-R2	136.8 A-Q1	30.360 B-Q2	32.113 B-Q2	48.741 B-Q2
12	SCCA Ent SRF3	Sean O'Boyle	SRF3	67	1:51.453 B-P	1:51.248	1:51.799 B-Q2	1:52.231 B-R2	1:52.285 B-R2	+0.523 B-R2	135.9 A-R2	30.363 B-P	32.200 B-P	48.685 B-P
13	SCCA Ent SRF3	Jon McClintock	SRF3	23	1:51.704 B-Q2	1:51.653	1:51.704 B-Q2	1:52.510 B-R2	1:52.779 B-R2	+0.754 B-R2	134.4 A-R1	30.416 B-Q2	32.353 B-P	48.884 B-Q2
14	SCCA Ent SRF3	Andre Perra	SRF3	77	1:51.816 B-P	1:51.816	1:52.314 B-Q2				111.0 B-Q2	30.534 B-P	32.284 B-P	48.998 B-P
15	SCCA Ent SRF3	Eric Hand	SRF3	76	1:51.935 B-P	1:51.718	1:52.618 B-Q1	1:52.736 B-R2	1:53.362 B-R2	+1.041 B-R2	132.2 A-Q2	30.479 B-Q2	32.325 B-P	48.914 B-P
16	Mazda Miata	Joe Carr	EP	12	1:52.034 B-P	1:52.034	1:59.603 A-Q1	1:59.157 A-R1	1:59.373 A-R1	+0.724 A-R1	131.6 A-R1	31.719 B-P	32.405 B-P	49.966 B-P
17	SCCA Ent SRF3	Paul Marino	SRF3	14	1:52.092 B-P	1:51.882	1:52.338 B-Q1	1:52.816 B-R1	1:53.859 B-R2	+0.588 B-R2	138.9 A-Q2	30.539 B-Q1	32.391 B-P	48.952 B-Q1
18	SCCA Ent SRF3	Michael Neumeyer	SRF3	9	1:52.163 A-Q2	1:52.058	1:52.163 A-Q2	1:53.546 A-R1	1:53.921 A-R2	+0.745 A-R2	133.4 A-Q1, A-Q2	30.713 A-Q2	32.218 A-Q2	49.127 A-Q1
19	SCCA Ent SRF3	Graham Woodd	SRF3	52	1:52.194 B-Q2	1:51.959	1:52.194 B-Q2	1:52.959 B-R2	1:53.231 B-R2	+0.687 B-R2	112.4 B-Q1	30.631 B-Q2	32.483 B-Q1	48.845 B-Q2
20	SCCA Ent SRF3	Mark Ballengee	SRF3	197	1:52.334 B-Q2	1:51.955	1:52.334 B-Q2	1:52.715 B-R1	1:53.509 B-R1	+1.364 B-R1	137.8 A-Q1	30.821 B-R1	32.309 B-R1	48.825 B-Q2
21	SCCA Ent SRF3	Tom Burt	SRF3	45	1:52.334 B-Q2	sector data unreliable	1:52.334 B-Q2	1:52.708 B-R1	1:53.274 B-R2	+0.810 B-R2	136.6 A-Q1	30.694	32.318	44.841
22	SCCA Ent SRF3	Umberto Milletti	SRF3	34	1:52.385 B-Q1	1:51.777	1:52.385 B-Q1	1:52.925 B-R1	1:53.355 B-R2	+0.505 B-R2	136.1 A-R2	30.406 B-Q1	32.405 A-Q2	48.966 B-R1
23	SCCA Ent SRF3	Lee Douglas	SRF3	2	1:52.386 B-P	1:51.976	1:52.580 B-Q1	1:53.371 B-R1	1:54.213 B-R1	+1.557 B-R1	115.4 B-P	30.589 B-P	32.398 B-Q1	48.989 B-Q1
24	SCCA Ent SRF3	Rob Pielsticker	SRF3	33	1:52.435 A-Q2	1:52.394	1:52.435 A-Q2	1:53.632 A-R2	1:53.816 A-R1	+0.453 A-R1	136.8 A-P	30.944 A-Q2	32.477 A-Q2	48.973 A-Q2
25	SCCA Ent SRF3	Paul Goudy	SRF3	127	1:52.763 B-P	1:52.211	1:53.151 B-Q2	1:53.038 B-R2	1:53.595 B-R2	+0.957 B-R2	138.5 A-Q1	30.530 B-P	32.469 B-R2	49.212 B-P
26	SCCA Ent SRF3	Maguire Dickerhoof	SRF3	43	1:52.777 A-Q2	1:52.777	1:52.777 A-Q2	1:53.722 A-R2	1:54.380 A-R2	+1.053 A-R2	137.6 A-Q2	31.056 A-Q2	32.628 A-Q2	49.093 A-Q2
27	SCCA Ent SRF3	Chris Strand	SRF3	49	1:52.795 B-P	1:52.475	1:55.168 B-Q1	1:56.794 B-R2	1:58.272 B-R2	+2.172 B-R2	111.6 B-P	30.631 B-P	32.583 B-P	49.261 B-P
28	SCCA Ent SRF3	Tom Miserendino	SRF3	15	1:52.801 B-P	1:52.302	1:53.154 B-Q2	1:53.280 B-R1	1:53.865 B-R2	+0.398 B-R2	130.1 A-Q1	30.778 B-Q2	32.383 B-P	49.141 B-Q1
29	SCCA Ent SRF3	Vince Balch	SRF3	65	1:53.036 B-Q2	1:53.036	1:53.036 B-Q2	1:54.674 B-R1	1:55.749 B-R1	+1.552 B-R1	133.4 A-Q2	30.700 B-Q2	32.651 B-Q2	49.685 B-Q2
30	Mazda MX-5	Glen McCready	EP	4	1:53.088 B-Q2	1:52.984	1:53.088 B-Q2	1:53.487 B-R2	1:54.617 B-R2	+2.232 B-R2	125.6 B-P	30.761 B-R2	32.765 B-Q1	49.458 B-Q2
31	SCCA Ent SRF3	Jay Rosenthal	SRF3	55	1:53.237 B-Q1	1:52.918	1:53.237 B-Q1	1:53.706 B-R1	1:54.392 B-R2	+0.535 B-R2	136.6 A-Q1	31.035 B-Q1	32.580 B-Q1	49.303 B-Q2
32	SCCA Ent SRF3	Clayton Powers	SRF3	70	1:53.237 B-P	1:52.990	1:53.631 A-Q2	1:54.845 A-R1	1:55.266 A-R1	+0.979 A-R1	134.1 A-Q2	30.988 B-P	32.714 A-Q2	49.288 B-P
33	SCCA Ent SRF3	John Arscott	SRF3	81	1:53.623 B-Q2	1:53.288	1:53.623 B-Q2	1:54.918 B-R2	1:55.509 B-R2	+0.858 B-R2	108.7 B-Q1	30.895 B-Q1	32.634 B-Q2	49.759 B-Q2
34	SCCA Ent SRF3	Michael Moshay	SRF3	16	1:54.242 B-R2	1:53.982	1:54.826 B-Q2	1:54.242 B-R2	1:54.930 B-R2	+1.338 B-R2	129.8 A-Q2	31.118 B-R2	33.024 B-R2	49.840 B-R2
35	SCCA Ent SRF3	Denny Fosdick	SRF3	69	1:54.932 B-P	1:54.830	1:55.479 B-Q1	1:56.082 A-R2	1:57.089 A-R1	+1.298 A-R1	128.4 A-P	31.449 B-P	33.388 A-Q1	49.993 B-P
36	SCCA Ent SRF3	Doug Stewart	SRF3	71	1:55.021 B-P	1:54.732	1:55.878 B-Q1	1:55.200 B-R2	1:55.941 B-R2	+1.304 B-R2	130.4 A-Q1	31.406 B-P	33.145 B-R2	50.181 B-P
37	Mazda RX-7	Kurt Frietzsche	EP	40	1:56.468 B-Q1	1:55.599	1:56.468 B-Q1	1:56.573 B-R1	1:57.721 B-R1	+1.914 B-R1	120.7 A-R2	31.324 B-Q1	34.071 B-R1	50.204 B-R1
38	SCCA Ent SRF3	Don Palla	SRF3	37, 30	1:56.524 B-Q2	1:55.911	1:56.524 B-Q2	1:57.682 A-R2	1:58.063 A-R2	+0.973 A-R2	125.7 A-R2	31.402 B-Q2	33.317 B-Q2	51.192 B-R1
39	SCCA Ent SRF3	David Roth	SRF3	7	1:56.755 A-R2	1:56.607	1:57.730 A-Q2	1:56.755 A-R2	1:57.810 A-R2	+2.186 A-R2	132.7 A-P	32.055 A-Q2	33.685 A-R2	50.867 A-R2
40	Mazda RX-7	Brandon Droese	EP	02	1:56.943 B-Q1	1:56.657	1:56.943 B-Q1	1:58.611 B-R1	1:58.767 B-R1	+0.718 B-R1	94.1 B-Q1, B-R1	31.953 B-R1	33.891 B-Q1	50.813 B-Q1
41	SCCA Ent SRF3	Alice Kutsyy	SRF3	111	1:57.255 B-P	1:57.236	1:59.043 B-Q1	1:59.139 B-R1	2:01.752 B-R1	+6.376 B-R1	104.7 B-R1	32.212 B-P	33.871 B-P	51.153 B-P
42	SCCA Ent SRF3	Gary Knesevitch	SRF3	63	1:57.788 B-R2	1:57.025	1:58.429 B-Q2	1:57.788 B-R2	1:58.928 B-R2	+2.951 B-R2	103.5 B-R1	32.046 B-R2	34.221 B-R1	50.758 B-R2
43	BMW E30	Sean Lovett	EP	37	2:00.712 A-Q2	2:00.625	2:00.712 A-Q2	2:01.864 A-R2	2:02.200 A-R1	+0.528 A-R1	127.6 A-Q2	32.761 A-Q1	34.806 A-Q1	53.058 A-Q2
44	Porsche Boxster	William Robinson	EP	198	2:01.940 A-Q1	2:01.634	2:01.940 A-Q1	2:02.887 A-R1	2:03.347 A-R1	+1.312 A-R1	130.6 A-Q2	32.969 A-Q1	35.257 A-Q1	53.408 A-Q1
45	Mazda MX-5	Whitfield Gregg	EP	17	2:03.660 B-Q2	2:03.314	2:03.660 B-Q2	2:04.085 B-R1	2:05.470 B-R2	+2.529 B-R2	97.7 B-R2	33.862 B-R2	35.422 B-R1	54.030 B-Q2

One row per driver and car (a driver who changed cars has a row for each). Each cell is that driver's best in that car across the selected events, with the session it was set in. Best 5-lap stint is the mean of the driver's quickest five consecutive race laps, and consistency is how far their median race lap sat behind their best in that race (small is a driver who does it every lap); both come from the race with the best stint. The fastest in each column is purple, and a car whose best lap is more than 115% of the fastest in its class is greyed (marked ">115%" beside the driver) and left out of the colour scale. Click a column to sort, a row to highlight it. Theoretical lap is the sum of the best sectors, whichever laps they came from, and never slower than the best lap (where a car's fastest laps were recorded without sector times, its best lap is used). The 115% mark is about the car's best lap only: a car whose best lap is within 115% of the fastest in its class is never marked. Greyed sectors with no theoretical lap mean the sector times on file do not add up to a believable lap. Letters refer to the events above; Q is qualifying, R a race.

Sectors

S1 SF → IM1 0.65 mi
S2 IM1 → IM2 0.75 mi
S3 IM2 → SF 1.17 mi
Spd In → Out 0.03 mi

Sectors are numbered in lap order from start/finish, whatever each event's timing called them; the loop names are SCCA timing's.

By car

Car	Class	Drivers	Lap	Qual	Race	Trap	S1	S2	S3
SCCA Ent SRF3	SRF3	38	1:50.233Caleb Shrader	1:50.233Caleb Shrader	1:50.825Caleb Shrader	138.9Paul Marino	30.136Caleb Shrader	31.672Caleb Shrader	44.841Tom Burt
Mazda Miata	EP	1	1:52.034Joe Carr	1:59.603Joe Carr	1:59.157Joe Carr	131.6Joe Carr	31.719Joe Carr	32.405Joe Carr	49.966Joe Carr
Mazda MX-5	EP	2	1:53.088Glen McCready	1:53.088Glen McCready	1:53.487Glen McCready	125.6Glen McCready	30.761Glen McCready	32.765Glen McCready	49.458Glen McCready
Mazda RX-7	EP	2	1:56.468Kurt Frietzsche	1:56.468Kurt Frietzsche	1:56.573Kurt Frietzsche	120.7Kurt Frietzsche	31.324Kurt Frietzsche	33.891Brandon Droese	50.204Kurt Frietzsche
BMW E30	EP	1	2:00.712Sean Lovett	2:00.712Sean Lovett	2:01.864Sean Lovett	127.6Sean Lovett	32.761Sean Lovett	34.806Sean Lovett	53.058Sean Lovett
Porsche Boxster	EP	1	2:01.940William Robinson	2:01.940William Robinson	2:02.887William Robinson	130.6William Robinson	32.969William Robinson	35.257William Robinson	53.408William Robinson

The best any driver of each car managed across the selected events, with who set it. Spellings and model years of the same car are grouped; click a row marked ▸ to see each version. Grouping is worked out from the names, so tell us if two cars are wrongly merged or split.

Rule changes between these events

Cal Club 2024 → Cal Club 2025 2024-02-23 to 2025-02-22

2024-03-01 EP GCR Correction - Redundant HP Spec Lines

#35623 from Production Committee · Rule change · TB 24-03 (2024-03 Fastrack)

neutralHP removes four redundant VW spec lines: Rabbit Cabriolet 1780, Scirocco 1588, Scirocco 1780 8-valve, Scirocco 1588.

In HP Spec Lines, delete the following redundant spec lines in their entirety:
Spec line #10 - VW Rabbit Cabriolet 1780
Spec line #3 - VW Scirocco 1588
Spec line #4 - VW Scirocco 1780 (8-valve) (83-88)
Spec line #5 - VW Scirocco 1588

2024-06-01 EP NIssan 300ZX Z31 to EP

#35830 from Murphy Nichols · Rule change · TB 24-06 (2024-06 Fastrack)

neutralNissan 300ZX 84-89 classified to EP at 2550 lbs minimum, 2960cc 6-cyl SOHC, fuel injection, 12.0:1 compression limit, 0.500" valve lift limit.

In EP Spec Lines, classify Nissan 300ZX (84-89), as follows:

A specification table follows in the original; it is not shown here.

2024-06-01 EP RX7 1993 and Up Request In EP Spec Lines, classify

#36031 from Edward Zabinski · Rule change · TB 24-06 (2024-06 Fastrack)

neutralMazda RX-7 92-97 newly classified EP Prep Level 2 at 2200–2310 lbs with 13B 6-port rotary engine.

Mazda RX-7 (92-97) as follows:

A specification table follows in the original; it is not shown here.

2024-06-01 SRF3 SRF3 Alternator Pulley Update In

#36095 from Robey Clark · Rule change · TB 24-06 (2024-06 Fastrack)

fasterSRF3 alternator pulley minimum weight reduced from 12 oz to 11 oz.

SFR3, GCR section 9.1.8.D.2.H.17, change as follows:
"Alternator Pulley: P/N G902130, or P/N G902130A, or P/N G902131 (six row). 12 11 oz minimum weight."

2024-06-01 EP Clean-up Multiple EP RX-8 Spec Lines In EP

#36156 from Production Committee · Rule change · TB 24-06 (2024-06 Fastrack)

neutralEP Mazda RX-8 (04-11) alternate spec line removed; one primary line remains.

Spec Lines, make the following changes to the two Mazda RX-8 spec lines.
Remove spec line entirely:
~~Mazda RX-8 (04-11)~~
Remove the wording "alternate":
Mazda RX-8 (04-11)~~(alternate)~~
Spec Mazda (SM/SMX) None.

2024-08-01 EP Errant entry in HP production line item

#36231 from Angus Crome · Rule change · TB 24-08 (2024-08 Fastrack)

neutralHP Volkswagen Golf and Jetta 85-92 track correction: front 1537mm (60.5in), rear 1529mm (60.2in).

In HP Spec Lines, change Track (F/R)mm/(in.) as follows:
Volkswagen Golf (GTI, GT, GL) (85-92): "2 1537/1529 (60.5/60.2)"
Volkswagen Jetta (GLI, GL) (85-92): "2 1537/1529 (60.5/60.2)"

2024-08-01 SRF3 Update Rain Tire Rule and Hoosier Decal Placement

#36436 from Robey Clark · Rule change · TB 24-08 (2024-08 Fastrack)

slowerSRF wet tires: P185/60R13 H20/W2 option removed; P185/65R13 W2 front now required with P205/60R13 W2 rear.

In SRF, GCR section 9.1.8.D.1.X.f, change as follows:
"Wet:
~~Front – Hoosier P/N 46100 P185/60R13 H20 or W2~~
~~Rear – Hoosier P/N 46105 P205/60R13 H20 or W2~~
~~Ground clearance is 2.5” with driver as raced when P185/60R13 (H20 or W2) tires are used.~~
OR
Front – Hoosier P/N 46101 P185/65R13 W2
Rear – Hoosier P/N 46105 P205/60R13 W2

Show 8 more lines

1. It is forbidden to regroove tires.
2. The use of tire warmers or cooling methods other than natural air convection or conduction is prohibited. The penalty for
violation will be the loss of qualifying times and/or the disqualification of race results.
3. Hoosier SRF/SRF3 Decal Placement:
Four (4) "Hoosier" decals are required in the following locations: Two (2) 11" X 3" decals on the vertical plane of the front nose to
the outside of the cooling opening on each side and two (2) 18" X 5" decals, one on each side of the engine cover or above the
rear wheel openings on the vertical plane. Hoosier decals are available, free of charge, from all Hoosier tire distributors including
SCCA Enterprises."

2024-09-01 SRF3 Update to Letter 36619 with new Hoosier Contingency Decal Info

#36624 from Robey Clark · Rule change · TB 24-09 (2024-09 Fastrack)

neutralSRF Hoosier decal requirement reduced from four decals in specific locations to three decals with simpler placement rules.

In SRF, GCR section 9.1.8.D.1.X.f.3, change as follows:
"~~Four (4) "Hoosier" decals are required in the following locations: Two (2) 11" X 3" decals on the vertical plane of the front nose~~
~~to the outside of the cooling opening on each side and two (2) 18" X 5" decals, one on each side of the engine cover or above the~~
~~rear wheel openings on the vertical plane. Hoosier decals are available, free of charge, from all Hoosier tire distributors including~~
~~SCCA Enterprises~~ Per Hoosier's contingency program, three (3) decals are required to qualify for contingency awards. One (1)
decal must be located on each side of the car and one (1) decal must be visible on the front."

2024-10-01 SRF3 Update SRF3 Air Filter Rule

#36681 from Robey Clark · Rule change · TB 24-10 (2024-10 Fastrack)

unclearSRF3 air filter rule removes K&N RC-9160 option, leaving only P/N WM301020 allowed.

In SRF, GCR section 9.1.8.D.2.H.23, change as follows:
"Air Filter: P/N WM301020 ~~or K&N RC-9160~~"

2024-10-01 SRF3 Update SRF Brake Rotor Thickness

#36687 from Robey Clark · Rule change · TB 24-10 (2024-10 Fastrack)

slowerSRF brake rotor minimum thickness increases from 12.20mm to 13.25mm, Wilwood vented rotor P/N 800065.

In SRF, GCR section 9.1.8.D.1.X.g, change as follows:
"Brakes: Hawk Blue 9012 pads P/N 801993 must be used. Wilwood vented rotor P/N 800065 ~~shall~~ must be used as delivered with
no machining of any kind. Minimum thickness ~~12.20mm (0.481”)~~ 13.25mm (0.522”)."

2024-10-01 SRF3 Hoosier Tire Decal Placement

#36739 from Robey Clark · Rule change · TB 24-10 (2024-10 Fastrack)

neutralSRF3 Hoosier logo placement changes from four decals to three decals in different locations.

In SRF, GCR section 9.1.8.D.2.B, change as follows:
"Mandatory identification: "SRF3" near the side car numbers. "~~Hoosier" logo (4) on both sides front lower outer corners of the~~
~~nose and each side of the tail.~~ Three (3) "Hoosier" logos, one (1) on each side of the car and one (1) on the center front of the car."

2024-11-01 EP 1275 HP Spridget Level 2 Only

#36518 from Darryl Saylor · Rule change · TB 24-09 (2024-09 Fastrack)

fasterHP Sprite and Midget 1275cc and 1098cc Level 2 compression ratio raised to 12.0:1.

In HP Spec Lines, Austin-Healey Sprite MkI, II, III, IV MG Midget (ALL) - Level 2 - 1275cc, change Notes as follows:
"(Effective 11/1/2024) Compression ratio limited to 11 12.0:1"
In HP Spec Lines, Austin-Healey Sprite MkI, II, III, IV MG Midget (ALL) - Level 2 - 1098cc, change Notes as follows:
"(Effective 11/1/2024) Compression ratio limited to 11 12.0:1"

2024-11-01 EP NA Miata Track Width Correction

#36902 from Production Committee · Rule change · TB 24-11 (2024-11 Fastrack)

neutralEP Mazda Miata front and rear track widths increased to 1516/1534 mm (59.7/60.4 in.) across all generations.

In EP Spec Lines, Track (F/R) mm/(in.), change as follows:
Mazda MX-5 /Miata 1.6L (-1993) - ~~"1478/1491 (58.2/58.7)~~ 1516/1534 (59.7/60.4)"
Mazda MX-5 /Miata 1.8L (90-97) - ~~"1483/1509 (58.4/59.4)~~ 1516/1534 (59.7/60.4)"
Mazda MX-5 /Miata (94-97) - "~~1483/1509 (58.4/59.4)~~ 1516/1534 (59.7/60.4)"

2024-12-01 EP Triumph GT6 Adjustments

#37112 from Anthony Parker · Rule change · TB 24-12 (2024-12 Fastrack)

slowerEP Triumph GT6 switches to three Weber 40 DCOE carbs with 28mm chokes, weight rises 50 lbs to 1990.

In EP Spec Lines, make the following changes in the "Triumph GT6" spec line:
Carburetor No. & Type: (2): "~~1.5”~~ 1.75" Auto-type carburetor(s)"
Notes: "~~Two (2) 1.75” auto-type carburetors @ 1940 lbs.~~ Three (3) Weber 40 DCOE on IR manifold with 28mm chokes @ 1990
lbs. Laycock overdrive, May use 5 speed gearbox w/o overdrive."

2025-01-01 EP Request to Reduce Weight of BMW 325i/is E30 (84-91) Spec Line

#37119 from Tim Schreyer · Rule change · TB 25-01 (2025-01 Fastrack)

fasterEP BMW 325i/is E30 (84-91) weight reduced 50–52 lbs across three spec lines to 2150, 2204, 2258.

In EP SPEC LINES, BMW 325i/is (E30) (84-91), change Weight as follows:
"~~2200~~ 2150
*~~2255~~ 2204
**~~2310~~ 2258"

2025-02-21 EP Effective date for Jan 2025 GCR updates

#37654 from Doug Piner · Rule change · TB 25-02 (2025-02 Fastrack)

slowerEP BMW Z3 2.5L requires 52mm flat plate intake restrictor; Z3 2.8L 55mm; 328i/is E36 58mm; 328i/ci E46 58mm; 325i/is E46 56mm; 325i/is E36 56mm; 325is M-Technic 56mm.

In EP Spec Lines, add to Notes as follows:
BMW Z3 2.5LL "(Effective 2/21/2025) 52mm Flat Plate Intake Restrictor is required."
BMW Z3 2.8L (97-00): "(Effective 2/21/2025) 55mm Flat Plate Intake Restrictor is required."
BMW 328i/is E36 (96-99): "(Effective 2/21/2025) 58mm Flat Plate Intake Restrictor is required."
BMW 328i/ci E46 (01-06): "(Effective 2/21/2025) 58mm Flat Plate Intake Restrictor is required."
BMW 325i/is E46 (01-06): "(Effective 2/21/2025) 56mm Flat Plate Intake Restrictor is required."
BMW 325i/is E-36 (92-95): "(Effective 2/21/2025) 56mm Flat Plate Intake Restrictor is required."
BMW 325is M-Technic (1994): "(Effective 2/21/2025) 56mm Flat Plate Intake Restrictor is required."

Cal Club 2025 → Cal Club 2026 2025-02-22 to 2026-02-21

2025-03-01 EP Request Competition Adjustment to BMW Z3 2.5L

#37120 from Tim Schreyer · Rule change · TB 25-01 (2025-01 Fastrack)

slowerEP BMW Z3 and 3-series models get smaller intake restrictors: Z3 2.5L to 52mm, Z3 2.8L to 55mm, 328i to 58mm, 325i to 56mm.

In EP Spec Lines, change Notes as follows:
BMW Z3 2.5LL "(Effective 3/1/2025) ~~56mm~~ 52mm Flat Plate Intake Restrictor is required."
BMW Z3 2.8L (97-00): "(Effective 3/1/2025) ~~59mm~~ 55mm Flat Plate Intake Restrictor is required."
BMW 328i/is E36 (96-99): "(Effective 3/1/2025) ~~62mm~~ 58mm Flat Plate Intake Restrictor is required."
BMW 328i/ci E46 (01-06): "(Effective 3/1/2025) ~~62mm~~ 58mm Flat Plate Intake Restrictor is required."
BMW 325i/is E46 (01-06): "(Effective 3/1/2025) ~~60mm~~ 56mm Flat Plate Intake Restrictor is required."
BMW 325i/is E-36 (92-95): "(Effective 3/1/2025) ~~60mm~~ 56mm Flat Plate Intake Restrictor is required."
BMW 325is M-Technic (1994): "(Effective 3/1/2025) ~~60mm~~ 56mm Flat Plate Intake Restrictor is required."

2025-03-01 EP Interpretation of Production Rules on Mirrors

#37235 from Lawrence Slivinski · Rule change · TB 25-03 (2025-03 Fastrack)

neutralEP, FP, HP: interior or exterior mirrors meeting rule 9.3.36 now permitted.

In GCR, add new rule as Section 9.1.5.E.10.f:
"Any interior or exterior mirror(s) that meets rule 9.3.36 may be used."

2025-03-01 EP Weight Reduction for Honda S2000

#37466 from Michael Unger · Rule change · TB 25-03 (2025-03 Fastrack)

fasterEP Honda S2000 1997cc base loses 75 lbs to 2375; 2157cc base loses 60 lbs to 2450.

In EP, Spec Lines make the following weight changes:

A specification table follows in the original; it is not shown here.

2025-03-01 EP Mazda 1999 Miata 1.8L

#37488 from Joe Carr · Rule change · TB 25-03 (2025-03 Fastrack)

fasterEP Mazda MX-5/Miata 99-05 minimum weight drops to 2100 lbs, 2153 lbs with power adder, 2205 lbs with two adders.

In EP Spec Lines, make the following weight change:
Mazda MX-5 /Miata (99-05):
"~~2150~~ 2100
*~~2204~~ 2153
**~~2258~~ 2205"

2025-04-01 EP Request for Classification of Chevrolet Spark

#37755 from Kristian Smith · Rule change · TB 25-04 (2025-04 Fastrack)

neutralChevrolet Spark 16-22 classified HP Pre at 1850 lbs minimum weight, fuel injected, 1399 cc.

In HP Spec Lines, classify the Chevrolet Spark (16-22):

A specification table follows in the original; it is not shown here.

2025-04-01 EP Request to Lower Ford Festiva Minimum Weight to 1600 LBS

#37939 from Doug DeRonne · Rule change · TB 25-04 (2025-04 Fastrack)

fasterHP Ford Festiva 88-93 minimum weight drops to 1600 lbs, variants to 1640 and 1680 lbs; compression ratio raised to 11.0:1.

In HP Spec Lines "Ford Festiva (88-93)" change as follows:
Weight:
"~~1700~~ 1600
*~~1743~~ 1640
**~~1785~~ 1680"
Notes:
"Compression ratio limited to ~~10.5~~ 11.0:1. Valve lift limited to .450”."

2025-04-01 SRF3 Driver Safety & Comfort

#37966 from Robey Clark · Rule change · TB 25-04 (2025-04 Fastrack)

neutralSRF drivers with disabilities may modify seat and controls for safety and comfort with approval and logbook notation.

In SRF, GCR section 9.1.8.D.1.D, add the following:
"f. Driver Safety and Comfort modifications to seat and controls for drivers with disabilities may be made only by approval. These
modifications must be reported to SCCA Enterprises and noted in the car logbook. The modifications are approved only for the
noted driver with disabilities. If the car is used by or sold to another driver, it must be returned to the previous standard
configuration."

2025-04-01 SRF3 Update SADEV transmission specs

#37992 from Club Racing Board · Rule change · TB 25-04 (2025-04 Fastrack)

neutralSRF SADEV-SRF3 6-speed sequential transmission gear ratios wording clarified, effective 2025-04-01.

In SRF, GCR section 9.1.8.D.2.K, change as follows:
"OR
SADEV-SRF3 6-Speed Sequential ~~(beginning~~ from Oct. 4, 2021 onward):
1st 12-36 3.0000 : 1
2nd 15-31 2.0667 : 1
3rd 18-28 1.5556 : 1
4th 22-28 1.2727 : 1
5th 24-26 1.0833 : 1

Show 2 more lines

6th 25-23 0.9200 : 1
Final Drive Ratio: 15-48 3.20"

2025-06-01 EP Base Weight Adjustment for H-Production X1/9 Spec Lines

#38255 from Matthew Brannon · Rule change · TB 25-06 (2025-06 Fastrack)

fasterHP Fiat X-1/9 base weights reduced 50–53 lbs across 1300 and 1500 spec lines.

In HP Spec Lines, change Weight as follows:
Fiat X-1/9 & Bertone1500: “~~1790~~ 1740 *~~1835~~ 1784 **~~1880~~ 1827”
Fiat X-1/9 1300: “~~1650~~ 1600 *~~1691~~ 1640 **~~1733~~ 1680”
Fiat X-1/9 1300: “~~2060~~ 2010”
Fiat X-1/9 1500: “~~1950~~ 1900”

2025-07-01 EP BMW Z4 update

#38490 from Bryce McGuire · Rule change · TB 25-07 (2025-07 Fastrack)

slowerEP BMW Z4 03-05 restricted to 52mm flat plate intake restrictor.

In EP Spec Lines, BMW Z4 (03-05), add to Notes the following:
“52mm Flat Plate Intake Restrictor.”

2025-07-01 EP EP Fiat 124 Spider Competition Adjustment Request

#38498 from John Baucom · Rule change · TB 25-07 (2025-07 Fastrack)

fasterEP Fiat 124 Spider 1600 & 2000 weight drops 50 lbs to 2000; carburetors gain 2mm chokes to 36mm.

In EP Spec Lines, Fiat 124 Sport Spider 1600 & 124 Spider 2000, change as follows:
Weight: "~~2050~~ 2000"
Carburetor No. & Type: "(2) Weber 40 IDF-40IFI, (2) Solex C40P116, 34 36mm choke(s) req’d, (2) Weber 45DCOE w/ 34 36 mm
choke(s) on I.R. manifold or fuel injection."

2025-09-01 SRF3 SRF Rule Updates

#38853 from Robey Clark · Rule change · TB 25-09 (2025-09 Fastrack)

neutralSRF3 brakes restructured: Hawk Blue 801993 pads, Wilwood 800065 rotors only; adds Girling 880358, Wilwood 880357, Tilton 880360 master cylinders.

Effective 9/1/25 in SRF, GCR section 9.1.8.D.1.V.ff, add the following:
"SRF3 Oil Cooler, P/N G480503 may be used as mounted per the GEN3 Assembly Manual. No fan permitted for SRF. HD Oil
Cooler kit P/N G1148500 may be used as mounted per the GEN3 Conversion Manual."
Effective 9/1/25 in SRF, GCR section 9.1.8.D.X.g, change as follows:
"Brakes: ~~Hawk Blue 9012 pads P/N 801993 must be used. Wilwood vented rotor P/N 800065 must be used as delivered with no~~
~~machining of any kind. Minimum thickness 13.25mm (0.522”). The Renault Alliance solid front rotors may not be used. Rubber~~
~~caliper bushings may be replaced with bronze bushings P/N 1196185 or P/N 1196185. Original caliper pistons may be replaced~~
~~with vented caliper piston P/N 1196184; no other modification allowed. Wilwood caliper with bracket universal fit P/N 800038~~

Show 11 more lines

~~may be used as delivered with no modification of any kind. Wilwood knock back spring (2.63 lbs.) P/N 800045 may be used as~~
~~delivered with no modification of any kind; maximum of one spring per caliper.~~
1. Hawk Blue pads P/N 801993 only
2. Wilwood Vented Rotor P/N 800065 only, as delivered, with no machining of any kind. Minimum thickness 13.25mm (0.522")
3. Wilwood universal caliper Kit P/N 1180008 as delivered, caliper only P/N 800038; Wilwood knock back spring P/N 800045
may be used as delivered, with no machining of any kind, and only one spring per caliper
4. Renault caliper rubber bushings may be replaced with bronze bushings P/N 1196185 or P/N 1196185A
5. Renault caliper piston may be replaced with P/N 1196184 vented piston as delivered, with no machining of any kind
6. Girling .750" Master Cylinder P/N 880358 as delivered, with no machining of any kind
7. Wilwood .750" Master Cylinder P/N 880357 as delivered, with no machining of any kind
8. Tilton .750" Master Cylinder P/N 880360 as delivered, with no machining of any kind"

2025-10-01 SRF3 Add HD Oil Cooler

#38979 from Robey Clark · Rule change · TB 25-10 (2025-10 Fastrack)

neutralSRF3 adds HD Oil Cooler P/N G1148500 as alternative to standard cooler P/N G480503.

In SRF, GCR section 9.1.8.D.1.V.ff, change as follows:
"SRF3 Oil Cooler, P/N G480503 or HD Oil Cooler P/N G1148500 may be used as mounted per the GEN3 Assembly Manual. No fan
permitted for SRF. ~~HD Oil Cooler kit P/N G1148500 may be used as mounted per the GEN3 Conversion Manual.~~"

2025-10-01 EP HP Plymouth Arrow spec omission

#38995 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

neutralHP Plymouth Arrow transmission max speeds clarified to 4 or 5.

In HP Spec Lines, Plymouth Arrow (76-80), add the following wording to Trans. Speeds(max):
"4 or 5"

2025-10-01 EP Add Wheel Diameter to Appendix G

#39008 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

neutralEP, FP, HP wheel diameter added to Appendix G as absolute maximum specification.

In Appendix G.2.3, change as follows:
"Rim width and diameter are is absolute maximums."

2025-10-01 EP Add TB ID tolerance to general Prod rules

#39009 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

neutralEP, FP, HP throttle body inside dimensions must remain stock with +/-.25mm tolerance; butterfly dimensions stock in FP, HP only.

In GCR, Section 9.1.5.E., change as follows:
9.1.5.E.1.b.4: "The inside dimensions of the throttle body casting/housing (as measured at the throttle butterfly) must remain
stock (tolerance of +/-.25mm), but the throttle body can otherwise be ported and polished."
9.1.5.E.2.b.4: "The inside dimensions of the throttle body casting/housing and all dimensions of the throttle butterfly must
remain stock (tolerance of +/-.25mm)."

2025-11-01 EP Please Lower Weight of 280Z

#38871 from Matthew Miller · Rule change · TB 25-09 (2025-09 Fastrack)

fasterEP Nissan 280Z minimum weight reduced from 2560 to 2400 lbs.

In EP Spec Lines, Nissan 280Z, change Weight (lbs) as follows:
"(Effective 11/1/2025) ~~2560~~ 2400
*~~2624~~ 2460
**~~2688~~ 2520"

2025-11-01 EP Miata Weight Adjustment Follow Up

#38949 from Don Tucker · Rule change · TB 25-10 (2025-10 Fastrack)

fasterEP Mazda MX-5 1.8L 90-97 weight reduced to 2125 lbs from 2150 lbs.

In EP Spec Lines, Mazda MX-5 / Miata 1.8L (90-97), Effective 11/1/2025 make the following weight change:
"~~2150~~ 2125"

2025-11-01 EP Weight Break for 1098 Midget / Sprite

#38970 from Kendall Jones · Rule change · TB 25-10 (2025-10 Fastrack)

fasterHP Austin-Healey Sprite/Midget 1098cc minimum weight drops 80 lbs to 1550.

In HP Spec Lines, Austin-Healey Sprite/Midget 1098cc, Effective 11/1/2025make the following weight change:
"~~1630~~ 1550"

2025-11-01 EP HP Volvo 142 spec omission

#38994 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

slowerHP Volvo 142/142E gains compression ratio limit 12.0:1 and valve lift limit .425".

In HP Spec Lines, Volvo 142/142E P-1800 Engine, Effective 11/1/2025 add the following wording to Notes:
"Comp. Ratio limited to 12.0:1. Valve lift limited to .425”."

2025-11-01 EP HP Mini DOHC 1.6

#38996 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

slowerHP Mini Cooper 07-15 valve lift reduced to .390", from .450".

In HP Spec Lines, Mini Cooper (07-13) (includes 09-15 convertible and 12-15 Coupe), Effective 11/1/2025 make the following
changes to the Notes:
"Compression ratio limited to 11.0:1, Valve lift limited to ~~.450”~~.390"."

2025-11-01 EP Add to Rabbit description

#39019 from Production Committee · Rule change · TB 25-11 (2025-11 Fastrack)

neutralFP and HP Volkswagen Rabbit descriptions updated: Convertible changed to Cabriolet in FP; Cabriolet added to three HP engine variants.

In FP Spec Lines, make the following spec line correction:
"Volkswagen Rabbit (Includes ~~Convertible~~ Cabriolet)"
In HP Spec Lines, make the following spec line correction:
"Volkswagen Rabbit 1588 (Includes Cabriolet)"
"Volkswagen Rabbit 1715 (Includes Cabriolet)"
"Volkswagen Rabbit 1780 (Includes Cabriolet)"

2025-11-01 EP Clean-up 9.1.5.E.7e

#39025 from Production Committee · Rule change · TB 25-11 (2025-11 Fastrack)

neutralEP, FP, HP: rear drum brake to disc conversion clarified; rotors solid, diameter limited to largest front rotor permitted.

In GCR, Section 9.1.5.E.7., change as follows:
"e. Cars fitted with rear drum brakes, can convert to rear disc brakes without penalty. N~~ote that the “Brakes Std.” and “Brakes~~
~~Alt.” listings on a vehicle’s spec line do not prohibit a car that was fitted with rear drum brakes stock, from converting to rear~~
~~disc brakes under this rule~~. When converting from rear drum brakes to rear disc brakes:
1. Rear brake rotors must be solid and can be no larger in diameter than the largest permitted front brake rotor, as defined on
the vehicle’s spec line.
2. Rear calipers and mounting brackets are unrestricted but must be made of a ferrous or aluminum material. ~~The standard and~~
~~alternate brake listings on a vehicle’s specification line, does not prohibit a car that was fitted with rear drum brakes as stock~~

Show 3 more lines

~~from converting to rear disc brakes under this rule.~~
3. The “Brakes Std.” and “Brakes Alt.” listings on a vehicle’s spec line do not prohibit a car that was fitted with rear drum brakes
as stock from converting to rear disc brakes under this rule."

2025-11-01 EP Add TB size to Ford Mustang (94-98) Spec Line

#39130 from Production Committee · Rule change · TB 25-11 (2025-11 Fastrack)

neutralEP Ford Mustang (94-98) fuel injected throttle body inside diameter specified at 60.

In EP Spec Lines, Ford Mustang (94-98) add the following to the Fuel Injected Equipped Throttle Body Inside Diameter column:
"60"

2025-12-01 EP TR2 Notes E&O

#39180 from Anthony Parker · Rule change · TB 25-12 (2025-12 Fastrack)

unclearEP Triumph TR2-TR4A allows 5-speed gearbox without overdrive; removes Weber carb and weight specification.

In EP Spec Lines, Triumph TR2, 3, 3A, 4, 4A, TR4, TR4A, IRS, make the following change to the Notes:
"Front apron assembly may be made of alternate material. ~~Three (3) Weber 40 DCOE on IR manifold with 28mm chokes @ 1990~~
~~lbs.~~ Laycock overdrive, may use 5 speed gearbox without overdrive."

2025-12-01 EP Balance of Power

#39187 from Jim Simaras · Rule change · TB 25-12 (2025-12 Fastrack)

slowerEP BMW Z3 2.5L restrictor reduced 52mm to 50mm, weight increased to 2550 lbs base; five other BMW models get smaller restrictors.

In EP Spec Lines, make the following changes to Restrictors:
BMW Z3 2.5L: "~~52mm~~ 50mm Flat Plate Intake Restrictor"
BMW Z3 2.8L (97-00): "~~55mm~~ 53mm Flat Plate Intake Restrictor"
BMW 328i/is E36 (96-99): "~~58mm~~ 55mm Flat Plate Intake Restrictor"
BMW 328i/ci E46 (01-06): "~~58mm~~ 55mm Flat Plate Intake Restrictor"
BMW 325i/is (E46) (01-06): "~~56mm~~ 53mm Flat Plate Intake Restrictor"
BMW 325is M-Technic (1994): "~~56mm~~ 53mm Flat Plate Intake Restrictor"
BMW 325i/is E-36 (92-95): "~~56mm~~ 53mm Flat Plate Intake Restrictor"

Show 4 more lines

In EP Spec Lines, BMW Z3 2.5L, change Weight as follows:
"~~2500~~ 2550
*~~2563~~ 2614
**~~2625~~ 2678"

2026-01-01 EP Request to Update E30 BMW Throttle Body Diameter Verbiage

#39363 from Tim Schreyer · Rule change · TB 26-01 (2026-01 Fastrack)

neutralEP BMW 325i/is E30 throttle body specified as 60mm in fuel injection notes.

In EP Spec Line BMW 325i/is E30 (84-91), change Drivetrain Notes as follows:
"Fuel Injection, TB: 60mm"

What the rules allowed changed as listed; this does not say what any particular car ran.