BoP Labbeta

BoP Lab / Buttonwillow Raceway Park

HP + T1 at Buttonwillow Raceway Park

No mapCal Club 2024

Track map: sectors and speed trap

Track map with timing sectors and speed trap
Shown for: Cal Club 2026 (practice, qualifying, race) · Cal Club 2025 (practice, qualifying, race)
Class · click a class to switch, + to compare alongside
AS+B Spec+B-Spec+EP+F6+FA+FC+FE2+FF+FP+FV+GT1+GT2+GT3+GT3U+GTL+GTX+HP×P+P1+P2+SM+SMX+SRF3+STL+STU+vsT1×T2+T3+T4+
Track configuration
Events

This track has been raced on 2 configurations (The Circuit, 2.57 mi; 2.92 mi). Laps on different configurations are not comparable, so only events on the 2.57 mile layout are shown; switch above to see the others.

PosCarDriverClass#LapTheoreticalQualRace5-lap stintConsistencyTrapS1S2S3
1MG MidgetBill OkellHP71:40.295 B-P1:40.2612:07.503 B-Q12:04.195 A-R22:04.781 A-R2+2.144 A-R2116.4 B-P27.543 B-P28.857 B-P43.861 B-P
2BMW M3Ian BarberiT1741:46.465 B-Q21:46.0661:46.465 B-Q21:47.434 B-R11:47.873 B-R1+0.605 B-R1114.9 B-Q2, B-R228.992 B-Q230.811 B-P46.263 B-Q1
3BMW M4 GT4Drew DelmonicoT1431:47.084 B-Q11:46.3161:47.084 B-Q11:47.467 B-R11:48.228 B-R1+1.310 B-R1161.4 B-P29.150 B-Q230.850 B-R146.316 B-P
4Pontiac GTOEd GlessT1431:59.123 A-R11:58.3401:59.760 A-Q21:59.123 A-R12:00.018 A-R2+1.331 A-R2120.7 A-Q132.383 A-R134.587 A-R251.370 A-R2
5Ford MustangPratt ColeT181:59.261 B-R21:58.8621:59.261 B-R22:01.195 B-R2+2.608 B-R298.6 B-R232.624 B-R234.661 B-R251.577 B-R2
6MG MidgetLee Fleming >115%HP002:03.082 B-R12:00.4182:05.170 A-Q12:03.082 B-R12:04.295 A-R1+1.090 A-R1126.2 A-R230.556 A-Q135.463 B-R154.399 A-R1
7MG MidgetBrian Linn >115%HP482:03.551 A-R12:03.2192:04.965 A-Q12:03.551 A-R12:04.243 A-R1+0.928 A-R1121.0 A-R133.172 A-R135.274 A-R154.773 A-R1
8MG MidgetNoel Hayward >115%HP22:04.870 B-R22:04.7112:04.870 B-R22:10.679 B-R1+4.104 B-R199.2 B-R233.577 B-R236.471 B-R254.663 B-R2
9Toyota YarisBobby Beyer >115%HP182:08.224 B-R22:08.0102:10.927 B-Q12:08.224 B-R22:09.636 B-R2+2.098 B-R292.3 B-R234.660 B-R237.206 B-R256.144 B-R2
10Mini CooperTom Tuttle >115%HP422:09.238 B-R22:08.4162:11.042 B-Q12:09.238 B-R22:10.173 B-R1+1.249 B-R199.0 B-R234.631 B-R137.306 B-R156.479 B-R2

One row per driver and car (a driver who changed cars has a row for each). Each cell is that driver's best in that car across the selected events, with the session it was set in. Best 5-lap stint is the mean of the driver's quickest five consecutive race laps, and consistency is how far their median race lap sat behind their best in that race (small is a driver who does it every lap); both come from the race with the best stint. The fastest in each column is purple, and a car whose best lap is more than 115% of the fastest in its class is greyed (marked ">115%" beside the driver) and left out of the colour scale. Click a column to sort, a row to highlight it. Theoretical lap is the sum of the best sectors, whichever laps they came from, and never slower than the best lap (where a car's fastest laps were recorded without sector times, its best lap is used). The 115% mark is about the car's best lap only: a car whose best lap is within 115% of the fastest in its class is never marked. Greyed sectors with no theoretical lap mean the sector times on file do not add up to a believable lap. Letters refer to the events above; Q is qualifying, R a race.

Sectors

Sectors are numbered in lap order from start/finish, whatever each event's timing called them; the loop names are SCCA timing's.

By car

CarClassDriversLapQualRaceTrapS1S2S3
MG MidgetHP41:40.295Bill Okell2:04.965Brian Linn2:03.082Lee Fleming126.2Lee Fleming27.543Bill Okell28.857Bill Okell43.861Bill Okell
BMW M3T111:46.465Ian Barberi1:46.465Ian Barberi1:47.434Ian Barberi114.9Ian Barberi28.992Ian Barberi30.811Ian Barberi46.263Ian Barberi
BMW M4 GT4T111:47.084Drew Delmonico1:47.084Drew Delmonico1:47.467Drew Delmonico161.4Drew Delmonico29.150Drew Delmonico30.850Drew Delmonico46.316Drew Delmonico
Pontiac GTOT111:59.123Ed Gless1:59.760Ed Gless1:59.123Ed Gless120.7Ed Gless32.383Ed Gless34.587Ed Gless51.370Ed Gless
Ford MustangT111:59.261Pratt Cole1:59.261Pratt Cole98.6Pratt Cole32.624Pratt Cole34.661Pratt Cole51.577Pratt Cole
Toyota YarisHP12:08.224Bobby Beyer2:10.927Bobby Beyer2:08.224Bobby Beyer92.3Bobby Beyer34.660Bobby Beyer37.206Bobby Beyer56.144Bobby Beyer
Mini CooperHP12:09.238Tom Tuttle2:11.042Tom Tuttle2:09.238Tom Tuttle99.0Tom Tuttle34.631Tom Tuttle37.306Tom Tuttle56.479Tom Tuttle

The best any driver of each car managed across the selected events, with who set it. Spellings and model years of the same car are grouped; click a row marked ▸ to see each version. Grouping is worked out from the names, so tell us if two cars are wrongly merged or split.

Rule changes between these events

Cal Club 2024 → Cal Club 2025 2024-02-23 to 2025-02-22

T1 9.1.9.1 T1 new category item/ line 26 rule to expire Jan 1 2023

#35411 from Geoffrey Hegel · Rule change · TB 24-03 (2024-03 Fastrack)

neutralPontiac GTO 2006-2009 LS1 added to T1 as Spec Line 1590, 5700 cc, 3400 lbs minimum.

In T1 Spec Lines, classify Pontiac GTO 2006-2009 as Spec Line Number 1590 as follows:

A specification table follows in the original; it is not shown here.

HP GCR Correction - Redundant HP Spec Lines

#35623 from Production Committee · Rule change · TB 24-03 (2024-03 Fastrack)

neutralHP removes four redundant VW spec lines: Rabbit Cabriolet 1780, Scirocco 1588, Scirocco 1780 8-valve, Scirocco 1588.

In HP Spec Lines, delete the following redundant spec lines in their entirety:
Spec line #10 - VW Rabbit Cabriolet 1780
Spec line #3 - VW Scirocco 1588
Spec line #4 - VW Scirocco 1780 (8-valve) (83-88)
Spec line #5 - VW Scirocco 1588

T1 Honda S2000

#35582 from Touring Committee · Rule change · TB 24-04 (2024-04 Fastrack)

neutralT1 Honda S2000 classified with 2400 lb minimum weight, 2950 cc displacement, 4.75" supercharger pulley.

In T1 Spec Lines, classify Honda S2000 as follows:

A specification table follows in the original; it is not shown here.

HP Replace plastic panels

#35875 from Darryl Saylor · Rule change · TB 24-05 (2024-05 Fastrack)

neutralHP Honda CRX/Si 84-87 plastic panels can be replaced with replica alternate material if stock appearance maintained.

In HP spec line "Honda CRX/Si (84-87)", make the following change to the Notes section:
"The plastic OE front header/nose body panel, lower rocker side-skirt, and lower door cap panel can be replaced by a
replica, which may be constructed of an alternate material, provided its appearance remains stock."

T1 Please Expedite classing the C63 Mercedes

#35987 from Touring Committee · Rule change · TB 24-05 (2024-05 Fastrack)

neutralMercedes AMG-C63 S (2023) classified in T1 with 4000 lbs minimum weight and 3700 restrictor.

In T1 Spec Lines, classify Mercedes AMG-C63 S (2023) as follows:

A specification table follows in the original; it is not shown here.

HP NIssan 300ZX Z31 to EP

#35830 from Murphy Nichols · Rule change · TB 24-06 (2024-06 Fastrack)

neutralNissan 300ZX 84-89 classified to EP at 2550 lbs minimum, 2960cc 6-cyl SOHC, fuel injection, 12.0:1 compression limit, 0.500" valve lift limit.

In EP Spec Lines, classify Nissan 300ZX (84-89), as follows:

A specification table follows in the original; it is not shown here.

HP RX7 1993 and Up Request In EP Spec Lines, classify

#36031 from Edward Zabinski · Rule change · TB 24-06 (2024-06 Fastrack)

neutralMazda RX-7 92-97 newly classified EP Prep Level 2 at 2200–2310 lbs with 13B 6-port rotary engine.

Mazda RX-7 (92-97) as follows:

A specification table follows in the original; it is not shown here.

HP Clean-up Multiple EP RX-8 Spec Lines In EP

#36156 from Production Committee · Rule change · TB 24-06 (2024-06 Fastrack)

neutralEP Mazda RX-8 (04-11) alternate spec line removed; one primary line remains.

Spec Lines, make the following changes to the two Mazda RX-8 spec lines.
Remove spec line entirely:
Mazda RX-8 (04-11)
Remove the wording "alternate":
Mazda RX-8 (04-11)(alternate)
Spec Mazda (SM/SMX) None.

HP Errant entry in HP production line item

#36231 from Angus Crome · Rule change · TB 24-08 (2024-08 Fastrack)

neutralHP Volkswagen Golf and Jetta 85-92 track correction: front 1537mm (60.5in), rear 1529mm (60.2in).

In HP Spec Lines, change Track (F/R)mm/(in.) as follows:
Volkswagen Golf (GTI, GT, GL) (85-92): "2 1537/1529 (60.5/60.2)"
Volkswagen Jetta (GLI, GL) (85-92): "2 1537/1529 (60.5/60.2)"

HP 1275 HP Spridget Level 2 Only

#36518 from Darryl Saylor · Rule change · TB 24-09 (2024-09 Fastrack)

fasterHP Sprite and Midget 1275cc and 1098cc Level 2 compression ratio raised to 12.0:1.

In HP Spec Lines, Austin-Healey Sprite MkI, II, III, IV MG Midget (ALL) - Level 2 - 1275cc, change Notes as follows:
"(Effective 11/1/2024) Compression ratio limited to 11 12.0:1"
In HP Spec Lines, Austin-Healey Sprite MkI, II, III, IV MG Midget (ALL) - Level 2 - 1098cc, change Notes as follows:
"(Effective 11/1/2024) Compression ratio limited to 11 12.0:1"

HP Request for Classification of 1989-1994 Suzuki Swift GT 16V Twin

#36858 from Jorge Fabian · Rule change · TB 24-11 (2024-11 Fastrack)

neutralSuzuki Swift GT 89-94 newly classified to HP Pre at 1900 lbs, 1298cc DOHC fuel injected.

In HP Spec Lines, Classify Suzuki Swift GT (89-94) as follows:

A specification table follows in the original; it is not shown here.

T1 Changes to T1 Tires for GT4 and Other Cars

#35383 from Andrew Aquilante · Rule change · TB 24-12 (2024-12 Fastrack)

unclearT1 GT4 tire sizes adjusted across ten cars: most non-DOT rear to 305/660, Audi and McLaren 305/645, Camaro and Mustang 305/680.

In T1 GT4 Spec Lines, change Tire Size as follows:
Aston Martin Vantage AMR GT4 4010: "315 DOT, 305/660 Non-DOT"
Audi R8 GT4 - Spec Line #4020: "315 DOT, 305/645 Non-DOT"
BMW M4 GT4 - Spec Line #4030: "315 DOT, 305/660 Non-DOT"
Chevrolet Camaro GT4-R- Spec Line #4035: "315 DOT, 305/680 Non-DOT"
Ford Mustang GT4 - Spec Line #4040: "315 DOT, 315/680 Non-DOT"
Mclaren 570S GT4 - Spec Line #4050: "315 DOT, 305/645 Non-DOT"
Mercedes AMG GT4 - Spec Line #4060: "315 DOT, 305/660 Non-DOT"

Show 3 more lines

Porsche 718 Cayman GT4 CS MR - Spec Line #4070: "315 DOT, 305/660 Non-DOT"
Porsche 718 GT4 RS Clubsport - Spec Line #4080: "315 DOT, 305/660 Non-DOT"
Toyota Supra GR GT4 - Spec Line #4090: "315 DOT, 305/660 Non-DOT"

T1 G82 M4 GT4 inclusion in T1

#35864 from Denny Stripling · Rule change · TB 24-12 (2024-12 Fastrack)

neutralBMW M4 GT4 (G82) added to T1 GT4 at 3525 lbs minimum weight with Red power stick control.

In T1 GT4 Spec Lines, SL#4030, change as follows:
Model: "BMW M4 GT4 (F82)"
Performance Control: "Gold power stick Red power stick"
In T1 GT4 Spec Lines, classify BMW M4 GT4 (G82) as follows:

A specification table follows in the original; it is not shown here.

T1 Alt. Clutch Allowance

#36606 from Hugh Stewart · Rule change · TB 24-12 (2024-12 Fastrack)

neutralT1 Spec Lines now permits 5.5 inch clutch in Engine Notes.

In T1 Spec Lines, SL# 1050, change add to Engine Notes the following:
"5.5 inch clutch permitted."

T1 BOP Changes Need Updates

#36667 from Joe Rainey · Rule change · TB 24-12 (2024-12 Fastrack)

fasterT1 GT4 Spec Line 4020 restrictor opens from 44mm to 45mm, minimum weight drops to 3400 lbs.

In T1 GT4 Spec Lines, Spec Line 4020, change as follows:
Performance Control: Power level 2020, 44mm 45mm SRO compliant restrictor"
Min. Weight with driver (LBS): "3550 3400"

T1 Request Ford Performance Darkhorse R in T1

#37136 from Christopher Childs · Rule change · TB 24-12 (2024-12 Fastrack)

neutralMustang Darkhorse R added to T1 homologated cars at 3,250 lbs minimum with 305/315 tires, ineligible for Runoffs until 3 Super Tour events.

In T1-Homologated Cars Spec Line, classify Mustang Darkhorse R (Mustang Challenge) as follows:
T1 – Homologated Cars

A specification table follows in the original; it is not shown here.

T1 Car Mods for T1 Corvette under line item 1150

#37173 from Thomas Napolitano · Rule change · TB 24-12 (2024-12 Fastrack)

neutralT1 Corvette may roll or flatten wheel opening lips for tire clearance; plastic fenders may remove lips if edge thickness matches basic material.

In GCR, Section 9.1.9.1.A.2,, add the following:
"It is permitted to roll under or flatten any interior lip on the wheel opening for tire clearance. Cars with plastic/composite
fenders may remove any interior wheel opening lip, but the resulting material edge shall be no thinner than the basic fender
material thickness. Non-metallic inner fender liners may be removed. Vents may be added to fenders."

HP MINI Cooper Spec Line Correction - Rear Brake Rotor Diameter

#37176 from Robert Bax · Rule change · TB 24-12 (2024-12 Fastrack)

neutralHP Mini Cooper 02-06 rear brake rotor increases from 239/9.4 mm/in to 259/10.2.

In HP Spec Lines, Mini Cooper (02-06), change Brakes Std.mm/(in.) as follows:
"(F) 276/(10.9) Vented Disc (R) 239/(9.4) 259/(10.2) Solid Disc"

Applies to Mini Cooper on this page: Tom Tuttle

T1 Increased Bore Throttle Bodies for E46 M3 S54 Engine

#37273 from Mark Pfeffer · Rule change · TB 24-12 (2024-12 Fastrack)

fasterT1 E46 M3 S54 can now use Dinan Throttle Body #D760-3400 on 3.250L engine.

In T1 Spec Lines, E46 M3 Spec Line # 1050, add to Engine Notes the following:
"Dinan Throttle Body #D760-3400 allowed on the 3.250L."

HP Request to Reduce Weight of BMW 325i/is E30 (84-91) Spec Line

#37119 from Tim Schreyer · Rule change · TB 25-01 (2025-01 Fastrack)

fasterEP BMW 325i/is E30 (84-91) weight reduced 50–52 lbs across three spec lines to 2150, 2204, 2258.

In EP SPEC LINES, BMW 325i/is (E30) (84-91), change Weight as follows:
"2200 2150
*2255 2204
**2310 2258"

HP Request to Update 1988-1991 Civic to Match 1988-1991 CRX

#37444 from ENRIK BENAZIC · Rule change · TB 25-01 (2025-01 Fastrack)

fasterHP Honda Civic 1.5 88-91 weight reduced to 2175 lbs base, 2229 lbs with one asterisk, 2284 lbs with two asterisks.

In HP SPEC LINES, Honda Civic 1.5 (88-91), change Weight as follows:
"2245 2175
*2301 2229
**2357 2284"

T1 T1 Parity Compared to GT4

#37170 from Tony Ave · Rule change · TB 25-02 (2025-02 Fastrack)

slowerT1 Mustang gains 125 lbs to 3600, restrictor shrinks 65mm to 60mm. Corvette gains 50 lbs to 3500, restrictor shrinks 70mm to 67mm. BMW deleted.

In T1 Spec Lines, change Weight and Restrictor Required as follows:
Mustang - Spec Line 1430
Weight: "3475 3600"
Restrictor Required: "65mm 60mm - FPR"
Corvette Spec Line 1190
Weight: "3450 3500"
Restrictor Required: "70mm 67mm - Flat Plate"
In T1 Spec Lines, delete Spec Line BMW # 1190 in its entirety.

T1 Clarification of Request Approval #37273

#37399 from Mark Pfeffer · Rule change · TB 25-02 (2025-02 Fastrack)

unclearT1 E46 M3 Spec Line 1050 allows VAC Motorsports throttle body VAC-TB-S54 on 3.250L engine instead of Dinan.

In T1 Spec Lines, E46 M3 Spec Line # 1050, change Engine Notes as follows:
"Dinan Throttle Body #D760-3400 VAC Motorsports #VAC-TB-S54 allowed on the 3.250L."

T1 C8 Corvette Facts

#37400 from Garry Crook · Rule change · TB 25-02 (2025-02 Fastrack)

fasterT1 Chevrolet Corvette C8 (2023-23) minimum weight reduced from 3600 lbs to 3500 lbs.

In T1 Spec Lines, Chevrolet Corvette C8 (20- 23) - Includes Z51, Spec Line # 1210, change Min. Weight as follows:
"3600 3500"

T1 Camaro Gen 5 Competitive Disadvantage

#37440 from Clark Nunes · Rule change · TB 25-02 (2025-02 Fastrack)

fasterT1 Chevrolet Camaro Gen 5 restrictor increases from 75mm to 80mm flat plate.

In T1 Spec Lines, Chevrolet Camaro Gen 5 (10-15) Including SS, Z28 Spec Line 1135, change Required Restrictor as follows:
"75mm 80mm - Flat Plate"

T1 Tire Changes in the Rules for GT4

#37497 from Joe Rainey · Rule change · TB 25-02 (2025-02 Fastrack)

unclearT1 Audi R8 GT4 Spec Line #4020 maximum tyre size changes to 315 DOT, 305/645, or 30/65-18 (f), 33/68-18 (r) Non-DOT.

In T1-GT4 Spec Lines, Audi R8 GT4 Spec Line #4020, change Max Tire Size as follows:
"315 DOT, 305/645, or 30/65-18 (f), 33/68-18 (r) Non-DOT"

HP Effective date for Jan 2025 GCR updates

#37654 from Doug Piner · Rule change · TB 25-02 (2025-02 Fastrack)

slowerEP BMW Z3 2.5L requires 52mm flat plate intake restrictor; Z3 2.8L 55mm; 328i/is E36 58mm; 328i/ci E46 58mm; 325i/is E46 56mm; 325i/is E36 56mm; 325is M-Technic 56mm.

In EP Spec Lines, add to Notes as follows:
BMW Z3 2.5LL "(Effective 2/21/2025) 52mm Flat Plate Intake Restrictor is required."
BMW Z3 2.8L (97-00): "(Effective 2/21/2025) 55mm Flat Plate Intake Restrictor is required."
BMW 328i/is E36 (96-99): "(Effective 2/21/2025) 58mm Flat Plate Intake Restrictor is required."
BMW 328i/ci E46 (01-06): "(Effective 2/21/2025) 58mm Flat Plate Intake Restrictor is required."
BMW 325i/is E46 (01-06): "(Effective 2/21/2025) 56mm Flat Plate Intake Restrictor is required."
BMW 325i/is E-36 (92-95): "(Effective 2/21/2025) 56mm Flat Plate Intake Restrictor is required."
BMW 325is M-Technic (1994): "(Effective 2/21/2025) 56mm Flat Plate Intake Restrictor is required."

Cal Club 2025 → Cal Club 2026 2025-02-22 to 2026-02-21

HP Request Competition Adjustment to BMW Z3 2.5L

#37120 from Tim Schreyer · Rule change · TB 25-01 (2025-01 Fastrack)

slowerEP BMW Z3 and 3-series models get smaller intake restrictors: Z3 2.5L to 52mm, Z3 2.8L to 55mm, 328i to 58mm, 325i to 56mm.

In EP Spec Lines, change Notes as follows:
BMW Z3 2.5LL "(Effective 3/1/2025) 56mm 52mm Flat Plate Intake Restrictor is required."
BMW Z3 2.8L (97-00): "(Effective 3/1/2025) 59mm 55mm Flat Plate Intake Restrictor is required."
BMW 328i/is E36 (96-99): "(Effective 3/1/2025) 62mm 58mm Flat Plate Intake Restrictor is required."
BMW 328i/ci E46 (01-06): "(Effective 3/1/2025) 62mm 58mm Flat Plate Intake Restrictor is required."
BMW 325i/is E46 (01-06): "(Effective 3/1/2025) 60mm 56mm Flat Plate Intake Restrictor is required."
BMW 325i/is E-36 (92-95): "(Effective 3/1/2025) 60mm 56mm Flat Plate Intake Restrictor is required."
BMW 325is M-Technic (1994): "(Effective 3/1/2025) 60mm 56mm Flat Plate Intake Restrictor is required."

HP Interpretation of Production Rules on Mirrors

#37235 from Lawrence Slivinski · Rule change · TB 25-03 (2025-03 Fastrack)

neutralEP, FP, HP: interior or exterior mirrors meeting rule 9.3.36 now permitted.

In GCR, add new rule as Section 9.1.5.E.10.f:
"Any interior or exterior mirror(s) that meets rule 9.3.36 may be used."

HP HP Class Adjustments

#37459 from Production Committee · Rule change · TB 25-01 (2025-01 Fastrack)

slowerHP Mazda 2 11-14 base weight up 50 lbs to 2045; all VW 80s models up 50 lbs to 2150 base.

In HP SPEC LINES, change Weight as follows:
Mazda 2 (11-14)
"(Effective 3/1/2025) 1995 2045
*2045 2096
**2095 2147"
Volkswagen Golf (GTI, GT, GL) (85-92)
"(Effective 3/1/2025) 2100 2150
*2153 2204

Show 13 more lines

**2205 2258"
Volkswagen Jetta (GLI, GL) (85-92)
"(Effective 3/1/2025) 2100 2150
*2153 2204
**2205 2258"
Volkswagen Rabbit 1780
"(Effective 3/1/2025) 2100 2150
*2153 2204
**2205 2258"
Volkswagen Scirocco 1780 (8-valve) (83-88)
"(Effective 3/1/2025) 2100 2150
*2153 2204
**2205 2258"

HP Weight Reduction for Honda S2000

#37466 from Michael Unger · Rule change · TB 25-03 (2025-03 Fastrack)

fasterEP Honda S2000 1997cc base loses 75 lbs to 2375; 2157cc base loses 60 lbs to 2450.

In EP, Spec Lines make the following weight changes:

A specification table follows in the original; it is not shown here.

HP Mazda 1999 Miata 1.8L

#37488 from Joe Carr · Rule change · TB 25-03 (2025-03 Fastrack)

fasterEP Mazda MX-5/Miata 99-05 minimum weight drops to 2100 lbs, 2153 lbs with power adder, 2205 lbs with two adders.

In EP Spec Lines, make the following weight change:
Mazda MX-5 /Miata (99-05):
"2150 2100
*2204 2153
**2258 2205"

HP MINI Cooper (07-13) Spec Line Correction: Errors and Omissions

#37560 from Robert Bax · Rule change · TB 25-03 (2025-03 Fastrack)

slowerHP Mini Cooper 07-13 engine corrected to DOHC; valve lift limit reduced to 0.390 inches.

In HP Spec Lines, Mini Cooper (07-13) (includes 09-15 convertible and 12-15 Coupe), change as follows:
Engine Type:
"4 Cyl
SOHC DOHC"
Notes:
"Compression ratio limited to 11.0:1, Valve lift limited to .450”.390"."

Applies to Mini Cooper on this page: Tom Tuttle

T1 Correct and make new T1 BOP adjustments.

#37737 from Touring Committee · Rule change · TB 25-03 (2025-03 Fastrack)

unclearT1 Mustang Spec 1430 restrictor opens 60mm to 65mm; Spec 1460 weight rises to 3500 lbs, restrictor 70mm; Corvette 1190 restrictor opens 67mm to 70mm; BMW 1090 restrictor narrows 40mm to 35mm; BMW 1100 weight rises to 3350 lbs.

In T1 Spec Lines, change Weight, Restrictor Required and/or Notes as follows:
Mustang - Spec Line 1430:
Restrictor Required: "60mm 65mm - FPR"
Mustang - Spec Line 1460:
Weight: "3425 3500"
Restrictor Required: "70mm - FPR"
Corvette Spec Line 1190:
Restrictor Required: "67mm 70mm - Flat Plate"

Show 5 more lines

BMW - Spec Line 1090:
Required Restrictor: "(2) X 40mm 35mm diameter hole inlet restrictor plate required"
Chassis Notes: "This spec line is set to expire 12/31/25."
BMW - Spec Line 1100:
Minimum Weight: "3150 3350”

HP Request for Classification of Chevrolet Spark

#37755 from Kristian Smith · Rule change · TB 25-04 (2025-04 Fastrack)

neutralChevrolet Spark 16-22 classified HP Pre at 1850 lbs minimum weight, fuel injected, 1399 cc.

In HP Spec Lines, classify the Chevrolet Spark (16-22):

A specification table follows in the original; it is not shown here.

HP Request to Lower Ford Festiva Minimum Weight to 1600 LBS

#37939 from Doug DeRonne · Rule change · TB 25-04 (2025-04 Fastrack)

fasterHP Ford Festiva 88-93 minimum weight drops to 1600 lbs, variants to 1640 and 1680 lbs; compression ratio raised to 11.0:1.

In HP Spec Lines "Ford Festiva (88-93)" change as follows:
Weight:
"1700 1600
*1743 1640
**1785 1680"
Notes:
"Compression ratio limited to 10.5 11.0:1. Valve lift limited to .450”."

T1 Cadillac CT4-V Blackwing

#38003 from Touring Committee · Rule change · TB 25-04 (2025-04 Fastrack)

neutralCadillac CT4-V Blackwing added to T1 Spec Line 1115, 3564cc, 3750 lbs minimum weight.

In T1 Spec Lines, classify Cadillac CT4-V Blackwing as follows:

A specification table follows in the original; it is not shown here.

T1 Acceptance of Porsche 981 GT4 Clubsport into T1

#36664 from John Brown · Rule change · TB 25-05 (2025-05 Fastrack)

neutralPorsche 981 GT4 Clubsport added to T1 as spec line 4085, minimum weight 3100 lbs with driver.

In T1-GT4 Spec Lines, classify Porsche 981 GT4 Clubsport as follows:

A specification table follows in the original; it is not shown here.

T1 Request to Restore T1 Honda S2000 to Proper Weights

#37644 from David Mead · Rule change · TB 25-05 (2025-05 Fastrack)

fasterT1 Honda S2000 minimum weight reduced from 2950 lbs to 2900 lbs.

In T1 Spec Lines, Honda S2000, Spec Line 1530, change as follows:
Minimum Weight: "2950 2900"
Chassis Notes: "This spec line is set to expire as of 12/31/2025 if not represented in Majors competition in 2025."

T1 DCT Transmission in E46

#37964 from Matt Spicuzzi · Rule change · TB 25-05 (2025-05 Fastrack)

neutralT1 BMW E46 M3 permits BMW #GS7D36SG aftermarket sequential transmission in SL# 1060 and 1070.

In T1 Spec Lines, BMW E46 M3, add to Chassis Notes the following:
SL# 1060: "BMW #GS7D36SG transmission permitted as an aftermarket sequential option."
SL# 1070: "BMW #GS7D36SG transmission permitted as an aftermarket sequential option."

Applies to BMW M3 on this page: Ian Barberi

T1 Reduce E92 M3 Minimum Weight to 3050

#38092 from Shane Brown · Rule change · TB 25-05 (2025-05 Fastrack)

fasterT1 BMW M3 E92 minimum weight reduced to 3300 lbs.

In T1 Spec Lines, BMW M3 E92 (08-13), Spec Line 1100, change Min. Weight as follows:
"3350 3300"

T1 Finalize Spec Line for T1 Darkhorse

#38106 from Touring Committee · Rule change · TB 25-05 (2025-05 Fastrack)

fasterT1 Mustang Darkhorse R gets 315 front and rear tyres, loses 500 lbs minimum weight to 3600.

In T1 Spec Lines, Mustang Darkhorse R (Mustang Challenge) Spec Line- 4119, change as follows:
Tire size: "305 315 (f) 315(r)"
Performance Control: "TBD"
Min. Weight with driver (LBS): "10.5 (f) 11 (r) 3600"
Chassis Notes: "Must conform to Mustang Challenge Rules. Tires conforming to Mustang Challenge rules are permitted. **This
car is not eligible for the Runoffs until it has competed in 3 Super Tour events.**"

HP Base Weight Adjustment for H-Production X1/9 Spec Lines

#38255 from Matthew Brannon · Rule change · TB 25-06 (2025-06 Fastrack)

fasterHP Fiat X-1/9 base weights reduced 50–53 lbs across 1300 and 1500 spec lines.

In HP Spec Lines, change Weight as follows:
Fiat X-1/9 & Bertone1500: “1790 1740 *1835 1784 **1880 1827”
Fiat X-1/9 1300: “1650 1600 *1691 1640 **1733 1680”
Fiat X-1/9 1300: “2060 2010”
Fiat X-1/9 1500: “1950 1900”

HP BMW Z4 update

#38490 from Bryce McGuire · Rule change · TB 25-07 (2025-07 Fastrack)

slowerEP BMW Z4 03-05 restricted to 52mm flat plate intake restrictor.

In EP Spec Lines, BMW Z4 (03-05), add to Notes the following:
“52mm Flat Plate Intake Restrictor.”

HP EP Fiat 124 Spider Competition Adjustment Request

#38498 from John Baucom · Rule change · TB 25-07 (2025-07 Fastrack)

fasterEP Fiat 124 Spider 1600 & 2000 weight drops 50 lbs to 2000; carburetors gain 2mm chokes to 36mm.

In EP Spec Lines, Fiat 124 Sport Spider 1600 & 124 Spider 2000, change as follows:
Weight: "2050 2000"
Carburetor No. & Type: "(2) Weber 40 IDF-40IFI, (2) Solex C40P116, 34 36mm choke(s) req’d, (2) Weber 45DCOE w/ 34 36 mm
choke(s) on I.R. manifold or fuel injection."

HP HP Plymouth Arrow spec omission

#38995 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

neutralHP Plymouth Arrow transmission max speeds clarified to 4 or 5.

In HP Spec Lines, Plymouth Arrow (76-80), add the following wording to Trans. Speeds(max):
"4 or 5"

HP Add Wheel Diameter to Appendix G

#39008 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

neutralEP, FP, HP wheel diameter added to Appendix G as absolute maximum specification.

In Appendix G.2.3, change as follows:
"Rim width and diameter are is absolute maximums."

HP Add TB ID tolerance to general Prod rules

#39009 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

neutralEP, FP, HP throttle body inside dimensions must remain stock with +/-.25mm tolerance; butterfly dimensions stock in FP, HP only.

In GCR, Section 9.1.5.E., change as follows:
9.1.5.E.1.b.4: "The inside dimensions of the throttle body casting/housing (as measured at the throttle butterfly) must remain
stock (tolerance of +/-.25mm), but the throttle body can otherwise be ported and polished."
9.1.5.E.2.b.4: "The inside dimensions of the throttle body casting/housing and all dimensions of the throttle butterfly must
remain stock (tolerance of +/-.25mm)."

HP Please Lower Weight of 280Z

#38871 from Matthew Miller · Rule change · TB 25-09 (2025-09 Fastrack)

fasterEP Nissan 280Z minimum weight reduced from 2560 to 2400 lbs.

In EP Spec Lines, Nissan 280Z, change Weight (lbs) as follows:
"(Effective 11/1/2025) 2560 2400
*2624 2460
**2688 2520"

HP Miata Weight Adjustment Follow Up

#38949 from Don Tucker · Rule change · TB 25-10 (2025-10 Fastrack)

fasterEP Mazda MX-5 1.8L 90-97 weight reduced to 2125 lbs from 2150 lbs.

In EP Spec Lines, Mazda MX-5 / Miata 1.8L (90-97), Effective 11/1/2025 make the following weight change:
"2150 2125"

HP Weight Break for 1098 Midget / Sprite

#38970 from Kendall Jones · Rule change · TB 25-10 (2025-10 Fastrack)

fasterHP Austin-Healey Sprite/Midget 1098cc minimum weight drops 80 lbs to 1550.

In HP Spec Lines, Austin-Healey Sprite/Midget 1098cc, Effective 11/1/2025make the following weight change:
"1630 1550"

HP HP Volvo 142 spec omission

#38994 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

slowerHP Volvo 142/142E gains compression ratio limit 12.0:1 and valve lift limit .425".

In HP Spec Lines, Volvo 142/142E P-1800 Engine, Effective 11/1/2025 add the following wording to Notes:
"Comp. Ratio limited to 12.0:1. Valve lift limited to .425”."

HP HP Mini DOHC 1.6

#38996 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

slowerHP Mini Cooper 07-15 valve lift reduced to .390", from .450".

In HP Spec Lines, Mini Cooper (07-13) (includes 09-15 convertible and 12-15 Coupe), Effective 11/1/2025 make the following
changes to the Notes:
"Compression ratio limited to 11.0:1, Valve lift limited to .450”.390"."

HP Add to Rabbit description

#39019 from Production Committee · Rule change · TB 25-11 (2025-11 Fastrack)

neutralFP and HP Volkswagen Rabbit descriptions updated: Convertible changed to Cabriolet in FP; Cabriolet added to three HP engine variants.

In FP Spec Lines, make the following spec line correction:
"Volkswagen Rabbit (Includes Convertible Cabriolet)"
In HP Spec Lines, make the following spec line correction:
"Volkswagen Rabbit 1588 (Includes Cabriolet)"
"Volkswagen Rabbit 1715 (Includes Cabriolet)"
"Volkswagen Rabbit 1780 (Includes Cabriolet)"

HP Clean-up 9.1.5.E.7e

#39025 from Production Committee · Rule change · TB 25-11 (2025-11 Fastrack)

neutralEP, FP, HP: rear drum brake to disc conversion clarified; rotors solid, diameter limited to largest front rotor permitted.

In GCR, Section 9.1.5.E.7., change as follows:
"e. Cars fitted with rear drum brakes, can convert to rear disc brakes without penalty. Note that the “Brakes Std.” and “Brakes
Alt.” listings on a vehicle’s spec line do not prohibit a car that was fitted with rear drum brakes stock, from converting to rear
disc brakes under this rule. When converting from rear drum brakes to rear disc brakes:
1. Rear brake rotors must be solid and can be no larger in diameter than the largest permitted front brake rotor, as defined on
the vehicle’s spec line.
2. Rear calipers and mounting brackets are unrestricted but must be made of a ferrous or aluminum material. The standard and
alternate brake listings on a vehicle’s specification line, does not prohibit a car that was fitted with rear drum brakes as stock

Show 3 more lines

from converting to rear disc brakes under this rule.
3. The “Brakes Std.” and “Brakes Alt.” listings on a vehicle’s spec line do not prohibit a car that was fitted with rear drum brakes
as stock from converting to rear disc brakes under this rule."

HP Add TB size to Ford Mustang (94-98) Spec Line

#39130 from Production Committee · Rule change · TB 25-11 (2025-11 Fastrack)

neutralEP Ford Mustang (94-98) fuel injected throttle body inside diameter specified at 60.

In EP Spec Lines, Ford Mustang (94-98) add the following to the Fuel Injected Equipped Throttle Body Inside Diameter column:
"60"

HP Request to Re-Classsify Datsun SPL-311 to HP from FP

#39116 from Robert Heatwole · Rule change · TB 25-12 (2025-12 Fastrack)

neutralDatsun SPL-311 newly classified to HP at 2050 lbs with 1595cc OHV iron engine and specified carburetors.

In HP Spec Lines, classify Nissan/Datsun SPL 311 as follows:

A specification table follows in the original; it is not shown here.

HP TR2 Notes E&O

#39180 from Anthony Parker · Rule change · TB 25-12 (2025-12 Fastrack)

unclearEP Triumph TR2-TR4A allows 5-speed gearbox without overdrive; removes Weber carb and weight specification.

In EP Spec Lines, Triumph TR2, 3, 3A, 4, 4A, TR4, TR4A, IRS, make the following change to the Notes:
"Front apron assembly may be made of alternate material. Three (3) Weber 40 DCOE on IR manifold with 28mm chokes @ 1990
lbs. Laycock overdrive, may use 5 speed gearbox without overdrive."

HP Balance of Power

#39187 from Jim Simaras · Rule change · TB 25-12 (2025-12 Fastrack)

slowerEP BMW Z3 2.5L restrictor reduced 52mm to 50mm, weight increased to 2550 lbs base; five other BMW models get smaller restrictors.

In EP Spec Lines, make the following changes to Restrictors:
BMW Z3 2.5L: "52mm 50mm Flat Plate Intake Restrictor"
BMW Z3 2.8L (97-00): "55mm 53mm Flat Plate Intake Restrictor"
BMW 328i/is E36 (96-99): "58mm 55mm Flat Plate Intake Restrictor"
BMW 328i/ci E46 (01-06): "58mm 55mm Flat Plate Intake Restrictor"
BMW 325i/is (E46) (01-06): "56mm 53mm Flat Plate Intake Restrictor"
BMW 325is M-Technic (1994): "56mm 53mm Flat Plate Intake Restrictor"
BMW 325i/is E-36 (92-95): "56mm 53mm Flat Plate Intake Restrictor"

Show 4 more lines

In EP Spec Lines, BMW Z3 2.5L, change Weight as follows:
"2500 2550
*2563 2614
**2625 2678"

HP Alternative BOP Request for 84-87 Honda CRX/Civic

#39223 from Bill Lamkin · Rule change · TB 25-12 (2025-12 Fastrack)

fasterHP Honda Civic and CRX models get wider 13-inch wheels: 6 to 7 inches.

In HP Spec Lines, change Wheels as follows:
Honda Civic: "13 x 6 7"
Honda Civic DX (92-95): "13 x 6 7"
Honda Civic/Si (84-87): "13 x 6 7"
Honda Civic 1.5 (88-91): "13 x 6 7"
Honda CRX/Si (84-87): "13 x 6 7"
Honda CRX 1.5(88-91): "13 x 67"

T1 Keep S2000 Classification

#39344 from David Mead · Rule change · TB 25-12 (2025-12 Fastrack)

unclearUnable to summarize: letter states intent but provides no actual rule changes to S2000 specification.

In T1 Spec Lines, Honda S2000, change as follows:

T1 Correcting and updating T1 GT4 spec lines

#39394 from Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

In T1-GT4 Spec Lines, change as follows:

A specification table follows in the original; it is not shown here.

T1 BOP adjustments to non GT4 T1 cars

#39406 from Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

fasterT1 non-GT4 cars: multiple restrictors enlarged (70mm to 73mm, 75mm to 78mm, 55mm to 60mm, 61mm to 70mm); one weight increased to 3600.

In T1 Spec Lines, change as follows:
Spec Line # 1134
Required Restrictor: "61mm 70mm - Flat Plate"
Spec Line # 1140
Required Restrictor: "72mm - Flat Plate"
Spec Line # "1175"
Maximum Displ.: "L76 5967cc OEM"
Minimum Weight: "3250"

Show 38 more lines

Required Restrictor: "80mm"
Engine Notes: "An L76 is an LS2 block with LS3 intake manifold and heads. All parts must be OEM. May resleeve to stock
parameters for engine repair."
Spec Line # 1180
Required Restrictor: "75mm 78mm - Flat Plate"
Spec Line # 1190
Required Restrictor: "70mm 73mm - Flat Plate"
Spec Line # 1200
Required Restrictor: "72mm 78mm - Flat Plate"
Spec Line # 1201
Required Restrictor: "70mm 73mm - Flat Plate"
Spec Line # 1210
Required Restrictor: "72mm - Flat Plate"
Spec Line # 1350
Required Restrictor: "(2) 55mm 60mm flat plate"
Spec Line # 1370
Required Restrictor: "(2) 55mm 60mm flat plate"
Spec Line # 1390
Required Restrictor: "(2) 55mm 60mm flat plate"
Spec Line # 1420 "*Spec line Expires 12/23"
Required Restrictor: "52mm FPR"
Spec Line # 1429
Required Restrictor: "75mm - FPR"
Spec Line # 1460
Weight: "3500 3600"
Required Restrictor: "70mm - FPR"
Spec Line # 1480
Required Restrictor: "80mm FPR"
Spec Line # 1490
Required Restrictor: "75mm - FPR"
Spec Line # 1590
Engine Notes: "90mm Throttle Body Permitted"
Spec Line # 1595
Required Restrictor: "72mm – FPR"
Spec Line # 1596
Required Restrictor: "61mm 70mm – FPR"
Spec Line # 4120
Required Restrictor: "75mm flat plate"

T1 Remove T1 Spec Line

#39407 from Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

neutralT1 BMW M3 E92 (08-13) Spec Line 1090 removed entirely.

In T1 Spec Lines, BMW M3 E92 (08-13) Spec Line number 1090, delete Spec Line in its entirety.

HP E/O: Improve Consistency of the Spec Lines

#39500 from Robert Bax · Rule change · TB 26-01 (2026-01 Fastrack)

unclearHP Toyota MR-2 1.6L (85-89) compression ratio set to 11.0:1.

In HP Spec Line, Toyota MR-2 1.6L (85-89), change Comp. Ratio as follows:
"11.0:1"

T1 additional T1 adjustment

#39520 from Touring Committee · Rule change · TB 26-01 (2026-01 Fastrack)

unclearT1 Spec Line restrictor changes from 70mm flat plate to unspecified new specification.

In T1 Spec Line, Spec line # 1132, change Restrictor as follows:
"70mm - Flat Plate"

HP Request to Reclassify BMW 2002 Into H Production

#39567 from Jonathan Kinberg · Rule change · TB 26-01 (2026-01 Fastrack)

neutralBMW 2002 newly classified to H Production at 2350 lbs with 1990cc iron block, 40 DCNF carburetor, 11.0:1 compression.

In HP Spec Lines, classify BMW 2002, as follows:

A specification table follows in the original; it is not shown here.

HP Triumph Spitfire 1296cc Compression Ratio Increase to 12:1

#39589 from Neil Verity · Rule change · TB 26-02 (2026-02 Fastrack)

fasterHP Triumph Spitfire 1296cc compression ratio increases from 11.0 to 12.0:1.

In HP Spec Lines, make the following spec line changes:
Triumph Spitfire:
Carburetion
"Valves: (I) 33.0/(1.30) (E) 29.7/(1.17)
Comp. ratio 11.0 12.0:1, Valve lift .450”
Trans. Speeds: 4"
Triumph Spitfire Mk. III & IV 1500:
Carburetion

Show 5 more lines

"1300 Valves: (I) 33.0/(1.30) (E) 29.7/(1.17)
1500 Valves: (I) 36.6/(1.44) (E) 29.7/(1.17)
1300: Comp. ratio 12.0:1, Valve lift .450”
1500: Comp. ratio 11.0:1, Valve lift .450”
Trans. Speeds: 4"

T1 LS1 into Corvette C6 Spec Line Request

#39716 from Danny Kellermeyerhttps://crbscca.com/secu · Rule change · TB 26-02 (2026-02 Fastrack)

neutralT1 Corvette C6 LS1/LS6 Spec Line reinstated: 3200 lbs minimum weight, 70mm restrictor required.

In T1 Spec Lines, reinstate Spec Line # 1139, Chevrolet Corvette C6 (05-13) Includes Z51, GrandSport, Z06, Z06 Carbon, as
follows:
Max Displ: "LS1, LS6 OEM"
Min Weight: "3200"
Required Restrictor: "70mm"

What the rules allowed changed as listed; this does not say what any particular car ran.