T1 + FE2 + STU at Buttonwillow Raceway Park

2024-03-01 T1 9.1.9.1 T1 new category item/ line 26 rule to expire Jan 1 2023

#35411 from Geoffrey Hegel · Rule change · TB 24-03 (2024-03 Fastrack)

In T1 Spec Lines, classify Pontiac GTO 2006-2009 as Spec Line Number 1590 as follows:

A specification table follows in the original; it is not shown here.

2024-03-01 STU Letter #35397 addendum

#35453 from Aaron Fitzsimmons · Rule change · TB 24-03 (2024-03 Fastrack)

In STU Spec Lines, Mini Cooper S SC with Minimum Weight 1900 and 2100, add to Notes:
"Alternate LEAP OMICRON hood scoop part # LEP-OMICRON3 is permitted."

2024-03-01 STU S54 Drysump

#35464 from Macey Urso · Rule change · TB 24-03 (2024-03 Fastrack)

In STU Spec Lines, BMW S54 B32 OEM, add to Notes as follows:
"Dry Sump oiling system permitted."

2024-04-01 T1 Honda S2000

#35582 from Touring Committee · Rule change · TB 24-04 (2024-04 Fastrack)

In T1 Spec Lines, classify Honda S2000 as follows:

A specification table follows in the original; it is not shown here.

2024-05-01 T1 Please Expedite classing the C63 Mercedes

#35987 from Touring Committee · Rule change · TB 24-05 (2024-05 Fastrack)

In T1 Spec Lines, classify Mercedes AMG-C63 S (2023) as follows:

A specification table follows in the original; it is not shown here.

2024-08-01 STU RWD Turbo Disadvantage

#36255 from David Fiorelli · Rule change · TB 24-08 (2024-08 Fastrack)

In GCR, Section 9.1.4.1.H.3 - Inlet Restrictor (mm) Minimum Weight (lbs) table, change as follows:
"RWD cars must reduce restrictor 1 mm from this table"

2024-11-01 STU R53 15% Pulley Request

#36980 from Aaron Fitzsimmons · Rule change · TB 24-11 (2024-11 Fastrack)

In STU Spec Lines, Mini Cooper S SC, add to notes:
1900: "Stock supercharger pulley. 2.565 diameter."
2100: "JCW Pulley permitted. May run a 2.285 diameter pulley."

2024-12-01 T1 Changes to T1 Tires for GT4 and Other Cars

#35383 from Andrew Aquilante · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 GT4 Spec Lines, change Tire Size as follows:
Aston Martin Vantage AMR GT4 4010: "315 DOT, 305/660 Non-DOT"
Audi R8 GT4 - Spec Line #4020: "315 DOT, 305/645 Non-DOT"
BMW M4 GT4 - Spec Line #4030: "315 DOT, 305/660 Non-DOT"
Chevrolet Camaro GT4-R- Spec Line #4035: "315 DOT, 305/680 Non-DOT"
Ford Mustang GT4 - Spec Line #4040: "315 DOT, 315/680 Non-DOT"
Mclaren 570S GT4 - Spec Line #4050: "315 DOT, 305/645 Non-DOT"
Mercedes AMG GT4 - Spec Line #4060: "315 DOT, 305/660 Non-DOT"

2024-12-01 T1 G82 M4 GT4 inclusion in T1

#35864 from Denny Stripling · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 GT4 Spec Lines, SL#4030, change as follows:
Model: "BMW M4 GT4 (F82)"
Performance Control: "Gold power stick Red power stick"
In T1 GT4 Spec Lines, classify BMW M4 GT4 (G82) as follows:

A specification table follows in the original; it is not shown here.

2024-12-01 T1 Alt. Clutch Allowance

#36606 from Hugh Stewart · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 Spec Lines, SL# 1050, change add to Engine Notes the following:
"5.5 inch clutch permitted."

2024-12-01 T1 BOP Changes Need Updates

#36667 from Joe Rainey · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 GT4 Spec Lines, Spec Line 4020, change as follows:
Performance Control: Power level 2020, 44mm 45mm SRO compliant restrictor"
Min. Weight with driver (LBS): "3550 3400"

2024-12-01 T1 Request Ford Performance Darkhorse R in T1

#37136 from Christopher Childs · Rule change · TB 24-12 (2024-12 Fastrack)

In T1-Homologated Cars Spec Line, classify Mustang Darkhorse R (Mustang Challenge) as follows:
T1 – Homologated Cars

A specification table follows in the original; it is not shown here.

2024-12-01 STU Request to Remove Miata Hubs from General category

#37138 from Christopher Childs · Rule change · TB 24-12 (2024-12 Fastrack)

In GCR, Section 9.1.4.M.18., change as follows:
"18. Allow alternate front wheel front hubs, Mazda Motorsports Development Part #0000-04-5HUB-S1, for the 90-05 Mazda
Miata: Mazda Motorsports Development Part #0000-04-5HUB-S1."

2024-12-01 STU BMW N54/N55 Engine Allowance

#37146 from Martin Sarukhanyan · Rule change · TB 24-12 (2024-12 Fastrack)

"Turbo inlet restrictors designed per GCR Appendix F Technical Glossary definition of “Turbo Inlet Restrictor” may be required;
see table 9.1.4.1.H.h.2 3. Swapping of turbochargers between engine makes and models is prohibited. Supercharged cars may be
approved on a case-by-case basis; twin turbo engines are allowed on a case-by-case basis only. Contact the Road Racing
Technical Office for details. Twin turbo engines may be converted to single turbo using one of the allowed alternate turbos (see
9.1.4.1.H.3 2). Aftermarket turbocharger and supercharger kits will be allowed on a case-by-case basis.

2024-12-01 T1 Car Mods for T1 Corvette under line item 1150

#37173 from Thomas Napolitano · Rule change · TB 24-12 (2024-12 Fastrack)

In GCR, Section 9.1.9.1.A.2,, add the following:
"It is permitted to roll under or flatten any interior lip on the wheel opening for tire clearance. Cars with plastic/composite
fenders may remove any interior wheel opening lip, but the resulting material edge shall be no thinner than the basic fender
material thickness. Non-metallic inner fender liners may be removed. Vents may be added to fenders."

2024-12-01 T1 Increased Bore Throttle Bodies for E46 M3 S54 Engine

#37273 from Mark Pfeffer · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 Spec Lines, E46 M3 Spec Line # 1050, add to Engine Notes the following:
"Dinan Throttle Body #D760-3400 allowed on the 3.250L."

2025-01-01 STU Audi 1.8t Wagon STU Table B

#36685 from Mike McLaughlin · Rule change · TB 25-01 (2025-01 Fastrack)

In STU Spec Lines, Table B: Alternate Vehicle and Engine Requirements, delete Audi/VW 1.8 Turbo in its entirety.
In STU Spec Lines, Table B: Alternate Vehicle and Engine Requirements, Porsche 944 w/Max Displacement 1800, change as
follows:
Weight: "3050 Chart"
Notes: "VW/Audi 1.8L 35mm turbo engine permittedinlet restrictor required."

2025-01-01 STU Merger GT3 to STU

#37486 from Club Racing Board · Rule change · TB 25-01 (2025-01 Fastrack)

In STU, Table C, change STU-GT3 charge as follows:
"(Effective January 1, 2026) TABLE C: STU-GT3U"

2025-01-01 STU GT3 TCR Tire allowance

#37494 from Club Racing Board · Rule change · TB 25-01 (2025-01 Fastrack)

In STU, Table C, GT3 TCR, add to Notes the following:
"May run DOT approved tire with maximum section width of 275 with 100 pound weight adder. May not run A compound with
275."

2025-02-01 T1 T1 Parity Compared to GT4

#37170 from Tony Ave · Rule change · TB 25-02 (2025-02 Fastrack)

In T1 Spec Lines, change Weight and Restrictor Required as follows:
Mustang - Spec Line 1430
Weight: "3475 3600"
Restrictor Required: "65mm 60mm - FPR"
Corvette Spec Line 1190
Weight: "3450 3500"
Restrictor Required: "70mm 67mm - Flat Plate"
In T1 Spec Lines, delete Spec Line BMW # 1190 in its entirety.

2025-02-01 T1 Clarification of Request Approval #37273

#37399 from Mark Pfeffer · Rule change · TB 25-02 (2025-02 Fastrack)

In T1 Spec Lines, E46 M3 Spec Line # 1050, change Engine Notes as follows:
"Dinan Throttle Body #D760-3400 VAC Motorsports #VAC-TB-S54 allowed on the 3.250L."

2025-02-01 T1 C8 Corvette Facts

#37400 from Garry Crook · Rule change · TB 25-02 (2025-02 Fastrack)

In T1 Spec Lines, Chevrolet Corvette C8 (20- 23) - Includes Z51, Spec Line # 1210, change Min. Weight as follows:
"3600 3500"

2025-02-01 T1 Camaro Gen 5 Competitive Disadvantage

#37440 from Clark Nunes · Rule change · TB 25-02 (2025-02 Fastrack)

In T1 Spec Lines, Chevrolet Camaro Gen 5 (10-15) Including SS, Z28 Spec Line 1135, change Required Restrictor as follows:
"75mm 80mm - Flat Plate"

2025-02-01 T1 Tire Changes in the Rules for GT4

#37497 from Joe Rainey · Rule change · TB 25-02 (2025-02 Fastrack)

In T1-GT4 Spec Lines, Audi R8 GT4 Spec Line #4020, change Max Tire Size as follows:
"315 DOT, 305/645, or 30/65-18 (f), 33/68-18 (r) Non-DOT"

2025-03-01 STU BMW N54/N55 Engine Allowance Follow Up

#37447 from Martin Sarukhanyan · Rule change · TB 25-03 (2025-03 Fastrack)

In STU Spec Lines, Table A, classify BMW N54/N55 as follows:
STU Maximum Displacement
(cc's) Minimum Weight Notes
BMW N54/N55 3.0 Chart +3% (DI) Short blocks, heads, and intakes may be
freely swapped within these engine
designations. N54 twin turbo not allowed

2025-03-01 STU STU Mini Cooper pulley size clarification re: letter #36980

#37717 from Aaron Fitzsimmons · Rule change · TB 25-03 (2025-03 Fastrack)

In STU Spec Lines, Mini Cooper S SC, add to notes:
2100: "May run a 2.285 2.185 diameter pulley."

2025-03-01 T1 Correct and make new T1 BOP adjustments.

#37737 from Touring Committee · Rule change · TB 25-03 (2025-03 Fastrack)

In T1 Spec Lines, change Weight, Restrictor Required and/or Notes as follows:
Mustang - Spec Line 1430:
Restrictor Required: "60mm 65mm - FPR"
Mustang - Spec Line 1460:
Weight: "3425 3500"
Restrictor Required: "70mm - FPR"
Corvette Spec Line 1190:
Restrictor Required: "67mm 70mm - Flat Plate"

2025-03-01 STU Question About a Weight Modifier

#37782 from Peter St Pierre · Rule change · TB 25-03 (2025-03 Fastrack)

In STU Spec Lines, Table A, Honda K20C1 Turbo I4, add to Notes the following:
"The 3% DI weight adder does not need to be applied."

2025-03-01 STU Increase Minimum Weight

#37919 from Club Racing Board · Rule change · TB 25-03 (2025-03 Fastrack)

In STU Spec Lines, Table C: STU-GT3U, change Minimum Weight as follows:
"150 250 pounds"

2025-04-01 FE2 Driver Safety & Comfort

#37965 from Robey Clark · Rule change · TB 25-04 (2025-04 Fastrack)

In FE2, GCR section 9.1.1.G.2.E, add the following:
"g. Driver Safety and Comfort modifications to seat and controls for drivers with disabilities may be made only by approval. These
modifications must be reported to SCCA Enterprises and noted in the car logbook. The modifications are approved only for the
noted driver with disabilities. If the car is used by or sold to another driver, it must be returned to the previous standard
configuration."

2025-04-01 T1 Cadillac CT4-V Blackwing

#38003 from Touring Committee · Rule change · TB 25-04 (2025-04 Fastrack)

In T1 Spec Lines, classify Cadillac CT4-V Blackwing as follows:

A specification table follows in the original; it is not shown here.

2025-05-01 T1 Acceptance of Porsche 981 GT4 Clubsport into T1

#36664 from John Brown · Rule change · TB 25-05 (2025-05 Fastrack)

In T1-GT4 Spec Lines, classify Porsche 981 GT4 Clubsport as follows:

A specification table follows in the original; it is not shown here.

2025-05-01 T1 Request to Restore T1 Honda S2000 to Proper Weights

#37644 from David Mead · Rule change · TB 25-05 (2025-05 Fastrack)

In T1 Spec Lines, Honda S2000, Spec Line 1530, change as follows:
Minimum Weight: "2950 2900"
Chassis Notes: "This spec line is set to expire as of 12/31/2025 if not represented in Majors competition in 2025."

2025-05-01 T1 DCT Transmission in E46

#37964 from Matt Spicuzzi · Rule change · TB 25-05 (2025-05 Fastrack)

In T1 Spec Lines, BMW E46 M3, add to Chassis Notes the following:
SL# 1060: "BMW #GS7D36SG transmission permitted as an aftermarket sequential option."
SL# 1070: "BMW #GS7D36SG transmission permitted as an aftermarket sequential option."

Applies to BMW M3 on this page: Ian Barberi

2025-05-01 STU Wheel Size Inconsistency

#38018 from David Fiorelli · Rule change · TB 25-05 (2025-05 Fastrack)

In GCR, Section 9.1.4.1.F.1., change as follows:
"Wheels may not exceed 18 inches in diameter. or 8.0 inches in width for vehicles 2950 lbs. and under minimum allowed race
weight. Vehicles over 2850 minimum allowed race weight may use a 9 inch wide wheel. Cars equal to or less than 2,850 lbs.
minimum allowed race weight may not use wheels wider than 8 inches. Cars greater than 2,850 lbs. minimum allowed race
weight may not use wheels wider than 9 inches."

2025-05-01 T1 Reduce E92 M3 Minimum Weight to 3050

#38092 from Shane Brown · Rule change · TB 25-05 (2025-05 Fastrack)

In T1 Spec Lines, BMW M3 E92 (08-13), Spec Line 1100, change Min. Weight as follows:
"3350 3300"

2025-05-01 T1 Finalize Spec Line for T1 Darkhorse

#38106 from Touring Committee · Rule change · TB 25-05 (2025-05 Fastrack)

In T1 Spec Lines, Mustang Darkhorse R (Mustang Challenge) Spec Line- 4119, change as follows:
Tire size: "305 315 (f) 315(r)"
Performance Control: "TBD"
Min. Weight with driver (LBS): "10.5 (f) 11 (r) 3600"
Chassis Notes: "Must conform to Mustang Challenge Rules. Tires conforming to Mustang Challenge rules are permitted. **This
car is not eligible for the Runoffs until it has competed in 3 Super Tour events.**"

2025-05-01 STU Table C: STU-GT3U Clarification

#38268 from Club Racing Board · Rule change · TB 25-05 (2025-05 Fastrack)

In STU Spec Line, Table C: STU-GT3U, change as follows:
Minimum Weight: “Current GT3 race weight plus 250 225 pounds”
Notes: "DOT approved tire with maximum section width of 245. GT3 cars base wheel is a maximum of 15”x9”. 18”x9” wheels
allowd with a 3% weight addition. GT3 cars utilizing 15”x7” wheels are limited to a maximum section width of 225 with a 25
pound weight reduction"
"All GT3U (Majors and Runoffs) cars using up to 15"x7" wheels limited to 225 section width tires shall run at current GT3 race
weight plus 225lbs. All Gt3U cars shall run a DOT approved tire with a maximum section width of 245. GT3U cars are allowed
optional 15"x9" wheels with a 1.5% weight addition or up to 18"x9" wheels with a 3.0% weight addition to the total weight

2025-07-01 STU 2.8-3.2L N/A Engine Allowances

#38007 from Ben Slechta · Rule change · TB 25-07 (2025-07 Fastrack)

In GCR, Section 9.1.4.G.1, add the following:
"A maximum section width of 245 is permitted. Cars over 3150 lbs. may run a 275 tire with a 2% weight adder."

2025-07-01 STU 2006-2015 Mazda Miata Intake Manifold

#38422 from German Candelario Candelario · Rule change · TB 25-07 (2025-07 Fastrack)

In STU, Table A, Mazda MZR (LF, L3, L5), change Notes as follows:
"May use Goodwin Part # 61-2510 or Gato Performance Part #31972 Intake manifold . "

2025-07-01 STU Requesting Approval of the JDM Honda h23a

#38489 from Eric Fiest · Rule change · TB 25-07 (2025-07 Fastrack)

In STU, Table B, classify Honda JDM H23a as follows:
STU Maximum Displacement (cc's) Minimum Weight Notes
Honda JDM H23a 2259 Chart Must meet all ST engine regulations.

2025-08-01 STU STU-TCR Adjustments

#38723 from Club Racing Board · Rule change · TB 25-08 (2025-08 Fastrack)

In STU Spec Lines, Table C: STU-GT3U, GT3-TCR, change as follows: Remove the current TCR spec line and add the TCR spec lines
from GT3 that are being removed, adding the below to the notes.
"DOT approved tire with maximum section width of 245. May run DOT approved tire with maximum section width of 275 with
100 150 pound weight adder. May not run A-compound with 275. STU-TCR spitters and side valance must comply with
9.1.4.D.3.f. STU-TCR chassis ride height must comply with 9.1.4.1.A.1."

2025-08-01 STU Lotus Weight Reduction

#38772 from Club Racing Board · Rule change · TB 25-08 (2025-08 Fastrack)

In 9.1.2. GT2/ST Spec Lines, Lotus Evora GT4, change Weight as follows:
"2750 2700"
In STU Table B: Alternate Vehicle and Engine Allowances, change Weight as follows:
Lotus Elise Cup R: "2300 2250"
Lotus Elise SC/ Lotus Exige SC: "2300 2550
2500 2450"

2025-09-01 STU Lotus Weight Reduction E&O

#38919 from Club Racing Board · Rule change · TB 25-09 (2025-09 Fastrack)

In STU Table B: Alternate Vehicle and Engine Allowances, change Weight as follows:
Lotus Elise SC/ Lotus Exige SC: "2450 2250"

2025-10-01 FE2 FE & FE2 Bubble Tail

#38978 from Robey Clark · Rule change · TB 25-10 (2025-10 Fastrack)

In FE, GCR section 9.1.1.G.2.F.k, change as follows:
"Enterprises bubble tail P/N: WM138014 is allowed for FE and is the only configuration for FE2."

2025-11-01 STU Non-Homologated Engine Swaps - Specifically K24A2 w/ Honda CRZ

#38746 from William Rori · Rule change · TB 25-09 (2025-09 Fastrack)

In STU Spec Lines, Table B: Alternate Vehicle and Engine Allowances, Honda K24, change Weight as follows:
"(Effective 11/1/2025) Chart + 2%"

2025-12-01 STU Turbo Inlet Restrictor Table

#38961 from John Weisberg · Rule change · TB 25-12 (2025-12 Fastrack)

In GCR, Section 9.1.4.H.3, change chart as follows:

A specification table follows in the original; it is not shown here.

2025-12-01 STU 275 Tire Rule

#38983 from Peter Federlin · Rule change · TB 25-12 (2025-12 Fastrack)

In GCR, Section 9.1.4.G.1., change as follows:
"A maximum section width of 245 is permitted. Cars over 3150 lbs. may run a 275 tire with a 2% weight adder."

2025-12-01 T1 Keep S2000 Classification

#39344 from David Mead · Rule change · TB 25-12 (2025-12 Fastrack)

In T1 Spec Lines, Honda S2000, change as follows:

2025-12-01 STU STU Honda Engine weight penalty

#39375 from Super Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

In STU Spec Lines, Table B: Alternate Vehicle and Engine Allowances, change Minimum Weight as follows:
Honda K20: "Chart + 2%"
Honda K24: "Chart + 2%"

2025-12-01 T1 Correcting and updating T1 GT4 spec lines

#39394 from Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

In T1-GT4 Spec Lines, change as follows:

A specification table follows in the original; it is not shown here.

2025-12-01 T1 BOP adjustments to non GT4 T1 cars

#39406 from Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

In T1 Spec Lines, change as follows:
Spec Line # 1134
Required Restrictor: "61mm 70mm - Flat Plate"
Spec Line # 1140
Required Restrictor: "72mm - Flat Plate"
Spec Line # "1175"
Maximum Displ.: "L76 5967cc OEM"
Minimum Weight: "3250"

2025-12-01 T1 Remove T1 Spec Line

#39407 from Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

In T1 Spec Lines, BMW M3 E92 (08-13) Spec Line number 1090, delete Spec Line in its entirety.

2026-01-01 T1 additional T1 adjustment

#39520 from Touring Committee · Rule change · TB 26-01 (2026-01 Fastrack)

In T1 Spec Line, Spec line # 1132, change Restrictor as follows:
"70mm - Flat Plate"

2026-01-01 STU Request for Permission on Aftermarket Turbo Kit and Intake

#39529 from John Grim · Rule change · TB 26-01 (2026-01 Fastrack)

In STU Spec Lines, Table A: Alternate Vehicle and Engine Allowances, Mazda MZR (LF, L3, L5), change Notes as follows:
"Short blocks, heads, and intakes may be freely swapped within these engine designations. May use Goodwin Part # 61-
2510 or, Gato Performance Part #31972 or Jack Spania Racing 70 mm sheet-metal aluminum Intake manifold. Must use stock
throttle body or Acura part number 16400-PND-A17."
In STU Spec Lines, Table A: Alternate Vehicle and Engine Allowances, classify Mazda MZR (LF, L3, L5) Turbo as follows:
STU Maximum Displacement (cc's) Minimum Weight Notes
Mazda MZR (LF, L3,
L5) Turbo

2026-02-01 T1 LS1 into Corvette C6 Spec Line Request

#39716 from Danny Kellermeyerhttps://crbscca.com/secu · Rule change · TB 26-02 (2026-02 Fastrack)

In T1 Spec Lines, reinstate Spec Line # 1139, Chevrolet Corvette C6 (05-13) Includes Z51, GrandSport, Z06, Z06 Carbon, as
follows:
Max Displ: "LS1, LS6 OEM"
Min Weight: "3200"
Required Restrictor: "70mm"