T1 + SRF3 at Buttonwillow Raceway Park

2024-03-01 T1 9.1.9.1 T1 new category item/ line 26 rule to expire Jan 1 2023

#35411 from Geoffrey Hegel · Rule change · TB 24-03 (2024-03 Fastrack)

In T1 Spec Lines, classify Pontiac GTO 2006-2009 as Spec Line Number 1590 as follows:

A specification table follows in the original; it is not shown here.

2024-04-01 T1 Honda S2000

#35582 from Touring Committee · Rule change · TB 24-04 (2024-04 Fastrack)

In T1 Spec Lines, classify Honda S2000 as follows:

A specification table follows in the original; it is not shown here.

2024-05-01 T1 Please Expedite classing the C63 Mercedes

#35987 from Touring Committee · Rule change · TB 24-05 (2024-05 Fastrack)

In T1 Spec Lines, classify Mercedes AMG-C63 S (2023) as follows:

A specification table follows in the original; it is not shown here.

2024-06-01 SRF3 SRF3 Alternator Pulley Update In

#36095 from Robey Clark · Rule change · TB 24-06 (2024-06 Fastrack)

SFR3, GCR section 9.1.8.D.2.H.17, change as follows:
"Alternator Pulley: P/N G902130, or P/N G902130A, or P/N G902131 (six row). 12 11 oz minimum weight."

2024-08-01 SRF3 Update Rain Tire Rule and Hoosier Decal Placement

#36436 from Robey Clark · Rule change · TB 24-08 (2024-08 Fastrack)

In SRF, GCR section 9.1.8.D.1.X.f, change as follows:
"Wet:
Front – Hoosier P/N 46100 P185/60R13 H20 or W2
Rear – Hoosier P/N 46105 P205/60R13 H20 or W2
Ground clearance is 2.5” with driver as raced when P185/60R13 (H20 or W2) tires are used.
OR
Front – Hoosier P/N 46101 P185/65R13 W2
Rear – Hoosier P/N 46105 P205/60R13 W2

2024-09-01 SRF3 Update to Letter 36619 with new Hoosier Contingency Decal Info

#36624 from Robey Clark · Rule change · TB 24-09 (2024-09 Fastrack)

In SRF, GCR section 9.1.8.D.1.X.f.3, change as follows:
"Four (4) "Hoosier" decals are required in the following locations: Two (2) 11" X 3" decals on the vertical plane of the front nose
to the outside of the cooling opening on each side and two (2) 18" X 5" decals, one on each side of the engine cover or above the
rear wheel openings on the vertical plane. Hoosier decals are available, free of charge, from all Hoosier tire distributors including
SCCA Enterprises Per Hoosier's contingency program, three (3) decals are required to qualify for contingency awards. One (1)
decal must be located on each side of the car and one (1) decal must be visible on the front."

2024-10-01 SRF3 Update SRF3 Air Filter Rule

#36681 from Robey Clark · Rule change · TB 24-10 (2024-10 Fastrack)

In SRF, GCR section 9.1.8.D.2.H.23, change as follows:
"Air Filter: P/N WM301020 or K&N RC-9160"

2024-10-01 SRF3 Update SRF Brake Rotor Thickness

#36687 from Robey Clark · Rule change · TB 24-10 (2024-10 Fastrack)

In SRF, GCR section 9.1.8.D.1.X.g, change as follows:
"Brakes: Hawk Blue 9012 pads P/N 801993 must be used. Wilwood vented rotor P/N 800065 shall must be used as delivered with
no machining of any kind. Minimum thickness 12.20mm (0.481”) 13.25mm (0.522”)."

2024-10-01 SRF3 Hoosier Tire Decal Placement

#36739 from Robey Clark · Rule change · TB 24-10 (2024-10 Fastrack)

In SRF, GCR section 9.1.8.D.2.B, change as follows:
"Mandatory identification: "SRF3" near the side car numbers. "Hoosier" logo (4) on both sides front lower outer corners of the
nose and each side of the tail. Three (3) "Hoosier" logos, one (1) on each side of the car and one (1) on the center front of the car."

2024-12-01 T1 Changes to T1 Tires for GT4 and Other Cars

#35383 from Andrew Aquilante · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 GT4 Spec Lines, change Tire Size as follows:
Aston Martin Vantage AMR GT4 4010: "315 DOT, 305/660 Non-DOT"
Audi R8 GT4 - Spec Line #4020: "315 DOT, 305/645 Non-DOT"
BMW M4 GT4 - Spec Line #4030: "315 DOT, 305/660 Non-DOT"
Chevrolet Camaro GT4-R- Spec Line #4035: "315 DOT, 305/680 Non-DOT"
Ford Mustang GT4 - Spec Line #4040: "315 DOT, 315/680 Non-DOT"
Mclaren 570S GT4 - Spec Line #4050: "315 DOT, 305/645 Non-DOT"
Mercedes AMG GT4 - Spec Line #4060: "315 DOT, 305/660 Non-DOT"

2024-12-01 T1 G82 M4 GT4 inclusion in T1

#35864 from Denny Stripling · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 GT4 Spec Lines, SL#4030, change as follows:
Model: "BMW M4 GT4 (F82)"
Performance Control: "Gold power stick Red power stick"
In T1 GT4 Spec Lines, classify BMW M4 GT4 (G82) as follows:

A specification table follows in the original; it is not shown here.

2024-12-01 T1 Alt. Clutch Allowance

#36606 from Hugh Stewart · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 Spec Lines, SL# 1050, change add to Engine Notes the following:
"5.5 inch clutch permitted."

2024-12-01 T1 BOP Changes Need Updates

#36667 from Joe Rainey · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 GT4 Spec Lines, Spec Line 4020, change as follows:
Performance Control: Power level 2020, 44mm 45mm SRO compliant restrictor"
Min. Weight with driver (LBS): "3550 3400"

2024-12-01 T1 Request Ford Performance Darkhorse R in T1

#37136 from Christopher Childs · Rule change · TB 24-12 (2024-12 Fastrack)

In T1-Homologated Cars Spec Line, classify Mustang Darkhorse R (Mustang Challenge) as follows:
T1 – Homologated Cars

A specification table follows in the original; it is not shown here.

2024-12-01 T1 Car Mods for T1 Corvette under line item 1150

#37173 from Thomas Napolitano · Rule change · TB 24-12 (2024-12 Fastrack)

In GCR, Section 9.1.9.1.A.2,, add the following:
"It is permitted to roll under or flatten any interior lip on the wheel opening for tire clearance. Cars with plastic/composite
fenders may remove any interior wheel opening lip, but the resulting material edge shall be no thinner than the basic fender
material thickness. Non-metallic inner fender liners may be removed. Vents may be added to fenders."

2024-12-01 T1 Increased Bore Throttle Bodies for E46 M3 S54 Engine

#37273 from Mark Pfeffer · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 Spec Lines, E46 M3 Spec Line # 1050, add to Engine Notes the following:
"Dinan Throttle Body #D760-3400 allowed on the 3.250L."

2025-02-01 T1 T1 Parity Compared to GT4

#37170 from Tony Ave · Rule change · TB 25-02 (2025-02 Fastrack)

In T1 Spec Lines, change Weight and Restrictor Required as follows:
Mustang - Spec Line 1430
Weight: "3475 3600"
Restrictor Required: "65mm 60mm - FPR"
Corvette Spec Line 1190
Weight: "3450 3500"
Restrictor Required: "70mm 67mm - Flat Plate"
In T1 Spec Lines, delete Spec Line BMW # 1190 in its entirety.

2025-02-01 T1 Clarification of Request Approval #37273

#37399 from Mark Pfeffer · Rule change · TB 25-02 (2025-02 Fastrack)

In T1 Spec Lines, E46 M3 Spec Line # 1050, change Engine Notes as follows:
"Dinan Throttle Body #D760-3400 VAC Motorsports #VAC-TB-S54 allowed on the 3.250L."

2025-02-01 T1 C8 Corvette Facts

#37400 from Garry Crook · Rule change · TB 25-02 (2025-02 Fastrack)

In T1 Spec Lines, Chevrolet Corvette C8 (20- 23) - Includes Z51, Spec Line # 1210, change Min. Weight as follows:
"3600 3500"

2025-02-01 T1 Camaro Gen 5 Competitive Disadvantage

#37440 from Clark Nunes · Rule change · TB 25-02 (2025-02 Fastrack)

In T1 Spec Lines, Chevrolet Camaro Gen 5 (10-15) Including SS, Z28 Spec Line 1135, change Required Restrictor as follows:
"75mm 80mm - Flat Plate"

2025-02-01 T1 Tire Changes in the Rules for GT4

#37497 from Joe Rainey · Rule change · TB 25-02 (2025-02 Fastrack)

In T1-GT4 Spec Lines, Audi R8 GT4 Spec Line #4020, change Max Tire Size as follows:
"315 DOT, 305/645, or 30/65-18 (f), 33/68-18 (r) Non-DOT"

2025-03-01 T1 Correct and make new T1 BOP adjustments.

#37737 from Touring Committee · Rule change · TB 25-03 (2025-03 Fastrack)

In T1 Spec Lines, change Weight, Restrictor Required and/or Notes as follows:
Mustang - Spec Line 1430:
Restrictor Required: "60mm 65mm - FPR"
Mustang - Spec Line 1460:
Weight: "3425 3500"
Restrictor Required: "70mm - FPR"
Corvette Spec Line 1190:
Restrictor Required: "67mm 70mm - Flat Plate"

2025-04-01 SRF3 Driver Safety & Comfort

#37966 from Robey Clark · Rule change · TB 25-04 (2025-04 Fastrack)

In SRF, GCR section 9.1.8.D.1.D, add the following:
"f. Driver Safety and Comfort modifications to seat and controls for drivers with disabilities may be made only by approval. These
modifications must be reported to SCCA Enterprises and noted in the car logbook. The modifications are approved only for the
noted driver with disabilities. If the car is used by or sold to another driver, it must be returned to the previous standard
configuration."

2025-04-01 SRF3 Update SADEV transmission specs

#37992 from Club Racing Board · Rule change · TB 25-04 (2025-04 Fastrack)

In SRF, GCR section 9.1.8.D.2.K, change as follows:
"OR
SADEV-SRF3 6-Speed Sequential (beginning from Oct. 4, 2021 onward):
1st 12-36 3.0000 : 1
2nd 15-31 2.0667 : 1
3rd 18-28 1.5556 : 1
4th 22-28 1.2727 : 1
5th 24-26 1.0833 : 1

2025-04-01 T1 Cadillac CT4-V Blackwing

#38003 from Touring Committee · Rule change · TB 25-04 (2025-04 Fastrack)

In T1 Spec Lines, classify Cadillac CT4-V Blackwing as follows:

A specification table follows in the original; it is not shown here.

2025-05-01 T1 Acceptance of Porsche 981 GT4 Clubsport into T1

#36664 from John Brown · Rule change · TB 25-05 (2025-05 Fastrack)

In T1-GT4 Spec Lines, classify Porsche 981 GT4 Clubsport as follows:

A specification table follows in the original; it is not shown here.

2025-05-01 T1 Request to Restore T1 Honda S2000 to Proper Weights

#37644 from David Mead · Rule change · TB 25-05 (2025-05 Fastrack)

In T1 Spec Lines, Honda S2000, Spec Line 1530, change as follows:
Minimum Weight: "2950 2900"
Chassis Notes: "This spec line is set to expire as of 12/31/2025 if not represented in Majors competition in 2025."

2025-05-01 T1 DCT Transmission in E46

#37964 from Matt Spicuzzi · Rule change · TB 25-05 (2025-05 Fastrack)

In T1 Spec Lines, BMW E46 M3, add to Chassis Notes the following:
SL# 1060: "BMW #GS7D36SG transmission permitted as an aftermarket sequential option."
SL# 1070: "BMW #GS7D36SG transmission permitted as an aftermarket sequential option."

Applies to BMW M3 on this page: Ian Barberi

2025-05-01 T1 Reduce E92 M3 Minimum Weight to 3050

#38092 from Shane Brown · Rule change · TB 25-05 (2025-05 Fastrack)

In T1 Spec Lines, BMW M3 E92 (08-13), Spec Line 1100, change Min. Weight as follows:
"3350 3300"

2025-05-01 T1 Finalize Spec Line for T1 Darkhorse

#38106 from Touring Committee · Rule change · TB 25-05 (2025-05 Fastrack)

In T1 Spec Lines, Mustang Darkhorse R (Mustang Challenge) Spec Line- 4119, change as follows:
Tire size: "305 315 (f) 315(r)"
Performance Control: "TBD"
Min. Weight with driver (LBS): "10.5 (f) 11 (r) 3600"
Chassis Notes: "Must conform to Mustang Challenge Rules. Tires conforming to Mustang Challenge rules are permitted. **This
car is not eligible for the Runoffs until it has competed in 3 Super Tour events.**"

2025-09-01 SRF3 SRF Rule Updates

#38853 from Robey Clark · Rule change · TB 25-09 (2025-09 Fastrack)

Effective 9/1/25 in SRF, GCR section 9.1.8.D.1.V.ff, add the following:
"SRF3 Oil Cooler, P/N G480503 may be used as mounted per the GEN3 Assembly Manual. No fan permitted for SRF. HD Oil
Cooler kit P/N G1148500 may be used as mounted per the GEN3 Conversion Manual."
Effective 9/1/25 in SRF, GCR section 9.1.8.D.X.g, change as follows:
"Brakes: Hawk Blue 9012 pads P/N 801993 must be used. Wilwood vented rotor P/N 800065 must be used as delivered with no
machining of any kind. Minimum thickness 13.25mm (0.522”). The Renault Alliance solid front rotors may not be used. Rubber
caliper bushings may be replaced with bronze bushings P/N 1196185 or P/N 1196185. Original caliper pistons may be replaced
with vented caliper piston P/N 1196184; no other modification allowed. Wilwood caliper with bracket universal fit P/N 800038

2025-10-01 SRF3 Add HD Oil Cooler

#38979 from Robey Clark · Rule change · TB 25-10 (2025-10 Fastrack)

In SRF, GCR section 9.1.8.D.1.V.ff, change as follows:
"SRF3 Oil Cooler, P/N G480503 or HD Oil Cooler P/N G1148500 may be used as mounted per the GEN3 Assembly Manual. No fan
permitted for SRF. HD Oil Cooler kit P/N G1148500 may be used as mounted per the GEN3 Conversion Manual."

2025-12-01 T1 Keep S2000 Classification

#39344 from David Mead · Rule change · TB 25-12 (2025-12 Fastrack)

In T1 Spec Lines, Honda S2000, change as follows:

2025-12-01 T1 Correcting and updating T1 GT4 spec lines

#39394 from Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

In T1-GT4 Spec Lines, change as follows:

A specification table follows in the original; it is not shown here.

2025-12-01 T1 BOP adjustments to non GT4 T1 cars

#39406 from Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

In T1 Spec Lines, change as follows:
Spec Line # 1134
Required Restrictor: "61mm 70mm - Flat Plate"
Spec Line # 1140
Required Restrictor: "72mm - Flat Plate"
Spec Line # "1175"
Maximum Displ.: "L76 5967cc OEM"
Minimum Weight: "3250"

2025-12-01 T1 Remove T1 Spec Line

#39407 from Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

In T1 Spec Lines, BMW M3 E92 (08-13) Spec Line number 1090, delete Spec Line in its entirety.

2026-01-01 T1 additional T1 adjustment

#39520 from Touring Committee · Rule change · TB 26-01 (2026-01 Fastrack)

In T1 Spec Line, Spec line # 1132, change Restrictor as follows:
"70mm - Flat Plate"

2026-02-01 T1 LS1 into Corvette C6 Spec Line Request

#39716 from Danny Kellermeyerhttps://crbscca.com/secu · Rule change · TB 26-02 (2026-02 Fastrack)

In T1 Spec Lines, reinstate Spec Line # 1139, Chevrolet Corvette C6 (05-13) Includes Z51, GrandSport, Z06, Z06 Carbon, as
follows:
Max Displ: "LS1, LS6 OEM"
Min Weight: "3200"
Required Restrictor: "70mm"