BoP Lab / Michelin Raceway Road Atlanta

FC vs SMX vs SM vs P2 pace at Michelin Raceway Road Atlanta

Quickest here: FC 1:23.672 Brandon Dixon, Atlanta Region SCCA Hoosier Super Tour @ Michelin Raceway Road Atlanta race · SMX 1:24.667 Tyler Gonzales, Atlanta Region SCCA Hoosier Super Tour @ Michelin Raceway Road Atlanta race · SM 1:41.864 Travis Wiley, Atlanta Region Hoosier SCCA Super Tour @ Michelin Raceway Road Atlanta race · P2 1:22.533 Lucian Pancea, Atlanta Region Hoosier SCCA Super Tour @ Michelin Raceway Road Atlanta qualifying

Lap times% of FC

FCSMXSMP2solid race · dashed qualifying · slower is lower

FCSMXSMP2solid race · dashed qualifying · each class's best lap as a share of FC's at the same event (the reference class, changeable above); 100% is level, higher is quicker

	Event	FC			SMX					SM					P2
	Event	Qual best	Race best	Trap	Qual best	Race best	Trap	vs FC	% of FC	Qual best	Race best	Trap	vs FC	% of FC	Qual best	Race best	Trap	vs FC	% of FC
	Atlanta Region SCCA Hoosier Super Tour @ Michelin Raceway Road Atlanta ST26MAR062026-03-06	1:23.854Brandon Dixon · fastest of 3 · top 3 within 8.1s-5.116s (-5.75%)	1:23.672Brandon Dixon · fastest of 3 · top 3 within 9.3s-6.776s (-7.49%)	138.7Brandon Dixon+12.1 mph (+9.6%)	1:38.517Jarrett Jones · fastest of 20 · top 5 within 0.7s-0.145s (-0.15%)	1:24.667Tyler Gonzales · fastest of 21 · top 5 within 15.4s-14.098s (-14.27%)	120.7Elivan Goulart+3.7 mph (+3.2%)	+0.995squal +14.663s	101.2%qual 117.5%	1:42.324Skyler Cottrell · fastest of 52 · top 5 within 0.4s-0.524s (-0.51%)	1:42.611Charles Mactutus · fastest of 51 · top 5 within 0.2s-0.014s (-0.01%)	112.2James Newell+5.2 mph (+4.9%)	+18.939squal +18.470s	122.6%qual 122.0%
9 rule changes (FC: 2, SMX: 4, SM: 3)1 weight · 8 wording · FC USF2000 Tube Frame may use Hewland LD200 4-speed H-pattern as alternative to Hewland JL-200 5-speed sequential. · FC F2000 Metrik ZF2 minimum weight reduced to 1220 lbs. · SMX drivers must submit data acquisition files on time or face suspension and $250 fine. · SMX penalty language clarified: level 1 and 3 infractions may carry $1,000 fine; level 2 and 4 may carry $500 fine. · SMX drivers must submit data acquisition files on time or face suspension and $250 fine. · SMX penalty language clarified: level 1 and 3 infractions may carry $1,000 fine; level 2 and 4 may carry $500 fine. · SM cars limited to one set of Hoosier SM 7.5 P205/50/ZR17 per Super Tour event weekend for dry sessions. · SMX Toyo RR P235/40/ZR17 tire rules clarified: one set per weekend, marking after first session, damage replacement procedures revised. · SMX data submission deadline extended from 30 to 60 minutes after each timed session.showhide 2026-01-01 FC F2000 MZR Spec Line Clarity/Revision Requested #38927wordingwordingFC USF2000 Tube Frame may use Hewland LD200 4-speed H-pattern as alternative to Hewland JL-200 5-speed sequential. 2026-01-01 FC Adjust F2000 Metrik ZF2 weight #39612weight -20 lbsfasterFC F2000 Metrik ZF2 minimum weight reduced to 1220 lbs. 2025-06-01 SM SMX Data Submission - Penalties #38248wordingwordingSMX drivers must submit data acquisition files on time or face suspension and $250 fine. 2025-06-01 SM Committee) SMX Penaly Clarification updated language #38337wordingwordingSMX penalty language clarified: level 1 and 3 infractions may carry $1,000 fine; level 2 and 4 may carry $500 fine. 2025-06-01 SMX SMX Data Submission - Penalties #38248wordingwordingSMX drivers must submit data acquisition files on time or face suspension and $250 fine. 2025-06-01 SMX Committee) SMX Penaly Clarification updated language #38337wordingwordingSMX penalty language clarified: level 1 and 3 infractions may carry $1,000 fine; level 2 and 4 may carry $500 fine. 2025-05-01 SM Clarify Tire Marking Regs #38005wordingwordingSM cars limited to one set of Hoosier SM 7.5 P205/50/ZR17 per Super Tour event weekend for dry sessions. 2025-05-01 SMX Clarify Tire Marking Regs #38004wordingwordingSMX Toyo RR P235/40/ZR17 tire rules clarified: one set per weekend, marking after first session, damage replacement procedures revised. 2025-05-01 SMX SMX Data Submission Timeframe #38039wordingwordingSMX data submission deadline extended from 30 to 60 minutes after each timed session.
	Atlanta Region SCCA Hoosier Super Tour @ Michelin Raceway Road Atlanta ST25MAR072025-03-07	1:28.970Eric Presbrey · fastest of 2+3.675s (+4.31%)	1:30.448Carter Sheets · fastest of 2+4.896s (+5.72%)	126.6Carter Sheets-3.0 mph (-2.3%)	1:38.662Camden Gruber · fastest of 30 · top 5 within 0.2s-0.302s (-0.31%)	1:38.765Skyler Cottrell · fastest of 30 · top 5 within 0.5s-1.159s (-1.16%)	117.0Cam Ebben+1.0 mph (+0.9%)	+8.317squal +9.692s	109.2%qual 110.9%	1:42.848Sean Noonan · fastest of 35 · top 5 within 0.2s+0.228s (+0.22%)	1:42.625Sean Noonan · fastest of 33 · top 5 within 0.6s-0.370s (-0.36%)	107.0Sean Noonan+1.8 mph (+1.7%)	+12.177squal +13.878s	113.5%qual 115.6%
16 rule changes (FC: 3, SMX: 5, SM: 5, P2: 3)2 weight · 1 cars added · 1 tyres & wheels · 12 wording · P2 2000cc Pinto engine car minimum weight set to 1335 lbs. · SMX allows OE instrument cluster relocation for aftermarket dash mounting, with wiring re-routed only; alternate gauges now permitted. · SMX allows OE instrument cluster relocation for aftermarket dash mounting, with wiring re-routed only; alternate gauges now permitted. · FC tire limit reduced to four dry and four wet for Regional/Major/Super Tour, eight for Runoffs. · FF and FC cars with sequential gearbox must add 10 lbs. to minimum weight, down from 25 lbs. · SMX Spec MX-5 camera requirement wording changed; non-functioning recorder now grounds for penalty or disqualification. · SMX Spec MX-5 must run latest AIM Data Logger Spec MX-5 ECU Protocol; wording clarification for technical compliance. · SMX Mazda Miata OE versus OEM definitions clarified in GCR Section 9.1.7.1. · SM and SMX shifter bushing rules clarified: alternate bushing at shift lever bottom now allowed. · SMX Spec MX-5 camera requirement wording changed; non-functioning recorder now grounds for penalty or disqualification. · SMX Spec MX-5 must run latest AIM Data Logger Spec MX-5 ECU Protocol; wording clarification for technical compliance. · SMX Mazda Miata OE versus OEM definitions clarified in GCR Section 9.1.7.1. · SM and SMX shifter bushing rules clarified: alternate bushing at shift lever bottom now allowed. · P2 Spec ECU engine modifications clarified: oil system, ECU, and exhaust unrestricted only. · P2 FIA Group CN spec notes clarified: Series changed to Challenge, documentation requirement moved to online link. · FC adds F2000 Metrik ZF2 with Ford Zetec engine and four-piston Brembo calipers as spec-line car.showhide 2024-12-01 P2 2000 cc Pinto Engine Car Weight #37187weightslowerP2 2000cc Pinto engine car minimum weight set to 1335 lbs. 2024-12-01 SM E&O SMX Regs 9.1.7.1.D.5.u-.w #37070wordingwordingSMX allows OE instrument cluster relocation for aftermarket dash mounting, with wiring re-routed only; alternate gauges now permitted. 2024-12-01 SMX E&O SMX Regs 9.1.7.1.D.5.u-.w #37070wordingwordingSMX allows OE instrument cluster relocation for aftermarket dash mounting, with wiring re-routed only; alternate gauges now permitted. 2024-11-01 FC 9.1.1.10.h. FC Tire Rule #36533tyres & wheelsslowerFC tire limit reduced to four dry and four wet for Regional/Major/Super Tour, eight for Runoffs. 2024-11-01 FC Change FF/FC Weight with Sequential Gearbox #36651weightfasterFF and FC cars with sequential gearbox must add 10 lbs. to minimum weight, down from 25 lbs. 2024-09-01 SM SMX Camera Rule Correction #36496wordingwordingSMX Spec MX-5 camera requirement wording changed; non-functioning recorder now grounds for penalty or disqualification. 2024-09-01 SM Committee) AIM ECU Protocol #36556wordingwordingSMX Spec MX-5 must run latest AIM Data Logger Spec MX-5 ECU Protocol; wording clarification for technical compliance. 2024-09-01 SM Committee) OE versus OEM Definitons #36608wordingwordingSMX Mazda Miata OE versus OEM definitions clarified in GCR Section 9.1.7.1. 2024-09-01 SM Committee) Shifter Bushing #36611wordingwordingSM and SMX shifter bushing rules clarified: alternate bushing at shift lever bottom now allowed. 2024-09-01 SMX SMX Camera Rule Correction #36496wordingwordingSMX Spec MX-5 camera requirement wording changed; non-functioning recorder now grounds for penalty or disqualification. 2024-09-01 SMX Committee) AIM ECU Protocol #36556wordingwordingSMX Spec MX-5 must run latest AIM Data Logger Spec MX-5 ECU Protocol; wording clarification for technical compliance. 2024-09-01 SMX Committee) OE versus OEM Definitons #36608wordingwordingSMX Mazda Miata OE versus OEM definitions clarified in GCR Section 9.1.7.1. 2024-09-01 SMX Committee) Shifter Bushing #36611wordingwordingSM and SMX shifter bushing rules clarified: alternate bushing at shift lever bottom now allowed. 2024-05-01 P2 CN Spec ECU #35835wordingwordingP2 Spec ECU engine modifications clarified: oil system, ECU, and exhaust unrestricted only. 2024-05-01 P2 E&O - Correct FIA Group CN spec line notes #35900wordingwordingP2 FIA Group CN spec notes clarified: Series changed to Challenge, documentation requirement moved to online link. 2024-04-01 FC Four Pot Calipers #35481cars addedcars addedFC adds F2000 Metrik ZF2 with Ford Zetec engine and four-piston Brembo calipers as spec-line car.
	Atlanta Region Hoosier SCCA Super Tour @ Michelin Raceway Road Atlanta ST24MAR082024-03-08	1:25.295Brandon Dixon · fastest of 7 · top 5 within 4.5s+0.613s (+0.72%)	1:25.552Tim Minor · fastest of 6 · top 5 within 4.9s-1.803s (-2.06%)	129.6Tim Minor-7.1 mph (-5.2%)	1:38.964Michael Tinis · fastest of 33 · top 5 within 0.5s	1:39.924Will Robusto · fastest of 33 · top 5 within 1.1s	116.0Jack Murchison	+14.372squal +13.669s	116.8%qual 116.0%	1:42.620Danny Steyn · fastest of 47 · top 5 within 0.4s+0.001s (+0.00%)	1:42.995Charles Mactutus · fastest of 46 · top 5 within 0.1s+0.442s (+0.43%)	105.2Tyler Brown-6.9 mph (-6.2%)	+17.443squal +17.325s	120.4%qual 120.3%	1:24.228Lucian Pancea · fastest of 4 · top 4 within 5.2s+1.695s (+2.05%)	1:26.233Sherman Chao · fastest of 4 · top 4 within 17.9s+2.429s (+2.90%)	134.0Lucian Pancea-12.5 mph (-8.5%)	+0.681squal -1.067s	100.8%qual 98.7%
10 rule changes (FC: 3, P2: 7)3 engine · 1 cars added · 6 wording · F600 Rotax 494, 493, 593 engines now require single expansion chamber and pull starter; electric starter optional. · P2 AMAC modified engine range clarified to 2008 and older stock engines only, restrictor 38mm, weight 1025 lbs. · P2 Suzuki GSX-R1000 07/08 engine crankcase may swap to GSX-S1000 16/19 part #11301-04840. · P2 Table 1 corrects engine date ranges and brand specifications for Stock and Modified engines across multiple car models. · FC tire marking rule clarified: four dry and wet tires for Regionals, eight each for Runoffs; damaged tire replacement procedures revised. · USF2000 Van Diemen with Mazda MZR LF-DE 2.0L added as spec line car in FC; removed from FX. · P2 side body height requirement clarified: outermost surface between wheel openings must equal front axle centerline height. · P2 closed cockpit single seat cars now prohibited unless specifically allowed in Table 1. · P2 engine table wording updated; redundant effective date language removed. · P2 motorcycle engines: 2011+ Kawasaki restrictor reduced to 34mm, minimum weight raised to 1100 lbs; 2009+ other brands weight raised to 1100 lbs.showhide 2024-01-01 FC Please correct omitted punctuation #34890engineengineF600 Rotax 494, 493, 593 engines now require single expansion chamber and pull starter; electric starter optional. 2024-01-01 P2 E&O - Clarify B.1 modified engine range in AMAC spec lines #35225wordingwordingP2 AMAC modified engine range clarified to 2008 and older stock engines only, restrictor 38mm, weight 1025 lbs. 2024-01-01 P2 Replacement Engine Crankcase for 07/08 Suzuki GSX-R1000 Engines #35340engineunclearP2 Suzuki GSX-R1000 07/08 engine crankcase may swap to GSX-S1000 16/19 part #11301-04840. 2023-12-01 P2 Correct Table 1 for Engine Date Range Specifications #35182wordingwordingP2 Table 1 corrects engine date ranges and brand specifications for Stock and Modified engines across multiple car models. 2023-07-01 FC Review FC Runoffs Tire Marking Rule #34274wordingwordingFC tire marking rule clarified: four dry and wet tires for Regionals, eight each for Runoffs; damaged tire replacement procedures revised. 2023-06-01 FC USF2000 Van Diemen with Mazda MZR LF-DE 2.0L in FC #34329cars addedcars addedUSF2000 Van Diemen with Mazda MZR LF-DE 2.0L added as spec line car in FC; removed from FX. 2023-05-01 P2 Clarify minimum side body height requirement #34143wordingwordingP2 side body height requirement clarified: outermost surface between wheel openings must equal front axle centerline height. 2023-05-01 P2 Clarify closed cockpit single seat car allowance #34144wordingwordingP2 closed cockpit single seat cars now prohibited unless specifically allowed in Table 1. 2023-04-01 P2 Remove redundant effective date language and update engine table #34012wordingwordingP2 engine table wording updated; redundant effective date language removed. 2023-04-01 P2 E&O - Correct dimensional equivalents #34038engineslowerP2 motorcycle engines: 2011+ Kawasaki restrictor reduced to 34mm, minimum weight raised to 1100 lbs; 2009+ other brands weight raised to 1100 lbs.
	Atlanta Region Hoosier SCCA Super Tour @ Michelin Raceway Road Atlanta ST23MAR102023-03-10	1:24.682Brandon Dixon · fastest of 5 · top 5 within 8.8s+0.469s (+0.56%)	1:27.355Brandon Dixon · fastest of 3 · top 3 within 4.6s+3.270s (+3.89%)	136.6Brandon Dixon-3.7 mph (-2.7%)						1:42.619Charles Mactutus · fastest of 48 · top 5 within 0.7s-0.195s (-0.19%)	1:42.553Charles Mactutus · fastest of 47 · top 5 within 0.4s+0.689s (+0.68%)	112.2Jonathan Neudorf-1.3 mph (-1.2%)	+15.198squal +17.937s	117.4%qual 121.2%	1:22.533Lucian Pancea · fastest of 4 · top 4 within 4.2s-1.480s (-1.76%)	1:23.804Lucian Pancea · fastest of 4 · top 4 within 4.6s+0.733s (+0.88%)	146.5Lucian Pancea-3.5 mph (-2.4%)	-3.551squal -2.149s	95.9%qual 97.5%
11 rule changes (FC: 2, SM: 2, P2: 7)1 cars added · 1 engine · 1 weight · 8 wording · FC/FF PE3-8400 ECU monitor firmware version reduced from V3.04.50 to V3.04.35. · Sebeco NP01-EVO and Elan NP01 Mazda 2.0L MZR added to P2, 1600 lb minimum, no restrictor required. · P2 Radical SR3/SR4/Cup/Club Sport/Pro-Sport/PR6 removes assisted shifting requirement across all spec lines. · P2 chassis rules clarified to allow composite materials in non-fully-composite construction; anti-intrusion panel attachment standardized; Stohr and converted F600 cars added with specific allowances. · Unable to summarize: the change to P2 Engine Table Spec Line B.1 is not detailed in the provided text. · SM Mazda MX-5 Miata 01-05 weight increases to 2450 lbs, or 2465 with alternate bore. · FC Ford Zetec Performance Electronics ECU model renamed PE-3 to PE3-8400; Monitor firmware updated to V3.04.50. · P2 chassis construction rules clarified: fully composite or partially composite requiring composite for mobility allowed; partial composite must roll without composite parts. · P2 classification wording cleaned up in GCR section 9.1.8.C and Contents. · P2 Oldsmobile cam rules clarify aftermarket manufacturer requirements; wording only. · SM Majors must run authorized Penske shock and mount; Regional competitors' requirement eligibility clarified.showhide 2023-01-01 FC E&O 9.1.1.B.16.j #33634wordingunclearFC/FF PE3-8400 ECU monitor firmware version reduced from V3.04.50 to V3.04.35. 2023-01-01 P2 Request to Classify Sebeco NP01 #33378cars addedcars addedSebeco NP01-EVO and Elan NP01 Mazda 2.0L MZR added to P2, 1600 lb minimum, no restrictor required. 2023-01-01 P2 Radical spec line clarifications #33485wordingwordingP2 Radical SR3/SR4/Cup/Club Sport/Pro-Sport/PR6 removes assisted shifting requirement across all spec lines. 2023-01-01 P2 E&O original class intent #33519wordingwordingP2 chassis rules clarified to allow composite materials in non-fully-composite construction; anti-intrusion panel attachment standardized; Stohr and converted F600 cars added with specific allowances. 2023-01-01 P2 Update Engine Table Spec Line B.1 #33608engineunclearUnable to summarize: the change to P2 Engine Table Spec Line B.1 is not detailed in the provided text. 2023-01-01 SM BOP for NB1 and NB2 #32309weightslowerSM Mazda MX-5 Miata 01-05 weight increases to 2450 lbs, or 2465 with alternate bore. 2022-07-01 FC Add Specification to Performance Electronics ECU for Ford Zetec #32761wordingwordingFC Ford Zetec Performance Electronics ECU model renamed PE-3 to PE3-8400; Monitor firmware updated to V3.04.50. 2022-05-01 P2 E&O Clarification of Chassis Construction Requirements #32469wordingwordingP2 chassis construction rules clarified: fully composite or partially composite requiring composite for mobility allowed; partial composite must roll without composite parts. 2022-05-01 P2 Clean up P2 wording #32525wordingwordingP2 classification wording cleaned up in GCR section 9.1.8.C and Contents. 2022-04-01 P2 After Market to Aftermarket #32373wordingwordingP2 Oldsmobile cam rules clarify aftermarket manufacturer requirements; wording only. 2022-04-01 SM Update GCR Section 9.1.7.3.A.1. #32217wordingwordingSM Majors must run authorized Penske shock and mount; Regional competitors' requirement eligibility clarified.
	Atlanta Region Hoosier SCCA Super Tour @ Michelin Raceway Road Atlanta ST22MAR122022-03-12	1:24.213Tim Minor · fastest of 6 · top 5 within 4.9s	1:24.085Tim Minor · fastest of 5 · top 5 within 4.3s	140.4Tim Minor						1:42.814Connor Zilisch · fastest of 60 · top 5 within 0.3s	1:41.864Travis Wiley · fastest of 60 · top 5 within 0.7s	113.5Junior Brock	+17.779squal +18.601s	121.1%qual 122.1%	1:24.013Robert Iversen · fastest of 6 · top 5 within 3.1s	1:23.071Robert Iversen · fastest of 6 · top 5 within 4.0s	150.1Robert Iversen	-1.014squal -0.200s	98.8%qual 99.8%
48 earlier rule changes on record, in force before Atlanta Region Hoosier SCCA Super Tour @ Michelin Raceway Road Atlanta (from 2019)7 induction · 4 cars added · 4 engine · 4 weight · 3 aero · 1 suspension & brakes · 24 wording · 1 other · P2 adds Beasley B2 spec line with 1350 lbs, Mazda 12A, 40.5mm venturi, 16.5in wing. · P2 wing specs correct terminology from 'cord' to 'chord' for 16.5in single or dual element wings. · P2 Converted F5 cars reclassified as Converted F500 cars; suspension must comply with F500 requirements, minimum width 55 inches. · P2 motorcycle engines increase to 1505cc max, two-stroke to 1205cc max; automotive engines gain 50 lbs minimum weight to 1350. · FC chassis/frame section reorganized: anti-intrusion panels between main tubes clarified, suspension mounting restrictions strengthened, firewall requirements reworded. · P2 Control Area definition narrowed; aerodynamic attachments and vertical structures like turning vanes now prohibited. · FC Zetec ECU requirements clarified: Pectel T2 or Performance PE-3 required with specific communications ports and SCCA tune-file/map. · P2 Engine Table Spec Line B.1 changed effective 1-1-22, details not provided in excerpt. · P2 Control Area definition clarified: floor extensions and aerodynamic attachments on bottom or top side now explicitly included. · FC composite anti-intrusion panels of non-uniform thickness limited to eight fasteners per side. · FC tire marking rules clarified: competitor responsible for declaring, marking, and logging tires with Tech before qualifying or race. · P2 CN Honda K20A-FD2 engine rebuild rules clarified: machining prohibition replaced with specific restrictions on balancing, porting, polishing, valve jobs, cylinder honing. · Converted F5 cars in P2 minimum width reduced to 55 inches from F5 spec. · P2 clarifies minimum body width requirement between front and rear wheels for Ralt RT40, RT41, Swift 008, 014. · P2 tonneau covers now allowed to meet minimum dimensions; equipment attachment requirements clarified. · P2 multiple chassis models remove effective dates from Table 1 specifications. · P2 engines limited to 4 valves per cylinder maximum across all three spec lines. · SM adds procedures for testing obsolete part replacements and BOP updates in sanctioned events with CRB approval. · FC Pinto engine loses 10 lbs to 1190; Pinto aluminum head loses 10 lbs to 1190; Zetec loses 10 lbs to 1210. · P2 adds new spec line for 2-cycle 3-cylinder engine up to 820cc with 10 front and 14-15 rear wheel width. · P2 Honda K20A-FD2 intake restrictor reduced from 55mm to 50mm, making cars faster. · FC: Pectel T2 and Performance PE-3 ECU maps clarified; SCCA Club or 2013 Pro map required. · SM aftermarket radiators must mount in original location, maintain core plane, require no body modifications, block openings, keep one OEM fan in stock location; 1990-1997 cars may install upper radiator seal NA75-50-OK7A. · P2 rear wing requirements clarified: standard wing 6×12 inches, end plates 14-inch square; alternate 110cm width wing 9×18 inches, end plates 14×18 inches. · FC Zetec engine minimum weight increases 20 lbs to 1220 lbs. · SM rear brake calipers may use single bracket under upper retaining bolt to prevent pin failure. · Elan NP01 classified in P2 Table 1 as Spec Line car with 2000cc displacement and P2 Engine Table restrictor. · P2 Enterprises Sports Racer adds 55mm flat plate intake restrictor Part # WM303013 as alternative to SIR. · P2 Enterprise Sports Racer 2.3L engine now requires SIR or Flat Plate restrictor sized in 0.5mm increments. · P2 fly-by-wire throttle control wording clarified: stock ECUs with drive-by-wire must activate original throttle shaft mechanism. · P2 adds BMW to motorcycle-based engine options in 4-cycle line alongside Kawasaki, Suzuki, Yamaha, Honda. · FC Zetec connecting rods now allow Eagle #CRS5483F3D in addition to original Ford. · FC adds Mahle #930169439 piston as alternate option to existing Ford, Sealed Power, and United Engine choices. · P2 Honda K20A-FD2 non-composite chassis must use 55mm flat plate intake restrictor at 1500 lbs minimum weight. · P2 motorcycle engines: Stock restrictor 36.5mm to 35mm, modified 37.5mm to 34mm; B.5 restrictor 37.5mm to 33mm. All weights increase 25 lbs. · P2 cars limited to power application on maximum two wheels, effective 2019-07-01. · P2 Enterprise minimum weight increases to 1375 lbs; peak horsepower of sealed ESR engine reduced per CRB specification. · FC Wiseco piston and Crower connecting rod part numbers updated; minimum weight 976 grams. · P2 stock engine restrictor shrinks to 35.0mm and weight rises to 1025 lbs; modified engine restrictor to 34.0mm, weight to 1125 lbs; line B.5 restrictor to 33.0mm, weight to 1185 lbs. · P2 Line A.1 restrictor reduced from 40mm to 38mm. · SM fuel pump and filter must be Mazda or OEM Equivalent part. · SM 1999-2000 model year cars may use replacement Mazda ECU and injector harnesses, unmodified. · SM electrical rules reorganized and clarified; alternator external regulation now prohibited except via OEM ECU/kill switch. · SM removes tire tread protrusion beyond fender opening requirement from GCR 9.1.7.C.5. · FC Wiseco piston and Crower connecting rod assembly minimum weight increases from 555 to 976 grams. · P2 Spec Line cars now allow 1345cc Hayabusa stock engines at 1050 lbs with 30mm restrictor. · P2 Group CN Honda K20A-FD2 55mm restrictor implementation delayed from 1/1/2019 to 3/1/2019. · P2 Honda K20A-FD2 in CN chassis must use stock intake manifold with 64mm throttle body and 55mm restrictor at 1500 lbs minimum weight.showhide 2022-03-01 P2 Add spec line for Beasley B2 #32147cars addedcars addedP2 adds Beasley B2 spec line with 1350 lbs, Mazda 12A, 40.5mm venturi, 16.5in wing. 2022-03-01 P2 E&O Table 1 spec line wing terminology #32148wordingwordingP2 wing specs correct terminology from 'cord' to 'chord' for 16.5in single or dual element wings. 2022-03-01 P2 E&O class name #32196wordingwordingP2 Converted F5 cars reclassified as Converted F500 cars; suspension must comply with F500 requirements, minimum width 55 inches. 2022-02-01 P2 E&O Engine section #31969enginefasterP2 motorcycle engines increase to 1505cc max, two-stroke to 1205cc max; automotive engines gain 50 lbs minimum weight to 1350. 2022-01-01 FC Clean up Chassis/Frame section #31867wordingwordingFC chassis/frame section reorganized: anti-intrusion panels between main tubes clarified, suspension mounting restrictions strengthened, firewall requirements reworded. 2022-01-01 P2 E&O letter #31539 – Control Area definition #31783aeroslowerP2 Control Area definition narrowed; aerodynamic attachments and vertical structures like turning vanes now prohibited. 2021-12-01 FC Clarify Zetec ECU requirements #31554wordingwordingFC Zetec ECU requirements clarified: Pectel T2 or Performance PE-3 required with specific communications ports and SCCA tune-file/map. 2021-12-01 P2 BoP adjustment effective 1-1-22 #31538wordingunclearP2 Engine Table Spec Line B.1 changed effective 1-1-22, details not provided in excerpt. 2021-12-01 P2 E&O clarification of "Control Area" definition #31539wordingwordingP2 Control Area definition clarified: floor extensions and aerodynamic attachments on bottom or top side now explicitly included. 2021-11-01 FC Clarify composite anti-intrusion panel language #31426wordingwordingFC composite anti-intrusion panels of non-uniform thickness limited to eight fasteners per side. 2021-11-01 FC Clarify tire marking requirements #31455wordingwordingFC tire marking rules clarified: competitor responsible for declaring, marking, and logging tires with Tech before qualifying or race. 2021-09-01 P2 P2 CN Engine Rebuild Clarification #31000wordingwordingP2 CN Honda K20A-FD2 engine rebuild rules clarified: machining prohibition replaced with specific restrictions on balancing, porting, polishing, valve jobs, cylinder honing. 2021-08-01 P2 F5 P2 Conversion #30856aerofasterConverted F5 cars in P2 minimum width reduced to 55 inches from F5 spec. 2021-08-01 P2 Clarify minimum body width requirement #30859wordingwordingP2 clarifies minimum body width requirement between front and rear wheels for Ralt RT40, RT41, Swift 008, 014. 2021-05-01 P2 E&O tonneau cover provision in cockpit opening section #30459wordingwordingP2 tonneau covers now allowed to meet minimum dimensions; equipment attachment requirements clarified. 2021-05-01 P2 Remove effective dates in Table 1 #30468wordingwordingP2 multiple chassis models remove effective dates from Table 1 specifications. 2021-05-01 P2 E&O Maximum Valves Per Cylinder #30560engineengineP2 engines limited to 4 valves per cylinder maximum across all three spec lines. 2021-04-01 SM Updates - Obsolete Parts & BOP Parts #30438wordingwordingSM adds procedures for testing obsolete part replacements and BOP updates in sanctioned events with CRB approval. 2021-03-01 FC Request for FC Weight Change #30171weightfasterFC Pinto engine loses 10 lbs to 1190; Pinto aluminum head loses 10 lbs to 1190; Zetec loses 10 lbs to 1210. 2021-03-01 P2 Add a new spec line for a 2-cycle, 3-cylinder engine up to 820cc #30272cars addedcars addedP2 adds new spec line for 2-cycle 3-cylinder engine up to 820cc with 10 front and 14-15 rear wheel width. 2020-12-01 P2 Balance of Performance adjustments effective 01-01-2021 #29822inductionfasterP2 Honda K20A-FD2 intake restrictor reduced from 55mm to 50mm, making cars faster. 2020-10-01 FC Urgent: SCCA PE3 map unsuitable #29475wordingwordingFC: Pectel T2 and Performance PE-3 ECU maps clarified; SCCA Club or 2013 Pro map required. 2020-10-01 SM Radiator E&O Clarifications #29294wordingwordingSM aftermarket radiators must mount in original location, maintain core plane, require no body modifications, block openings, keep one OEM fan in stock location; 1990-1997 cars may install upper radiator seal NA75-50-OK7A. 2020-09-01 P2 E&O clarification of P2 rear wing requirements #29205aeroaeroP2 rear wing requirements clarified: standard wing 6×12 inches, end plates 14-inch square; alternate 110cm width wing 9×18 inches, end plates 14×18 inches. 2020-08-01 FC Request for weight adjustments to equalize FC competition. #28888weightslowerFC Zetec engine minimum weight increases 20 lbs to 1220 lbs. 2020-08-01 SM Modifications to prevent failures of Rear Brake Caliper Pin #28953suspension & brakessuspension & brakesSM rear brake calipers may use single bracket under upper retaining bolt to prevent pin failure. 2020-06-01 P2 Classify Elan NP01 in P2 Table 1 #28812cars addedcars addedElan NP01 classified in P2 Table 1 as Spec Line car with 2000cc displacement and P2 Engine Table restrictor. 2020-05-01 P2 SCCA Enterprises ESR / P2 engine restrictor testing #28669engineengineP2 Enterprises Sports Racer adds 55mm flat plate intake restrictor Part # WM303013 as alternative to SIR. 2020-04-01 P2 Add ESR inlet restrictor #27869inductionslowerP2 Enterprise Sports Racer 2.3L engine now requires SIR or Flat Plate restrictor sized in 0.5mm increments. 2020-03-01 P2 Request for Fly by Wire Rule Wording Change #28247wordingwordingP2 fly-by-wire throttle control wording clarified: stock ECUs with drive-by-wire must activate original throttle shaft mechanism. 2020-01-01 P2 Request for addition of BMW Engine in P2 Engine Table #27821cars addedcars addedP2 adds BMW to motorcycle-based engine options in 4-cycle line alongside Kawasaki, Suzuki, Yamaha, Honda. 2019-12-01 FC Request for Better Zetec Connecting Rods #27710wordingwordingFC Zetec connecting rods now allow Eagle #CRS5483F3D in addition to original Ford. 2019-12-01 FC Add Alternate Piston #27795wordingwordingFC adds Mahle #930169439 piston as alternate option to existing Ford, Sealed Power, and United Engine choices. 2019-10-01 P2 Update Engine Table Line E notes #27414inductionslowerP2 Honda K20A-FD2 non-composite chassis must use 55mm flat plate intake restrictor at 1500 lbs minimum weight. 2019-08-31 P2 Update P2 Engine Table spec lines to reflect 3/1/2019 #27254inductionslowerP2 motorcycle engines: Stock restrictor 36.5mm to 35mm, modified 37.5mm to 34mm; B.5 restrictor 37.5mm to 33mm. All weights increase 25 lbs. 2019-07-01 P2 E&O Transmissions #27006otherslowerP2 cars limited to power application on maximum two wheels, effective 2019-07-01. 2019-06-01 P2 Request to restrict all cars #26246weightslowerP2 Enterprise minimum weight increases to 1375 lbs; peak horsepower of sealed ESR engine reduced per CRB specification. 2019-05-01 FC E&O Wiseco piston and Crower connecting rod #26659wordingwordingFC Wiseco piston and Crower connecting rod part numbers updated; minimum weight 976 grams. 2019-03-01 P2 Change Engine Table Lines B.1 & B.5 #25777inductionslowerP2 stock engine restrictor shrinks to 35.0mm and weight rises to 1025 lbs; modified engine restrictor to 34.0mm, weight to 1125 lbs; line B.5 restrictor to 33.0mm, weight to 1185 lbs. 2019-03-01 P2 Change Line A.1 restrictor size #26429inductionslowerP2 Line A.1 restrictor reduced from 40mm to 38mm. 2019-03-01 SM Request to allow aftermarket fuel filters. #26370wordingwordingSM fuel pump and filter must be Mazda or OEM Equivalent part. 2019-02-01 SM Request 99-00 replacement Wire harnesses #25602wordingwordingSM 1999-2000 model year cars may use replacement Mazda ECU and injector harnesses, unmodified. 2019-02-01 SM Organize and Clarify 9.1.7.C.1.o. #25913wordingwordingSM electrical rules reorganized and clarified; alternator external regulation now prohibited except via OEM ECU/kill switch. 2019-02-01 SM Strike Tire Tread Language #26123wordingwordingSM removes tire tread protrusion beyond fender opening requirement from GCR 9.1.7.C.5. 2019-01-01 FC Correct Wiseco piston and connecting rod #25809weightslowerFC Wiseco piston and Crower connecting rod assembly minimum weight increases from 555 to 976 grams. 2019-01-01 P2 Request to Allow 1345cc Hayabusa Engines for Spec Line P2 Cars #25595enginefasterP2 Spec Line cars now allow 1345cc Hayabusa stock engines at 1050 lbs with 30mm restrictor. 2019-01-01 P2 Change CN inlet restrictor implementation date #25816wordingwordingP2 Group CN Honda K20A-FD2 55mm restrictor implementation delayed from 1/1/2019 to 3/1/2019. 2019-01-01 P2 Clarify Honda K20A-FD2 parts requirement #25950inductionslowerP2 Honda K20A-FD2 in CN chassis must use stock intake manifold with 64mm throttle body and 55mm restrictor at 1500 lbs minimum weight.

Best is the class's fastest lap in that event's qualifying or race sessions, with the driver who set it, how many cars set a time that session and how close the top five were; a best from fewer than three cars is greyed. With two or more classes, "vs" is the gap of each class's best to the first class's at the same event. "% of FC" is the class's best as a share of FC's best at the same event (100% is level, less is quicker): weather and track condition move every class together, so this compares across years where the raw times do not. It still breaks when FC's own field changes or one session was wet and another dry. Newest event first. The coloured figure under each value is the change from the previous event that has one (green is quicker, red slower). Whole laps only, so events with different sector layouts still compare. Weather and track condition are not accounted for.