T1 + GT1 + GT2 + B-Spec at Buttonwillow Raceway Park

2024-03-01 GT2 Classify Corvette C8 (2020- ) into GT2/ST

#33759 from Andrew Aquilante · Rule change · TB 24-03 (2024-03 Fastrack)

In GT2 Spec Lines, classify Chevrolet Corvette C8 (20-) as follows:
GT2-ST Maximum Displacement Minimum Weight Restrictor Notes
Chevrolet Corvette C8
(20-)
6162 3300 71mm -
Flat Plate
LT2 engine.

Applies to Chevrolet Corvette on this page: Igor Lyustin

2024-03-01 B-Spec BOP Adjustment for Yaris iA, 2020+ Versa, and 07-08 Honda Fit

#35382 from Matt Wolfe · Rule change · TB 24-03 (2024-03 Fastrack)

In B-Spec Spec Lines, Honda Fit (07-08), change as follows:
Min weight: "2525 2400"
Notes: "Any Cold Air Intake Package allowed (any manufacturer). This configuration is not currently eligible for Runoffs
competition. This car must compete in three (3) separate Super Tour weekends so that performance data can be collected. In
addition to SCCA data box, OBDII data collected via an AIM or similar device must be submitted."
In B-Spec Spec Lines, Honda Fit (07-08) Automatic, change as follows:
Min weight: "2525 2400"
Add to Notes: "Any Cold Air Intake Package allowed (any manufacturer). This configuration is not currently eligible for Runoffs

2024-03-01 GT2 Requesting classification for a 2015 Mitjet ST in GT2

#35408 from Jim Froula · Rule change · TB 24-03 (2024-03 Fastrack)

In GT2 Spec Lines, GT Cars - MITJET ST, classify MITJET ST as follows:
GT Cars – MITJET ST
Model Years Body Style Drive-
line
Wheel-
base (in)
Notes
MITJET ST 2015 RWD 94.5 Must run per VTS specifications. Must have

2024-03-01 T1 9.1.9.1 T1 new category item/ line 26 rule to expire Jan 1 2023

#35411 from Geoffrey Hegel · Rule change · TB 24-03 (2024-03 Fastrack)

In T1 Spec Lines, classify Pontiac GTO 2006-2009 as Spec Line Number 1590 as follows:

A specification table follows in the original; it is not shown here.

2024-03-01 B-Spec 07-08 Honda Fit Rear Sway Bar part #

#35473 from B-Spec/C-Spec Committee · Rule change · TB 24-03 (2024-03 Fastrack)

In B-Spec Spec Lines, Honda Fit (07-08) Automatic, change Notes as follows:
"Allow rear sway bar Progress # 62.1061 0."
In B-Spec Spec Lines, Honda Fit (07-08), add to Notes the following:
"Allow rear sway bar Progress # 62.1060."

2024-04-01 B-Spec Change restrictor from 30mm to 31mm (2015+ Honda Fit) and add 50#

#34857 from Matt Downing · Rule change · TB 24-04 (2024-04 Fastrack)

In B-Spec Spec Lines, Honda Fit MT (15-19), change as follows:
Weight: ""2525 2550"
Notes: "30 31mm"
In B-Spec Spec Lines, Honda Fit MT (15-19), change as follows:
Weight: ""2525 2550"
Notes: "30 31mm"

2024-04-01 B-Spec Wheel Offset and Spacer Revision

#35466 from Kent Carter · Rule change · TB 24-04 (2024-04 Fastrack)

In GCR, Section 9.1.10.E.8., change as follows:
"Wheels: All wheels shall be one-piece metal castings or metal two piece welded. Wheels of any offset are permitted provided
the tire tread (the portion of the tire that contacts the ground) does not protrude beyond the fender opening when viewed from
the top perpendicular to the ground. Wheel spacers and aftermarket wheel studs/bolts are permitted. Wheel bolts may be
replaced with studs and nuts. Total offset must be the same left to right for an individual axle but may differ from front to rear.
For B-Spec Required wheel/rim diameter is fifteen inches (15”). Maximum wheel/rim width is seven inches (7”). Minimum
Wheel/rim weight shall be 13 lbs.
For C-Spec Required wheel/ rim diameter is seventeen inches (17”). Maximum wheel/rim width is eight inches (8”). Minimum

2024-04-01 T1 Honda S2000

#35582 from Touring Committee · Rule change · TB 24-04 (2024-04 Fastrack)

In T1 Spec Lines, classify Honda S2000 as follows:

A specification table follows in the original; it is not shown here.

2024-04-01 B-Spec Set Expiration Date for Unused Spec Lines

#35742 from B-Spec/C-Spec Committee · Rule change · TB 24-04 (2024-04 Fastrack)

In B-Spec Spec Lines, Mini Cooper Countryman (R60) (11-16), add to Notes the following:
”**This Spec line will expire 1/1/2025 unless an appeal is filed on or before 12/1/2024.**”
In B-Spec Spec Lines, Mini Cooper Paceman (R61) (11-16), add to Notes the following:
”**This Spec line will expire 1/1/2025 unless an appeal is filed on or before 12/1/2024.** ”
In B-Spec Spec Lines, Nissan Versa (07-11) with 1797cc engine, add to Notes the following:
”**This Spec line will expire 1/1/2025 unless an appeal is filed on or before 12/1/2024.** ”

Applies to Mini Cooper on this page: Trenton Kramer, Thomas Lepper

2024-05-01 GT1 Request for Spec Line 1010 Reconsideration

#35009 from Kristofer Olson · Rule change · TB 24-05 (2024-05 Fastrack)

In GT2-ST Spec Lines, Acura NSX, change as follows:
Minimum Weight: "2700 3000"
Restrictor: "43 45mm TIR"

2024-05-01 GT2 Request for Spec Line 1010 Reconsideration

#35009 from Kristofer Olson · Rule change · TB 24-05 (2024-05 Fastrack)

In GT2-ST Spec Lines, Acura NSX, change as follows:
Minimum Weight: "2700 3000"
Restrictor: "43 45mm TIR"

2024-05-01 GT1 Camaro 1993- and 2010-

#35652 from John Bodnar · Rule change · TB 24-05 (2024-05 Fastrack)

In GCR, Section 9.1.2.E.1.b.3., change as follows:
"Camaro (1993-2002)"

2024-05-01 B-Spec Delete trim levels/update language for spec lines

#35746 from B-Spec/C-Spec Committee · Rule change · TB 24-05 (2024-05 Fastrack)

In B-Spec Spec Lines, change Model description as follows:
"Chevrolet Sonic 4dr Sedan MT (12-19)"
"Chevrolet Sonic 4dr Sedan AT (12-19)"
"Chevrolet Sonic 5dr Hatch Hatchback MT (12-19)"
"Chevrolet Sonic 5dr Hatch Hatchback AT (12-19)"
"Ford Fiesta 5dr Hatchback (11-19)"
"Ford Fiesta 4dr Sedan (11-19)"
"Honda Fit MT (07-08)"

2024-05-01 GT2 Request to Eliminate the FPR from the Corvette (-2013) with LS2

#35878 from Michael Quattlebaum · Rule change · TB 24-05 (2024-05 Fastrack)

In GT2-ST Spec Lines, Chevrolet Corvette (14-19), change Restrictor as follows:
"78 80mm flat plate"

2024-05-01 T1 Please Expedite classing the C63 Mercedes

#35987 from Touring Committee · Rule change · TB 24-05 (2024-05 Fastrack)

In T1 Spec Lines, classify Mercedes AMG-C63 S (2023) as follows:

A specification table follows in the original; it is not shown here.

2024-05-01 B-Spec Wheel Rules

#36066 from B-Spec/C-Spec Committee · Rule change · TB 24-05 (2024-05 Fastrack)

In GCR, Section 9.1.10.E.8., change as follows:
"Wheels: All wheels shall be one-piece metal castings or metal two piece welded. All four wheels must be the same dimensional
offset. Any offset is permitted so long as Wheels of any offset are permitted provided the tire tread (the that portion of the tire
that contacts the ground) does may not protrude beyond the fender opening when viewed from the top perpendicular to the
ground. Wheel spacers and aA ftermarket wheel studs/ and or wheel bolts are permitted allowed. Wheel bolts may be replaced
with studs and nuts. Wheel spacers are allowed, but must be the same thickness on all four corners.Total offset must be the
same left to right for an individual axle but may differ from front to rear.
B-Spec Required wheel/rim diameter is fifteen inches (15”). Maximum wheel/rim width is seven inches (7”). Minimum

2024-06-01 B-Spec Add B14 Kit Part # to Sonic Spec line In

#35969 from B-Spec/C-Spec Committee · Rule change · TB 24-06 (2024-06 Fastrack)

B-Spec Spec Lines, change Notes follows:
Chevrolet Sonic Sedan MT (12-19): "33mm flat plate restrictor required. GM suspension kit #2312 → 3679 permitted. Bilstein B14 kit
#47-171725 verified compatible."
Chevrolet Sonic Sedan AT (12-19): "33mm flat plate restrictor required. GM suspension kit #2312 → 3679 permitted. Bilstein B14 kit
#47-171725 verified compatible."
Chevrolet Sonic Hatchback MT (12-19): "34mm flat plate restrictor required. GM suspension kit #2312 → 3679 permitted. Bilstein
B14 kit #47-171725 verified compatible."
Chevrolet Sonic Hatchback AT (12-19): "34mm flat plate restrictor required. GM suspension kit #2312 → 3679 permitted. Bilstein

2024-06-01 B-Spec Eliminate redundant sway bar end link part #s from notes In

#35970 from B-Spec/C-Spec Committee · Rule change · TB 24-06 (2024-06 Fastrack)

B-SPEC Spec Lines, elimination from Notes the following:
Mazda2 (10-14): "Front sway bar end links adjstbl 0000-04-2202,"
Mini Cooper Hatchback (R50) MT (02 - 06): "Front adjustable sway bar links part number 31 35 6 771 is allowed. Rear adjustable
sway bar links part number 35 50 6 772 is allowed."
Mini Cooper Hatchback (R50) CVT (02 - 06): "Front adjustable sway bar links part number 31 35 6 771 is allowed. Rear adjustable
sway bar links part number 35 50 6 772 is allowed."
Mini Cooper (R56) MT (07-10): "Front adjustable sway bar links part number 31 35 6 771 is allowed. Rear adjustable sway bar
links part number 35 50 6 772 is allowed."

2024-06-01 B-Spec Update Fiat 500 Spec line In

#35990 from B-Spec/C-Spec Committee · Rule change · TB 24-06 (2024-06 Fastrack)

B-SPEC Spec Lines, Fiat 500 (12-15), change year as follows: "Fiat 500 (12-
15 7)"

2024-06-01 B-Spec Update (15-19) Honda Fit

#36067 from B-Spec/C-Spec Committee · Rule change · TB 24-06 (2024-06 Fastrack)

CVT Spec Line In B-SPEC Spec Lines, Honda Fit CVT (15-19), change as
follows:
Weight: "2525 2550"
Notes: "30 31mm"

2024-07-01 B-Spec Clean up (15-19) Honda Fit MT & CVT Notes Sections

#36068 from B-Spec/C-Spec Committee · Rule change · TB 24-07 (2024-07 Fastrack)

In B-Spec Spec Lines, Honda Fit MT (15-19), change notes as follows:
"31mm flat plate restrictor required. Allow damper FR LH 51605F23SA81, Damper FR RH FR RH 51606F23SA81,
Damper RR 52610F23SA80, Spring adjust assy RR 52691F23SA80, Bushing Comp, Damper RR TBD, Camber
Adjuster Comp, Damper 51920F23SA82, Damper wrench kit 89211F23SA80, Hose Set, FR & RR Brake
01464F23SA810, Pad Set, XR2 D948 54022F27SA81, Disk, FR Brake 45250F23SA80, Air cleaner element assy
17220FC4YA80, Exhaust pipe assy 18300F23SA81, ACG belt (6PK858) 31110FC4YA80. Allow rear sway bar
Progress 62.1063."
In B-Spec Spec Lines, Honda Fit CVT (15-19), change notes as follows:

2024-07-01 B-Spec Set expiration date for Nissan Versa (09-11)

#36069 from B-Spec/C-Spec Committee · Rule change · TB 24-07 (2024-07 Fastrack)

In B-Spec Spec Lines, Nissan Versa (09-11), add to notes the following:
"**This Spec line will expire 1/1/2025 unless an appeal is filed on or before 12/1/2024.**"

2024-07-01 B-Spec Delete Redundant Rule 25

#36075 from B-Spec/C-Spec Committee · Rule change · TB 24-07 (2024-07 Fastrack)

In B-Spec, GCR Section 9.1.10.E.25., remove in its entirety and renumber.

2024-07-01 GT2 GT2-ST Rule Clarification

#36093 from Dominic Starkweather · Rule change · TB 24-07 (2024-07 Fastrack)

In GCR Section, Appendix K. 2012.M2, add the following:
"After market replacement differential housings are permitted as long as they are an exact equivalent."

2024-07-01 B-Spec Correct error for rear brakes of Hyundai/Kia

#36174 from B-Spec/C-Spec Committee · Rule change · TB 24-07 (2024-07 Fastrack)

In B-Spec Spec Lines, Hyundai Accent Hatchback (12-19), change brakes as follows:
"(R) 9.9 drum or 10.3 drum disc"
In B-Spec Spec Lines, Kia Rio Hatchback (12-19), change brakes as follows:
"(R) 10.3 drum disc"

2024-07-01 GT2 GT4 cars may run in GT2-ST

#36235 from Grand Touring Committee · Rule change · TB 24-07 (2024-07 Fastrack)

In 9.1.2. GT2 Spec Lines, GT3 Cars, change Note as follows:
"Note: All GT4 cars are permitted to compete in GT2-ST provided they use a factory supplied power stick or Pro Series
required restrictor. Must have GT4 rules in possession at all race events. Cars must comply with 2012 STO rules as
stated in Appendix K of the GCR. Engine Displacements in this table are nominal. Each competitor shall have available
definitive documentation (e.g., factory manual) of the original displacement for the engine used. Slicks allowed on all
GT2/ST cars with a 100-pound weight penalty."

2024-08-01 B-Spec Update Tire Rules

#35984 from B-Spec/C-Spec Committee · Rule change · TB 24-08 (2024-08 Fastrack)

In GCR Section 9.1.10.E.7. change as follows:
"a. For the remainder of 2023, B-Spec entrants will be allowed to compete on both Hankook and Goodyear Tires. For B-
Spec: tires shall be Hankook 205/50R15 C51, Hankook 200/580R15 Z217, P205/50Z R15 Goodyear Eagle RS (Dry tire) Catalog
#D4850 or P205/50ZR15 Goodyear Eagle RS-R (Wet tire) Catalog #D4851. Effective 1-1-2024 Hankook Tires will be allowed at
regional events only, through 6-30-2024. Effective 7-1-2024 Goodyear is the only legal specified tire allowed in B-spec for all
events. Mixing wet and dry tires is not permitted. Tires may not be modified. All B-Spec competitors are required to place two (2)
12-inch or larger “Goodyear” decals on their cars, one on each side of the car above the front tire.
C-Spec: Tires shall be 225/45R17. No Mixing of wet and dry tires on the same car is not permitted. Tires must be run unmodified.

2024-08-01 B-Spec BOP help for the automatic B-Specs

#36161 from B-Spec/C-Spec Committee · Rule change · TB 24-08 (2024-08 Fastrack)

In B-Spec Spec Lines, change as follows:
Chevrolet Sonic Sedan AT
Notes: "33 5mm"
Chevrolet Sonic Hatchback AT
Notes: "34 6mm"
Honda Fit AT (07-08)
Weight (lbs): "2400 2350"
Notes: "Any aftermarket header allowed."

2024-08-01 B-Spec Require hood pins

#36233 from Frank Schwartz · Rule change · TB 24-08 (2024-08 Fastrack)

In GCR, Section 9.1.10.E.41., change as follows:
"Optional Hood Pins may be added to supplement the original hood latch system. All parts of the original hood latch system
must remain in the car. Installation of hood pins is recommended but not required. If hood pins are used, the factory release and
cable must be removed, but the secondary latch may be retained. Vehicles equipped with plastic release cables may replace them
with steel units. The OEM hood release latch may be relocated."

2024-08-01 B-Spec Sonic Caliper Pistons

#36238 from Jonathan Wickert · Rule change · TB 24-08 (2024-08 Fastrack)

In B-Spec Spec Lines, change Chevrolet Sonic Sedan MT (12-19), add to Notes the following:
"Allow Babyface Fabrication brake caliper piston SNC-SS."
In B-Spec Spec Lines, change Chevrolet Sonic Sedan AT (12-19), add to Notes the following:
"Allow Babyface Fabrication brake caliper piston SNC-SS."
In B-Spec Spec Lines, change Chevrolet Sonic Hatchback MT (12-19), add to Notes the following:
"Allow Babyface Fabrication brake caliper piston SNC-SS."
In B-Spec Spec Lines, change Chevrolet Sonic Hatchback AT (12-19), add to Notes the following:
"Allow Babyface Fabrication brake caliper piston SNC-SS."

2024-11-01 B-Spec Scion IA/Toyota Yaris/Mazda 2 DY chassis suspension

#35780 from Derrick Ambrose · Rule change · TB 24-09 (2024-09 Fastrack)

In B-Spec Spec Lines, Toyota/Scion IA Sedan (16-20), change Notes as follows:
"38mm FPR. (Effective 11/1/2024) Allow ST Suspension Kit 13275022. This configuration is not currently eligible for Runoffs
competition. This car must compete in three (3) separate Super Tour weekends so that performance data can be collected. In
addition to SCCA data box, OBDII data collected via an AIM or similar device must be submitted."

2024-11-01 GT1 Request to Classify Mazda 26B Engine

#36230 from Wayne Graham · Rule change · TB 24-09 (2024-09 Fastrack)

In GT1 Spec Lines, GT1 Approved Automobile List, Mazda, add the following:
"(Effective 11/1/2024) 26B engine = 2850 lbs."

2024-11-01 B-Spec Clean up 07-08 Honda Fit AT Notes Section

#36542 from B-Spec/C-Spec Committee · Rule change · TB 24-09 (2024-09 Fastrack)

In B-Spec Spec Lines, Honda Fit AT 07-08, change Notes as follows:
"(Effective 11/1/2024) Allow damper and spring set 51600F23SA100, Damper FR LH 51605F23SA100, Damper FR RH
51606F23SA100, Damper RR 52610F23SA100, Spring adjust asy RR 52691F23SA010. Seat upper FR spring 51688F23SA200,
51402FC4YA00 front helper spring and 51403FC4YA00 front spacer permitted. Front Damper Mount P/N 51920-F23S-A30 is
allowed. Allow rear sway bar Progress # 62.1060. Any Cold Air Intake Package allowed (any manufacturer). This configuration is
not currently eligible for Runoffs competition. This car must compete in three (3) separate Super Tour weekends so that
performance data can be collected. In addition to SCCA data box, OBDII data collected via an AIM or similar device must be
submitted."

2024-12-01 T1 Changes to T1 Tires for GT4 and Other Cars

#35383 from Andrew Aquilante · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 GT4 Spec Lines, change Tire Size as follows:
Aston Martin Vantage AMR GT4 4010: "315 DOT, 305/660 Non-DOT"
Audi R8 GT4 - Spec Line #4020: "315 DOT, 305/645 Non-DOT"
BMW M4 GT4 - Spec Line #4030: "315 DOT, 305/660 Non-DOT"
Chevrolet Camaro GT4-R- Spec Line #4035: "315 DOT, 305/680 Non-DOT"
Ford Mustang GT4 - Spec Line #4040: "315 DOT, 315/680 Non-DOT"
Mclaren 570S GT4 - Spec Line #4050: "315 DOT, 305/645 Non-DOT"
Mercedes AMG GT4 - Spec Line #4060: "315 DOT, 305/660 Non-DOT"

2024-12-01 T1 G82 M4 GT4 inclusion in T1

#35864 from Denny Stripling · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 GT4 Spec Lines, SL#4030, change as follows:
Model: "BMW M4 GT4 (F82)"
Performance Control: "Gold power stick Red power stick"
In T1 GT4 Spec Lines, classify BMW M4 GT4 (G82) as follows:

A specification table follows in the original; it is not shown here.

2024-12-01 GT1 Lamborghini Huracan GT3 Evo Restrictor Help

#36254 from Michael McAleenan · Rule change · TB 24-12 (2024-12 Fastrack)

In GT1-ST Spec Lines, Lamborghini Huracan GT3 EVO(1) (2018-), change Restrictor as follows:
"2 X 39mmUnrestricted"
In GT1-ST Spec Lines, Lamborghini Huracan GT3 (2019-), change Restrictor as follows:
"52mm Unrestricted"

2024-12-01 T1 Alt. Clutch Allowance

#36606 from Hugh Stewart · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 Spec Lines, SL# 1050, change add to Engine Notes the following:
"5.5 inch clutch permitted."

2024-12-01 T1 BOP Changes Need Updates

#36667 from Joe Rainey · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 GT4 Spec Lines, Spec Line 4020, change as follows:
Performance Control: Power level 2020, 44mm 45mm SRO compliant restrictor"
Min. Weight with driver (LBS): "3550 3400"

2024-12-01 T1 Request Ford Performance Darkhorse R in T1

#37136 from Christopher Childs · Rule change · TB 24-12 (2024-12 Fastrack)

In T1-Homologated Cars Spec Line, classify Mustang Darkhorse R (Mustang Challenge) as follows:
T1 – Homologated Cars

A specification table follows in the original; it is not shown here.

2024-12-01 T1 Car Mods for T1 Corvette under line item 1150

#37173 from Thomas Napolitano · Rule change · TB 24-12 (2024-12 Fastrack)

In GCR, Section 9.1.9.1.A.2,, add the following:
"It is permitted to roll under or flatten any interior lip on the wheel opening for tire clearance. Cars with plastic/composite
fenders may remove any interior wheel opening lip, but the resulting material edge shall be no thinner than the basic fender
material thickness. Non-metallic inner fender liners may be removed. Vents may be added to fenders."

2024-12-01 T1 Increased Bore Throttle Bodies for E46 M3 S54 Engine

#37273 from Mark Pfeffer · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 Spec Lines, E46 M3 Spec Line # 1050, add to Engine Notes the following:
"Dinan Throttle Body #D760-3400 allowed on the 3.250L."

2025-01-01 B-Spec Remove wheelbase from spec lines and replace with Restrictor

#36074 from B-Spec/C-Spec Committee · Rule change · TB 24-11 (2024-11 Fastrack)

In B-Spec Spec Lines that are not expiring on 1/1/25, replace Wheelbase as follows:
"(Effective 1/1/2025)Wheelbase Restrictor (mm)"
In B-Spec Spec Lines, update the value in the spec lines under the Restrictor column as follows effective 1/1/2025:
Chevrolet Sonic Sedan MT (12-19): "2525 33"
Chevrolet Sonic Sedan AT (12-19): "2525 35"
Chevrolet Sonic Hatchback MT (12-19): "2525 34"
Chevrolet Sonic Hatchback AT (12-19): "2525 36"
Fiat 500 (12-17): "2300"

2025-01-01 GT2 Panoz Esperante GTS BOP

#36686 from Brian Goldburg · Rule change · TB 25-01 (2025-01 Fastrack)

In GT2 SPEC LINES, GT Engines - PANOZ, classify 2013-2016 Ford EcoBoost Twin Turbo as follows:
GT Engines – PANOZ
Engine
Family
Engine Type Bore x
Stroke
(in.)
Disp.

A specification table follows in the original; it is not shown here.

2025-01-01 B-Spec Bilstein Rear Shock Request for Hyundai Accent/Kia Rio

#36965 from Alex Ratcliffe · Rule change · TB 25-01 (2025-01 Fastrack)

In B-Spec Spec Lines, Hyundai Accent Hatchback (12-19), add to Notes the following:
"Bilstein B8 shock 33-187112 approved for use in rear suspension."
In B-Spec Spec Lines, Kia Rio Hatchback (12-19), add to Notes the following:
"Bilstein B8 shock 33-187112 approved for use in rear suspension."

2025-01-01 GT1 Addition of a limited prep LS Chevy engine for GT1

#37045 from Robert Logsdon · Rule change · TB 25-01 (2025-01 Fastrack)

In GCR, Section 9.1.2. GT1 Spec Lines, GT1 Approved Automobile List, LS1 V8 engine allowed with stock intake, add the
following:
"LS1 Limited Prep GT1 motor
2600 # with driver
Blocks : GM castings or aftermarket, no lightening, Max volume 383 cubic inches
Cylinder Heads: GM LS castings or aftermarket, stock valve angle, intake and exhaust ports must be in stock location, porting
and polishing allowed
Valves: No titanium valves, must be stock size for head part number

2025-01-01 GT1 Correct language regarding OEM Areo Devices

#37137 from Christopher Childs · Rule change · TB 25-01 (2025-01 Fastrack)

In GCR, Section APPENDIX L. 2013 TA2 TECHNICAL REGULATIONS, B.2.c., change as follows:
"B. Aerodynamic Devices
2. Rear wing
c. The entire rear wing assembly, including the end plates and any Gurney flap, shall be mounted level
with, or below, the peak of the roof. OEM aerodynamic devices do not need to adhere to the height rule."

A specification table follows in the original; it is not shown here.

2025-01-01 GT2 Correct language regarding OEM Areo Devices

#37137 from Christopher Childs · Rule change · TB 25-01 (2025-01 Fastrack)

In GCR, Section APPENDIX L. 2013 TA2 TECHNICAL REGULATIONS, B.2.c., change as follows:
"B. Aerodynamic Devices
2. Rear wing
c. The entire rear wing assembly, including the end plates and any Gurney flap, shall be mounted level
with, or below, the peak of the roof. OEM aerodynamic devices do not need to adhere to the height rule."

A specification table follows in the original; it is not shown here.

2025-01-01 GT2 GT2 Sunbeam Tiger Alternate Carburetor

#37198 from Tom Patton · Rule change · TB 25-01 (2025-01 Fastrack)

In GT2 Spec Lines, GT Engines - SUNBEAM, add to Fuel Induction as follows:
"Carburetors(s) Holly 650 cfm PN #80541-1 and PN #80541-2"

2025-01-01 GT1 GT1-ST Adjustments

#37481 from Grand Touring Committee · Rule change · TB 25-01 (2025-01 Fastrack)

In GT1-ST SPEC LINES, change as follows:
Aston Martin Vantage GT3 (2012) :
Restrictor: "2 x 41.5mm"
Audi R8 LMS Ultra GT3 (10-14) :
Restrictor: "2 x 49mm"
BMW Z4 GT3 (10-13):
Restrictor: "70mm"
Chevrolet Corvette C8 (20-):

2025-02-01 GT2 GT2/ST - Remove Aftermarket/Racing ABS penalty

#36538 from Jorge A Nazario · Rule change · TB 25-02 (2025-02 Fastrack)

In GCR, Appendix K. 2012 STO Rules, O.9., change as follows:
"May run OEM ABS or convert to an aftermarket ABS controller with 100 50 lb. weight penalty."

2025-02-01 T1 T1 Parity Compared to GT4

#37170 from Tony Ave · Rule change · TB 25-02 (2025-02 Fastrack)

In T1 Spec Lines, change Weight and Restrictor Required as follows:
Mustang - Spec Line 1430
Weight: "3475 3600"
Restrictor Required: "65mm 60mm - FPR"
Corvette Spec Line 1190
Weight: "3450 3500"
Restrictor Required: "70mm 67mm - Flat Plate"
In T1 Spec Lines, delete Spec Line BMW # 1190 in its entirety.

2025-02-01 B-Spec Remove Redundant Language from Notes Sections

#37337 from B-Spec/C-Spec Committee · Rule change · TB 25-02 (2025-02 Fastrack)

In B-Spec Spec Lines, Honda Fit AT (07-08), change Notes as follows:
"Allow damper and spring set 51600F23SA100, Damper FR LH 51605F23SA100, Damper FR RH 51606F23SA100, Damper RR
52610F23SA100, Spring adjust asy RR 52691F23SA010. Seat upper FR spring 51688F23SA200, 51402FC4YA00 front helper spring
and 51403FC4YA00 front spacer permitted. Front Damper Mount P/N 51920-F23S-A30 is allowed. Allow rear sway bar Progress
# 62.1060. Any Cold Air Intake Package allowed (any manufacturer). This configuration is not currently eligible for Runoffs
competition. This car must compete in three (3) separate Super Tour weekends so that performance data can be collected. In
addition to SCCA data box, OBDII data collected via an AIM or similar device must be submitted. Any aftermarket header
allowed. Allow rear sway bar Progress # 62.1060. Any Cold Air Intake Package allowed (any manufacturer). This configuration is

Applies to Mini Cooper on this page: Trenton Kramer, Thomas Lepper

Applies to Toyota Yaris on this page: Joseph Gersch

2025-02-01 T1 Clarification of Request Approval #37273

#37399 from Mark Pfeffer · Rule change · TB 25-02 (2025-02 Fastrack)

In T1 Spec Lines, E46 M3 Spec Line # 1050, change Engine Notes as follows:
"Dinan Throttle Body #D760-3400 VAC Motorsports #VAC-TB-S54 allowed on the 3.250L."

2025-02-01 T1 C8 Corvette Facts

#37400 from Garry Crook · Rule change · TB 25-02 (2025-02 Fastrack)

In T1 Spec Lines, Chevrolet Corvette C8 (20- 23) - Includes Z51, Spec Line # 1210, change Min. Weight as follows:
"3600 3500"

2025-02-01 T1 Camaro Gen 5 Competitive Disadvantage

#37440 from Clark Nunes · Rule change · TB 25-02 (2025-02 Fastrack)

In T1 Spec Lines, Chevrolet Camaro Gen 5 (10-15) Including SS, Z28 Spec Line 1135, change Required Restrictor as follows:
"75mm 80mm - Flat Plate"

2025-02-01 T1 Tire Changes in the Rules for GT4

#37497 from Joe Rainey · Rule change · TB 25-02 (2025-02 Fastrack)

In T1-GT4 Spec Lines, Audi R8 GT4 Spec Line #4020, change Max Tire Size as follows:
"315 DOT, 305/645, or 30/65-18 (f), 33/68-18 (r) Non-DOT"

2025-02-01 B-Spec Expire designated spec lines

#37517 from B-Spec/C-Spec Committee · Rule change · TB 25-02 (2025-02 Fastrack)

In B-Spec Spec Lines, delete the following spec lines effective 2/1/25 in their entirety:
"Mini Cooper Countryman (R60) (11-16)"
"Cooper Paceman (R61) (11-16)"
"Nissan Versa (07-11)"
"Nissan Versa (09-11)"

2025-02-01 B-Spec Set expiration date for Nissan Micra Cup Cars (Canadian)

#37519 from B-Spec/C-Spec Committee · Rule change · TB 25-02 (2025-02 Fastrack)

In B-Spec Spec Lines, Nissan Micra Cup Car, add to Notes the following:
"This spec line will expire on 7/1/25 unless an appeal is submitted by 6/30/25."

2025-03-01 GT2 Hood Bulge allowed

#37000 from Gordon Leslie · Rule change · TB 25-03 (2025-03 Fastrack)

In GT2 Spec Lines, GT2 Cars - PONTIAC, Fiero, change as follows:
Drive-line: "FWD RWD"
Add to Notes: "Hood bulge permitted as requested for front engine relocation only."

2025-03-01 GT1 Request to Classify Acura NSX GT3 Evo 22

#37367 from Taz Harvey · Rule change · TB 25-03 (2025-03 Fastrack)

In GT1 Spec Lines, GT 1 Cars - ACURA, classify Acura NSX GT3 EVO 22 as follows:
GT 1 Cars - ACURA
Model Years Body Style Drive-
line
Wheel-
base (in)
Notes
Acura NSX GT3 EVO 22 N/A 2dr RWD 103.5 Ground Clearance 50mm

A specification table follows in the original; it is not shown here.

2025-03-01 B-Spec Toyota Yaris Hatchback (12-18) rear disc brakes

#37530 from B-Spec/C-Spec Committee · Rule change · TB 25-03 (2025-03 Fastrack)

In B-Spec Spec Lines, Toyota Yaris Hatchback (12-18), please add to Brakes (inches) as follows:
"(F) 10.0 (R) 7.9 drum or 10.2 disc"

2025-03-01 B-Spec Yaris Speed Sensor

#37536 from B-Spec/C-Spec Committee · Rule change · TB 25-03 (2025-03 Fastrack)

In B-Spec Spec Lines, Toyota Yaris Hatchback (12-18) AND Toyota Yaris Sedan (07-12), add to Notes the following:
"Speed sensor may be disconnected."

2025-03-01 GT2 OEM Wing Adjustment

#37590 from Christopher Childs · Rule change · TB 25-03 (2025-03 Fastrack)

In GCR, Section APPENDIX L. 2013 TA2 TECHNICAL REGULATIONS, B.2.c., change as follows:
"The entire rear wing assembly, including the end plates and any Gurney flap, shall be mounted level with, or below, the peak of
the roof. OEM aerodynamic devices do not need to adhere to the height rule."
In GCR, Section APPENDIX K. 2012 STO GENERAL TECHNICAL REGULATIONS, D.4.b., add the following:
"Factory wings, and spoilers, and roof vortex generators are permitted, but must be removed if an approved aftermarket wing is
installed. OEM aerodynamic devices do not need to adhere to the height rule."

2025-03-01 B-Spec Set Expiration Date For Fiat 500

#37689 from B-Spec/C-Spec Committee · Rule change · TB 25-03 (2025-03 Fastrack)

In B-Spec Spec Lines, Fiat 500 (12-17), please add to Notes the following language:
"This spec line will expire on 1/1/26 unless an appeal is filed."

2025-03-01 T1 Correct and make new T1 BOP adjustments.

#37737 from Touring Committee · Rule change · TB 25-03 (2025-03 Fastrack)

In T1 Spec Lines, change Weight, Restrictor Required and/or Notes as follows:
Mustang - Spec Line 1430:
Restrictor Required: "60mm 65mm - FPR"
Mustang - Spec Line 1460:
Weight: "3425 3500"
Restrictor Required: "70mm - FPR"
Corvette Spec Line 1190:
Restrictor Required: "67mm 70mm - Flat Plate"

2025-04-01 B-Spec 2025 BOP Recommendations

#37520 from B-Spec/C-Spec Committee · Rule change · TB 25-04 (2025-04 Fastrack)

In B-SPEC Spec Lines, change as follows:
Honda Fit MT (09-14): "Any Cold Air Intake Package allowed (any manufacturer) Allow Injen Intake SP1512, K&N Intake 69-
1017TTK, or HPS intake 827-102 with a 25lb adder."
Mazda2 (10-14): "Exhaust Header (cat delete) HB.EM 60-404-S-SS, HP-MZD001 allowed with a 50lb adder, or Mazda
Motorsports PN 0000- 06-2410 permitted with no weight adder."
Mini Cooper (R56) MT (07-10): "44 5 FPR (OE Catalyst)"
Mini Cooper (R56) AT (07-10): "46 7 FPR (OE Catalyst)"
Mini Cooper Clubman (R55) (07-10): "44 5 FPR (OE Catalyst)"

2025-04-01 B-Spec Hyundai/Toyota Factory Rear Disc Models

#37534 from B-Spec/C-Spec Committee · Rule change · TB 25-04 (2025-04 Fastrack)

In B-SPEC Spec Lines, add to Notes the following:
Hyundai Accent Hatchback (12-19): "Vehicles equipped with rear drum brakes subtract 25 lb."
Toyota Yaris Hatchback (12-18): "Vehicles equipped with rear disc brakes add 25 lb."

2025-04-01 B-Spec Request to Update the Spec line for Hyundai Accent and Kia Rio

#37880 from Alex Ratcliffe · Rule change · TB 25-04 (2025-04 Fastrack)

In B-SPEC Spec Lines, add to Notes as follows:
Hyundai Accent Hatchback (12-19): "Bilstein B14 kit #4716 → 7490 front shocks verified compatible. Allow BabyFace Fabrication
sump extension #BF-HYU-PAN."
Kia Rio Hatchback (12-19): "Bilstein B14 kit #4716 → 7490 front shocks verified compatible. Allow BabyFace Fabrication sump
extension #BF-HYU-PAN."

2025-04-01 T1 Cadillac CT4-V Blackwing

#38003 from Touring Committee · Rule change · TB 25-04 (2025-04 Fastrack)

In T1 Spec Lines, classify Cadillac CT4-V Blackwing as follows:

A specification table follows in the original; it is not shown here.

2025-05-01 T1 Acceptance of Porsche 981 GT4 Clubsport into T1

#36664 from John Brown · Rule change · TB 25-05 (2025-05 Fastrack)

In T1-GT4 Spec Lines, classify Porsche 981 GT4 Clubsport as follows:

A specification table follows in the original; it is not shown here.

2025-05-01 T1 Request to Restore T1 Honda S2000 to Proper Weights

#37644 from David Mead · Rule change · TB 25-05 (2025-05 Fastrack)

In T1 Spec Lines, Honda S2000, Spec Line 1530, change as follows:
Minimum Weight: "2950 2900"
Chassis Notes: "This spec line is set to expire as of 12/31/2025 if not represented in Majors competition in 2025."

2025-05-01 B-Spec Correct Hyundai/Kia Model Years

#37943 from B-Spec/C-Spec Committee · Rule change · TB 25-05 (2025-05 Fastrack)

In B-Spec Spec Lines, correct model years as follows:
"Hyundai Accent Hatchback (12-19 7)"
"Kia Rio Hatchback (12-19 5)"

2025-05-01 T1 DCT Transmission in E46

#37964 from Matt Spicuzzi · Rule change · TB 25-05 (2025-05 Fastrack)

In T1 Spec Lines, BMW E46 M3, add to Chassis Notes the following:
SL# 1060: "BMW #GS7D36SG transmission permitted as an aftermarket sequential option."
SL# 1070: "BMW #GS7D36SG transmission permitted as an aftermarket sequential option."

Applies to BMW M3 on this page: Ian Barberi

2025-05-01 B-Spec 07-08 Honda Fit MT Requests

#37974 from Caleb Patrie · Rule change · TB 25-05 (2025-05 Fastrack)

In B-SPEC Spec Lines, Honda Fit MT (07-08), change as follows:
Minimum weight: "2400 2450"
Notes: "OEM exhaust manifold required. Primary catalyst may be removed."

2025-05-01 B-Spec Add B14 Kit Part # to Honda Fit (07-08) Spec line

#38010 from B-Spec/C-Spec Committee · Rule change · TB 25-05 (2025-05 Fastrack)

In B-SPEC Spec Lines, Honda Fit (07-08) MT, add to Notes the following:
"Bilstein B14 kit 4717 → 2401 verified compatible."
In B-SPEC Spec Lines, Honda Fit (07-08) AT, add to Notes the following:
"Bilstein B14 kit 4717 → 2401 verified compatible."

2025-05-01 T1 Reduce E92 M3 Minimum Weight to 3050

#38092 from Shane Brown · Rule change · TB 25-05 (2025-05 Fastrack)

In T1 Spec Lines, BMW M3 E92 (08-13), Spec Line 1100, change Min. Weight as follows:
"3350 3300"

2025-05-01 T1 Finalize Spec Line for T1 Darkhorse

#38106 from Touring Committee · Rule change · TB 25-05 (2025-05 Fastrack)

In T1 Spec Lines, Mustang Darkhorse R (Mustang Challenge) Spec Line- 4119, change as follows:
Tire size: "305 315 (f) 315(r)"
Performance Control: "TBD"
Min. Weight with driver (LBS): "10.5 (f) 11 (r) 3600"
Chassis Notes: "Must conform to Mustang Challenge Rules. Tires conforming to Mustang Challenge rules are permitted. **This
car is not eligible for the Runoffs until it has competed in 3 Super Tour events.**"

2025-06-01 B-Spec Add Sedan spec lines for Hyundai & Kia

#37537 from B-Spec/C-Spec Committee · Rule change · TB 25-06 (2025-06 Fastrack)

In B-SPEC Spec Lines, classify Hyundai Accent Sedan (12-17) as follows:
B-SPEC Bore x
Stroke(mm)
Displacement
(cc)
Gear Ratios Final

A specification table follows in the original; it is not shown here.

2025-06-01 B-Spec Shifter Bushing Questions.

#38048 from Eric Yagel · Rule change · TB 25-06 (2025-06 Fastrack)

In B-SPEC Spec Lines, Honda Fit MT (09-14) add to Notes the following:
"Allow Acuity Shifter Base Bushing Kit 1954."

2025-06-01 B-Spec Add Weapon R Intake to Honda Fit MT (09-14) Spec Line

#38306 from B-Spec/C-Spec Committee · Rule change · TB 25-06 (2025-06 Fastrack)

In B-SPEC Spec Lines, Honda Fit AT (09-14), add to Notes the following:
"Weapon R Intake 301-166-301"

2025-06-01 B-Spec Update Rule 46

#38307 from B-Spec/C-Spec Committee · Rule change · TB 25-06 (2025-06 Fastrack)

In GCR, Section 9.1.10.E.46. change as follows:
"Aftermarket shift knobs are allowed and shift levers mat y be bent or extended, however the shift linkage/cables must remain
stock and may not be modified in any way. Approved aftermarket shift linkage bushings are permitted."

2025-08-01 B-Spec Disabling 2 Pedal Shutdown

#38354 from Eric Yagel · Rule change · TB 25-08 (2025-08 Fastrack)

In B-Spec Spec Lines, Honda Fit MT (09-14), add to Notes the following:
"Two pedal shutdown may be disabled by cutting/de-pinning pin 42 (BKSW) at the main ECU connector in the engine bay."

2025-08-01 GT2 Rear Deck Lid for Older Air-Cooled Porsche

#38506 from Justin Erion · Rule change · TB 25-08 (2025-08 Fastrack)

In GT2 Spec Lines, GT2 Cars-Porsche, 911 Coupe & Targa., add to Notes the following:
"Porsche 911-based race cars (911,963,994), the use of the 993 3.8 RSR rear deck lid/spoiler is permitted. Aftermarket
reproductions of the original Porsche Motorsports deck lid provided they faithfully replicate OEM dimensions and functionality,
are acceptable for use."

2025-08-01 B-Spec Update Honda Fit MT (07-08) Intake Allowance

#38530 from B-Spec/C-Spec Committee · Rule change · TB 25-08 (2025-08 Fastrack)

In B-Spec Spec Lines, Honda Fit MT (07-08), change Notes as follows:
"Bilstein B14 kit 47172401 verified compatible. Allow rear sway bar Progress #62.1060. Any Cold Air Intake Package allowed (any
manufacturer). Allow Injen Intake SP1511. This configuration is not currently eligible for Runoffs competition. This car must
compete in three (3) separate Super Tour weekends so that performance data can be collected. In addition to SCCA data box,
OBDII data collected via an AIM or similar device must be submitted. OEM exhaust manifold required. Primary catalyst may be
removed."

2025-09-01 B-Spec Remove Asterisk from Rule 9

#38768 from B-Spec/C-Spec Committee · Rule change · TB 25-09 (2025-09 Fastrack)

In GCR, Section 9.1.10.D.9, change as follows:
"* If car is used on public roads, these items should be replaced, reactivated, rearmed, etc. when not in competition."

2025-09-01 GT1 Correction to Limited prep LS Chevy engine for GT1

#38902 from Robert Logsdon · Rule change · TB 25-09 (2025-09 Fastrack)

In GCR, Section 9.1.2. GT1 Spec Lines, GT1 Approved Automobile List, LS1 engine allowed with stock intake, make the following
change:
"LS1 Limited Prep GT1 Motor Chevy LS Limited Prep Engine including LS1, LS2, LS3 and LS6."
"Pistons: Factory or aftermarket flat top pistons only, valve reliefs allowed, coatings allowed. Maximum compression ratio
11:1."

2025-10-01 GT1 RM 25-06 GT1 reclassify the Acura NSX GT3 EVO 22 to GT1-ST

#39101 from Club Racing Board · Rule change · TB 25-10 (2025-10 Fastrack)

IN GT1 reclassify the Acura NSX GT3 EVO 22 to GT1-ST as follows:
GT1 Approved Automobile List
Make/Model Wheelbase
ACURA
NSX GT3 EVO 22 103.5”
DOHC 4v per cylinder EFI Twin Turbo Crossflow V-6 Displacement 3500cc Bore and Stroke 91x90
MAX RPM 7500 MAX BOOST 2.1 bar Weight 3100 lbs
GT1-ST Maximum

2025-11-01 B-Spec Alternate Shift Cable Bushings and Rear Spring Seats

#38472 from Caleb Patrie · Rule change · TB 25-09 (2025-09 Fastrack)

In B-Spec Spec Lines, Honda Fit MT (07-08), add to Notes the following:
"(Effective 11/1/2025) Allow Torque Solution Shifter Cable Bushing kit TS-SCB-506."

2025-11-01 B-Spec Fiesta BOP Adjustment

#38847 from B-Spec/C-Spec Committee · Rule change · TB 25-09 (2025-09 Fastrack)

In B-Spec Spec Lines, Ford Fiesta Hatchback (11-19), change as follows:
Weight (lbs): "(Effective 11/1/2025) 2470 2525"
Restrictor (mm) & Type: "(Effective 11/1/2025)39 FPR 40 FPR"
In B-Spec Spec Lines, Ford Fiesta Sedan (11-19), change as follows:
Weight (lbs): "(Effective 11/1/2025) 2470 2525"
Restrictor (mm) & Type: "(Effective 11/1/2025)38 FPR 39 FPR"

2025-11-01 B-Spec Request to Remove Rear Shock From Spec Line Hyundai Accents/Kia

#39017 from Alex Ratcliffe · Rule change · TB 25-11 (2025-11 Fastrack)

In B-Spec Spec Lines, Hyundai Accent Sedan (12-17), change Notes as follows:
"Bilstein B8 shock 33- 187112 approved for use in rear suspension."
In B-Spec Spec Lines, Kia Rio Sedan (12-17), change Notes as follows:
"Bilstein B8 shock 33- 187112 approved for use in rear suspension."

2025-11-01 B-Spec Update Honda Fit MT (07-08) Runoffs Eligibility

#39060 from B-Spec/C-Spec Committee · Rule change · TB 25-11 (2025-11 Fastrack)

In B-Spec Spec Lines, Honda Fit MT (07-08), change Notes as follows:
"Bilstein B14 kit 47172401 verified compatible. Allow rear sway bar Progress #62.1060. Allow Injen Intake SP1511 OEM exhaust
manifold required. Primary catalyst may be removed. This configuration is not currently eligible for Runoffs competition. This car
must compete in three (3) separate Super Tour weekends so that performance data can be collected. In addition to SCCA data
box, OBDII data collected via an AIM or similar device must be submitted. (Effective 11/1/2025) Allow Torque Solution Shifter
Cable Bushing kit TS-SCB-506."

2025-12-01 T1 Keep S2000 Classification

#39344 from David Mead · Rule change · TB 25-12 (2025-12 Fastrack)

In T1 Spec Lines, Honda S2000, change as follows:

2025-12-01 T1 Correcting and updating T1 GT4 spec lines

#39394 from Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

In T1-GT4 Spec Lines, change as follows:

A specification table follows in the original; it is not shown here.

2025-12-01 T1 BOP adjustments to non GT4 T1 cars

#39406 from Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

In T1 Spec Lines, change as follows:
Spec Line # 1134
Required Restrictor: "61mm 70mm - Flat Plate"
Spec Line # 1140
Required Restrictor: "72mm - Flat Plate"
Spec Line # "1175"
Maximum Displ.: "L76 5967cc OEM"
Minimum Weight: "3250"

2025-12-01 T1 Remove T1 Spec Line

#39407 from Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

In T1 Spec Lines, BMW M3 E92 (08-13) Spec Line number 1090, delete Spec Line in its entirety.

2026-01-01 B-Spec Notes section cleanup

#39062 from B-Spec/C-Spec Committee · Rule change · TB 26-01 (2026-01 Fastrack)

In B-Spec Spec Lines, Chevrolet Sonic Sedan MT (12-19), change Notes as follows:
"GM suspension kit #23123679 permitted. Bilstein B14 kit #47-171725 verifed compatible. Allow rear sway bar ZZ Performance
#ZZ-SNCRSB. Allow Aluminum Radiator #ZZP-ZZ013. Allow Babyface Fabrication brake caliper piston SNC-SS. Approved parts: ZZ
Performance rear sway bar ZZ-SNCRSB, ZZ Performance radiator ZZP-ZZ013, Babyface Fabrication brake caliper piston SNC-SS.
Bilstein B14 kit 47-171725 verified compatible."
In B-Spec Spec Lines, Chevrolet Sonic Sedan AT (12-19), change Notes as follows:
"GM suspension kit #23123679 permitted. Bilstein B14 kit #47-171725 verifed compatible. Allow rear sway bar ZZ Performance
#ZZ-SNCRSB. For automatic allow Setrab 1-series Part No. FP119M221. Allow Aluminum Radiator #ZZP-ZZ013. Allow Babyface

Applies to Mini Cooper on this page: Trenton Kramer, Thomas Lepper

Applies to Toyota Yaris on this page: Joseph Gersch

2026-01-01 GT2 Additional Body Options to Replace Older Stock Car Bodies

#39086 from Samuel Daniels · Rule change · TB 26-01 (2026-01 Fastrack)

In GCR, Section 4.8.4.2.1., add the following:
"Cars in the class must use 1997, through current year, commercially available stock car bodywork. The following make/model
bodies are allowed:
1. Cadillac CTS
2. Chevrolet Impala
3. Chevrolet Malibu
4. Chevrolet Monte Carlo
5. Chevrolet SS

2026-01-01 GT1 NSX Parity With Other GT3s Let Alone a GT1 Car

#39311 from Taz Harvey · Rule change · TB 26-01 (2026-01 Fastrack)

In GT1-ST, Acura NSX GT3 EVO 22, change Weight as follows:
"3100 3000"

2026-01-01 GT2 GT3 Turbo to GT2?

#39365 from Chris Edens · Rule change · TB 26-01 (2026-01 Fastrack)

In GT2 Spec Lines, Engines - MAZDA, classify Engine Family BP as follows:
GT2 Engines - MAZDA
Engine
Family
Engine Type Bore x Stroke
(mm)
Disp.
(CC)

A specification table follows in the original; it is not shown here.

2026-01-01 B-Spec 2026 BOP Recommendations

#39475 from B-Spec/C-Spec Committee · Rule change · TB 26-01 (2026-01 Fastrack)

In B-Spec Spec Lines, change as follows:
Chevrolet Sonic Sedan AT (12-19):
Restrictor (mm) & Type: "35 FPR"
Chevrolet Sonic Hatchback AT (12-19):
Restrictor (mm) & Type: "35 FPR"
Honda Fit MT (09-14):
Weight (lbs): "2525 2550"
Honda Fit CVT (15-19):

2026-01-01 T1 additional T1 adjustment

#39520 from Touring Committee · Rule change · TB 26-01 (2026-01 Fastrack)

In T1 Spec Line, Spec line # 1132, change Restrictor as follows:
"70mm - Flat Plate"

2026-01-01 GT2 Tech Bulletins for GT2 and GT2-ST

#39537 from Grand Touring Committee · Rule change · TB 26-01 (2026-01 Fastrack)

In GT2 Spec Lines, GT2 Cars – Porsche, classify 992.1 GT3 Cup as follows:
GT2 Cars – Porsche
Model Year Body
Style Driveline Wheel Base Notes
992.1
GT3 Cup
(22-25) 2 Dr RWD 4.0L flat six. 3250lbs. w/60mm Throttle Body Restrictor (TBR).
Cars must be prepared in accordance with the appropriate

2026-01-01 B-Spec Expire NLA Mazda 2 Headers

#39582 from B-Spec/C-Spec Committee · Rule change · TB 26-01 (2026-01 Fastrack)

In B-Spec Spec Lines, Mazda2 (10-14), change Notes as follows:
"Exhaust Header (cat delete) HB.EM 60-404-S-SS, HP-MZD001, allowed with a 50lb adder or Mazda Motorsports PN 0000-06-
2410 with no weight adder permitted.”

2026-02-01 GT2 Allow Larger Air Cooled Engines in Porsche 911 GT2

#39249 from Justin Erion · Rule change · TB 26-02 (2026-02 Fastrack)

In GT Spec Lines, create GT Cars - PORSCHE and classify SC as follows:
GT Cars - PORSCHE
Model Years Body Style Drive- line Wheel- base
(in)
Notes
SC 1978 2 Dr. Rear engine/RWD 89.45 May use alternate engine bore.
4.0L 2V @2275 lbs. 4.0L 4V @ 2350 lbs.

2026-02-01 GT1 Request for Addition of Porsche 992.1 GT3 Cup into GT1

#39322 from Erik Madsen · Rule change · TB 26-02 (2026-02 Fastrack)

In 9.1.2. GT1 Spec Lines, add the following:
"992.1 GT3 Cup (2022-2025)
OEM ABS and Traction Control allowed. Porsche OEM RSR bumper and canards allowed. Any exhaust system may be utilized."

2026-02-01 GT2 Classify T1 BMW in GT2

#39408 from Jared Lendrum · Rule change · TB 26-02 (2026-02 Fastrack)

In GT Spec Lines, classify M3 E92 in GT Cars - BMW as follows:
GT Cars - BMW
Model Years Body Style Drive-
line
Wheel-
base (in)
Notes
M3 E92 (08-13) 2 Dr. RWD 108.7 Cannot be built to any other rule set.

A specification table follows in the original; it is not shown here.

2026-02-01 B-Spec C-Spec Rear Sway Bars

#39652 from B-Spec/C-Spec Committee · Rule change · TB 26-02 (2026-02 Fastrack)

In C-Spec Spec Lines, change Notes as follows:
Chevrolet Cruze (2010-16):
"Allow BC Racing Q-06-BR suspension kit or RedShift Q-06-CSPEC. Allow Babyface Fabrication brake caliper piston SNC-
SS. Approved parts: BC Racing Q-06-BR or RedShift Q-06-CSPEC suspension kit, Babyface Fabrication brake caliper piston SNC-
SS, ZZ Performance ZZ-SNCRSB or Whiteline BHR93 rear sway bar.
Dodge Dart (2014-16):
"Allow BC Racing or RedShift Z-06-CSPEC kit. Approved parts: BC Racing Z-06-BR or RedShift Z-06-CSPEC kit, Progress rear sway
bar 62.0606."

2026-02-01 T1 LS1 into Corvette C6 Spec Line Request

#39716 from Danny Kellermeyerhttps://crbscca.com/secu · Rule change · TB 26-02 (2026-02 Fastrack)

In T1 Spec Lines, reinstate Spec Line # 1139, Chevrolet Corvette C6 (05-13) Includes Z51, GrandSport, Z06, Z06 Carbon, as
follows:
Max Displ: "LS1, LS6 OEM"
Min Weight: "3200"
Required Restrictor: "70mm"