T1 + T4 + B-Spec at Buttonwillow Raceway Park

2024-03-01 T4 Reorganize Spec Lines

#35375 from Touring Committee · Rule change · TB 24-03 (2024-03 Fastrack)

In T2-T4 Spec Lines, change Spec Line as follows:
"Wheel- base (mm) Required Restrictor"

2024-03-01 B-Spec BOP Adjustment for Yaris iA, 2020+ Versa, and 07-08 Honda Fit

#35382 from Matt Wolfe · Rule change · TB 24-03 (2024-03 Fastrack)

In B-Spec Spec Lines, Honda Fit (07-08), change as follows:
Min weight: "2525 2400"
Notes: "Any Cold Air Intake Package allowed (any manufacturer). This configuration is not currently eligible for Runoffs
competition. This car must compete in three (3) separate Super Tour weekends so that performance data can be collected. In
addition to SCCA data box, OBDII data collected via an AIM or similar device must be submitted."
In B-Spec Spec Lines, Honda Fit (07-08) Automatic, change as follows:
Min weight: "2525 2400"
Add to Notes: "Any Cold Air Intake Package allowed (any manufacturer). This configuration is not currently eligible for Runoffs

2024-03-01 T1 9.1.9.1 T1 new category item/ line 26 rule to expire Jan 1 2023

#35411 from Geoffrey Hegel · Rule change · TB 24-03 (2024-03 Fastrack)

In T1 Spec Lines, classify Pontiac GTO 2006-2009 as Spec Line Number 1590 as follows:

A specification table follows in the original; it is not shown here.

2024-03-01 T4 Allow any 400lb rear spring in the RX8

#35433 from Raymond Blethen · Rule change · TB 24-03 (2024-03 Fastrack)

In T4 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), change Notes as follows:
"Mazda Motorsports- 0000- 04-9700-08 or Eibach- 0800.250.0700 (R) Mazda Motorsports- 0000-04-9400-07 or Eibach
0700.250.0400, and helper 0000-04-9926 allowed. Springs allowed 700lb (f), 400(r)."

2024-03-01 B-Spec 07-08 Honda Fit Rear Sway Bar part #

#35473 from B-Spec/C-Spec Committee · Rule change · TB 24-03 (2024-03 Fastrack)

In B-Spec Spec Lines, Honda Fit (07-08) Automatic, change Notes as follows:
"Allow rear sway bar Progress # 62.1061 0."
In B-Spec Spec Lines, Honda Fit (07-08), add to Notes the following:
"Allow rear sway bar Progress # 62.1060."

2024-03-01 T4 370Z Brake Rotor Size Correction

#35487 from Derek Chan · Rule change · TB 24-03 (2024-03 Fastrack)

In T2 Spec Lines, Nissan 370Z (09-17) / 370Z NISMO Edition (09-17), change Brakes (mm) as follows:
"(F)320 x 28 Vented R)320 x 16 Vented : (F) 355x32mm Vented(R) 350x20mm Vented”
In T3 Spec Lines, Nissan 370Z, incl. Nismo (2009-2022), change Brakes (mm) as follows:
"(F)320 x 28 Vented (R)320 x 16 Vented : (F) 355x32mm Vented(R) 350x20mm Vented”

2024-04-01 B-Spec Change restrictor from 30mm to 31mm (2015+ Honda Fit) and add 50#

#34857 from Matt Downing · Rule change · TB 24-04 (2024-04 Fastrack)

In B-Spec Spec Lines, Honda Fit MT (15-19), change as follows:
Weight: ""2525 2550"
Notes: "30 31mm"
In B-Spec Spec Lines, Honda Fit MT (15-19), change as follows:
Weight: ""2525 2550"
Notes: "30 31mm"

2024-04-01 B-Spec Wheel Offset and Spacer Revision

#35466 from Kent Carter · Rule change · TB 24-04 (2024-04 Fastrack)

In GCR, Section 9.1.10.E.8., change as follows:
"Wheels: All wheels shall be one-piece metal castings or metal two piece welded. Wheels of any offset are permitted provided
the tire tread (the portion of the tire that contacts the ground) does not protrude beyond the fender opening when viewed from
the top perpendicular to the ground. Wheel spacers and aftermarket wheel studs/bolts are permitted. Wheel bolts may be
replaced with studs and nuts. Total offset must be the same left to right for an individual axle but may differ from front to rear.
For B-Spec Required wheel/rim diameter is fifteen inches (15”). Maximum wheel/rim width is seven inches (7”). Minimum
Wheel/rim weight shall be 13 lbs.
For C-Spec Required wheel/ rim diameter is seventeen inches (17”). Maximum wheel/rim width is eight inches (8”). Minimum

2024-04-01 T1 Honda S2000

#35582 from Touring Committee · Rule change · TB 24-04 (2024-04 Fastrack)

In T1 Spec Lines, classify Honda S2000 as follows:

A specification table follows in the original; it is not shown here.

2024-04-01 B-Spec Set Expiration Date for Unused Spec Lines

#35742 from B-Spec/C-Spec Committee · Rule change · TB 24-04 (2024-04 Fastrack)

In B-Spec Spec Lines, Mini Cooper Countryman (R60) (11-16), add to Notes the following:
”**This Spec line will expire 1/1/2025 unless an appeal is filed on or before 12/1/2024.**”
In B-Spec Spec Lines, Mini Cooper Paceman (R61) (11-16), add to Notes the following:
”**This Spec line will expire 1/1/2025 unless an appeal is filed on or before 12/1/2024.** ”
In B-Spec Spec Lines, Nissan Versa (07-11) with 1797cc engine, add to Notes the following:
”**This Spec line will expire 1/1/2025 unless an appeal is filed on or before 12/1/2024.** ”

Applies to Mini Cooper on this page: Trenton Kramer, Thomas Lepper

2024-04-01 T4 Corrections to T4 RX8 Spec line

#35767 from Touring Committee · Rule change · TB 24-04 (2024-04 Fastrack)

In T4 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), change Notes as follows:
"Mazdaspeed radiator #0000-01-8501 allowed. Mazdaspeed coil spring kit #QSEA-34-01Z allowed. OE Rear spoiler allowed
#F151-V4-920F. OE front air dam allowed #F151-V4-900f-BB. Springs allowed 700lb (f) max, 400(r) max. Oil metering pump may
be bypassed. Alternate sway bars allowed max 32mm (f) 19mm (r)."

2024-05-01 B-Spec Delete trim levels/update language for spec lines

#35746 from B-Spec/C-Spec Committee · Rule change · TB 24-05 (2024-05 Fastrack)

In B-Spec Spec Lines, change Model description as follows:
"Chevrolet Sonic 4dr Sedan MT (12-19)"
"Chevrolet Sonic 4dr Sedan AT (12-19)"
"Chevrolet Sonic 5dr Hatch Hatchback MT (12-19)"
"Chevrolet Sonic 5dr Hatch Hatchback AT (12-19)"
"Ford Fiesta 5dr Hatchback (11-19)"
"Ford Fiesta 4dr Sedan (11-19)"
"Honda Fit MT (07-08)"

2024-05-01 T4 Allow T4 and T3 RX8 to Disable/Remove Factory Oil Inj.

#35761 from David Mead · Rule change · TB 24-05 (2024-05 Fastrack)

In T3 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), add to Notes as follows:
"OEM oil injection system may be removed or disabled."
In T4 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), add to Notes as follows:
"OEM oil injection system may be removed or disabled."

2024-05-01 T4 2023 ND2 Miata Classification and Allowances

#35837 from Coyote Black · Rule change · TB 24-05 (2024-05 Fastrack)

In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-21), change Year as follows:
"(19-21 24)"
In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-21), add to Notes as follows:
"Suspension package permitted with a 100 lbs. weight increase that includes the following parts: front springs #0000-04-9700-
08, springs up to 500lb front and 300lb rear allowed. Mazda tower brace 0000-04-5626 allowed."

2024-05-01 T4 Errors and Omissions for 06-09 VW Rabbit Rotor

#35851 from Andrew Burke · Rule change · TB 24-05 (2024-05 Fastrack)

In T4 Spec Lines, Volkswagen Rabbit 2.5 (06-09), change Brakes as follows:
"(F) 228 288 Vented Disc (R) 260 Solid Disc"

2024-05-01 T4 Driveshafts

#35916 from Scotty B White · Rule change · TB 24-05 (2024-05 Fastrack)

In GCR Section 9.1.9.2.D.4.b., add the following:
"6. T2-T3- Driveshafts may be replaced with alternative materials ie. carbon fiber, aluminum, steel. Two-piece driveshafts may
be replaced with one-piece units. If non-OEM driveshaft is used, add 25 lbs."

2024-05-01 T1 Please Expedite classing the C63 Mercedes

#35987 from Touring Committee · Rule change · TB 24-05 (2024-05 Fastrack)

In T1 Spec Lines, classify Mercedes AMG-C63 S (2023) as follows:

A specification table follows in the original; it is not shown here.

2024-05-01 T4 GCR ERROR - letter not properly applied to GCR

#35999 from Touring Committee · Rule change · TB 24-05 (2024-05 Fastrack)

In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), change Notes as follows:
"Factory bolt-in roll bar/ cross member may be removed to facilitate roll cage installation. The following item(s) must remain
stock: transmission differential unless specified below. Retractable hardtop option permitted but must be disabled from moving
action and positively fastened. Any OEM or aftermarket hardtop is permitted that retains the OEM roof silhouette, including
Mazda hardtop part #0000-07-5902-ND and part #0000-07-5901 (discontinued DG Motorsports). 29mm (f) 16mm (r) sway bars
allowed. Suspension package permitted with a 100 lbs. weight increase that includes the following parts: front springs #0000-
04-9700-08, rear springs #0000-04-9400-07, helper springs #0000-04-HLPR-EB (optional). Up to 500lb front and 300lb rear
springs allowed. Mazda Motorsports Header part #0000-06-5410 allowed. Mazda tower brace 0000-04-5626 allowed."

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2024-05-01 B-Spec Wheel Rules

#36066 from B-Spec/C-Spec Committee · Rule change · TB 24-05 (2024-05 Fastrack)

In GCR, Section 9.1.10.E.8., change as follows:
"Wheels: All wheels shall be one-piece metal castings or metal two piece welded. All four wheels must be the same dimensional
offset. Any offset is permitted so long as Wheels of any offset are permitted provided the tire tread (the that portion of the tire
that contacts the ground) does may not protrude beyond the fender opening when viewed from the top perpendicular to the
ground. Wheel spacers and aA ftermarket wheel studs/ and or wheel bolts are permitted allowed. Wheel bolts may be replaced
with studs and nuts. Wheel spacers are allowed, but must be the same thickness on all four corners.Total offset must be the
same left to right for an individual axle but may differ from front to rear.
B-Spec Required wheel/rim diameter is fifteen inches (15”). Maximum wheel/rim width is seven inches (7”). Minimum

2024-06-01 T4 Allow OEM Front Spoiler 06-08 Miata in T4

#35941 from David Mead · Rule change · TB 24-06 (2024-06 Fastrack)

In T4 Spec Lines, Mazda MX-5 / Club Model (06-15), add to Notes the following: "Front
spoiler permitted (NF51-V4-900F)."

Applies to Mazda MX-5 on this page: Oscar Jackson

2024-06-01 B-Spec Add B14 Kit Part # to Sonic Spec line In

#35969 from B-Spec/C-Spec Committee · Rule change · TB 24-06 (2024-06 Fastrack)

B-Spec Spec Lines, change Notes follows:
Chevrolet Sonic Sedan MT (12-19): "33mm flat plate restrictor required. GM suspension kit #2312 → 3679 permitted. Bilstein B14 kit
#47-171725 verified compatible."
Chevrolet Sonic Sedan AT (12-19): "33mm flat plate restrictor required. GM suspension kit #2312 → 3679 permitted. Bilstein B14 kit
#47-171725 verified compatible."
Chevrolet Sonic Hatchback MT (12-19): "34mm flat plate restrictor required. GM suspension kit #2312 → 3679 permitted. Bilstein
B14 kit #47-171725 verified compatible."
Chevrolet Sonic Hatchback AT (12-19): "34mm flat plate restrictor required. GM suspension kit #2312 → 3679 permitted. Bilstein

2024-06-01 B-Spec Eliminate redundant sway bar end link part #s from notes In

#35970 from B-Spec/C-Spec Committee · Rule change · TB 24-06 (2024-06 Fastrack)

B-SPEC Spec Lines, elimination from Notes the following:
Mazda2 (10-14): "Front sway bar end links adjstbl 0000-04-2202,"
Mini Cooper Hatchback (R50) MT (02 - 06): "Front adjustable sway bar links part number 31 35 6 771 is allowed. Rear adjustable
sway bar links part number 35 50 6 772 is allowed."
Mini Cooper Hatchback (R50) CVT (02 - 06): "Front adjustable sway bar links part number 31 35 6 771 is allowed. Rear adjustable
sway bar links part number 35 50 6 772 is allowed."
Mini Cooper (R56) MT (07-10): "Front adjustable sway bar links part number 31 35 6 771 is allowed. Rear adjustable sway bar
links part number 35 50 6 772 is allowed."

2024-06-01 B-Spec Update Fiat 500 Spec line In

#35990 from B-Spec/C-Spec Committee · Rule change · TB 24-06 (2024-06 Fastrack)

B-SPEC Spec Lines, Fiat 500 (12-15), change year as follows: "Fiat 500 (12-
15 7)"

2024-06-01 T4 T4 Mustang Weight Reduction In T4 Spec

#36051 from Scotty B White · Rule change · TB 24-06 (2024-06 Fastrack)

Lines, Ford Mustang V6 (05-10), change as follows:
Weight: "3275 3225"
Notes: "14” Brembo Brake Kit#M-2300-S permitted."

2024-06-01 T4 R53 Mini Cooper S spec line request In

#36056 from Manvinder Singh · Rule change · TB 24-06 (2024-06 Fastrack)

T4 Spec Lines, Mini Cooper S (02-04), add to Notes the following:
"Milltek exhaust manifold #SSXM459 allowed. 25mm rear sway bar allowed."
T4 Spec Lines, Mini Cooper S (05-06), add to Notes the following:
"Milltek exhaust manifold #SSXM459 allowed. 25mm rear sway bar allowed."

2024-06-01 B-Spec Update (15-19) Honda Fit

#36067 from B-Spec/C-Spec Committee · Rule change · TB 24-06 (2024-06 Fastrack)

CVT Spec Line In B-SPEC Spec Lines, Honda Fit CVT (15-19), change as
follows:
Weight: "2525 2550"
Notes: "30 31mm"

2024-07-01 T4 Mustang T2/T3

#35877 from Scotty B White · Rule change · TB 24-07 (2024-07 Fastrack)

In T2 Spec Lines, Ford Mustang GT 5.0L (15-17), add to Notes as follows:
"Track/Performance Package parts permitted."
In T2 Spec Lines, Ford Mustang GT 5.0L (2018-), add to Notes as follows:
"Track/Performance Package parts permitted."
In T3 Spec Lines, Ford Mustang V6 (15-17), change Notes as follows:
"Track/Performance package allowed."

2024-07-01 T4 Homologation of car to T4

#36030 from Patrick E Morgan · Rule change · TB 24-07 (2024-07 Fastrack)

In T4 Spec Lines, Mercedes C300 4Matic (2008-2011), classify as follows:

A specification table follows in the original; it is not shown here.

2024-07-01 T4 T2-T4 Driveshaft Mistake...?

#36050 from Scotty B White · Rule change · TB 24-07 (2024-07 Fastrack)

In GCR Section 9.1.9.2.D.4.b.6., remove as follows:
"If non-OEM driveshaft is used, add 25 lbs."
In T2 Spec Lines, Ford Mustang V6 (11-14), change Notes as follows:
"Driveshaft from Alternate metallic driveshaft is allowed."
In T2 Spec Lines, Ford Mustang Boss 302 (12-13), change Notes as follows:
"Alternate metallic driveshaft is allowed."
In T2 Spec Lines, Ford Mustang GT 5.0L (11-14)ki, change Notes as follows:
"Alternate metallic driveshaft is allowed."

2024-07-01 B-Spec Clean up (15-19) Honda Fit MT & CVT Notes Sections

#36068 from B-Spec/C-Spec Committee · Rule change · TB 24-07 (2024-07 Fastrack)

In B-Spec Spec Lines, Honda Fit MT (15-19), change notes as follows:
"31mm flat plate restrictor required. Allow damper FR LH 51605F23SA81, Damper FR RH FR RH 51606F23SA81,
Damper RR 52610F23SA80, Spring adjust assy RR 52691F23SA80, Bushing Comp, Damper RR TBD, Camber
Adjuster Comp, Damper 51920F23SA82, Damper wrench kit 89211F23SA80, Hose Set, FR & RR Brake
01464F23SA810, Pad Set, XR2 D948 54022F27SA81, Disk, FR Brake 45250F23SA80, Air cleaner element assy
17220FC4YA80, Exhaust pipe assy 18300F23SA81, ACG belt (6PK858) 31110FC4YA80. Allow rear sway bar
Progress 62.1063."
In B-Spec Spec Lines, Honda Fit CVT (15-19), change notes as follows:

2024-07-01 B-Spec Set expiration date for Nissan Versa (09-11)

#36069 from B-Spec/C-Spec Committee · Rule change · TB 24-07 (2024-07 Fastrack)

In B-Spec Spec Lines, Nissan Versa (09-11), add to notes the following:
"**This Spec line will expire 1/1/2025 unless an appeal is filed on or before 12/1/2024.**"

2024-07-01 B-Spec Delete Redundant Rule 25

#36075 from B-Spec/C-Spec Committee · Rule change · TB 24-07 (2024-07 Fastrack)

In B-Spec, GCR Section 9.1.10.E.25., remove in its entirety and renumber.

2024-07-01 T4 MINI Cooper S Spec Lines Corrections.

#36086 from David Oliveira · Rule change · TB 24-07 (2024-07 Fastrack)

In T4 Spec Lines, Mini Cooper S (02-04), delete spec line in its entirety.
In T4 Spec Lines, Mini Cooper S (05-06), change Model as follows:
"Mini Cooper S R53 (0205-06)"
In T4 Spec Lines, Mini Cooper S (07-13), change Model and Notes as follows:
"Mini Cooper S R56 (07-13)"
Notes: "The following items must remain stock: shock/struts (including mounts), original wheels, and transmission
differential - unless specified below. Convertible model not allowed. Factory optional limited slip differential allowed.
JCW struts (F) 31 31 6 768 410 (R)33 52 6 768 412, springs (F)31 33 6 768 415 (R)33 53 6 768 418. May de-camber

2024-07-01 T4 Allow Removal of Sound Tubes

#36130 from Coyote Black · Rule change · TB 24-07 (2024-07 Fastrack)

In GCR Section 9.1.9.2.D.1.b., add the following:
"2. OEM intake- Chambers, resonators and acoustic devices may be removed, provided; that their ports are located
prior to any required restrictor, their ports are completely sealed, and that the part serves no other purpose."

2024-07-01 B-Spec Correct error for rear brakes of Hyundai/Kia

#36174 from B-Spec/C-Spec Committee · Rule change · TB 24-07 (2024-07 Fastrack)

In B-Spec Spec Lines, Hyundai Accent Hatchback (12-19), change brakes as follows:
"(R) 9.9 drum or 10.3 drum disc"
In B-Spec Spec Lines, Kia Rio Hatchback (12-19), change brakes as follows:
"(R) 10.3 drum disc"

2024-07-01 T4 B8/8.5 Audi S4 T3 and T2

#36195 from Brian Leib · Rule change · TB 24-07 (2024-07 Fastrack)

In T3 Spec Lines, Classify Audi S4 (2000-2002) as follows and allow the T2 spec line to expire.

A specification table follows in the original; it is not shown here.

2024-08-01 B-Spec Update Tire Rules

#35984 from B-Spec/C-Spec Committee · Rule change · TB 24-08 (2024-08 Fastrack)

In GCR Section 9.1.10.E.7. change as follows:
"a. For the remainder of 2023, B-Spec entrants will be allowed to compete on both Hankook and Goodyear Tires. For B-
Spec: tires shall be Hankook 205/50R15 C51, Hankook 200/580R15 Z217, P205/50Z R15 Goodyear Eagle RS (Dry tire) Catalog
#D4850 or P205/50ZR15 Goodyear Eagle RS-R (Wet tire) Catalog #D4851. Effective 1-1-2024 Hankook Tires will be allowed at
regional events only, through 6-30-2024. Effective 7-1-2024 Goodyear is the only legal specified tire allowed in B-spec for all
events. Mixing wet and dry tires is not permitted. Tires may not be modified. All B-Spec competitors are required to place two (2)
12-inch or larger “Goodyear” decals on their cars, one on each side of the car above the front tire.
C-Spec: Tires shall be 225/45R17. No Mixing of wet and dry tires on the same car is not permitted. Tires must be run unmodified.

2024-08-01 B-Spec BOP help for the automatic B-Specs

#36161 from B-Spec/C-Spec Committee · Rule change · TB 24-08 (2024-08 Fastrack)

In B-Spec Spec Lines, change as follows:
Chevrolet Sonic Sedan AT
Notes: "33 5mm"
Chevrolet Sonic Hatchback AT
Notes: "34 6mm"
Honda Fit AT (07-08)
Weight (lbs): "2400 2350"
Notes: "Any aftermarket header allowed."

2024-08-01 T4 T4 Camaro V6 weight reduction

#36232 from Ted Warning · Rule change · TB 24-08 (2024-08 Fastrack)

In T4 Spec Lines, Chevrolet Camaro V-6 (96-02), change weight as follows:
"3250 3150"

2024-08-01 B-Spec Require hood pins

#36233 from Frank Schwartz · Rule change · TB 24-08 (2024-08 Fastrack)

In GCR, Section 9.1.10.E.41., change as follows:
"Optional Hood Pins may be added to supplement the original hood latch system. All parts of the original hood latch system
must remain in the car. Installation of hood pins is recommended but not required. If hood pins are used, the factory release and
cable must be removed, but the secondary latch may be retained. Vehicles equipped with plastic release cables may replace them
with steel units. The OEM hood release latch may be relocated."

2024-08-01 B-Spec Sonic Caliper Pistons

#36238 from Jonathan Wickert · Rule change · TB 24-08 (2024-08 Fastrack)

In B-Spec Spec Lines, change Chevrolet Sonic Sedan MT (12-19), add to Notes the following:
"Allow Babyface Fabrication brake caliper piston SNC-SS."
In B-Spec Spec Lines, change Chevrolet Sonic Sedan AT (12-19), add to Notes the following:
"Allow Babyface Fabrication brake caliper piston SNC-SS."
In B-Spec Spec Lines, change Chevrolet Sonic Hatchback MT (12-19), add to Notes the following:
"Allow Babyface Fabrication brake caliper piston SNC-SS."
In B-Spec Spec Lines, change Chevrolet Sonic Hatchback AT (12-19), add to Notes the following:
"Allow Babyface Fabrication brake caliper piston SNC-SS."

2024-08-01 T4 BOP adjustment for ND MX5s

#36345 from Touring Committee · Rule change · TB 24-08 (2024-08 Fastrack)

In T4 Spec Lines, change Weight (lbs) as follows:
Mazda MX-5 Miata/Club (16-18): "2700 2650"
Mazda MX5 Miata/Club/ RF (19-24): "2800 2750"

2024-11-01 B-Spec Scion IA/Toyota Yaris/Mazda 2 DY chassis suspension

#35780 from Derrick Ambrose · Rule change · TB 24-09 (2024-09 Fastrack)

In B-Spec Spec Lines, Toyota/Scion IA Sedan (16-20), change Notes as follows:
"38mm FPR. (Effective 11/1/2024) Allow ST Suspension Kit 13275022. This configuration is not currently eligible for Runoffs
competition. This car must compete in three (3) separate Super Tour weekends so that performance data can be collected. In
addition to SCCA data box, OBDII data collected via an AIM or similar device must be submitted."

2024-11-01 B-Spec Clean up 07-08 Honda Fit AT Notes Section

#36542 from B-Spec/C-Spec Committee · Rule change · TB 24-09 (2024-09 Fastrack)

In B-Spec Spec Lines, Honda Fit AT 07-08, change Notes as follows:
"(Effective 11/1/2024) Allow damper and spring set 51600F23SA100, Damper FR LH 51605F23SA100, Damper FR RH
51606F23SA100, Damper RR 52610F23SA100, Spring adjust asy RR 52691F23SA010. Seat upper FR spring 51688F23SA200,
51402FC4YA00 front helper spring and 51403FC4YA00 front spacer permitted. Front Damper Mount P/N 51920-F23S-A30 is
allowed. Allow rear sway bar Progress # 62.1060. Any Cold Air Intake Package allowed (any manufacturer). This configuration is
not currently eligible for Runoffs competition. This car must compete in three (3) separate Super Tour weekends so that
performance data can be collected. In addition to SCCA data box, OBDII data collected via an AIM or similar device must be
submitted."

2024-11-01 T4 Bop Request 06-11 Honda Civic Si

#37013 from Mathew Milford · Rule change · TB 24-11 (2024-11 Fastrack)

In T4 Spec Lines, Honda Civic Si (06-11), add to Notes the following:
"LSD is permitted according to category rules."

2024-12-01 T1 Changes to T1 Tires for GT4 and Other Cars

#35383 from Andrew Aquilante · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 GT4 Spec Lines, change Tire Size as follows:
Aston Martin Vantage AMR GT4 4010: "315 DOT, 305/660 Non-DOT"
Audi R8 GT4 - Spec Line #4020: "315 DOT, 305/645 Non-DOT"
BMW M4 GT4 - Spec Line #4030: "315 DOT, 305/660 Non-DOT"
Chevrolet Camaro GT4-R- Spec Line #4035: "315 DOT, 305/680 Non-DOT"
Ford Mustang GT4 - Spec Line #4040: "315 DOT, 315/680 Non-DOT"
Mclaren 570S GT4 - Spec Line #4050: "315 DOT, 305/645 Non-DOT"
Mercedes AMG GT4 - Spec Line #4060: "315 DOT, 305/660 Non-DOT"

2024-12-01 T1 G82 M4 GT4 inclusion in T1

#35864 from Denny Stripling · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 GT4 Spec Lines, SL#4030, change as follows:
Model: "BMW M4 GT4 (F82)"
Performance Control: "Gold power stick Red power stick"
In T1 GT4 Spec Lines, classify BMW M4 GT4 (G82) as follows:

A specification table follows in the original; it is not shown here.

2024-12-01 T4 Redundant Verbiage Regarding Mustang Spec Lines for Driveshaft

#36484 from David Mead · Rule change · TB 24-12 (2024-12 Fastrack)

In T2 Spec Lines, change Notes as follows:
Ford Mustang V6 (11-14): "Alternate driveshaft is allowed."
Ford Mustang Boss 302 (12-13): "Alternate driveshaft is allowed."
Ford Mustang GT 5.0L (11-14): "Alternate driveshaft is allowed."
Ford Mustang GT 5.0L (15-17): "Alternate driveshaft is allowed."
Ford Mustang GT 5.0L (2018-): "Alternate driveshaft is allowed. Springs up to 800#/in front and rear permitted. Alternate
metallic driveshaft permitted."
Ford Mustang Coupe GT & Shelby GT 4.6L (05-10): "Alternate driveshaft is allowed."

2024-12-01 T1 Alt. Clutch Allowance

#36606 from Hugh Stewart · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 Spec Lines, SL# 1050, change add to Engine Notes the following:
"5.5 inch clutch permitted."

2024-12-01 T4 R53 Mini Cooper S Weight Reduction Request

#36612 from Manvinder Singh · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, Mini Cooper S R53 (02-06), add to Notes as follows:
"Alta 15% Pulley #AMPENG20X allowed."

2024-12-01 T1 BOP Changes Need Updates

#36667 from Joe Rainey · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 GT4 Spec Lines, Spec Line 4020, change as follows:
Performance Control: Power level 2020, 44mm 45mm SRO compliant restrictor"
Min. Weight with driver (LBS): "3550 3400"

2024-12-01 T4 Allowable Wheel Offset

#36855 from Robert Maples · Rule change · TB 24-12 (2024-12 Fastrack)

In GCR Section 9.1.9.2.D.7. Wheels and Tires, change as follows:
"a. Wheels
1. Any type wheel suitable for competition may be used, provided:
a. Any wheel not exceeding the specified diameter and rim width on the vehicle’s specification line may be used. Each wheel,
measured without weights, must weigh at least 15 lbs.
b. Wheels are permitted any offset provided the tire tread (that portion of the tire that contacts the ground) does not protrude
beyond the fender opening when viewed from 9.1.9.2.Touring (T2-T4) Category Specifications GCR - 660 the top perpendicular
to the ground, unless specified differently on the individual spec line for that car. To determine compliance the vehicle should be

2024-12-01 T4 Fuel Emissions Components

#37076 from Derrick Ambrose · Rule change · TB 24-12 (2024-12 Fastrack)

In GCR, Section 9.1.9.2.D.1.c. add the following:
"5. Removal of ancillary fuel tank equipment charcoal canisters, emissions valves, and sensors allowed for OEM or aftermarket
fuel cell installations."

2024-12-01 T4 2019-2024 Mazda 3 for T4

#37077 from Derrick Ambrose · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, classify Mazda 3 (19-24), as follows:

A specification table follows in the original; it is not shown here.

2024-12-01 T4 fix brake wording

#37129 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

In GCR, Section, 9.1.9.2.D.6. Brakes, change as follows:
"a. Components
1. The make and material of brake pads and linings may be changed.
2. Brake fluid may be substituted with any brake fluid.
3. Brake rotor dust shields may be removed or replaced to accommodate brake ducts.
4. Flexible rubber brake lines may be replaced with Teflon lined, metal braided hoses.
5. Any brake ducts are permitted, but they must serve no other purpose. Fender liners may be modified solely for routing and
attachment of brake ducts. Duct intake openings may be created by the opening of 2 sections up to 14.5 square inches each in

2024-12-01 T4 Evaporative emissions systems

#37130 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

In GCR, Section, 9.1.9.2.D.1.c., add the following:
"5. Removal of ancillary fuel tank equipment; charcoal canisters, emissions valves, and sensors allowed for OEM or aftermarket
fuel cell installations."

2024-12-01 T1 Request Ford Performance Darkhorse R in T1

#37136 from Christopher Childs · Rule change · TB 24-12 (2024-12 Fastrack)

In T1-Homologated Cars Spec Line, classify Mustang Darkhorse R (Mustang Challenge) as follows:
T1 – Homologated Cars

A specification table follows in the original; it is not shown here.

2024-12-01 T4 Allow Spec MX5 upgrade kit for 2009-11 RX8 S2 Transmision

#37140 from Chris Braunlich · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, add the following to Notes:
Mazda RX-8 Base/R3/Sport/ GT (04-12): "Transmission kit # 0000-02-5700 permitted.
Mazda MX-5 / Club Model (06-15): "Transmission kit # 0000-02-5700 permitted."
In T3 Spec Lines, add the following to Notes:
Mazda MX-5 / Club Model (06-15): "Transmission kit # 0000-02-5700 permitted."
Mazda RX-8 Base/R3/Sport/ GT (04-12): "Transmission kit # 0000-02-5700 permitted."

2024-12-01 T4 Move Spec Boxster to T4

#37158 from Rob Piekarczyk · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, classify Porsche Spec Boxster, as follows:

A specification table follows in the original; it is not shown here.

Applies to Porsche Boxster on this page: Lynne Griffiths

2024-12-01 T1 Car Mods for T1 Corvette under line item 1150

#37173 from Thomas Napolitano · Rule change · TB 24-12 (2024-12 Fastrack)

In GCR, Section 9.1.9.1.A.2,, add the following:
"It is permitted to roll under or flatten any interior lip on the wheel opening for tire clearance. Cars with plastic/composite
fenders may remove any interior wheel opening lip, but the resulting material edge shall be no thinner than the basic fender
material thickness. Non-metallic inner fender liners may be removed. Vents may be added to fenders."

2024-12-01 T4 3.7 Mustangs to T4

#37188 from Scotty B White · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, classify Ford Mustang V6 (05-14), as follows:

A specification table follows in the original; it is not shown here.

2024-12-01 T4 BMW 320i Spec Line

#37204 from chi ho · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, BMW 320i (14-15), change Notes as follows:
"**This Spec line will expire 12/31/24, Please submit to appeal** Turner Motorsports intercooler #024703TMS02 allowed."

2024-12-01 T4 MX5 2006-2015 NC Help

#37221 from Richard Mooney · Rule change · TB 24-12 (2024-12 Fastrack)

Thank you for your letter. Please see changes in letter #37281 in current Fastrack.

2024-12-01 T4 Classification for a 2005 Cadillac CTS 3.6 liter 6 speed manual

#37224 from Timothy Nash · Rule change · TB 24-12 (2024-12 Fastrack)

In T3 Spec Lines, classify Cadillac CTS (02-07) as follows:

2024-12-01 T4 Civic SI in T4

#37248 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, Honda Civic Si (06-11), change as follows:
Required Restrictor: "55mm flat plate restrictor required."
Min Weight: "2950 2900"
Notes: "The following items must remain stock: transmission differential - unless specified below. 55mm flat plate restrictor
required. LSD IS PERMITTED ACCORDING TO CATEGORY RULES"

2024-12-01 T1 Increased Bore Throttle Bodies for E46 M3 S54 Engine

#37273 from Mark Pfeffer · Rule change · TB 24-12 (2024-12 Fastrack)

In T1 Spec Lines, E46 M3 Spec Line # 1050, add to Engine Notes the following:
"Dinan Throttle Body #D760-3400 allowed on the 3.250L."

2024-12-01 T4 2006-2015 T4 NC Mx5 spec line

#37278 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, Mazda MX-5 / Club Model (06-15), change Notes as follows:
"Factory bolt-in roll bar/cross member may be removed to facilitate roll cage installation. MSR option permitted. Suspension
package permitted with a 100 lbs. weight increase that includes the following parts: front spring mount PT#-0000-04-5259, front
springs #0000-04-9700-08, rear spring mount PT#-0000-04-5258, rear springs #0000-04-9400-07, helper springs #0000-04-HLPR-
EB (optional), Swaybar kit – PT#-0000-04-5306-EB that includes (front sway bar kit PT#0000-04- 5306-FT, rear sway bar kit PT#-
0000-04-5306-RR), offset front camber bushing PT#-0000-04- 5407-NC. Mazda Motorsports cold air intake part #0000-06-5150-
KT allowed. Mazda Motorsport RX8 rear Hub Conversion kit part number 0000-04-5811-KT allowed, RX8 front hubs PT# F189-33-
04X allowed. The SM5 suspension (only) is allowed with a 100 lbs. weight increase. Allow Mazda header part numbers 0000-06-

Applies to Mazda MX-5 on this page: Oscar Jackson

2024-12-01 T4 ND MX-5 wheel allowance

#37279 from Josh Smith · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), change Wheel Size as follows:
"17 x 7.5"

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2024-12-01 T4 T4 BOP

#37281 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), change as follows:
Required Restrictor: "60mm 59mm"
Weight: "3125 3200"
In T4 Spec Lines, Mazda MX-5 / Club Model (06-15), change weight as follows:
"2600 2550"

Applies to Mazda MX-5 on this page: Oscar Jackson

2024-12-01 T4 Allow 7.5

#37286 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-24), change Wheel Size as follows:
"17 x 7.5"

2025-01-01 B-Spec Remove wheelbase from spec lines and replace with Restrictor

#36074 from B-Spec/C-Spec Committee · Rule change · TB 24-11 (2024-11 Fastrack)

In B-Spec Spec Lines that are not expiring on 1/1/25, replace Wheelbase as follows:
"(Effective 1/1/2025)Wheelbase Restrictor (mm)"
In B-Spec Spec Lines, update the value in the spec lines under the Restrictor column as follows effective 1/1/2025:
Chevrolet Sonic Sedan MT (12-19): "2525 33"
Chevrolet Sonic Sedan AT (12-19): "2525 35"
Chevrolet Sonic Hatchback MT (12-19): "2525 34"
Chevrolet Sonic Hatchback AT (12-19): "2525 36"
Fiat 500 (12-17): "2300"

2025-01-01 B-Spec Bilstein Rear Shock Request for Hyundai Accent/Kia Rio

#36965 from Alex Ratcliffe · Rule change · TB 25-01 (2025-01 Fastrack)

In B-Spec Spec Lines, Hyundai Accent Hatchback (12-19), add to Notes the following:
"Bilstein B8 shock 33-187112 approved for use in rear suspension."
In B-Spec Spec Lines, Kia Rio Hatchback (12-19), add to Notes the following:
"Bilstein B8 shock 33-187112 approved for use in rear suspension."

2025-01-01 T4 2016-2018 Mazda Miata MX5

#37085 from Nic Piekarski · Rule change · TB 25-01 (2025-01 Fastrack)

In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), change Min Weight as follows:
"2650 2575"
In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-24), add to Notes the following:
"Mazda header 0000-06-5410 allowed."

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2025-01-01 T4 Remove spec lines that have expired

#37269 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

In T2, Effective 1/1/2025, delete for following Spec Lines in their entirety:
"Acura TL SHAWD (10-13)
Audi S4 (12-14)
Audi S5 (13-14)
Audi TT RS (2018-)
Cadillac ATS-V (16-17)
Cadillac CTS-V (06-07)
Chevrolet Camaro SS (98-02)

2025-02-01 T1 T1 Parity Compared to GT4

#37170 from Tony Ave · Rule change · TB 25-02 (2025-02 Fastrack)

In T1 Spec Lines, change Weight and Restrictor Required as follows:
Mustang - Spec Line 1430
Weight: "3475 3600"
Restrictor Required: "65mm 60mm - FPR"
Corvette Spec Line 1190
Weight: "3450 3500"
Restrictor Required: "70mm 67mm - Flat Plate"
In T1 Spec Lines, delete Spec Line BMW # 1190 in its entirety.

2025-02-01 B-Spec Remove Redundant Language from Notes Sections

#37337 from B-Spec/C-Spec Committee · Rule change · TB 25-02 (2025-02 Fastrack)

In B-Spec Spec Lines, Honda Fit AT (07-08), change Notes as follows:
"Allow damper and spring set 51600F23SA100, Damper FR LH 51605F23SA100, Damper FR RH 51606F23SA100, Damper RR
52610F23SA100, Spring adjust asy RR 52691F23SA010. Seat upper FR spring 51688F23SA200, 51402FC4YA00 front helper spring
and 51403FC4YA00 front spacer permitted. Front Damper Mount P/N 51920-F23S-A30 is allowed. Allow rear sway bar Progress
# 62.1060. Any Cold Air Intake Package allowed (any manufacturer). This configuration is not currently eligible for Runoffs
competition. This car must compete in three (3) separate Super Tour weekends so that performance data can be collected. In
addition to SCCA data box, OBDII data collected via an AIM or similar device must be submitted. Any aftermarket header
allowed. Allow rear sway bar Progress # 62.1060. Any Cold Air Intake Package allowed (any manufacturer). This configuration is

Applies to Mini Cooper on this page: Trenton Kramer, Thomas Lepper

Applies to Toyota Yaris on this page: Joseph Gersch

2025-02-01 T1 Clarification of Request Approval #37273

#37399 from Mark Pfeffer · Rule change · TB 25-02 (2025-02 Fastrack)

In T1 Spec Lines, E46 M3 Spec Line # 1050, change Engine Notes as follows:
"Dinan Throttle Body #D760-3400 VAC Motorsports #VAC-TB-S54 allowed on the 3.250L."

2025-02-01 T1 C8 Corvette Facts

#37400 from Garry Crook · Rule change · TB 25-02 (2025-02 Fastrack)

In T1 Spec Lines, Chevrolet Corvette C8 (20- 23) - Includes Z51, Spec Line # 1210, change Min. Weight as follows:
"3600 3500"

2025-02-01 T1 Camaro Gen 5 Competitive Disadvantage

#37440 from Clark Nunes · Rule change · TB 25-02 (2025-02 Fastrack)

In T1 Spec Lines, Chevrolet Camaro Gen 5 (10-15) Including SS, Z28 Spec Line 1135, change Required Restrictor as follows:
"75mm 80mm - Flat Plate"

2025-02-01 T1 Tire Changes in the Rules for GT4

#37497 from Joe Rainey · Rule change · TB 25-02 (2025-02 Fastrack)

In T1-GT4 Spec Lines, Audi R8 GT4 Spec Line #4020, change Max Tire Size as follows:
"315 DOT, 305/645, or 30/65-18 (f), 33/68-18 (r) Non-DOT"

2025-02-01 T4 Ford Mustang V6 (05-14)

#37516 from Touring Committee · Rule change · TB 25-02 (2025-02 Fastrack)

In T4 Spec Lines, Ford Mustang V6 (05-14), change as follows:
Final drive: "3.45"
Notes: "GT/CS front bumper cover #AR3Z-17D957-BA, allowed if used with front fascia."

2025-02-01 B-Spec Expire designated spec lines

#37517 from B-Spec/C-Spec Committee · Rule change · TB 25-02 (2025-02 Fastrack)

In B-Spec Spec Lines, delete the following spec lines effective 2/1/25 in their entirety:
"Mini Cooper Countryman (R60) (11-16)"
"Cooper Paceman (R61) (11-16)"
"Nissan Versa (07-11)"
"Nissan Versa (09-11)"

2025-02-01 B-Spec Set expiration date for Nissan Micra Cup Cars (Canadian)

#37519 from B-Spec/C-Spec Committee · Rule change · TB 25-02 (2025-02 Fastrack)

In B-Spec Spec Lines, Nissan Micra Cup Car, add to Notes the following:
"This spec line will expire on 7/1/25 unless an appeal is submitted by 6/30/25."

2025-02-01 T4 Request to Classify Club Spec in Appropriate Touring Classes

#37523 from Andrew Benagh · Rule change · TB 25-02 (2025-02 Fastrack)

In T3 Spec Lines, classify Ford SCCA Club Spec Mustang (CSM) as follows:

A specification table follows in the original; it is not shown here.

Applies to Mazda MX-5 on this page: Oscar Jackson

2025-03-01 B-Spec Toyota Yaris Hatchback (12-18) rear disc brakes

#37530 from B-Spec/C-Spec Committee · Rule change · TB 25-03 (2025-03 Fastrack)

In B-Spec Spec Lines, Toyota Yaris Hatchback (12-18), please add to Brakes (inches) as follows:
"(F) 10.0 (R) 7.9 drum or 10.2 disc"

2025-03-01 B-Spec Yaris Speed Sensor

#37536 from B-Spec/C-Spec Committee · Rule change · TB 25-03 (2025-03 Fastrack)

In B-Spec Spec Lines, Toyota Yaris Hatchback (12-18) AND Toyota Yaris Sedan (07-12), add to Notes the following:
"Speed sensor may be disconnected."

2025-03-01 B-Spec Set Expiration Date For Fiat 500

#37689 from B-Spec/C-Spec Committee · Rule change · TB 25-03 (2025-03 Fastrack)

In B-Spec Spec Lines, Fiat 500 (12-17), please add to Notes the following language:
"This spec line will expire on 1/1/26 unless an appeal is filed."

2025-03-01 T1 Correct and make new T1 BOP adjustments.

#37737 from Touring Committee · Rule change · TB 25-03 (2025-03 Fastrack)

In T1 Spec Lines, change Weight, Restrictor Required and/or Notes as follows:
Mustang - Spec Line 1430:
Restrictor Required: "60mm 65mm - FPR"
Mustang - Spec Line 1460:
Weight: "3425 3500"
Restrictor Required: "70mm - FPR"
Corvette Spec Line 1190:
Restrictor Required: "67mm 70mm - Flat Plate"

2025-04-01 B-Spec 2025 BOP Recommendations

#37520 from B-Spec/C-Spec Committee · Rule change · TB 25-04 (2025-04 Fastrack)

In B-SPEC Spec Lines, change as follows:
Honda Fit MT (09-14): "Any Cold Air Intake Package allowed (any manufacturer) Allow Injen Intake SP1512, K&N Intake 69-
1017TTK, or HPS intake 827-102 with a 25lb adder."
Mazda2 (10-14): "Exhaust Header (cat delete) HB.EM 60-404-S-SS, HP-MZD001 allowed with a 50lb adder, or Mazda
Motorsports PN 0000- 06-2410 permitted with no weight adder."
Mini Cooper (R56) MT (07-10): "44 5 FPR (OE Catalyst)"
Mini Cooper (R56) AT (07-10): "46 7 FPR (OE Catalyst)"
Mini Cooper Clubman (R55) (07-10): "44 5 FPR (OE Catalyst)"

2025-04-01 B-Spec Hyundai/Toyota Factory Rear Disc Models

#37534 from B-Spec/C-Spec Committee · Rule change · TB 25-04 (2025-04 Fastrack)

In B-SPEC Spec Lines, add to Notes the following:
Hyundai Accent Hatchback (12-19): "Vehicles equipped with rear drum brakes subtract 25 lb."
Toyota Yaris Hatchback (12-18): "Vehicles equipped with rear disc brakes add 25 lb."

2025-04-01 B-Spec Request to Update the Spec line for Hyundai Accent and Kia Rio

#37880 from Alex Ratcliffe · Rule change · TB 25-04 (2025-04 Fastrack)

In B-SPEC Spec Lines, add to Notes as follows:
Hyundai Accent Hatchback (12-19): "Bilstein B14 kit #4716 → 7490 front shocks verified compatible. Allow BabyFace Fabrication
sump extension #BF-HYU-PAN."
Kia Rio Hatchback (12-19): "Bilstein B14 kit #4716 → 7490 front shocks verified compatible. Allow BabyFace Fabrication sump
extension #BF-HYU-PAN."

2025-04-01 T1 Cadillac CT4-V Blackwing

#38003 from Touring Committee · Rule change · TB 25-04 (2025-04 Fastrack)

In T1 Spec Lines, classify Cadillac CT4-V Blackwing as follows:

A specification table follows in the original; it is not shown here.

2025-05-01 T1 Acceptance of Porsche 981 GT4 Clubsport into T1

#36664 from John Brown · Rule change · TB 25-05 (2025-05 Fastrack)

In T1-GT4 Spec Lines, classify Porsche 981 GT4 Clubsport as follows:

A specification table follows in the original; it is not shown here.

2025-05-01 T1 Request to Restore T1 Honda S2000 to Proper Weights

#37644 from David Mead · Rule change · TB 25-05 (2025-05 Fastrack)

In T1 Spec Lines, Honda S2000, Spec Line 1530, change as follows:
Minimum Weight: "2950 2900"
Chassis Notes: "This spec line is set to expire as of 12/31/2025 if not represented in Majors competition in 2025."

2025-05-01 B-Spec Correct Hyundai/Kia Model Years

#37943 from B-Spec/C-Spec Committee · Rule change · TB 25-05 (2025-05 Fastrack)

In B-Spec Spec Lines, correct model years as follows:
"Hyundai Accent Hatchback (12-19 7)"
"Kia Rio Hatchback (12-19 5)"

2025-05-01 T1 DCT Transmission in E46

#37964 from Matt Spicuzzi · Rule change · TB 25-05 (2025-05 Fastrack)

In T1 Spec Lines, BMW E46 M3, add to Chassis Notes the following:
SL# 1060: "BMW #GS7D36SG transmission permitted as an aftermarket sequential option."
SL# 1070: "BMW #GS7D36SG transmission permitted as an aftermarket sequential option."

Applies to BMW M3 on this page: Ian Barberi

2025-05-01 B-Spec 07-08 Honda Fit MT Requests

#37974 from Caleb Patrie · Rule change · TB 25-05 (2025-05 Fastrack)

In B-SPEC Spec Lines, Honda Fit MT (07-08), change as follows:
Minimum weight: "2400 2450"
Notes: "OEM exhaust manifold required. Primary catalyst may be removed."

2025-05-01 B-Spec Add B14 Kit Part # to Honda Fit (07-08) Spec line

#38010 from B-Spec/C-Spec Committee · Rule change · TB 25-05 (2025-05 Fastrack)

In B-SPEC Spec Lines, Honda Fit (07-08) MT, add to Notes the following:
"Bilstein B14 kit 4717 → 2401 verified compatible."
In B-SPEC Spec Lines, Honda Fit (07-08) AT, add to Notes the following:
"Bilstein B14 kit 4717 → 2401 verified compatible."

2025-05-01 T4 Correct Ring and Pinion Ratio to T3, Sorry I Mean T4 3.7 V6 Stang

#38041 from David Mead · Rule change · TB 25-05 (2025-05 Fastrack)

In T4 Spec Lines, Ford Mustang V6 (05-14), add to Notes the following:
"GT 8.8 rear axle assembly allowed. 3.45 or 3.55 final drive ratio allowed. 7.5 rear axle assembly with 3.45:1 final drive allowed."

2025-05-01 T4 T4 Mustang

#38058 from Scotty B White · Rule change · TB 25-05 (2025-05 Fastrack)

In T4 Spec Lines, Ford Mustang V6 (05-14), add to Notes as follows:
"OEM style rear deck spoiler similar to Laguna/CS packages permitted.”

2025-05-01 T1 Reduce E92 M3 Minimum Weight to 3050

#38092 from Shane Brown · Rule change · TB 25-05 (2025-05 Fastrack)

In T1 Spec Lines, BMW M3 E92 (08-13), Spec Line 1100, change Min. Weight as follows:
"3350 3300"

2025-05-01 T1 Finalize Spec Line for T1 Darkhorse

#38106 from Touring Committee · Rule change · TB 25-05 (2025-05 Fastrack)

In T1 Spec Lines, Mustang Darkhorse R (Mustang Challenge) Spec Line- 4119, change as follows:
Tire size: "305 315 (f) 315(r)"
Performance Control: "TBD"
Min. Weight with driver (LBS): "10.5 (f) 11 (r) 3600"
Chassis Notes: "Must conform to Mustang Challenge Rules. Tires conforming to Mustang Challenge rules are permitted. **This
car is not eligible for the Runoffs until it has competed in 3 Super Tour events.**"

2025-06-01 B-Spec Add Sedan spec lines for Hyundai & Kia

#37537 from B-Spec/C-Spec Committee · Rule change · TB 25-06 (2025-06 Fastrack)

In B-SPEC Spec Lines, classify Hyundai Accent Sedan (12-17) as follows:
B-SPEC Bore x
Stroke(mm)
Displacement
(cc)
Gear Ratios Final

A specification table follows in the original; it is not shown here.

2025-06-01 B-Spec Shifter Bushing Questions.

#38048 from Eric Yagel · Rule change · TB 25-06 (2025-06 Fastrack)

In B-SPEC Spec Lines, Honda Fit MT (09-14) add to Notes the following:
"Allow Acuity Shifter Base Bushing Kit 1954."

2025-06-01 T4 T4 Mustang

#38059 from Scotty B White · Rule change · TB 25-06 (2025-06 Fastrack)

In T4 Spec Lines, Ford Mustang V6 (05-14), change as follows:
Final Drive: "3.45 or 3.31"
"Weight: "3400 3300"

2025-06-01 T4 SSC tire allowance

#38216 from Benjamin Bunk · Rule change · TB 25-06 (2025-06 Fastrack)

In T4 Spec Lines, Scion FR-S Solo Spec Coupe (13-16), change Notes as follows:
"Any 200TW 225/45/17 or 215/45/17 DOT tire permitted."
In T4 Spec Lines, Subaru BRZ Solo® Spec Coupe (13-16), change Notes as follows:
"Any 200TW 225/45/17 or 215/45/17 DOT tire permitted."

Applies to Scion FR-S on this page: Tony Kiratsous

2025-06-01 B-Spec Add Weapon R Intake to Honda Fit MT (09-14) Spec Line

#38306 from B-Spec/C-Spec Committee · Rule change · TB 25-06 (2025-06 Fastrack)

In B-SPEC Spec Lines, Honda Fit AT (09-14), add to Notes the following:
"Weapon R Intake 301-166-301"

2025-06-01 B-Spec Update Rule 46

#38307 from B-Spec/C-Spec Committee · Rule change · TB 25-06 (2025-06 Fastrack)

In GCR, Section 9.1.10.E.46. change as follows:
"Aftermarket shift knobs are allowed and shift levers mat y be bent or extended, however the shift linkage/cables must remain
stock and may not be modified in any way. Approved aftermarket shift linkage bushings are permitted."

2025-07-01 T4 Allow B-Spec cars to run in T4

#38439 from Derrick Ambrose · Rule change · TB 25-07 (2025-07 Fastrack)

In GCR, Section 9.1.9.2, Touring car eligibility, change as follows:
"Touring car eligibility: Cars are eligible for the class they are listed with a specification line and with the specific allowances
permitted. In addition T2-T4 cars may race one class up in touring classes above their specification line class as long as they are a
legal T2-T4 car and conform to their specification line allowances as classified. Cars conforming to B-Spec or C-Spec rules are
permitted to compete in Touring 4."

2025-08-01 B-Spec Disabling 2 Pedal Shutdown

#38354 from Eric Yagel · Rule change · TB 25-08 (2025-08 Fastrack)

In B-Spec Spec Lines, Honda Fit MT (09-14), add to Notes the following:
"Two pedal shutdown may be disabled by cutting/de-pinning pin 42 (BKSW) at the main ECU connector in the engine bay."

2025-08-01 T4 Incorrect Touring Heading

#38451 from Terry Hanushek · Rule change · TB 25-08 (2025-08 Fastrack)

In T2-T4 Spec Lines, change Table Header as follows:
"T2 ET"

2025-08-01 B-Spec Update Honda Fit MT (07-08) Intake Allowance

#38530 from B-Spec/C-Spec Committee · Rule change · TB 25-08 (2025-08 Fastrack)

In B-Spec Spec Lines, Honda Fit MT (07-08), change Notes as follows:
"Bilstein B14 kit 47172401 verified compatible. Allow rear sway bar Progress #62.1060. Any Cold Air Intake Package allowed (any
manufacturer). Allow Injen Intake SP1511. This configuration is not currently eligible for Runoffs competition. This car must
compete in three (3) separate Super Tour weekends so that performance data can be collected. In addition to SCCA data box,
OBDII data collected via an AIM or similar device must be submitted. OEM exhaust manifold required. Primary catalyst may be
removed."

2025-09-01 B-Spec Remove Asterisk from Rule 9

#38768 from B-Spec/C-Spec Committee · Rule change · TB 25-09 (2025-09 Fastrack)

In GCR, Section 9.1.10.D.9, change as follows:
"* If car is used on public roads, these items should be replaced, reactivated, rearmed, etc. when not in competition."

2025-11-01 B-Spec Alternate Shift Cable Bushings and Rear Spring Seats

#38472 from Caleb Patrie · Rule change · TB 25-09 (2025-09 Fastrack)

In B-Spec Spec Lines, Honda Fit MT (07-08), add to Notes the following:
"(Effective 11/1/2025) Allow Torque Solution Shifter Cable Bushing kit TS-SCB-506."

2025-11-01 B-Spec Fiesta BOP Adjustment

#38847 from B-Spec/C-Spec Committee · Rule change · TB 25-09 (2025-09 Fastrack)

In B-Spec Spec Lines, Ford Fiesta Hatchback (11-19), change as follows:
Weight (lbs): "(Effective 11/1/2025) 2470 2525"
Restrictor (mm) & Type: "(Effective 11/1/2025)39 FPR 40 FPR"
In B-Spec Spec Lines, Ford Fiesta Sedan (11-19), change as follows:
Weight (lbs): "(Effective 11/1/2025) 2470 2525"
Restrictor (mm) & Type: "(Effective 11/1/2025)38 FPR 39 FPR"

2025-11-01 T4 02-06 Mini Cooper Gear Ratios

#38966 from Trenton Kramer · Rule change · TB 25-11 (2025-11 Fastrack)

In T4 Spec Lines, Mini Cooper S R53 (02-06), change Gear Ratios as follows:
"12.79, 7.79, 5.65, 4.62, 3.83, 3.13 or overall- 11.42, 7.18, 5.39, 4.40, 3.65, 2.96"

2025-11-01 T4 Reinstatement of the 2005-2010 Cobalt into T4

#38987 from Tim Little · Rule change · TB 25-11 (2025-11 Fastrack)

In T4 Spec Lines, classify Chevrolet Cobalt SS, Sport Coupe (06-10) as follows:

A specification table follows in the original; it is not shown here.

2025-11-01 B-Spec Request to Remove Rear Shock From Spec Line Hyundai Accents/Kia

#39017 from Alex Ratcliffe · Rule change · TB 25-11 (2025-11 Fastrack)

In B-Spec Spec Lines, Hyundai Accent Sedan (12-17), change Notes as follows:
"Bilstein B8 shock 33- 187112 approved for use in rear suspension."
In B-Spec Spec Lines, Kia Rio Sedan (12-17), change Notes as follows:
"Bilstein B8 shock 33- 187112 approved for use in rear suspension."

2025-11-01 B-Spec Update Honda Fit MT (07-08) Runoffs Eligibility

#39060 from B-Spec/C-Spec Committee · Rule change · TB 25-11 (2025-11 Fastrack)

In B-Spec Spec Lines, Honda Fit MT (07-08), change Notes as follows:
"Bilstein B14 kit 47172401 verified compatible. Allow rear sway bar Progress #62.1060. Allow Injen Intake SP1511 OEM exhaust
manifold required. Primary catalyst may be removed. This configuration is not currently eligible for Runoffs competition. This car
must compete in three (3) separate Super Tour weekends so that performance data can be collected. In addition to SCCA data
box, OBDII data collected via an AIM or similar device must be submitted. (Effective 11/1/2025) Allow Torque Solution Shifter
Cable Bushing kit TS-SCB-506."

2025-11-01 T4 Request to Classify Mercedes C230K

#39080 from Patrick Morgan · Rule change · TB 25-11 (2025-11 Fastrack)

In T4 Spec Lines, classify Mercedes C230 Kompressor (2002-2005) as follows:

A specification table follows in the original; it is not shown here.

2025-11-01 T4 ND Gearset Request for T4

#39166 from Josh Smith · Rule change · TB 25-11 (2025-11 Fastrack)

In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-24), add to Notes the following:
"Gear kit Kit PT#- 0000-02-6100."
In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), add to Notes the following:
"Gear kit Kit PT#- 0000-02-6100."
In T3 Spec Lines, Mazda MX-5 Miata (16-18), add to Notes the following:
"Gear kit Kit PT#- 0000-02-6100."
In T3 Spec Lines, Mazda MX-5 Global Cup Miata (2016-2021) ND1, ND, add to Notes the following:
"Gear kit Kit PT#- 0000-02-6100."

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2025-11-01 T4 E&O wheel size on ND

#39168 from Josh Smith · Rule change · TB 25-11 (2025-11 Fastrack)

In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), change Wheel Size (in.) as follows:
"17 x 7.5"

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2025-11-01 T4 ND Spec Lines Wrong PT#'s

#39170 from Josh Smith · Rule change · TB 25-11 (2025-11 Fastrack)

In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-24), change Notes as follows:
"Factory bolt-in roll bar/ cross member may be removed to facilitate roll cage installation. The following item(s) must remain
stock: transmission differential unless specified below. Retractable hardtop option permitted but must be disabled from moving
action and positively fastened. Any OEM or aftermarket hardtop is permitted that retains the OEM roof silhouette, including
Mazda hardtop part #0000-07-5902-ND and part #0000-07-5901 (discontinued DG Motorsports). 29mm (f) 16mm (r) sway bars
allowed. 3rd and 4th gear may be replaced with the following parts- (0000-02-5803-02, 0000-02-5803-01, 0000-02-5804-02,
0000-02-5804-01). Suspension package permitted with a 100 lbs. weight increase that includes the following parts: front springs
#0000-04-9700-08, springs up to 500lb front and 300lb rear allowed. Mazda tower brace 0000-04-5626 allowed. Mazda header

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2025-11-01 T4 Touring 4 Post-Runoffs BOP Adjustments and Changes

#39251 from Touring Committee · Rule change · TB 25-11 (2025-11 Fastrack)

In T4 Spec Lines, Acura RSX/ RSX Type-S (02-06), change Restrictor as follows:
"55mm FPR"
In T4 Spec Lines, Acura TSX (2004-2008), change Restrictor as follows:
"47mm FPR 52mm FPR"
In T4 Spec Lines, BMW Z4 2.5L (03-05) , change Weight as follows:
"3050 2950"
In T4 Spec, BMW 320i (14-15), remove this spec line in its entirety.
In T4 Spec Lines, BMW 323 (98-00), change as follows:

Applies to Mazda MX-5 on this page: Oscar Jackson

2025-12-01 T4 Classing 1995-99 Dodge Neon SOHC

#39285 from Preston Obremski · Rule change · TB 25-12 (2025-12 Fastrack)

In T4 Spec Lines, classify Dodge/Plymouth Neon ACR SOHC/DOHC (2/4 door) (95-99) as follows:

A specification table follows in the original; it is not shown here.

2025-12-01 T1 Keep S2000 Classification

#39344 from David Mead · Rule change · TB 25-12 (2025-12 Fastrack)

In T1 Spec Lines, Honda S2000, change as follows:

2025-12-01 T1 Correcting and updating T1 GT4 spec lines

#39394 from Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

In T1-GT4 Spec Lines, change as follows:

A specification table follows in the original; it is not shown here.

2025-12-01 T1 BOP adjustments to non GT4 T1 cars

#39406 from Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

In T1 Spec Lines, change as follows:
Spec Line # 1134
Required Restrictor: "61mm 70mm - Flat Plate"
Spec Line # 1140
Required Restrictor: "72mm - Flat Plate"
Spec Line # "1175"
Maximum Displ.: "L76 5967cc OEM"
Minimum Weight: "3250"

2025-12-01 T1 Remove T1 Spec Line

#39407 from Touring Committee · Rule change · TB 25-12 (2025-12 Fastrack)

In T1 Spec Lines, BMW M3 E92 (08-13) Spec Line number 1090, delete Spec Line in its entirety.

2026-01-01 B-Spec Notes section cleanup

#39062 from B-Spec/C-Spec Committee · Rule change · TB 26-01 (2026-01 Fastrack)

In B-Spec Spec Lines, Chevrolet Sonic Sedan MT (12-19), change Notes as follows:
"GM suspension kit #23123679 permitted. Bilstein B14 kit #47-171725 verifed compatible. Allow rear sway bar ZZ Performance
#ZZ-SNCRSB. Allow Aluminum Radiator #ZZP-ZZ013. Allow Babyface Fabrication brake caliper piston SNC-SS. Approved parts: ZZ
Performance rear sway bar ZZ-SNCRSB, ZZ Performance radiator ZZP-ZZ013, Babyface Fabrication brake caliper piston SNC-SS.
Bilstein B14 kit 47-171725 verified compatible."
In B-Spec Spec Lines, Chevrolet Sonic Sedan AT (12-19), change Notes as follows:
"GM suspension kit #23123679 permitted. Bilstein B14 kit #47-171725 verifed compatible. Allow rear sway bar ZZ Performance
#ZZ-SNCRSB. For automatic allow Setrab 1-series Part No. FP119M221. Allow Aluminum Radiator #ZZP-ZZ013. Allow Babyface

Applies to Mini Cooper on this page: Trenton Kramer, Thomas Lepper

Applies to Toyota Yaris on this page: Joseph Gersch

2026-01-01 T4 Alternate Placement of Fuse Panel and Electronics Request

#39370 from Aaron Stehly · Rule change · TB 26-01 (2026-01 Fastrack)

In GCR, Section 9.1.9.2.D.9.d, add the following:
"8. Under-dash electronics including computers, modules and fuse boxes may be relocated so they can be easily accessed after
roll cage installation."

2026-01-01 B-Spec 2026 BOP Recommendations

#39475 from B-Spec/C-Spec Committee · Rule change · TB 26-01 (2026-01 Fastrack)

In B-Spec Spec Lines, change as follows:
Chevrolet Sonic Sedan AT (12-19):
Restrictor (mm) & Type: "35 FPR"
Chevrolet Sonic Hatchback AT (12-19):
Restrictor (mm) & Type: "35 FPR"
Honda Fit MT (09-14):
Weight (lbs): "2525 2550"
Honda Fit CVT (15-19):

2026-01-01 T4 Clarify T4 Brake Rotor Allowance

#39503 from David Mead · Rule change · TB 26-01 (2026-01 Fastrack)

In GCR, Section 9.1.9.2.D.6.a.6., change as follows:
"In T2-Performance alternative rotors, including 2 piece rotors are permitted. Rotors must be within 5% of OE diameter or a
maximum diameter of 360mm.
In T3- Performance alternative rotors, including 2 piece rotors are permitted with a maximum diameter of 360mm.
T4- Performance alternative 1-piece rotors are permitted but rotors must meet the sizes listed in the spec line. Spec lines
showing alternate brake kits are also permitted to use 1-piece performance alternative rotors of the same size."

2026-01-01 T1 additional T1 adjustment

#39520 from Touring Committee · Rule change · TB 26-01 (2026-01 Fastrack)

In T1 Spec Line, Spec line # 1132, change Restrictor as follows:
"70mm - Flat Plate"

2026-01-01 B-Spec Expire NLA Mazda 2 Headers

#39582 from B-Spec/C-Spec Committee · Rule change · TB 26-01 (2026-01 Fastrack)

In B-Spec Spec Lines, Mazda2 (10-14), change Notes as follows:
"Exhaust Header (cat delete) HB.EM 60-404-S-SS, HP-MZD001, allowed with a 50lb adder or Mazda Motorsports PN 0000-06-
2410 with no weight adder permitted.”

2026-02-01 T4 T4 and T3 Feedback

#39230 from Tim Myers · Rule change · TB 26-02 (2026-02 Fastrack)

In T4 Spec Lines, remove Ford Mustang V6 (05-14) in its entirety.

2026-02-01 T4 T4 Mustang 4.0

#39489 from Scotty B White · Rule change · TB 26-02 (2026-02 Fastrack)

In T4 Spec Lines, Ford Mustang V6 (05-10), change as follows:
Tire: "245 255"
Notes: "ABS (option code 552) allowed. FR3 Handling Pack #M-2007-FR3V6 allowed (kit does not need to be run in its entirety).
The kit includes: Dampers M-18000-A, Lowering Springs M-5300-N, Sway Bars M- 5490-C, Strut Tower Brace M-20201-F. Ford
Positraction LSD part #M-4204-C75 is allowed. Any springs max F: 500 and R: 400 permitted. Any sway bar up to F: 35mm and R:
28mm permitted. Aftermarket Shocks conforming to T4 rules allowed. Panhard bar, part # BAR-M-4264-A permitted, or any pan
hard bar permitted must be set at same length as a stock bar, center mounting hole to center mounting hole +/- 0.25 inch. An
alternative steel drive shaft is permitted; this drive shaft is otherwise unrestricted, but no modifications to other components

2026-02-01 T4 Allow Alt Bushing Material in Toe Links

#39607 from David Mead · Rule change · TB 26-02 (2026-02 Fastrack)

In GCR, Section 9.1.9.D.5.a.1., change as follows:
"T2-T4: A maximum of 3.5 degrees of negative camber is allowed on front and rear suspensions. Spec line part(s) may not be
modified to increase caster and camber. Strut suspensions may adjust camber and caster by the use of eccentric bushings,
eccentric bolts (crash bolts) at the strut-to-spindle, and/or by use of slotted adjustment plates at the top of the strut mounting
plate. If upper strut slotted adjustment plates are used, they shall be located on existing chassis structure, utilizing the
unmodified manufacturer’s original bolt holes and may not serve as reinforcement for that structure. Slotted adjustment plates
(strut camber plates) may incorporate a single spherical bearing (spherical bushing) and a ball thrust bearing per strut tower. On
other forms of suspension, camber and caster adjustment may be achieved by the use of shims and/or eccentric

2026-02-01 B-Spec C-Spec Rear Sway Bars

#39652 from B-Spec/C-Spec Committee · Rule change · TB 26-02 (2026-02 Fastrack)

In C-Spec Spec Lines, change Notes as follows:
Chevrolet Cruze (2010-16):
"Allow BC Racing Q-06-BR suspension kit or RedShift Q-06-CSPEC. Allow Babyface Fabrication brake caliper piston SNC-
SS. Approved parts: BC Racing Q-06-BR or RedShift Q-06-CSPEC suspension kit, Babyface Fabrication brake caliper piston SNC-
SS, ZZ Performance ZZ-SNCRSB or Whiteline BHR93 rear sway bar.
Dodge Dart (2014-16):
"Allow BC Racing or RedShift Z-06-CSPEC kit. Approved parts: BC Racing Z-06-BR or RedShift Z-06-CSPEC kit, Progress rear sway
bar 62.0606."

2026-02-01 T1 LS1 into Corvette C6 Spec Line Request

#39716 from Danny Kellermeyerhttps://crbscca.com/secu · Rule change · TB 26-02 (2026-02 Fastrack)

In T1 Spec Lines, reinstate Spec Line # 1139, Chevrolet Corvette C6 (05-13) Includes Z51, GrandSport, Z06, Z06 Carbon, as
follows:
Max Displ: "LS1, LS6 OEM"
Min Weight: "3200"
Required Restrictor: "70mm"