HP + T4 + B-Spec + FC at Buttonwillow Raceway Park

2023-03-01 B-Spec Early Model Mini

#33363 from John Phillips · Rule change · TB 23-03 (2023-03 Fastrack)

In BSPEC Spec Lines, Mini Cooper (R56) MT (07-10), change Notes as follows:
“40 1mm FPR required with OE catalyst”
“OBX header part #10-2101-2S permitted with 40mm FPR.”
In BSPEC Spec Lines, Mini Cooper (R56) AT (07-10), change Notes as follows:
“40 1mm FPR required with OE catalyst”
“OBX header part #10-2101-2S permitted with 40mm FPR.”
In BSPEC Spec Lines, Mini Cooper Clubman (R55) (07 - 10), change Notes as follows:
“40 1mm FPR required with OE catalyst”

2023-03-01 T4 BMW 320I intercooler

#33762 from Chi Ho · Rule change · TB 23-03 (2023-03 Fastrack)

In T3 Spec Lines, BMW- 320I, add to Notes the following:
"Aftermarket intercooler permitted."

2023-03-01 B-Spec Helper Versus Tender springs.

#33866 from Frank Schwartz · Rule change · TB 23-03 (2023-03 Fastrack)

In B-Spec Category Specifications, GCR Section 9.1.10.E.36., change as follows:
"Suspension: competitors may use the OEM suspension, the specific suspension kit approved on the spec line or any B14 Bilstein
shock or strut with no modifications except as required for mounting or to achieve allowed camber. Any camber plate may be
used, but may not alter caster. Caster shall be within factory specification. Any part required to adapt the B14’s to the car must
be submitted for approval by the CRB and added to the individual spec line. Any spring, including ‘helper’ or ‘tender’ springs, up
to a maximum spring rate of 500 pounds may be used. Helper springs made of thin flat wire that are designed to take up the gap
between the main spring and shock/strut at full travel are allowed. Tender springs are not allowed. Spring are allowed to be
strapped or zip tied to the body. The purpose of the strap should be to keep the spring in place when the axle goes into rebound.

2023-04-01 T4 Request to Classify 2004-2008 Acura TSX in T4

#33590 from William Phee · Rule change · TB 23-04 (2023-04 Fastrack)

In T4 Spec lines, classify Acura TSX (2004-2008) as follows:

A specification table follows in the original; it is not shown here.

2023-04-01 T4 T4 Mustang Brakes/Swaybar

#34036 from Scotty B White · Rule change · TB 23-04 (2023-04 Fastrack)

In T4 Spec Lines, Ford Mustang (2005-2010), change Notes as follows:
"Any sway bar up to F: 35mm and R: 22mm 28mm permitted."

2023-05-01 B-Spec T5 Rules Feedback

#33595 from Morgan Trotter · Rule change · TB 23-05 (2023-05 Fastrack)

In B-Spec, GCR Section 9.1.10.B, add as follows:
“9.1.10. B-SPEC and C-SPEC CATEGORY CATEGORIES
B-Spec (B-Spec)
C-Spec (C-Spec)
9.1.10 continues in the B-SPEC and C-SPEC Category Rules.”
In B-Spec, GCR Section 9.1.10.B-SPEC Category, change as follows:
“These specifications are presented as an adjunct to the Manufacturer’s Service Manual. They are not meant to supersede the
information that is in the manual that legitimately applies to the make, model, and year of car with the exception of the

2023-06-01 B-Spec T5 Mazda 3 Spec Line Addition

#33536 from Morgan Trotter · Rule change · TB 23-06 (2023-06 Fastrack)

In C-Spec Spec Lines, classify Mazda 3i Touring 2.0 Skyactive MT (12-13) as follows:

A specification table follows in the original; it is not shown here.

2023-06-01 B-Spec T5 Ride Height Rules.

#33552 from Michael Ogren · Rule change · TB 23-06 (2023-06 Fastrack)

In B-Spec and C-Spec Categories Specifications, GCR Section 9.1.10.E.15., add the following:
"Ride height: For B-Spec Minimum ride height is six (6) inches, for C-Spec Minimum ride height is five and a half (5½) inches,"

2023-06-01 B-Spec T5 Spring Allowance

#33557 from Mike Ogren · Rule change · TB 23-06 (2023-06 Fastrack)

In B-Spec and C-Spec Categories Specifications, GCR Section 9.1.10.E.36., add the following:
"Suspension: B-SPEC competitors may use the OEM suspension, the specific suspension kit approved on the spec line or any B14
Bilstein shock or strut with no modifications except as required for mounting or to achieve allowed camber. C-Spec competitors
may use the OEM Suspension, the specific suspension kit approved on the spec line or TBD. Any camber plate may be used, but
may not alter caster. Caster shall be within factory specification. Any part required to adapt the B14’s to the car must be
submitted for approval by the CRB and added to the individual spec line. Any spring, including ‘helper’ or ‘tender’ springs, up to
a maximum spring rate of 500 pounds may be used. for B-Spec the maximum spring rate is 500# front and rear, for C-Spec the
maximum spring rate is 600 pounds front and 800 pounds rear. Spring are allowed to be strapped or zip tied to the body. The

2023-06-01 B-Spec T5 Wheel Minimum Weight

#33558 from Mike Ogren · Rule change · TB 23-06 (2023-06 Fastrack)

In B-Spec and C-Spec Categories Specifications, GCR Section 9.1.10.E.8., add the following:
"Wheels: For B-Spec Required wheel/rim diameter is fifteen inches (15”). Maximum wheel/rim width is seven inches (7”).
Minimum Wheel/rim weight shall be 13 lbs. For C-Spec Required wheel/rim diameter is seventeen inches (17”). Maximum
wheel/rim width is eight inches (8”). Minimum Wheel/rim weight shall be 17 lbs.."

2023-06-01 B-Spec T5 Tire Options

#33641 from Frank Schwartz · Rule change · TB 23-06 (2023-05 Fastrack)

In B-Spec and C-Spec Categories Specifications, GCR Section 9.1.10.E.7.a., add the following:
"For B-Spec: Tires shall be Hankook 205/50R15 C51 or Hankook 200/580R15 Z217. No mixing of wet and dry
tires on the same car. For C-Spec: Tires shall be 225/45R17. DOT Tires must be run unmodified.

2023-06-01 B-Spec Allow ZZP Sonic Aluminum Radiator 1.68

#33660 from Brandon Vivian · Rule change · TB 23-06 (2023-05 Fastrack)

In B-Spec Spec Lines, Chevrolet Sonic 4dr Sedan MT (12-19), add to Notes as follows:
"Allow Aluminum Radiator #ZZP-ZZ013."
In B-Spec Spec Lines, Chevrolet Sonic 4dr Sedan AT (12-19), change as follows:
Car: "Chevrolet Sonic 4dr SedanHatch AT (12-19)"
Notes:"Allow Aluminum Radiator #ZZP-ZZ013."
In B-Spec Spec Lines, Chevrolet Sonic 4dr Hatch MT (12-19) , add to Notes as follows:
"6T40e automatic equipped only. 33 34mm flat plate restrictor required. GM suspension kit #23123679 permitted. Allow rear
sway bar ZZ Performance #ZZ-SNCRSB. Allow Aluminum Radiator #ZZP-ZZ013."

2023-06-01 B-Spec Fasteners for Bumper Caps

#33797 from Kent Carter · Rule change · TB 23-06 (2023-05 Fastrack)

In B-Spec and C-Spec Categories Specifications, GCR Section 9.1.10.E., add the following:
"47. Positive fasteners may be used to attach the bumper caps to the OEM bumper cap clips and may include a machine screw
and T-nut or a rivet-nut. Pointed screws such as self-drilling/tapping or sheet metal screws are prohibited."

2023-06-01 B-Spec Allow CAN Bus Connection to Data Systems

#33806 from Kent Carter · Rule change · TB 23-06 (2023-05 Fastrack)

In B-Spec and C-Spec Categories Specifications, GCR Section 9.1.10.E.29., change as follows:
"Lap Timing and Data Acquisition Devices that perform no function other than to relay lap times to the driver (Longacre Hot Lap,
Intercomp Lap Timer, etc.) are permitted, along with the required mounting hardware and connections. Stand-alone data
acquisition systems (GPS or accelerometer-based) are allowed. One connection from the OBD2 port to the stand-alone data
acquisition system is permitted. No additional sensors may be added and the data acquisition system must not tie into the
vehicle electronics in any other manner beyond this allowance. The SCCA may install a standalone data box in a
competitor’s car at any time. Refusal of the installation of the data box will result in disqualification. Analog (needle type) gauges
for oil pressure, oil temp and water temp may be added as long as they are not tied into the vehicles ECU in any way. Stand

2023-06-01 B-Spec Request Ford Fiesta weight reduction 25lbs

#33890 from Andrew Doyle · Rule change · TB 23-06 (2023-05 Fastrack)

In B-Spec Spec Lines, Ford Fiesta 5dr Hatchback (11-19), change Weight as follows:
"2495 2470"
In B-Spec Spec Lines, Ford Fiesta 4dr Sedan (11-19), change Weight as follows:
"2495 2470"

2023-06-01 T4 05-06 Mini Wheel Weight

#34112 from Mav Singh · Rule change · TB 23-06 (2023-05 Fastrack)

In T4 Spec Lines, Mini Cooper S (02-04), change as follows:
Wheel Size: "16 x 7 17 x 8"
Add to Notes: "Wheels conforming to B-spec rules are permitted."
In T4 Spec Lines, Mini Cooper S (05-06), change as follows:
Wheel Size: "16 x 7 17 x 8"
Add to Notes: "Wheels conforming to B-spec rules are permitted."
In T4 Spec Lines, Mini Cooper S (07-13), change as follows:
Wheel Size: "17 x 7 8"

2023-06-01 T4 06-09 VW Rabbit

#34153 from Cameron Conover · Rule change · TB 23-06 (2023-05 Fastrack)

In T4 Spec Lines, delete Volkswagen Rabbit 2.5 (06-07) in its entirety and change Volkswagen Rabbit 2.5 (08-09) as follows:
"Volkswagen Rabbit 2.5 (08 06-09)"
Add to Notes: "Integrated Engineering intake IEIMVB1-BK allowed with 25lb penalty."

2023-06-01 B-Spec Threaded Metal Inserts for Plastic Intake Manifolds

#34164 from Kent Carter · Rule change · TB 23-06 (2023-06 Fastrack)

In B-Spec and C-Spec Categories Specifications, GCR Section 9.1.10.E., add the following:
"48. All cars which use throttle body to intake fasteners directly into a plastic intake, are allowed to convert the intakes to
accommodate a metal threaded insert. This is done for the sole reason that repeated removal of the restrictor plate wears the
threads in the intake and eventually causes the need to replace the intake."

2023-06-01 B-Spec BoB Adjustments

#34208 from Club Racing Board · Rule change · TB 23-05 (2023-05 Fastrack)

The popularity of BSPEC has brought heightened attention to the Balance of Performance (BoP). Given the wide diversity of
eligible cars and their designs, driving ability, car preparation/tuning levels, and other variables outside of SCCA’s control, the BoP
in this class has been remarkably close. As compared to IMSA’s job of balancing cars which are all professionally prepared, driven,
and highly instrumented, the job of our advisory committees and CRB is considerably more difficult. There are most certainly
outliers and cars which are superior under certain conditions, but in the absence of BoP regulations which vary from track to track
a perfect balance every weekend is not to be expected. The BoP is set by SCCA for what is perceived to be the ultimate tune and
best driver in a given car across the entire racing season and over as many tracks as can be reasonably sampled. If a car is not
prepared, tuned, and driven to its ultimate capability we cannot expect that it will be on par with cars of other manufacture which

2023-06-01 T4 96-01 Audi a4 2.8 Spring Rate

#34217 from Michael Gordhamer · Rule change · TB 23-06 (2023-05 Fastrack)

In T4 Spec Lines, Audi A4 V-6 (96-01) / Volkswagen Passat 2.8 V6 (96-05), change as follows:
Wheel Size: "16 x 7 17 x 8"
Tire Size: "225 245"
Notes: "The following items must remain stock: shock/struts (including mounts), original wheels, and transmission differential -
unless specified below. 800lb springs allowed. Front and rear sway bars permitted 32mm max."

2023-06-01 HP Request to Classify Sonic and Fiesta in HP

#34264 from Greg Amy · Rule change · TB 23-06 (2023-05 Fastrack)

In HP, adjust model years of the "Ford Fiesta (11-16)" spec line as follows:
"Ford Fiesta (11-16 9)"
In FP, adjust model years of the "Chevrolet Sonic (12-16)" spec line as follows:
"Chevrolet Sonic (12-16 9)"

2023-06-01 FC USF2000 Van Diemen with Mazda MZR LF-DE 2.0L in FC

#34329 from Formula/Sports Racing Committee · Rule change · TB 23-06 (2023-06 Fastrack)

RM 23-07, USF2000 Van Diemen with Mazda MZR LF-DE 2.0L in FC, GCR section 9.1.1.B.1, add a new section and re-letter the
following sections accordingly:
"c. The USF2000 tube frame Van Diemen car powered by the Mazda MZR LF-DE 2 liter engine is added as a "spec line" car in
Formula Continental. Additional "spec line" cars are disfavored, and Balance of Performance (BoP) adjustments to keep "spec
line" cars competitive with cars that meet the class formula are likewise disfavored."
In FC, GCR section 9.1.1.B.11, add the following:
"The only permitted engines are:
a. The Ford 2 liter single overhead camshaft "NE" series engine or the 1971-74 Pinto/Capri 2 liter single overhead camshaft

A specification table follows in the original; it is not shown here.

2023-07-01 FC Review FC Runoffs Tire Marking Rule

#34274 from SCCA Staff · Rule change · TB 23-06 (2023-05 Fastrack)

In FC, GCR section 9.1.1.B.10.h, change as follows:
"FC shall be is permitted a maximum of four (4) dry tires and four (4) wet tires for all Regional, Major, and Super Tour events;
eight (8) dry tires and eight (8) wet tires are permitted for the Runoffs. This rule shall be is effective beginning with the first (1st)
qualifying session of the event. Marked tires are not required for testing or practice. It is the competitor's responsibility to
ensure that the tires are declared, marked, and logged by Tech in advance of the tire(s) being used in a qualifying session or
race. Failure to participate on marked tires will result in a penalty.
1. Use of an undeclared tire shall automatically result in all times being disallowed in that session or finishing position in that
race.

2023-07-01 HP ITC to FP?

#34286 from David Snow · Rule change · TB 23-06 (2023-07 Fastrack)

In HP Spec Lines, Volkswagen Rabbit Cabriolet 1780, delete in its entirely:
In HP, Spec Lines, Volkswagen Rabbit, change Title as follows:
“Volkswagen Rabbit 1588 (includes Cabriolet / convertible)”
“Volkswagen Rabbit 1715 (81-84) (excl. conv.)”
“Volkswagen Rabbit GTI 1780 (83-84)”

2023-07-01 B-Spec Hyundai Accent Restrictor Plate

#34331 from Jose Fabian · Rule change · TB 23-06 (2023-07 Fastrack)

In B-Spec Spec Lines, Hyundai Accent GS Hatchback (13-19), change Notes as follows:
"39 41mm"

2023-07-01 B-Spec Hyundai Accent 2012 Model

#34332 from Jose Fabian · Rule change · TB 23-06 (2023-07 Fastrack)

In B-Spec Spec Lines, Hyundai Accent GS Hatchback (13-19), change model as follows:
"Hyundai Accent GS Hatchback (13 12 -19)"

2023-07-01 T4 2002-2006 Mini Cooper S R53 Spec Line Request

#34336 from Aaron Fitzsimmons · Rule change · TB 23-06 (2023-07 Fastrack)

In T4 Spec Lines, Mini Cooper S (02-04), change Weight as follows:
"2750 2700"
In T4 Spec Lines, Mini Cooper S (05-06), change Weight as follows:
"2750 2700"

2023-07-01 HP Correct Intake Valve Size on 1500cc Midget/Spitfire

#34419 from Production Committee · Rule change · TB 23-06 (2023-05 Fastrack)

In FP Spec Lines, Austin-Healey Sprite Mk. I, II,III, IV MG Midget Mk I,II, III, IV & 1500, change Intake Valve Size as follows:
"(I) 36.65.3/(1.44)"
In FP Spec Lines, Triumph Spitfire Mk. IV & 1500, change Intake Valve Size as follows:
"(I) 36.65.5/(1.440)"
In HP Spec Lines, Triumph Spitfire 1500, change Intake Valve Size as follows:
"(I) 36.65.5/(1.440)"
In HP Spec Lines, Triumph Spitfire Mk. III & IV 1500, change Intake Valve Size as follows:
"(I) 36.65.5/(1.440)"

2023-08-01 T4 Rules Clarification for Mazda RX8 Spec Line

#34395 from Colin Koehler · Rule change · TB 23-08 (2023-08 Fastrack)

In T3 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), change notes as follows:
"Use of 2009 R3 transmission is permitted with alternate gear ratios as listed. R3 transmission must be paired with the listed
alternate final drive. Front sway bar permitted 32mm MAX rear sway bar 19 MAX, Front springs max 750, 500 rear. Cold air
intake permitted. Header permitted. Aftermarket flywheel and single disc clutch permitted with no weight penalty."
In T4 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), change notes as follows:
"Mazdaspeed radiator #0000-01-8501 allowed. Use of 2009 R3 transmission is permitted with alternate gear ratios as listed. R3
transmission must be paired with the listed alternate final drive. Mazdaspeed coil spring kit #QSEA-34-01Z allowed. 60mm flat
plate restrictor required. OE Rear spoiler allowed #F151-V4-920F. OE front air dam allowed #F151-V4-900f-BB. Springs Allowed:

2023-08-01 T4 rule book corrections

#34437 from Chi Ho · Rule change · TB 23-08 (2023-08 Fastrack)

In T3 Spec Lines, BMW 320i (14-15), add to Notes the following:
"Aftermarket intercooler permitted."
In T4 Spec Lines, BMW 320i (14-15), remove from Notes the following:
"Aftermarket intercooler permitted."

2023-08-01 T4 Ride Height Correction for the T3 Solstice.

#34615 from Joe Aquilante · Rule change · TB 23-08 (2023-08 Fastrack)

In T2 Spec Lines, Pontiac Solstice GXP Coupe / Convertible (07-09), add to Notes the following:
"Minimum ride height is 3 inches."
In T3 Spec Lines, Pontiac Solstice GXP Coupe / Convertible (07-09), add to Notes the following:
"Minimum ride height is 3 inches."

2023-09-01 B-Spec Initial car classifications and spec lines

#34461 from Kent Carter · Rule change · TB 23-09 (2023-09 Fastrack)

In C-Spec Spec Lines, add Chevrolet Cruze (10-16) as follows:

A specification table follows in the original; it is not shown here.

2023-09-01 T4 Inclusion of similar car. (CLK 320)

#34626 from Patrick Morgan · Rule change · TB 23-09 (2023-09 Fastrack)

In T4 Spec Lines, Mercedes Benz CLK 320 Coupe (2004), change as follows:
"Mercedes Benz CLK 320 Coupe, C320 Sedan (2004 2000-2007)

2023-09-01 HP Larger chokes

#34681 from Brian Downey · Rule change · TB 23-09 (2023-09 Fastrack)

In HP Spec Line, Nissan/Datsun PL510, change Carburetor. No. & Type as follows:
"(1) 40 DCN, DCNF w/ 32 4mm choke(s), . or (1) 36mm DCNVH. (2) auto type side draft(s) w/ 32 4mm choke(s) on I.R. manifold @
90lbs penalty."

2023-11-01 B-Spec B-Spec Tire

#35034 from Club Racing Board · Rule change · TB 23-11 (2023-11 Fastrack)

RM 23-11 In GCR Section 9.1.10.7., change as follows:
"For the remainder of 2023, B-Spec entrants will be allowed to compete on both Hankook and Goodyear Tires. For B-Spec Tires
shall be Hankook 205/50R15 C51, or Hankook 200/580R15 Z217, P205/50ZR15 Goodyear Eagle RS (Dry tire) Catalog #D4850 or
P205/50ZR15 Goodyear Eagle RS-R (Wet tire) Catalog #D4851. For C-Spec: Tires shall be 225/45R17. No mixing of wet and dry
tires on the same car. Tires must be run unmodified. Effective 1-1-2024 Hankook Tires will be allowed at regional events only,
through 6-30-2024."

2023-12-01 B-Spec Mazda 3i 2010-2013 5-Speed Manual Gear Ratios

#34820 from Dean Fehribach · Rule change · TB 23-12 (2023-12 Fastrack)

In C-Spec Spec Lines, Mazda 3i (10-13), change Gear Rations as follows:
"3.3, 3.84?? 1.84,
1.31, 0.97,
0.75”

2023-12-01 B-Spec Error Correction

#34955 from Frank Schwartz · Rule change · TB 23-12 (2023-12 Fastrack)

In C-Spec Spec Lines, Dodge Dart (14-16), change as follows:
Year: "(1413-16)"
Bore x Stroke(mm)/ Displ. (cc): "88.0 x 97.0 82.0
2360 1998"

2023-12-01 HP Porsche 944/924S Rule Change Request

#35002 from Adam Achepohl · Rule change · TB 23-12 (2023-12 Fastrack)

In EP Spec Lines, delete the Porsche 944/924S 2.5L (2V) (83-88) spec line entirely, and create a new spec line for Porsche
944/924S 2.5L(2V) 2.7L(2V) (83-89) as follows:

A specification table follows in the original; it is not shown here.

2023-12-01 HP FP and HP Toyota Corolla

#35030 from Keith Church · Rule change · TB 23-12 (2023-12 Fastrack)

In FP Spec Lines, Toyota Corolla 2TC (71-74), change weight as follows:
"1853 1810"
In HP Spec Lines, Toyota Corolla (71-74), change weight as follows:
“1960 1910
* 2009 1958
** 2058 2006”

2023-12-01 HP Weight Reduction for Mazda 626

#35031 from David Reiter · Rule change · TB 23-12 (2023-12 Fastrack)

In HP Spec Lines, Mazda 626 (84-87), change weight as follows:
"2300 2200
*2358 2255
**2415 2310"

2023-12-01 HP Triumph GT6 Adjustments

#35054 from ANTHONY PARKER · Rule change · TB 23-12 (2023-12 Fastrack)

In EP Spec Lines, Triumph GT6, change weight as follows:
"1830 1800"

2023-12-01 HP Request to Adjust Weight of 1988-1991 CRX/Civic

#35115 from Enrik Benazic · Rule change · TB 23-12 (2023-09 Fastrack)

In HP Spec Lines, Honda CRX 1.5 (88-91), change weight as follows:
"2245 2175
*2301 2229
**2357 2284"

2024-01-01 T4 Mazda MX-5 ND1 Spec Line Request

#34232 from Josh Smith · Rule change · TB 24-01 (2024-01 Fastrack)

In T4 Spec Lines, Mazda MX-5 Miata/Club/ RF (16-18), change as follows:
Weight: "2650 2700"
Notes: "Factory bolt-in roll bar/ cross member may be removed to facilitate roll cage installation. The following item(s) must
remain stock: transmission differential unless specified below. Retractable hardtop option permitted but must be disabled from
moving action and positively fastened. Any OEM or aftermarket hardtop is permitted that retains the OEM roof silhouette,
including Mazda hardtop part #0000-07-5902-ND and part #0000-07-5901 (discontinued DG Motorsports). 29mm (f) 16mm (r)
sway bars allowed. Suspension package permitted with a 100 lbs. weight increase that includes the following parts: front springs
#0000-04-9700-08, rear springs #0000-04-9400-07, helper springs #0000-04-HLPR-EB (optional). Up to 500lb front and 300lb rear

2024-01-01 FC Please correct omitted punctuation

#34890 from Club Racing Board · Rule change · TB 23-10 (2023-09 Fastrack)

In Cars and Equipment, GCR section 9.3.33.B.2, add the following:
"(Effective 1/1/2024) A red taillight meeting FIA Standard 8874-2019, Technical List No. 76, is required on all Formula (open
wheel) and Sports Racing cars."
In Appendix F. Technical Glossary, Minimum Weight, change as follows:
"Minimum Weight: – Weight specified with driver, exactly as they come off the race circuit, at the conclusion of any race or
qualifying session."
In FA Table 1, Spec Line E notes, add the following:
"Any BD series iron or alloy cylinder block and alternate crankshaft permitted."

2024-01-01 T4 BRZ/FRS/86 Spring Allowance

#35038 from Luis Goncalves · Rule change · TB 24-01 (2024-01 Fastrack)

In T4 Spec Lines, Scion FR-S/10 series (13-16), change Notes as follows:
"Eibach 82105.320, 4.10582 and SPC 67660 allowed. Eibach 82105.320 sway bar kit allowed. Eibach 4.10582 springs or 225 lb (f)
and 300 lb (r) springs allowed. SPC 67660 allowed. Front strut tower brace allowed. Raceseng, part # raceseng-ft86-r-shock-top
permitted. Non-OEM limited slip differential allowed with +50 lbs. weight penalty. 55mm flat plate restrictor required. Only 17”
wheels permitted."
In T4 Spec Lines, Subaru BRZ/ BRZ Limited (13-16), change Notes as follows:
"Eibach 82105.320, 4.10582 and SPC 67660 allowed. Eibach 82105.320 sway bar kit allowed. Eibach 4.10582 springs or 225 lb (f)
and 300 lb (r) springs allowed. SPC 67660 allowed. Front strut tower brace allowed. Raceseng, part # raceseng-ft86-r-shock-top

2024-01-01 B-Spec B-Spec Hankook Tire for Regionals

#35055 from SCCA Staff · Rule change · TB 24-01 (2024-01 Fastrack)

In GCR, Section 9.1.10.E.7., change as follows:
"a. For the remainder of 2023, B-Spec entrants will be allowed to compete on both Hankook and Goodyear Tires. For B-Spec
Tires shall be Hankook 205/50R15 C51, Hankook 200/580R15 Z217, P205/50ZR15 Goodyear Eagle RS (Dry tire) Catalog #D4850
or P205/50ZR15 Goodyear Eagle RS-R (Wet tire) Catalog #D4851. Effective 1-1-2024 Hankook Tires will be allowed at regional
events only, through 6-30-2024. Effective 7-1-2024 Goodyear is the only legal specified tire allowed in B-spec for all events.
For C-Spec: Tires shall be 225/45R17. No mixing of wet and dry tires on the same car. Tires must be run unmodified. Effective 1-
1-2024 Hankook Tires will be allowed at regional events only, through 6-30-2024.
b. When using the Hankook wet tire, all cars get a 0.2” lower ride height allowance due to smaller radius of the wet tire."

2024-01-01 HP Request to Review Z3 2.5 Spec Line

#35073 from Tim Schreyer · Rule change · TB 24-01 (2024-01 Fastrack)

In EP spec line, BMW Z3 2.5L, change weight as follows:
"2450 2500
*2511 2563
**2573 2625"

2024-01-01 B-Spec Update 12-19 Nissan Versa Spec Line & Adjust BOP

#35074 from Matt Wolfe · Rule change · TB 24-01 (2024-01 Fastrack)

In B-Spec Spec Lines, Nissan Versa (2012), change Model as follows:
"Nissan Versa Sedan (2012-2019)"
In B-Spec Spec Lines, Nissan Versa Note (2013), change as follows:
Model: "Nissan Versa Note Hatchback (2013-2019)"
Min Weight: "2550 2490"
In B-Spec Spec Lines, Nissan Versa (2013-), delete Spec Line in its entirety.

2024-01-01 HP Parity in HP

#35138 from Kendall Jones · Rule change · TB 24-01 (2024-01 Fastrack)

In HP Spec Line, Austin-Healey Sprite Mk I, II, III, IV / MG Midget Mk I, II, III, IV & 1500, Prep Level 1/2, change Notes section as
follows:
"Compression ratio limited to 11 12.0:1"

2024-01-01 T4 TSX Allowance

#35219 from Oscar Jackson · Rule change · TB 24-01 (2024-01 Fastrack)

In T4 Spec Lines, Acura TSX (2004-2008), add to Notes the following:
"Header allowed."

2024-01-01 HP Spitfire classification

#35224 from Michael Walz · Rule change · TB 24-01 (2024-01 Fastrack)

In HP spec line, Triumph Spitfire 1500, make the following change to the Valves column:
"(I) 36.65.5/(1.440)"

2024-01-01 T4 Requested Update of Model Years of 370Z

#35231 from Richard Kulach · Rule change · TB 24-01 (2024-01 Fastrack)

In T3 Spec Lines, Nissan 370Z (09-16) / 370Z NISMO Edition (09-13), change model as follows:
"Nissan 370Z (09-16) / 370Z NISMO Edition (09-13) ,incl. Nismo (2009-2022)"

2024-01-01 B-Spec Clarifying the ECU and Data Acquisition language

#35236 from Kent Carter · Rule change · TB 24-01 (2024-01 Fastrack)

In GCR, Section 9.1.10.E.37., change as follows:
"ECU/PCM: OEM ECU/PCMs is required. Alternate engine calibrations are allowed. The car may meet federal emission
standards, but shall provide OBD II compliant data to the data link connector. Manufacturers may provide a stability control
override procedure or module. ECU/PCM: All electronic control systems (ECU/PCM/ABS, etc) must be unaltered, model-
appropriate US domestic market OE devices unless otherwise permitted on the spec line. Alternate engine calibrations are
allowed but no changes are permitted and no device capable of altering ECU characteristics may be present in the car from the
time the car enters the grid until after impound and any stewards’ actions. OBD II compliant data correct for the car must be
present at the data link connector. Malfunction codes (‘check engine light’) may be present. Manufacturers or competitors may

2024-01-01 HP Miata Alternate Head

#35253 from Don Tucker · Rule change · TB 24-01 (2024-01 Fastrack)

In EP Spec Lines, Mazda MX-5 /Miata 1.8L (90-97), change weight as follows:
"2200 2150"
Mazda MX-5 /Miata (94-97)
"2035 2000
*2086 2050
**2137 2100"

2024-01-01 HP Triumph GT6 Adjustments

#35255 from Anthony Parker · Rule change · TB 24-01 (2024-01 Fastrack)

In EP spec line, Triumph GT6, make the following change in the Notes section:
"Two (2) 1.75” auto-type carburetors @ 1970 40 lbs. Three (3) Weber 40 DCOE on IR manifold with 28mm chokes @ 1990
lbs. Laycock overdrive, May use 5 speed gearbox w/o overdrive. Three (3) Weber 40mm DCOE w/28mm venturi on individual
runner manifold @ 2020 lb."

2024-01-01 HP Honda S2000 throttle body

#35272 from Aaron Johnson · Rule change · TB 24-01 (2024-01 Fastrack)

In EP spec line, Honda S2000, make the following changes to its spec line:
Fuel Injected Equipped Throttle Body Inside Diameter: "62 64"
Notes: "Comp. Ratio limited to 12.0:1. Valve lift limited to .500”. An adaptor plate can be used to mount the 62mm throttle body
from '00-05 to the '06-09 intake manifold. The adaptor plate can be no more than 1.25" thick, and its bore must not exceed the
"Fuel Injected Equipped Throttle Body Inside Diameter" maximum spec of 64mm."

2024-01-01 HP Front Header/Nose Panel Alternate Material For 84-87 CRX

#35301 from Darryl Saylor · Rule change · TB 24-01 (2024-01 Fastrack)

In HP Spec Lines, Honda CRX/Si (84-87), in Notes, make the following change:
"Compression ratio limited to 11.0:1, Valve lift limited to .390”. The front header/nose body panel can be replaced by a
replica which may be constructed of an alternate material provided its appearance remains stock."

2024-01-01 HP Correction within Triumph TR8 Spec Line

#35315 from Production Committee · Rule change · TB 24-01 (2024-01 Fastrack)

In EP spec line, Triumph TR8 (78-81), move the "Dry sump allowed" wording to the appropriate location as follows:
Carburetor. No. & Type: “Zenith Stromberg carbs or fuel injection. Dry sump is allowed.”
Notes: “Comp. Ratio limited to 12.0:1, Valve lift limited to .500”. Dry sump is allowed.”

2024-01-01 HP Correction to EP 924S/944 Spec Line

#35317 from Production Committee · Rule change · TB 24-01 (2024-01 Fastrack)

In EP spec line, Porsche 944/924S 2.5L (2V) / 2.7L (2V) (83-89), change Weight as follows:

A specification table follows in the original; it is not shown here.

2024-01-01 HP Review Classification of HP Mazda 2

#35318 from Production Committee · Rule change · TB 24-01 (2024-01 Fastrack)

In HP spec line, Mazda 2 (11-14), make the following weight changes:
"1920 1995
*1968 2045
**2016 2095"

2024-02-01 B-Spec Split Spec Line of Automatic and Manual 2nd Gen (09-14) Fit

#35251 from Matt Wolfe · Rule change · TB 24-02 (2024-02 Fastrack)

In B-Spec Spec Lines, classify Honda Fit AT (09-14):
"09-14 Honda Fit AT"
Gear Ratios: "2.99, 1.68, 1.07, 0.76, 0.55"
Final Drive: "4.56"
Notes: Allow damper and spring set 51600F23SA100, Damper FR LH 51605F23SA100, Damper FR RH 51606F23SA100,
Damper RR 52610F23SA100, Spring adjust asy RR 52691F23SA010. Seat upper FR spring 51688F23SA200, 51402FC4YA00
front helper spring and 51403FC4YA00 front spacer permitted. Front Damper Mount P/N 51920-F23S-A30 is allowed.
Allow rear sway bar Progress # 62.1061. Allow Setrab 50-119-7612 transmission cooler in addition to OEM. Any

2024-02-01 B-Spec Equalize Mazda 2 Headers and clean up spec line

#35259 from Matt Wolfe · Rule change · TB 24-02 (2024-02 Fastrack)

In B-Spec Spec Lines, Mazda2 (10-14), change as follows:
Weight: "Effective 3-1-2024: 2280 2350"
Notes: "Helper springs F&R 0000-04-9926, Spring spacer F&R 0000-04-9925, Front sway bar end links adjstbl 0000-04-
2202, Rear sway bar 0000-04-2203-RR or 0000-04-2312, Modified strut bearing plate 0000-04-2204, Crash bolt set 0000-
04-2205, Allow rear torque bar Corksport #Mz2-3-070. Cold air intake Corksport Mz2-6-117-31100 and air duct Mz2-6-
120-10 are allowed. Effective 3-1-2024: Exhaust Header (cat delete) HB.EM 60-404-S-SS, HP-MZD001, or Mazda
Motorsports PN 0000-06-2410 permitted. Powerflex PFR19-1511BX2 rear suspension bushings allowed. Allow Mazda
part number 0000-01-2501-CR Radiator. Allow Mazda undertray part number DO8C-56- 110A, DO8C-56-311, DO7A-56-

2024-02-01 T4 More Car Lightening Stuff

#35319 from Scotty B White · Rule change · TB 24-02 (2024-02 Fastrack)

In GCR, Section 9.1.9.2.D.1.g.3., change as follows:
"Batteries may be replaced provided the replacement is capable of starting the car. Batteries may not be relocated
unless noted on the spec line. Batteries must be adequately secured. Battery labeling must conform to 9.3.35.D. with
those of an alternate manufacturer, provided they are of similar amp-hour capacity, size and within 10% of OEM
weight."

2024-02-01 B-Spec Rear Sway Bar Request for Nissan Versa and Versa Note 2013-

#35323 from Richard Osborne · Rule change · TB 24-02 (2024-02 Fastrack)

In B-Spec Spec Lines, Nissan Versa (2013-), change as follows:
Model: "Nissan Versa (2013-2019)"
Notes: "Hardrace HR-Q0146 19mm rear sway bar permitted."
In B-Spec Spec Lines, Nissan Versa Note (2013-), change as follows:
Model: "Nissan Versa Note (2013-2019)"
Notes: "Hardrace HR-Q0146 19mm rear sway bar permitted."

2024-02-01 T4 ND Missed Items

#35352 from Touring Committee · Rule change · TB 24-02 (2024-02 Fastrack)

In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), add to Notes the following:
"3rd and 4th gear may be replaced with the following parts- (0000-02-5803-02, 0000-02-5803-01, 0000-02-5804-
02, 0000-02-5804-01)."
In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-21), add to Notes the following:
"3rd and 4th gear may be replaced with the following parts- (0000-02-5803-02, 0000-02-5803-01, 0000-02-5804-
02, 0000-02-5804-01)."

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2024-02-01 B-Spec Eliminate Redundant Trans Cooler Rule

#35353 from Matt Wolfe · Rule change · TB 24-02 (2024-01 Fastrack)

In GCR, Section 9.1.10.E.44., eliminate and renumber accordingly:
"44. Auxiliary transmission coolers may be approved on a case by case basis. Part numbers must be submitted and
added to the cars spec line."

2024-02-01 B-Spec Fix Sonic Hatchback MT Spec Line

#35371 from Jonathan Wickert · Rule change · TB 24-02 (2024-01 Fastrack)

In B-Spec Spec Line, Chevrolet Sonic 5dr Hatch MT (12-19), add to Notes the following:
"Allow Aluminum Radiator #ZZP-ZZ013."

2024-02-01 T4 Inclusion of B-C spec cars in T4

#35374 from Touring Committee · Rule change · TB 24-02 (2024-02 Fastrack)

In GCR, Section 9.1.9.2., change as follows:
"Touring car eligibility: Cars are eligible for the class they are listed with a specification line and with the specific
allowances permitted. In addition, T2-T4 cars may race one class up in touring classes above their specification line class
as long as they are a legal T2-T4 car and conform to their specification line allowances as classified. Cars conforming to
C-Spec rules are permitted to compete in Touring 4."

2024-02-01 T4 T2-T4 Set expiration dates on spec lines

#35378 from Touring Committee · Rule change · TB 24-02 (2024-02 Fastrack)

In T2-T4 Spec Lines, add **This Spec line will expire 12/31/24, Please submit to appeal**
to Notes to the following Spec Lines:
T2:
Acura TL SHAWD (10-13)
Audi S4 (12-14)
Audi S5 (13-14)
Audi TT RS (2018-)
Cadillac ATS-V (16-17)

2024-02-01 HP Update 1988-1991 Civic to Match 1988-1991 CRX

#35399 from Enrik Benazic · Rule change · TB 24-02 (2024-01 Fastrack)

In HP, make the following weight change:
Honda Civic 1.5 (88-91)
“2245 2175
*2301 2229
**2357 2284”

2024-03-01 T4 Reorganize Spec Lines

#35375 from Touring Committee · Rule change · TB 24-03 (2024-03 Fastrack)

In T2-T4 Spec Lines, change Spec Line as follows:
"Wheel- base (mm) Required Restrictor"

2024-03-01 B-Spec BOP Adjustment for Yaris iA, 2020+ Versa, and 07-08 Honda Fit

#35382 from Matt Wolfe · Rule change · TB 24-03 (2024-03 Fastrack)

In B-Spec Spec Lines, Honda Fit (07-08), change as follows:
Min weight: "2525 2400"
Notes: "Any Cold Air Intake Package allowed (any manufacturer). This configuration is not currently eligible for Runoffs
competition. This car must compete in three (3) separate Super Tour weekends so that performance data can be collected. In
addition to SCCA data box, OBDII data collected via an AIM or similar device must be submitted."
In B-Spec Spec Lines, Honda Fit (07-08) Automatic, change as follows:
Min weight: "2525 2400"
Add to Notes: "Any Cold Air Intake Package allowed (any manufacturer). This configuration is not currently eligible for Runoffs

2024-03-01 T4 Allow any 400lb rear spring in the RX8

#35433 from Raymond Blethen · Rule change · TB 24-03 (2024-03 Fastrack)

In T4 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), change Notes as follows:
"Mazda Motorsports- 0000- 04-9700-08 or Eibach- 0800.250.0700 (R) Mazda Motorsports- 0000-04-9400-07 or Eibach
0700.250.0400, and helper 0000-04-9926 allowed. Springs allowed 700lb (f), 400(r)."

2024-03-01 B-Spec 07-08 Honda Fit Rear Sway Bar part #

#35473 from B-Spec/C-Spec Committee · Rule change · TB 24-03 (2024-03 Fastrack)

In B-Spec Spec Lines, Honda Fit (07-08) Automatic, change Notes as follows:
"Allow rear sway bar Progress # 62.1061 0."
In B-Spec Spec Lines, Honda Fit (07-08), add to Notes the following:
"Allow rear sway bar Progress # 62.1060."

2024-03-01 T4 370Z Brake Rotor Size Correction

#35487 from Derek Chan · Rule change · TB 24-03 (2024-03 Fastrack)

In T2 Spec Lines, Nissan 370Z (09-17) / 370Z NISMO Edition (09-17), change Brakes (mm) as follows:
"(F)320 x 28 Vented R)320 x 16 Vented : (F) 355x32mm Vented(R) 350x20mm Vented”
In T3 Spec Lines, Nissan 370Z, incl. Nismo (2009-2022), change Brakes (mm) as follows:
"(F)320 x 28 Vented (R)320 x 16 Vented : (F) 355x32mm Vented(R) 350x20mm Vented”

2024-03-01 HP GCR Correction - Redundant HP Spec Lines

#35623 from Production Committee · Rule change · TB 24-03 (2024-03 Fastrack)

In HP Spec Lines, delete the following redundant spec lines in their entirety:
Spec line #10 - VW Rabbit Cabriolet 1780
Spec line #3 - VW Scirocco 1588
Spec line #4 - VW Scirocco 1780 (8-valve) (83-88)
Spec line #5 - VW Scirocco 1588

2024-04-01 B-Spec Change restrictor from 30mm to 31mm (2015+ Honda Fit) and add 50#

#34857 from Matt Downing · Rule change · TB 24-04 (2024-04 Fastrack)

In B-Spec Spec Lines, Honda Fit MT (15-19), change as follows:
Weight: ""2525 2550"
Notes: "30 31mm"
In B-Spec Spec Lines, Honda Fit MT (15-19), change as follows:
Weight: ""2525 2550"
Notes: "30 31mm"

2024-04-01 B-Spec Wheel Offset and Spacer Revision

#35466 from Kent Carter · Rule change · TB 24-04 (2024-04 Fastrack)

In GCR, Section 9.1.10.E.8., change as follows:
"Wheels: All wheels shall be one-piece metal castings or metal two piece welded. Wheels of any offset are permitted provided
the tire tread (the portion of the tire that contacts the ground) does not protrude beyond the fender opening when viewed from
the top perpendicular to the ground. Wheel spacers and aftermarket wheel studs/bolts are permitted. Wheel bolts may be
replaced with studs and nuts. Total offset must be the same left to right for an individual axle but may differ from front to rear.
For B-Spec Required wheel/rim diameter is fifteen inches (15”). Maximum wheel/rim width is seven inches (7”). Minimum
Wheel/rim weight shall be 13 lbs.
For C-Spec Required wheel/ rim diameter is seventeen inches (17”). Maximum wheel/rim width is eight inches (8”). Minimum

2024-04-01 FC Four Pot Calipers

#35481 from Steve Jenks · Rule change · TB 24-04 (2024-04 Fastrack)

In FC Table FC Charts, add the following:
In FC, GCR section 9.1.1.B.1.c, change as follows:
"The USF2000 tube frame Van Diemen car powered by the Mazda MZR LF-DE 2 liter engine and the F2000 Metrik ZF2 car
equipped with 4-piston calipers is are added as a "spec line" cars in Formula Continental. Additional "spec line" cars are
disfavored, and Balance of Performance (BoP) adjustments to keep "spec line" cars competitive with cars that meet the class
formula are likewise disfavored."
FC Charts
Car Engine Wheel Width

A specification table follows in the original; it is not shown here.

2024-04-01 B-Spec Set Expiration Date for Unused Spec Lines

#35742 from B-Spec/C-Spec Committee · Rule change · TB 24-04 (2024-04 Fastrack)

In B-Spec Spec Lines, Mini Cooper Countryman (R60) (11-16), add to Notes the following:
”**This Spec line will expire 1/1/2025 unless an appeal is filed on or before 12/1/2024.**”
In B-Spec Spec Lines, Mini Cooper Paceman (R61) (11-16), add to Notes the following:
”**This Spec line will expire 1/1/2025 unless an appeal is filed on or before 12/1/2024.** ”
In B-Spec Spec Lines, Nissan Versa (07-11) with 1797cc engine, add to Notes the following:
”**This Spec line will expire 1/1/2025 unless an appeal is filed on or before 12/1/2024.** ”

Applies to Mini Cooper on this page: Trenton Kramer, Thomas Lepper

2024-04-01 T4 Corrections to T4 RX8 Spec line

#35767 from Touring Committee · Rule change · TB 24-04 (2024-04 Fastrack)

In T4 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), change Notes as follows:
"Mazdaspeed radiator #0000-01-8501 allowed. Mazdaspeed coil spring kit #QSEA-34-01Z allowed. OE Rear spoiler allowed
#F151-V4-920F. OE front air dam allowed #F151-V4-900f-BB. Springs allowed 700lb (f) max, 400(r) max. Oil metering pump may
be bypassed. Alternate sway bars allowed max 32mm (f) 19mm (r)."

2024-05-01 B-Spec Delete trim levels/update language for spec lines

#35746 from B-Spec/C-Spec Committee · Rule change · TB 24-05 (2024-05 Fastrack)

In B-Spec Spec Lines, change Model description as follows:
"Chevrolet Sonic 4dr Sedan MT (12-19)"
"Chevrolet Sonic 4dr Sedan AT (12-19)"
"Chevrolet Sonic 5dr Hatch Hatchback MT (12-19)"
"Chevrolet Sonic 5dr Hatch Hatchback AT (12-19)"
"Ford Fiesta 5dr Hatchback (11-19)"
"Ford Fiesta 4dr Sedan (11-19)"
"Honda Fit MT (07-08)"

2024-05-01 T4 Allow T4 and T3 RX8 to Disable/Remove Factory Oil Inj.

#35761 from David Mead · Rule change · TB 24-05 (2024-05 Fastrack)

In T3 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), add to Notes as follows:
"OEM oil injection system may be removed or disabled."
In T4 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), add to Notes as follows:
"OEM oil injection system may be removed or disabled."

2024-05-01 T4 2023 ND2 Miata Classification and Allowances

#35837 from Coyote Black · Rule change · TB 24-05 (2024-05 Fastrack)

In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-21), change Year as follows:
"(19-21 24)"
In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-21), add to Notes as follows:
"Suspension package permitted with a 100 lbs. weight increase that includes the following parts: front springs #0000-04-9700-
08, springs up to 500lb front and 300lb rear allowed. Mazda tower brace 0000-04-5626 allowed."

2024-05-01 T4 Errors and Omissions for 06-09 VW Rabbit Rotor

#35851 from Andrew Burke · Rule change · TB 24-05 (2024-05 Fastrack)

In T4 Spec Lines, Volkswagen Rabbit 2.5 (06-09), change Brakes as follows:
"(F) 228 288 Vented Disc (R) 260 Solid Disc"

2024-05-01 HP Replace plastic panels

#35875 from Darryl Saylor · Rule change · TB 24-05 (2024-05 Fastrack)

In HP spec line "Honda CRX/Si (84-87)", make the following change to the Notes section:
"The plastic OE front header/nose body panel, lower rocker side-skirt, and lower door cap panel can be replaced by a
replica, which may be constructed of an alternate material, provided its appearance remains stock."

2024-05-01 T4 Driveshafts

#35916 from Scotty B White · Rule change · TB 24-05 (2024-05 Fastrack)

In GCR Section 9.1.9.2.D.4.b., add the following:
"6. T2-T3- Driveshafts may be replaced with alternative materials ie. carbon fiber, aluminum, steel. Two-piece driveshafts may
be replaced with one-piece units. If non-OEM driveshaft is used, add 25 lbs."

2024-05-01 T4 GCR ERROR - letter not properly applied to GCR

#35999 from Touring Committee · Rule change · TB 24-05 (2024-05 Fastrack)

In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), change Notes as follows:
"Factory bolt-in roll bar/ cross member may be removed to facilitate roll cage installation. The following item(s) must remain
stock: transmission differential unless specified below. Retractable hardtop option permitted but must be disabled from moving
action and positively fastened. Any OEM or aftermarket hardtop is permitted that retains the OEM roof silhouette, including
Mazda hardtop part #0000-07-5902-ND and part #0000-07-5901 (discontinued DG Motorsports). 29mm (f) 16mm (r) sway bars
allowed. Suspension package permitted with a 100 lbs. weight increase that includes the following parts: front springs #0000-
04-9700-08, rear springs #0000-04-9400-07, helper springs #0000-04-HLPR-EB (optional). Up to 500lb front and 300lb rear
springs allowed. Mazda Motorsports Header part #0000-06-5410 allowed. Mazda tower brace 0000-04-5626 allowed."

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2024-05-01 B-Spec Wheel Rules

#36066 from B-Spec/C-Spec Committee · Rule change · TB 24-05 (2024-05 Fastrack)

In GCR, Section 9.1.10.E.8., change as follows:
"Wheels: All wheels shall be one-piece metal castings or metal two piece welded. All four wheels must be the same dimensional
offset. Any offset is permitted so long as Wheels of any offset are permitted provided the tire tread (the that portion of the tire
that contacts the ground) does may not protrude beyond the fender opening when viewed from the top perpendicular to the
ground. Wheel spacers and aA ftermarket wheel studs/ and or wheel bolts are permitted allowed. Wheel bolts may be replaced
with studs and nuts. Wheel spacers are allowed, but must be the same thickness on all four corners.Total offset must be the
same left to right for an individual axle but may differ from front to rear.
B-Spec Required wheel/rim diameter is fifteen inches (15”). Maximum wheel/rim width is seven inches (7”). Minimum

2024-06-01 HP NIssan 300ZX Z31 to EP

#35830 from Murphy Nichols · Rule change · TB 24-06 (2024-06 Fastrack)

In EP Spec Lines, classify Nissan 300ZX (84-89), as follows:

A specification table follows in the original; it is not shown here.

2024-06-01 T4 Allow OEM Front Spoiler 06-08 Miata in T4

#35941 from David Mead · Rule change · TB 24-06 (2024-06 Fastrack)

In T4 Spec Lines, Mazda MX-5 / Club Model (06-15), add to Notes the following: "Front
spoiler permitted (NF51-V4-900F)."

Applies to Mazda MX-5 on this page: Oscar Jackson

2024-06-01 B-Spec Add B14 Kit Part # to Sonic Spec line In

#35969 from B-Spec/C-Spec Committee · Rule change · TB 24-06 (2024-06 Fastrack)

B-Spec Spec Lines, change Notes follows:
Chevrolet Sonic Sedan MT (12-19): "33mm flat plate restrictor required. GM suspension kit #2312 → 3679 permitted. Bilstein B14 kit
#47-171725 verified compatible."
Chevrolet Sonic Sedan AT (12-19): "33mm flat plate restrictor required. GM suspension kit #2312 → 3679 permitted. Bilstein B14 kit
#47-171725 verified compatible."
Chevrolet Sonic Hatchback MT (12-19): "34mm flat plate restrictor required. GM suspension kit #2312 → 3679 permitted. Bilstein
B14 kit #47-171725 verified compatible."
Chevrolet Sonic Hatchback AT (12-19): "34mm flat plate restrictor required. GM suspension kit #2312 → 3679 permitted. Bilstein

2024-06-01 B-Spec Eliminate redundant sway bar end link part #s from notes In

#35970 from B-Spec/C-Spec Committee · Rule change · TB 24-06 (2024-06 Fastrack)

B-SPEC Spec Lines, elimination from Notes the following:
Mazda2 (10-14): "Front sway bar end links adjstbl 0000-04-2202,"
Mini Cooper Hatchback (R50) MT (02 - 06): "Front adjustable sway bar links part number 31 35 6 771 is allowed. Rear adjustable
sway bar links part number 35 50 6 772 is allowed."
Mini Cooper Hatchback (R50) CVT (02 - 06): "Front adjustable sway bar links part number 31 35 6 771 is allowed. Rear adjustable
sway bar links part number 35 50 6 772 is allowed."
Mini Cooper (R56) MT (07-10): "Front adjustable sway bar links part number 31 35 6 771 is allowed. Rear adjustable sway bar
links part number 35 50 6 772 is allowed."

2024-06-01 B-Spec Update Fiat 500 Spec line In

#35990 from B-Spec/C-Spec Committee · Rule change · TB 24-06 (2024-06 Fastrack)

B-SPEC Spec Lines, Fiat 500 (12-15), change year as follows: "Fiat 500 (12-
15 7)"

2024-06-01 HP RX7 1993 and Up Request In EP Spec Lines, classify

#36031 from Edward Zabinski · Rule change · TB 24-06 (2024-06 Fastrack)

Mazda RX-7 (92-97) as follows:

A specification table follows in the original; it is not shown here.

2024-06-01 T4 T4 Mustang Weight Reduction In T4 Spec

#36051 from Scotty B White · Rule change · TB 24-06 (2024-06 Fastrack)

Lines, Ford Mustang V6 (05-10), change as follows:
Weight: "3275 3225"
Notes: "14” Brembo Brake Kit#M-2300-S permitted."

2024-06-01 T4 R53 Mini Cooper S spec line request In

#36056 from Manvinder Singh · Rule change · TB 24-06 (2024-06 Fastrack)

T4 Spec Lines, Mini Cooper S (02-04), add to Notes the following:
"Milltek exhaust manifold #SSXM459 allowed. 25mm rear sway bar allowed."
T4 Spec Lines, Mini Cooper S (05-06), add to Notes the following:
"Milltek exhaust manifold #SSXM459 allowed. 25mm rear sway bar allowed."

2024-06-01 B-Spec Update (15-19) Honda Fit

#36067 from B-Spec/C-Spec Committee · Rule change · TB 24-06 (2024-06 Fastrack)

CVT Spec Line In B-SPEC Spec Lines, Honda Fit CVT (15-19), change as
follows:
Weight: "2525 2550"
Notes: "30 31mm"

2024-06-01 HP Clean-up Multiple EP RX-8 Spec Lines In EP

#36156 from Production Committee · Rule change · TB 24-06 (2024-06 Fastrack)

Spec Lines, make the following changes to the two Mazda RX-8 spec lines.
Remove spec line entirely:
Mazda RX-8 (04-11)
Remove the wording "alternate":
Mazda RX-8 (04-11)(alternate)
Spec Mazda (SM/SMX) None.

2024-07-01 T4 Mustang T2/T3

#35877 from Scotty B White · Rule change · TB 24-07 (2024-07 Fastrack)

In T2 Spec Lines, Ford Mustang GT 5.0L (15-17), add to Notes as follows:
"Track/Performance Package parts permitted."
In T2 Spec Lines, Ford Mustang GT 5.0L (2018-), add to Notes as follows:
"Track/Performance Package parts permitted."
In T3 Spec Lines, Ford Mustang V6 (15-17), change Notes as follows:
"Track/Performance package allowed."

2024-07-01 T4 Homologation of car to T4

#36030 from Patrick E Morgan · Rule change · TB 24-07 (2024-07 Fastrack)

In T4 Spec Lines, Mercedes C300 4Matic (2008-2011), classify as follows:

A specification table follows in the original; it is not shown here.

2024-07-01 T4 T2-T4 Driveshaft Mistake...?

#36050 from Scotty B White · Rule change · TB 24-07 (2024-07 Fastrack)

In GCR Section 9.1.9.2.D.4.b.6., remove as follows:
"If non-OEM driveshaft is used, add 25 lbs."
In T2 Spec Lines, Ford Mustang V6 (11-14), change Notes as follows:
"Driveshaft from Alternate metallic driveshaft is allowed."
In T2 Spec Lines, Ford Mustang Boss 302 (12-13), change Notes as follows:
"Alternate metallic driveshaft is allowed."
In T2 Spec Lines, Ford Mustang GT 5.0L (11-14)ki, change Notes as follows:
"Alternate metallic driveshaft is allowed."

2024-07-01 B-Spec Clean up (15-19) Honda Fit MT & CVT Notes Sections

#36068 from B-Spec/C-Spec Committee · Rule change · TB 24-07 (2024-07 Fastrack)

In B-Spec Spec Lines, Honda Fit MT (15-19), change notes as follows:
"31mm flat plate restrictor required. Allow damper FR LH 51605F23SA81, Damper FR RH FR RH 51606F23SA81,
Damper RR 52610F23SA80, Spring adjust assy RR 52691F23SA80, Bushing Comp, Damper RR TBD, Camber
Adjuster Comp, Damper 51920F23SA82, Damper wrench kit 89211F23SA80, Hose Set, FR & RR Brake
01464F23SA810, Pad Set, XR2 D948 54022F27SA81, Disk, FR Brake 45250F23SA80, Air cleaner element assy
17220FC4YA80, Exhaust pipe assy 18300F23SA81, ACG belt (6PK858) 31110FC4YA80. Allow rear sway bar
Progress 62.1063."
In B-Spec Spec Lines, Honda Fit CVT (15-19), change notes as follows:

2024-07-01 B-Spec Set expiration date for Nissan Versa (09-11)

#36069 from B-Spec/C-Spec Committee · Rule change · TB 24-07 (2024-07 Fastrack)

In B-Spec Spec Lines, Nissan Versa (09-11), add to notes the following:
"**This Spec line will expire 1/1/2025 unless an appeal is filed on or before 12/1/2024.**"

2024-07-01 B-Spec Delete Redundant Rule 25

#36075 from B-Spec/C-Spec Committee · Rule change · TB 24-07 (2024-07 Fastrack)

In B-Spec, GCR Section 9.1.10.E.25., remove in its entirety and renumber.

2024-07-01 T4 MINI Cooper S Spec Lines Corrections.

#36086 from David Oliveira · Rule change · TB 24-07 (2024-07 Fastrack)

In T4 Spec Lines, Mini Cooper S (02-04), delete spec line in its entirety.
In T4 Spec Lines, Mini Cooper S (05-06), change Model as follows:
"Mini Cooper S R53 (0205-06)"
In T4 Spec Lines, Mini Cooper S (07-13), change Model and Notes as follows:
"Mini Cooper S R56 (07-13)"
Notes: "The following items must remain stock: shock/struts (including mounts), original wheels, and transmission
differential - unless specified below. Convertible model not allowed. Factory optional limited slip differential allowed.
JCW struts (F) 31 31 6 768 410 (R)33 52 6 768 412, springs (F)31 33 6 768 415 (R)33 53 6 768 418. May de-camber

2024-07-01 T4 Allow Removal of Sound Tubes

#36130 from Coyote Black · Rule change · TB 24-07 (2024-07 Fastrack)

In GCR Section 9.1.9.2.D.1.b., add the following:
"2. OEM intake- Chambers, resonators and acoustic devices may be removed, provided; that their ports are located
prior to any required restrictor, their ports are completely sealed, and that the part serves no other purpose."

2024-07-01 B-Spec Correct error for rear brakes of Hyundai/Kia

#36174 from B-Spec/C-Spec Committee · Rule change · TB 24-07 (2024-07 Fastrack)

In B-Spec Spec Lines, Hyundai Accent Hatchback (12-19), change brakes as follows:
"(R) 9.9 drum or 10.3 drum disc"
In B-Spec Spec Lines, Kia Rio Hatchback (12-19), change brakes as follows:
"(R) 10.3 drum disc"

2024-07-01 T4 B8/8.5 Audi S4 T3 and T2

#36195 from Brian Leib · Rule change · TB 24-07 (2024-07 Fastrack)

In T3 Spec Lines, Classify Audi S4 (2000-2002) as follows and allow the T2 spec line to expire.

A specification table follows in the original; it is not shown here.

2024-08-01 B-Spec Update Tire Rules

#35984 from B-Spec/C-Spec Committee · Rule change · TB 24-08 (2024-08 Fastrack)

In GCR Section 9.1.10.E.7. change as follows:
"a. For the remainder of 2023, B-Spec entrants will be allowed to compete on both Hankook and Goodyear Tires. For B-
Spec: tires shall be Hankook 205/50R15 C51, Hankook 200/580R15 Z217, P205/50Z R15 Goodyear Eagle RS (Dry tire) Catalog
#D4850 or P205/50ZR15 Goodyear Eagle RS-R (Wet tire) Catalog #D4851. Effective 1-1-2024 Hankook Tires will be allowed at
regional events only, through 6-30-2024. Effective 7-1-2024 Goodyear is the only legal specified tire allowed in B-spec for all
events. Mixing wet and dry tires is not permitted. Tires may not be modified. All B-Spec competitors are required to place two (2)
12-inch or larger “Goodyear” decals on their cars, one on each side of the car above the front tire.
C-Spec: Tires shall be 225/45R17. No Mixing of wet and dry tires on the same car is not permitted. Tires must be run unmodified.

2024-08-01 B-Spec BOP help for the automatic B-Specs

#36161 from B-Spec/C-Spec Committee · Rule change · TB 24-08 (2024-08 Fastrack)

In B-Spec Spec Lines, change as follows:
Chevrolet Sonic Sedan AT
Notes: "33 5mm"
Chevrolet Sonic Hatchback AT
Notes: "34 6mm"
Honda Fit AT (07-08)
Weight (lbs): "2400 2350"
Notes: "Any aftermarket header allowed."

2024-08-01 HP Errant entry in HP production line item

#36231 from Angus Crome · Rule change · TB 24-08 (2024-08 Fastrack)

In HP Spec Lines, change Track (F/R)mm/(in.) as follows:
Volkswagen Golf (GTI, GT, GL) (85-92): "2 1537/1529 (60.5/60.2)"
Volkswagen Jetta (GLI, GL) (85-92): "2 1537/1529 (60.5/60.2)"

2024-08-01 T4 T4 Camaro V6 weight reduction

#36232 from Ted Warning · Rule change · TB 24-08 (2024-08 Fastrack)

In T4 Spec Lines, Chevrolet Camaro V-6 (96-02), change weight as follows:
"3250 3150"

2024-08-01 B-Spec Require hood pins

#36233 from Frank Schwartz · Rule change · TB 24-08 (2024-08 Fastrack)

In GCR, Section 9.1.10.E.41., change as follows:
"Optional Hood Pins may be added to supplement the original hood latch system. All parts of the original hood latch system
must remain in the car. Installation of hood pins is recommended but not required. If hood pins are used, the factory release and
cable must be removed, but the secondary latch may be retained. Vehicles equipped with plastic release cables may replace them
with steel units. The OEM hood release latch may be relocated."

2024-08-01 B-Spec Sonic Caliper Pistons

#36238 from Jonathan Wickert · Rule change · TB 24-08 (2024-08 Fastrack)

In B-Spec Spec Lines, change Chevrolet Sonic Sedan MT (12-19), add to Notes the following:
"Allow Babyface Fabrication brake caliper piston SNC-SS."
In B-Spec Spec Lines, change Chevrolet Sonic Sedan AT (12-19), add to Notes the following:
"Allow Babyface Fabrication brake caliper piston SNC-SS."
In B-Spec Spec Lines, change Chevrolet Sonic Hatchback MT (12-19), add to Notes the following:
"Allow Babyface Fabrication brake caliper piston SNC-SS."
In B-Spec Spec Lines, change Chevrolet Sonic Hatchback AT (12-19), add to Notes the following:
"Allow Babyface Fabrication brake caliper piston SNC-SS."

2024-08-01 T4 BOP adjustment for ND MX5s

#36345 from Touring Committee · Rule change · TB 24-08 (2024-08 Fastrack)

In T4 Spec Lines, change Weight (lbs) as follows:
Mazda MX-5 Miata/Club (16-18): "2700 2650"
Mazda MX5 Miata/Club/ RF (19-24): "2800 2750"

2024-11-01 B-Spec Scion IA/Toyota Yaris/Mazda 2 DY chassis suspension

#35780 from Derrick Ambrose · Rule change · TB 24-09 (2024-09 Fastrack)

In B-Spec Spec Lines, Toyota/Scion IA Sedan (16-20), change Notes as follows:
"38mm FPR. (Effective 11/1/2024) Allow ST Suspension Kit 13275022. This configuration is not currently eligible for Runoffs
competition. This car must compete in three (3) separate Super Tour weekends so that performance data can be collected. In
addition to SCCA data box, OBDII data collected via an AIM or similar device must be submitted."

2024-11-01 HP 1275 HP Spridget Level 2 Only

#36518 from Darryl Saylor · Rule change · TB 24-09 (2024-09 Fastrack)

In HP Spec Lines, Austin-Healey Sprite MkI, II, III, IV MG Midget (ALL) - Level 2 - 1275cc, change Notes as follows:
"(Effective 11/1/2024) Compression ratio limited to 11 12.0:1"
In HP Spec Lines, Austin-Healey Sprite MkI, II, III, IV MG Midget (ALL) - Level 2 - 1098cc, change Notes as follows:
"(Effective 11/1/2024) Compression ratio limited to 11 12.0:1"

2024-11-01 FC 9.1.1.10.h. FC Tire Rule

#36533 from SCCA Staff · Rule change · TB 24-09 (2024-09 Fastrack)

In FC, GCR section 9.1.1.B.10.h, change as follows:
"(Effective 11/1/2024) FC is permitted a maximum of four (4) dry tires and four (4) wet tires for all Regional, Major, and Super
Tour events; eight (8) dry tires and eight (8) wet tires are permitted for the Runoffs. This is effective beginning with the first (1st)
qualifying session of the event. Marked tires are not required for The tire limit does not apply to testing or practice. It is the
competitor's responsibility to ensure that the tires are declared, marked, and logged by Tech immediately upon conclusion of the
first qualifying session, as provided in the event supplemental regulations, or per the instructions of the Race Director or Chief
Steward. in advance of the tire(s) being used in a qualifying session or race. Failure to participate on marked Use of tires in
excess of the number allowed will result in a penalty. Failure to participate on declared/marked/logged tires after the time

2024-11-01 B-Spec Clean up 07-08 Honda Fit AT Notes Section

#36542 from B-Spec/C-Spec Committee · Rule change · TB 24-09 (2024-09 Fastrack)

In B-Spec Spec Lines, Honda Fit AT 07-08, change Notes as follows:
"(Effective 11/1/2024) Allow damper and spring set 51600F23SA100, Damper FR LH 51605F23SA100, Damper FR RH
51606F23SA100, Damper RR 52610F23SA100, Spring adjust asy RR 52691F23SA010. Seat upper FR spring 51688F23SA200,
51402FC4YA00 front helper spring and 51403FC4YA00 front spacer permitted. Front Damper Mount P/N 51920-F23S-A30 is
allowed. Allow rear sway bar Progress # 62.1060. Any Cold Air Intake Package allowed (any manufacturer). This configuration is
not currently eligible for Runoffs competition. This car must compete in three (3) separate Super Tour weekends so that
performance data can be collected. In addition to SCCA data box, OBDII data collected via an AIM or similar device must be
submitted."

2024-11-01 FC Change FF/FC Weight with Sequential Gearbox

#36651 from Robert Wright · Rule change · TB 24-11 (2024-11 Fastrack)

In FF, GCR section 9.1.1.B.20.A.3, change as follows:
"Cars running with a sequentially shifted gear box shall must add 25 10 lbs. to minimum weight."
In FC, GCR section 9.1.1.B.20.B.4, change as follows:
"Cars running with a sequentially shifted gear box shall must add 25 10 lbs. to minimum weight."

2024-11-01 HP Request for Classification of 1989-1994 Suzuki Swift GT 16V Twin

#36858 from Jorge Fabian · Rule change · TB 24-11 (2024-11 Fastrack)

In HP Spec Lines, Classify Suzuki Swift GT (89-94) as follows:

A specification table follows in the original; it is not shown here.

2024-11-01 T4 Bop Request 06-11 Honda Civic Si

#37013 from Mathew Milford · Rule change · TB 24-11 (2024-11 Fastrack)

In T4 Spec Lines, Honda Civic Si (06-11), add to Notes the following:
"LSD is permitted according to category rules."

2024-12-01 T4 Redundant Verbiage Regarding Mustang Spec Lines for Driveshaft

#36484 from David Mead · Rule change · TB 24-12 (2024-12 Fastrack)

In T2 Spec Lines, change Notes as follows:
Ford Mustang V6 (11-14): "Alternate driveshaft is allowed."
Ford Mustang Boss 302 (12-13): "Alternate driveshaft is allowed."
Ford Mustang GT 5.0L (11-14): "Alternate driveshaft is allowed."
Ford Mustang GT 5.0L (15-17): "Alternate driveshaft is allowed."
Ford Mustang GT 5.0L (2018-): "Alternate driveshaft is allowed. Springs up to 800#/in front and rear permitted. Alternate
metallic driveshaft permitted."
Ford Mustang Coupe GT & Shelby GT 4.6L (05-10): "Alternate driveshaft is allowed."

2024-12-01 T4 R53 Mini Cooper S Weight Reduction Request

#36612 from Manvinder Singh · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, Mini Cooper S R53 (02-06), add to Notes as follows:
"Alta 15% Pulley #AMPENG20X allowed."

2024-12-01 T4 Allowable Wheel Offset

#36855 from Robert Maples · Rule change · TB 24-12 (2024-12 Fastrack)

In GCR Section 9.1.9.2.D.7. Wheels and Tires, change as follows:
"a. Wheels
1. Any type wheel suitable for competition may be used, provided:
a. Any wheel not exceeding the specified diameter and rim width on the vehicle’s specification line may be used. Each wheel,
measured without weights, must weigh at least 15 lbs.
b. Wheels are permitted any offset provided the tire tread (that portion of the tire that contacts the ground) does not protrude
beyond the fender opening when viewed from 9.1.9.2.Touring (T2-T4) Category Specifications GCR - 660 the top perpendicular
to the ground, unless specified differently on the individual spec line for that car. To determine compliance the vehicle should be

2024-12-01 T4 Fuel Emissions Components

#37076 from Derrick Ambrose · Rule change · TB 24-12 (2024-12 Fastrack)

In GCR, Section 9.1.9.2.D.1.c. add the following:
"5. Removal of ancillary fuel tank equipment charcoal canisters, emissions valves, and sensors allowed for OEM or aftermarket
fuel cell installations."

2024-12-01 T4 2019-2024 Mazda 3 for T4

#37077 from Derrick Ambrose · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, classify Mazda 3 (19-24), as follows:

A specification table follows in the original; it is not shown here.

2024-12-01 T4 fix brake wording

#37129 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

In GCR, Section, 9.1.9.2.D.6. Brakes, change as follows:
"a. Components
1. The make and material of brake pads and linings may be changed.
2. Brake fluid may be substituted with any brake fluid.
3. Brake rotor dust shields may be removed or replaced to accommodate brake ducts.
4. Flexible rubber brake lines may be replaced with Teflon lined, metal braided hoses.
5. Any brake ducts are permitted, but they must serve no other purpose. Fender liners may be modified solely for routing and
attachment of brake ducts. Duct intake openings may be created by the opening of 2 sections up to 14.5 square inches each in

2024-12-01 T4 Evaporative emissions systems

#37130 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

In GCR, Section, 9.1.9.2.D.1.c., add the following:
"5. Removal of ancillary fuel tank equipment; charcoal canisters, emissions valves, and sensors allowed for OEM or aftermarket
fuel cell installations."

2024-12-01 T4 Allow Spec MX5 upgrade kit for 2009-11 RX8 S2 Transmision

#37140 from Chris Braunlich · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, add the following to Notes:
Mazda RX-8 Base/R3/Sport/ GT (04-12): "Transmission kit # 0000-02-5700 permitted.
Mazda MX-5 / Club Model (06-15): "Transmission kit # 0000-02-5700 permitted."
In T3 Spec Lines, add the following to Notes:
Mazda MX-5 / Club Model (06-15): "Transmission kit # 0000-02-5700 permitted."
Mazda RX-8 Base/R3/Sport/ GT (04-12): "Transmission kit # 0000-02-5700 permitted."

2024-12-01 T4 Move Spec Boxster to T4

#37158 from Rob Piekarczyk · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, classify Porsche Spec Boxster, as follows:

A specification table follows in the original; it is not shown here.

Applies to Porsche Boxster on this page: Lynne Griffiths

2024-12-01 HP MINI Cooper Spec Line Correction - Rear Brake Rotor Diameter

#37176 from Robert Bax · Rule change · TB 24-12 (2024-12 Fastrack)

In HP Spec Lines, Mini Cooper (02-06), change Brakes Std.mm/(in.) as follows:
"(F) 276/(10.9) Vented Disc (R) 239/(9.4) 259/(10.2) Solid Disc"

Applies to Mini Cooper on this page: Tom Tuttle

2024-12-01 T4 3.7 Mustangs to T4

#37188 from Scotty B White · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, classify Ford Mustang V6 (05-14), as follows:

A specification table follows in the original; it is not shown here.

2024-12-01 T4 BMW 320i Spec Line

#37204 from chi ho · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, BMW 320i (14-15), change Notes as follows:
"**This Spec line will expire 12/31/24, Please submit to appeal** Turner Motorsports intercooler #024703TMS02 allowed."

2024-12-01 T4 MX5 2006-2015 NC Help

#37221 from Richard Mooney · Rule change · TB 24-12 (2024-12 Fastrack)

Thank you for your letter. Please see changes in letter #37281 in current Fastrack.

2024-12-01 T4 Classification for a 2005 Cadillac CTS 3.6 liter 6 speed manual

#37224 from Timothy Nash · Rule change · TB 24-12 (2024-12 Fastrack)

In T3 Spec Lines, classify Cadillac CTS (02-07) as follows:

2024-12-01 T4 Civic SI in T4

#37248 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, Honda Civic Si (06-11), change as follows:
Required Restrictor: "55mm flat plate restrictor required."
Min Weight: "2950 2900"
Notes: "The following items must remain stock: transmission differential - unless specified below. 55mm flat plate restrictor
required. LSD IS PERMITTED ACCORDING TO CATEGORY RULES"

2024-12-01 T4 2006-2015 T4 NC Mx5 spec line

#37278 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, Mazda MX-5 / Club Model (06-15), change Notes as follows:
"Factory bolt-in roll bar/cross member may be removed to facilitate roll cage installation. MSR option permitted. Suspension
package permitted with a 100 lbs. weight increase that includes the following parts: front spring mount PT#-0000-04-5259, front
springs #0000-04-9700-08, rear spring mount PT#-0000-04-5258, rear springs #0000-04-9400-07, helper springs #0000-04-HLPR-
EB (optional), Swaybar kit – PT#-0000-04-5306-EB that includes (front sway bar kit PT#0000-04- 5306-FT, rear sway bar kit PT#-
0000-04-5306-RR), offset front camber bushing PT#-0000-04- 5407-NC. Mazda Motorsports cold air intake part #0000-06-5150-
KT allowed. Mazda Motorsport RX8 rear Hub Conversion kit part number 0000-04-5811-KT allowed, RX8 front hubs PT# F189-33-
04X allowed. The SM5 suspension (only) is allowed with a 100 lbs. weight increase. Allow Mazda header part numbers 0000-06-

Applies to Mazda MX-5 on this page: Oscar Jackson

2024-12-01 T4 ND MX-5 wheel allowance

#37279 from Josh Smith · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), change Wheel Size as follows:
"17 x 7.5"

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2024-12-01 T4 T4 BOP

#37281 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, Mazda RX-8 Base/R3/Sport/ GT (04-12), change as follows:
Required Restrictor: "60mm 59mm"
Weight: "3125 3200"
In T4 Spec Lines, Mazda MX-5 / Club Model (06-15), change weight as follows:
"2600 2550"

Applies to Mazda MX-5 on this page: Oscar Jackson

2024-12-01 T4 Allow 7.5

#37286 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-24), change Wheel Size as follows:
"17 x 7.5"

2025-01-01 B-Spec Remove wheelbase from spec lines and replace with Restrictor

#36074 from B-Spec/C-Spec Committee · Rule change · TB 24-11 (2024-11 Fastrack)

In B-Spec Spec Lines that are not expiring on 1/1/25, replace Wheelbase as follows:
"(Effective 1/1/2025)Wheelbase Restrictor (mm)"
In B-Spec Spec Lines, update the value in the spec lines under the Restrictor column as follows effective 1/1/2025:
Chevrolet Sonic Sedan MT (12-19): "2525 33"
Chevrolet Sonic Sedan AT (12-19): "2525 35"
Chevrolet Sonic Hatchback MT (12-19): "2525 34"
Chevrolet Sonic Hatchback AT (12-19): "2525 36"
Fiat 500 (12-17): "2300"

2025-01-01 B-Spec Bilstein Rear Shock Request for Hyundai Accent/Kia Rio

#36965 from Alex Ratcliffe · Rule change · TB 25-01 (2025-01 Fastrack)

In B-Spec Spec Lines, Hyundai Accent Hatchback (12-19), add to Notes the following:
"Bilstein B8 shock 33-187112 approved for use in rear suspension."
In B-Spec Spec Lines, Kia Rio Hatchback (12-19), add to Notes the following:
"Bilstein B8 shock 33-187112 approved for use in rear suspension."

2025-01-01 T4 2016-2018 Mazda Miata MX5

#37085 from Nic Piekarski · Rule change · TB 25-01 (2025-01 Fastrack)

In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), change Min Weight as follows:
"2650 2575"
In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-24), add to Notes the following:
"Mazda header 0000-06-5410 allowed."

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2025-01-01 HP Request to Reduce Weight of BMW 325i/is E30 (84-91) Spec Line

#37119 from Tim Schreyer · Rule change · TB 25-01 (2025-01 Fastrack)

In EP SPEC LINES, BMW 325i/is (E30) (84-91), change Weight as follows:
"2200 2150
*2255 2204
**2310 2258"

2025-01-01 T4 Remove spec lines that have expired

#37269 from Touring Committee · Rule change · TB 24-12 (2024-12 Fastrack)

In T2, Effective 1/1/2025, delete for following Spec Lines in their entirety:
"Acura TL SHAWD (10-13)
Audi S4 (12-14)
Audi S5 (13-14)
Audi TT RS (2018-)
Cadillac ATS-V (16-17)
Cadillac CTS-V (06-07)
Chevrolet Camaro SS (98-02)

2025-01-01 HP Request to Update 1988-1991 Civic to Match 1988-1991 CRX

#37444 from ENRIK BENAZIC · Rule change · TB 25-01 (2025-01 Fastrack)

In HP SPEC LINES, Honda Civic 1.5 (88-91), change Weight as follows:
"2245 2175
*2301 2229
**2357 2284"

2025-02-01 B-Spec Remove Redundant Language from Notes Sections

#37337 from B-Spec/C-Spec Committee · Rule change · TB 25-02 (2025-02 Fastrack)

In B-Spec Spec Lines, Honda Fit AT (07-08), change Notes as follows:
"Allow damper and spring set 51600F23SA100, Damper FR LH 51605F23SA100, Damper FR RH 51606F23SA100, Damper RR
52610F23SA100, Spring adjust asy RR 52691F23SA010. Seat upper FR spring 51688F23SA200, 51402FC4YA00 front helper spring
and 51403FC4YA00 front spacer permitted. Front Damper Mount P/N 51920-F23S-A30 is allowed. Allow rear sway bar Progress
# 62.1060. Any Cold Air Intake Package allowed (any manufacturer). This configuration is not currently eligible for Runoffs
competition. This car must compete in three (3) separate Super Tour weekends so that performance data can be collected. In
addition to SCCA data box, OBDII data collected via an AIM or similar device must be submitted. Any aftermarket header
allowed. Allow rear sway bar Progress # 62.1060. Any Cold Air Intake Package allowed (any manufacturer). This configuration is

Applies to Mini Cooper on this page: Trenton Kramer, Thomas Lepper

Applies to Toyota Yaris on this page: Joseph Gersch

2025-02-01 T4 Ford Mustang V6 (05-14)

#37516 from Touring Committee · Rule change · TB 25-02 (2025-02 Fastrack)

In T4 Spec Lines, Ford Mustang V6 (05-14), change as follows:
Final drive: "3.45"
Notes: "GT/CS front bumper cover #AR3Z-17D957-BA, allowed if used with front fascia."

2025-02-01 B-Spec Expire designated spec lines

#37517 from B-Spec/C-Spec Committee · Rule change · TB 25-02 (2025-02 Fastrack)

In B-Spec Spec Lines, delete the following spec lines effective 2/1/25 in their entirety:
"Mini Cooper Countryman (R60) (11-16)"
"Cooper Paceman (R61) (11-16)"
"Nissan Versa (07-11)"
"Nissan Versa (09-11)"

2025-02-01 B-Spec Set expiration date for Nissan Micra Cup Cars (Canadian)

#37519 from B-Spec/C-Spec Committee · Rule change · TB 25-02 (2025-02 Fastrack)

In B-Spec Spec Lines, Nissan Micra Cup Car, add to Notes the following:
"This spec line will expire on 7/1/25 unless an appeal is submitted by 6/30/25."

2025-02-01 T4 Request to Classify Club Spec in Appropriate Touring Classes

#37523 from Andrew Benagh · Rule change · TB 25-02 (2025-02 Fastrack)

In T3 Spec Lines, classify Ford SCCA Club Spec Mustang (CSM) as follows:

A specification table follows in the original; it is not shown here.

Applies to Mazda MX-5 on this page: Oscar Jackson

2025-02-21 HP Effective date for Jan 2025 GCR updates

#37654 from Doug Piner · Rule change · TB 25-02 (2025-02 Fastrack)

In EP Spec Lines, add to Notes as follows:
BMW Z3 2.5LL "(Effective 2/21/2025) 52mm Flat Plate Intake Restrictor is required."
BMW Z3 2.8L (97-00): "(Effective 2/21/2025) 55mm Flat Plate Intake Restrictor is required."
BMW 328i/is E36 (96-99): "(Effective 2/21/2025) 58mm Flat Plate Intake Restrictor is required."
BMW 328i/ci E46 (01-06): "(Effective 2/21/2025) 58mm Flat Plate Intake Restrictor is required."
BMW 325i/is E46 (01-06): "(Effective 2/21/2025) 56mm Flat Plate Intake Restrictor is required."
BMW 325i/is E-36 (92-95): "(Effective 2/21/2025) 56mm Flat Plate Intake Restrictor is required."
BMW 325is M-Technic (1994): "(Effective 2/21/2025) 56mm Flat Plate Intake Restrictor is required."

2025-03-01 HP Request Competition Adjustment to BMW Z3 2.5L

#37120 from Tim Schreyer · Rule change · TB 25-01 (2025-01 Fastrack)

In EP Spec Lines, change Notes as follows:
BMW Z3 2.5LL "(Effective 3/1/2025) 56mm 52mm Flat Plate Intake Restrictor is required."
BMW Z3 2.8L (97-00): "(Effective 3/1/2025) 59mm 55mm Flat Plate Intake Restrictor is required."
BMW 328i/is E36 (96-99): "(Effective 3/1/2025) 62mm 58mm Flat Plate Intake Restrictor is required."
BMW 328i/ci E46 (01-06): "(Effective 3/1/2025) 62mm 58mm Flat Plate Intake Restrictor is required."
BMW 325i/is E46 (01-06): "(Effective 3/1/2025) 60mm 56mm Flat Plate Intake Restrictor is required."
BMW 325i/is E-36 (92-95): "(Effective 3/1/2025) 60mm 56mm Flat Plate Intake Restrictor is required."
BMW 325is M-Technic (1994): "(Effective 3/1/2025) 60mm 56mm Flat Plate Intake Restrictor is required."

2025-03-01 HP Interpretation of Production Rules on Mirrors

#37235 from Lawrence Slivinski · Rule change · TB 25-03 (2025-03 Fastrack)

In GCR, add new rule as Section 9.1.5.E.10.f:
"Any interior or exterior mirror(s) that meets rule 9.3.36 may be used."

2025-03-01 HP HP Class Adjustments

#37459 from Production Committee · Rule change · TB 25-01 (2025-01 Fastrack)

In HP SPEC LINES, change Weight as follows:
Mazda 2 (11-14)
"(Effective 3/1/2025) 1995 2045
*2045 2096
**2095 2147"
Volkswagen Golf (GTI, GT, GL) (85-92)
"(Effective 3/1/2025) 2100 2150
*2153 2204

2025-03-01 HP Weight Reduction for Honda S2000

#37466 from Michael Unger · Rule change · TB 25-03 (2025-03 Fastrack)

In EP, Spec Lines make the following weight changes:

A specification table follows in the original; it is not shown here.

2025-03-01 HP Mazda 1999 Miata 1.8L

#37488 from Joe Carr · Rule change · TB 25-03 (2025-03 Fastrack)

In EP Spec Lines, make the following weight change:
Mazda MX-5 /Miata (99-05):
"2150 2100
*2204 2153
**2258 2205"

2025-03-01 B-Spec Toyota Yaris Hatchback (12-18) rear disc brakes

#37530 from B-Spec/C-Spec Committee · Rule change · TB 25-03 (2025-03 Fastrack)

In B-Spec Spec Lines, Toyota Yaris Hatchback (12-18), please add to Brakes (inches) as follows:
"(F) 10.0 (R) 7.9 drum or 10.2 disc"

2025-03-01 B-Spec Yaris Speed Sensor

#37536 from B-Spec/C-Spec Committee · Rule change · TB 25-03 (2025-03 Fastrack)

In B-Spec Spec Lines, Toyota Yaris Hatchback (12-18) AND Toyota Yaris Sedan (07-12), add to Notes the following:
"Speed sensor may be disconnected."

2025-03-01 HP MINI Cooper (07-13) Spec Line Correction: Errors and Omissions

#37560 from Robert Bax · Rule change · TB 25-03 (2025-03 Fastrack)

In HP Spec Lines, Mini Cooper (07-13) (includes 09-15 convertible and 12-15 Coupe), change as follows:
Engine Type:
"4 Cyl
SOHC DOHC"
Notes:
"Compression ratio limited to 11.0:1, Valve lift limited to .450”.390"."

Applies to Mini Cooper on this page: Tom Tuttle

2025-03-01 B-Spec Set Expiration Date For Fiat 500

#37689 from B-Spec/C-Spec Committee · Rule change · TB 25-03 (2025-03 Fastrack)

In B-Spec Spec Lines, Fiat 500 (12-17), please add to Notes the following language:
"This spec line will expire on 1/1/26 unless an appeal is filed."

2025-04-01 B-Spec 2025 BOP Recommendations

#37520 from B-Spec/C-Spec Committee · Rule change · TB 25-04 (2025-04 Fastrack)

In B-SPEC Spec Lines, change as follows:
Honda Fit MT (09-14): "Any Cold Air Intake Package allowed (any manufacturer) Allow Injen Intake SP1512, K&N Intake 69-
1017TTK, or HPS intake 827-102 with a 25lb adder."
Mazda2 (10-14): "Exhaust Header (cat delete) HB.EM 60-404-S-SS, HP-MZD001 allowed with a 50lb adder, or Mazda
Motorsports PN 0000- 06-2410 permitted with no weight adder."
Mini Cooper (R56) MT (07-10): "44 5 FPR (OE Catalyst)"
Mini Cooper (R56) AT (07-10): "46 7 FPR (OE Catalyst)"
Mini Cooper Clubman (R55) (07-10): "44 5 FPR (OE Catalyst)"

2025-04-01 B-Spec Hyundai/Toyota Factory Rear Disc Models

#37534 from B-Spec/C-Spec Committee · Rule change · TB 25-04 (2025-04 Fastrack)

In B-SPEC Spec Lines, add to Notes the following:
Hyundai Accent Hatchback (12-19): "Vehicles equipped with rear drum brakes subtract 25 lb."
Toyota Yaris Hatchback (12-18): "Vehicles equipped with rear disc brakes add 25 lb."

2025-04-01 HP Request for Classification of Chevrolet Spark

#37755 from Kristian Smith · Rule change · TB 25-04 (2025-04 Fastrack)

In HP Spec Lines, classify the Chevrolet Spark (16-22):

A specification table follows in the original; it is not shown here.

2025-04-01 B-Spec Request to Update the Spec line for Hyundai Accent and Kia Rio

#37880 from Alex Ratcliffe · Rule change · TB 25-04 (2025-04 Fastrack)

In B-SPEC Spec Lines, add to Notes as follows:
Hyundai Accent Hatchback (12-19): "Bilstein B14 kit #4716 → 7490 front shocks verified compatible. Allow BabyFace Fabrication
sump extension #BF-HYU-PAN."
Kia Rio Hatchback (12-19): "Bilstein B14 kit #4716 → 7490 front shocks verified compatible. Allow BabyFace Fabrication sump
extension #BF-HYU-PAN."

2025-04-01 HP Request to Lower Ford Festiva Minimum Weight to 1600 LBS

#37939 from Doug DeRonne · Rule change · TB 25-04 (2025-04 Fastrack)

In HP Spec Lines "Ford Festiva (88-93)" change as follows:
Weight:
"1700 1600
*1743 1640
**1785 1680"
Notes:
"Compression ratio limited to 10.5 11.0:1. Valve lift limited to .450”."

2025-05-01 B-Spec Correct Hyundai/Kia Model Years

#37943 from B-Spec/C-Spec Committee · Rule change · TB 25-05 (2025-05 Fastrack)

In B-Spec Spec Lines, correct model years as follows:
"Hyundai Accent Hatchback (12-19 7)"
"Kia Rio Hatchback (12-19 5)"

2025-05-01 B-Spec 07-08 Honda Fit MT Requests

#37974 from Caleb Patrie · Rule change · TB 25-05 (2025-05 Fastrack)

In B-SPEC Spec Lines, Honda Fit MT (07-08), change as follows:
Minimum weight: "2400 2450"
Notes: "OEM exhaust manifold required. Primary catalyst may be removed."

2025-05-01 B-Spec Add B14 Kit Part # to Honda Fit (07-08) Spec line

#38010 from B-Spec/C-Spec Committee · Rule change · TB 25-05 (2025-05 Fastrack)

In B-SPEC Spec Lines, Honda Fit (07-08) MT, add to Notes the following:
"Bilstein B14 kit 4717 → 2401 verified compatible."
In B-SPEC Spec Lines, Honda Fit (07-08) AT, add to Notes the following:
"Bilstein B14 kit 4717 → 2401 verified compatible."

2025-05-01 T4 Correct Ring and Pinion Ratio to T3, Sorry I Mean T4 3.7 V6 Stang

#38041 from David Mead · Rule change · TB 25-05 (2025-05 Fastrack)

In T4 Spec Lines, Ford Mustang V6 (05-14), add to Notes the following:
"GT 8.8 rear axle assembly allowed. 3.45 or 3.55 final drive ratio allowed. 7.5 rear axle assembly with 3.45:1 final drive allowed."

2025-05-01 T4 T4 Mustang

#38058 from Scotty B White · Rule change · TB 25-05 (2025-05 Fastrack)

In T4 Spec Lines, Ford Mustang V6 (05-14), add to Notes as follows:
"OEM style rear deck spoiler similar to Laguna/CS packages permitted.”

2025-06-01 B-Spec Add Sedan spec lines for Hyundai & Kia

#37537 from B-Spec/C-Spec Committee · Rule change · TB 25-06 (2025-06 Fastrack)

In B-SPEC Spec Lines, classify Hyundai Accent Sedan (12-17) as follows:
B-SPEC Bore x
Stroke(mm)
Displacement
(cc)
Gear Ratios Final

A specification table follows in the original; it is not shown here.

2025-06-01 B-Spec Shifter Bushing Questions.

#38048 from Eric Yagel · Rule change · TB 25-06 (2025-06 Fastrack)

In B-SPEC Spec Lines, Honda Fit MT (09-14) add to Notes the following:
"Allow Acuity Shifter Base Bushing Kit 1954."

2025-06-01 T4 T4 Mustang

#38059 from Scotty B White · Rule change · TB 25-06 (2025-06 Fastrack)

In T4 Spec Lines, Ford Mustang V6 (05-14), change as follows:
Final Drive: "3.45 or 3.31"
"Weight: "3400 3300"

2025-06-01 T4 SSC tire allowance

#38216 from Benjamin Bunk · Rule change · TB 25-06 (2025-06 Fastrack)

In T4 Spec Lines, Scion FR-S Solo Spec Coupe (13-16), change Notes as follows:
"Any 200TW 225/45/17 or 215/45/17 DOT tire permitted."
In T4 Spec Lines, Subaru BRZ Solo® Spec Coupe (13-16), change Notes as follows:
"Any 200TW 225/45/17 or 215/45/17 DOT tire permitted."

Applies to Scion FR-S on this page: Tony Kiratsous

2025-06-01 HP Base Weight Adjustment for H-Production X1/9 Spec Lines

#38255 from Matthew Brannon · Rule change · TB 25-06 (2025-06 Fastrack)

In HP Spec Lines, change Weight as follows:
Fiat X-1/9 & Bertone1500: “1790 1740 *1835 1784 **1880 1827”
Fiat X-1/9 1300: “1650 1600 *1691 1640 **1733 1680”
Fiat X-1/9 1300: “2060 2010”
Fiat X-1/9 1500: “1950 1900”

2025-06-01 B-Spec Add Weapon R Intake to Honda Fit MT (09-14) Spec Line

#38306 from B-Spec/C-Spec Committee · Rule change · TB 25-06 (2025-06 Fastrack)

In B-SPEC Spec Lines, Honda Fit AT (09-14), add to Notes the following:
"Weapon R Intake 301-166-301"

2025-06-01 B-Spec Update Rule 46

#38307 from B-Spec/C-Spec Committee · Rule change · TB 25-06 (2025-06 Fastrack)

In GCR, Section 9.1.10.E.46. change as follows:
"Aftermarket shift knobs are allowed and shift levers mat y be bent or extended, however the shift linkage/cables must remain
stock and may not be modified in any way. Approved aftermarket shift linkage bushings are permitted."

2025-07-01 T4 Allow B-Spec cars to run in T4

#38439 from Derrick Ambrose · Rule change · TB 25-07 (2025-07 Fastrack)

In GCR, Section 9.1.9.2, Touring car eligibility, change as follows:
"Touring car eligibility: Cars are eligible for the class they are listed with a specification line and with the specific allowances
permitted. In addition T2-T4 cars may race one class up in touring classes above their specification line class as long as they are a
legal T2-T4 car and conform to their specification line allowances as classified. Cars conforming to B-Spec or C-Spec rules are
permitted to compete in Touring 4."

2025-07-01 HP BMW Z4 update

#38490 from Bryce McGuire · Rule change · TB 25-07 (2025-07 Fastrack)

In EP Spec Lines, BMW Z4 (03-05), add to Notes the following:
“52mm Flat Plate Intake Restrictor.”

2025-07-01 HP EP Fiat 124 Spider Competition Adjustment Request

#38498 from John Baucom · Rule change · TB 25-07 (2025-07 Fastrack)

In EP Spec Lines, Fiat 124 Sport Spider 1600 & 124 Spider 2000, change as follows:
Weight: "2050 2000"
Carburetor No. & Type: "(2) Weber 40 IDF-40IFI, (2) Solex C40P116, 34 36mm choke(s) req’d, (2) Weber 45DCOE w/ 34 36 mm
choke(s) on I.R. manifold or fuel injection."

2025-08-01 B-Spec Disabling 2 Pedal Shutdown

#38354 from Eric Yagel · Rule change · TB 25-08 (2025-08 Fastrack)

In B-Spec Spec Lines, Honda Fit MT (09-14), add to Notes the following:
"Two pedal shutdown may be disabled by cutting/de-pinning pin 42 (BKSW) at the main ECU connector in the engine bay."

2025-08-01 T4 Incorrect Touring Heading

#38451 from Terry Hanushek · Rule change · TB 25-08 (2025-08 Fastrack)

In T2-T4 Spec Lines, change Table Header as follows:
"T2 ET"

2025-08-01 B-Spec Update Honda Fit MT (07-08) Intake Allowance

#38530 from B-Spec/C-Spec Committee · Rule change · TB 25-08 (2025-08 Fastrack)

In B-Spec Spec Lines, Honda Fit MT (07-08), change Notes as follows:
"Bilstein B14 kit 47172401 verified compatible. Allow rear sway bar Progress #62.1060. Any Cold Air Intake Package allowed (any
manufacturer). Allow Injen Intake SP1511. This configuration is not currently eligible for Runoffs competition. This car must
compete in three (3) separate Super Tour weekends so that performance data can be collected. In addition to SCCA data box,
OBDII data collected via an AIM or similar device must be submitted. OEM exhaust manifold required. Primary catalyst may be
removed."

2025-09-01 B-Spec Remove Asterisk from Rule 9

#38768 from B-Spec/C-Spec Committee · Rule change · TB 25-09 (2025-09 Fastrack)

In GCR, Section 9.1.10.D.9, change as follows:
"* If car is used on public roads, these items should be replaced, reactivated, rearmed, etc. when not in competition."

2025-10-01 HP HP Plymouth Arrow spec omission

#38995 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

In HP Spec Lines, Plymouth Arrow (76-80), add the following wording to Trans. Speeds(max):
"4 or 5"

2025-10-01 HP Add Wheel Diameter to Appendix G

#39008 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

In Appendix G.2.3, change as follows:
"Rim width and diameter are is absolute maximums."

2025-10-01 HP Add TB ID tolerance to general Prod rules

#39009 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

In GCR, Section 9.1.5.E., change as follows:
9.1.5.E.1.b.4: "The inside dimensions of the throttle body casting/housing (as measured at the throttle butterfly) must remain
stock (tolerance of +/-.25mm), but the throttle body can otherwise be ported and polished."
9.1.5.E.2.b.4: "The inside dimensions of the throttle body casting/housing and all dimensions of the throttle butterfly must
remain stock (tolerance of +/-.25mm)."

2025-11-01 B-Spec Alternate Shift Cable Bushings and Rear Spring Seats

#38472 from Caleb Patrie · Rule change · TB 25-09 (2025-09 Fastrack)

In B-Spec Spec Lines, Honda Fit MT (07-08), add to Notes the following:
"(Effective 11/1/2025) Allow Torque Solution Shifter Cable Bushing kit TS-SCB-506."

2025-11-01 B-Spec Fiesta BOP Adjustment

#38847 from B-Spec/C-Spec Committee · Rule change · TB 25-09 (2025-09 Fastrack)

In B-Spec Spec Lines, Ford Fiesta Hatchback (11-19), change as follows:
Weight (lbs): "(Effective 11/1/2025) 2470 2525"
Restrictor (mm) & Type: "(Effective 11/1/2025)39 FPR 40 FPR"
In B-Spec Spec Lines, Ford Fiesta Sedan (11-19), change as follows:
Weight (lbs): "(Effective 11/1/2025) 2470 2525"
Restrictor (mm) & Type: "(Effective 11/1/2025)38 FPR 39 FPR"

2025-11-01 HP Please Lower Weight of 280Z

#38871 from Matthew Miller · Rule change · TB 25-09 (2025-09 Fastrack)

In EP Spec Lines, Nissan 280Z, change Weight (lbs) as follows:
"(Effective 11/1/2025) 2560 2400
*2624 2460
**2688 2520"

2025-11-01 HP Miata Weight Adjustment Follow Up

#38949 from Don Tucker · Rule change · TB 25-10 (2025-10 Fastrack)

In EP Spec Lines, Mazda MX-5 / Miata 1.8L (90-97), Effective 11/1/2025 make the following weight change:
"2150 2125"

2025-11-01 T4 02-06 Mini Cooper Gear Ratios

#38966 from Trenton Kramer · Rule change · TB 25-11 (2025-11 Fastrack)

In T4 Spec Lines, Mini Cooper S R53 (02-06), change Gear Ratios as follows:
"12.79, 7.79, 5.65, 4.62, 3.83, 3.13 or overall- 11.42, 7.18, 5.39, 4.40, 3.65, 2.96"

2025-11-01 HP Weight Break for 1098 Midget / Sprite

#38970 from Kendall Jones · Rule change · TB 25-10 (2025-10 Fastrack)

In HP Spec Lines, Austin-Healey Sprite/Midget 1098cc, Effective 11/1/2025make the following weight change:
"1630 1550"

2025-11-01 T4 Reinstatement of the 2005-2010 Cobalt into T4

#38987 from Tim Little · Rule change · TB 25-11 (2025-11 Fastrack)

In T4 Spec Lines, classify Chevrolet Cobalt SS, Sport Coupe (06-10) as follows:

A specification table follows in the original; it is not shown here.

2025-11-01 HP HP Volvo 142 spec omission

#38994 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

In HP Spec Lines, Volvo 142/142E P-1800 Engine, Effective 11/1/2025 add the following wording to Notes:
"Comp. Ratio limited to 12.0:1. Valve lift limited to .425”."

2025-11-01 HP HP Mini DOHC 1.6

#38996 from Production Committee · Rule change · TB 25-10 (2025-10 Fastrack)

In HP Spec Lines, Mini Cooper (07-13) (includes 09-15 convertible and 12-15 Coupe), Effective 11/1/2025 make the following
changes to the Notes:
"Compression ratio limited to 11.0:1, Valve lift limited to .450”.390"."

2025-11-01 B-Spec Request to Remove Rear Shock From Spec Line Hyundai Accents/Kia

#39017 from Alex Ratcliffe · Rule change · TB 25-11 (2025-11 Fastrack)

In B-Spec Spec Lines, Hyundai Accent Sedan (12-17), change Notes as follows:
"Bilstein B8 shock 33- 187112 approved for use in rear suspension."
In B-Spec Spec Lines, Kia Rio Sedan (12-17), change Notes as follows:
"Bilstein B8 shock 33- 187112 approved for use in rear suspension."

2025-11-01 HP Add to Rabbit description

#39019 from Production Committee · Rule change · TB 25-11 (2025-11 Fastrack)

In FP Spec Lines, make the following spec line correction:
"Volkswagen Rabbit (Includes Convertible Cabriolet)"
In HP Spec Lines, make the following spec line correction:
"Volkswagen Rabbit 1588 (Includes Cabriolet)"
"Volkswagen Rabbit 1715 (Includes Cabriolet)"
"Volkswagen Rabbit 1780 (Includes Cabriolet)"

2025-11-01 HP Clean-up 9.1.5.E.7e

#39025 from Production Committee · Rule change · TB 25-11 (2025-11 Fastrack)

In GCR, Section 9.1.5.E.7., change as follows:
"e. Cars fitted with rear drum brakes, can convert to rear disc brakes without penalty. Note that the “Brakes Std.” and “Brakes
Alt.” listings on a vehicle’s spec line do not prohibit a car that was fitted with rear drum brakes stock, from converting to rear
disc brakes under this rule. When converting from rear drum brakes to rear disc brakes:
1. Rear brake rotors must be solid and can be no larger in diameter than the largest permitted front brake rotor, as defined on
the vehicle’s spec line.
2. Rear calipers and mounting brackets are unrestricted but must be made of a ferrous or aluminum material. The standard and
alternate brake listings on a vehicle’s specification line, does not prohibit a car that was fitted with rear drum brakes as stock

2025-11-01 B-Spec Update Honda Fit MT (07-08) Runoffs Eligibility

#39060 from B-Spec/C-Spec Committee · Rule change · TB 25-11 (2025-11 Fastrack)

In B-Spec Spec Lines, Honda Fit MT (07-08), change Notes as follows:
"Bilstein B14 kit 47172401 verified compatible. Allow rear sway bar Progress #62.1060. Allow Injen Intake SP1511 OEM exhaust
manifold required. Primary catalyst may be removed. This configuration is not currently eligible for Runoffs competition. This car
must compete in three (3) separate Super Tour weekends so that performance data can be collected. In addition to SCCA data
box, OBDII data collected via an AIM or similar device must be submitted. (Effective 11/1/2025) Allow Torque Solution Shifter
Cable Bushing kit TS-SCB-506."

2025-11-01 T4 Request to Classify Mercedes C230K

#39080 from Patrick Morgan · Rule change · TB 25-11 (2025-11 Fastrack)

In T4 Spec Lines, classify Mercedes C230 Kompressor (2002-2005) as follows:

A specification table follows in the original; it is not shown here.

2025-11-01 HP Add TB size to Ford Mustang (94-98) Spec Line

#39130 from Production Committee · Rule change · TB 25-11 (2025-11 Fastrack)

In EP Spec Lines, Ford Mustang (94-98) add the following to the Fuel Injected Equipped Throttle Body Inside Diameter column:
"60"

2025-11-01 T4 ND Gearset Request for T4

#39166 from Josh Smith · Rule change · TB 25-11 (2025-11 Fastrack)

In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-24), add to Notes the following:
"Gear kit Kit PT#- 0000-02-6100."
In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), add to Notes the following:
"Gear kit Kit PT#- 0000-02-6100."
In T3 Spec Lines, Mazda MX-5 Miata (16-18), add to Notes the following:
"Gear kit Kit PT#- 0000-02-6100."
In T3 Spec Lines, Mazda MX-5 Global Cup Miata (2016-2021) ND1, ND, add to Notes the following:
"Gear kit Kit PT#- 0000-02-6100."

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2025-11-01 T4 E&O wheel size on ND

#39168 from Josh Smith · Rule change · TB 25-11 (2025-11 Fastrack)

In T4 Spec Lines, Mazda MX-5 Miata/Club (16-18), change Wheel Size (in.) as follows:
"17 x 7.5"

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2025-11-01 T4 ND Spec Lines Wrong PT#'s

#39170 from Josh Smith · Rule change · TB 25-11 (2025-11 Fastrack)

In T4 Spec Lines, Mazda MX5 Miata/Club/ RF (19-24), change Notes as follows:
"Factory bolt-in roll bar/ cross member may be removed to facilitate roll cage installation. The following item(s) must remain
stock: transmission differential unless specified below. Retractable hardtop option permitted but must be disabled from moving
action and positively fastened. Any OEM or aftermarket hardtop is permitted that retains the OEM roof silhouette, including
Mazda hardtop part #0000-07-5902-ND and part #0000-07-5901 (discontinued DG Motorsports). 29mm (f) 16mm (r) sway bars
allowed. 3rd and 4th gear may be replaced with the following parts- (0000-02-5803-02, 0000-02-5803-01, 0000-02-5804-02,
0000-02-5804-01). Suspension package permitted with a 100 lbs. weight increase that includes the following parts: front springs
#0000-04-9700-08, springs up to 500lb front and 300lb rear allowed. Mazda tower brace 0000-04-5626 allowed. Mazda header

Applies to Mazda MX-5 on this page: Oscar Jackson

Applies to Mazda Miata on this page: Kristina Etherington, Kayla Etherington

2025-11-01 T4 Touring 4 Post-Runoffs BOP Adjustments and Changes

#39251 from Touring Committee · Rule change · TB 25-11 (2025-11 Fastrack)

In T4 Spec Lines, Acura RSX/ RSX Type-S (02-06), change Restrictor as follows:
"55mm FPR"
In T4 Spec Lines, Acura TSX (2004-2008), change Restrictor as follows:
"47mm FPR 52mm FPR"
In T4 Spec Lines, BMW Z4 2.5L (03-05) , change Weight as follows:
"3050 2950"
In T4 Spec, BMW 320i (14-15), remove this spec line in its entirety.
In T4 Spec Lines, BMW 323 (98-00), change as follows:

Applies to Mazda MX-5 on this page: Oscar Jackson

2025-12-01 HP Request to Re-Classsify Datsun SPL-311 to HP from FP

#39116 from Robert Heatwole · Rule change · TB 25-12 (2025-12 Fastrack)

In HP Spec Lines, classify Nissan/Datsun SPL 311 as follows:

A specification table follows in the original; it is not shown here.

2025-12-01 HP TR2 Notes E&O

#39180 from Anthony Parker · Rule change · TB 25-12 (2025-12 Fastrack)

In EP Spec Lines, Triumph TR2, 3, 3A, 4, 4A, TR4, TR4A, IRS, make the following change to the Notes:
"Front apron assembly may be made of alternate material. Three (3) Weber 40 DCOE on IR manifold with 28mm chokes @ 1990
lbs. Laycock overdrive, may use 5 speed gearbox without overdrive."

2025-12-01 HP Balance of Power

#39187 from Jim Simaras · Rule change · TB 25-12 (2025-12 Fastrack)

In EP Spec Lines, make the following changes to Restrictors:
BMW Z3 2.5L: "52mm 50mm Flat Plate Intake Restrictor"
BMW Z3 2.8L (97-00): "55mm 53mm Flat Plate Intake Restrictor"
BMW 328i/is E36 (96-99): "58mm 55mm Flat Plate Intake Restrictor"
BMW 328i/ci E46 (01-06): "58mm 55mm Flat Plate Intake Restrictor"
BMW 325i/is (E46) (01-06): "56mm 53mm Flat Plate Intake Restrictor"
BMW 325is M-Technic (1994): "56mm 53mm Flat Plate Intake Restrictor"
BMW 325i/is E-36 (92-95): "56mm 53mm Flat Plate Intake Restrictor"

2025-12-01 HP Alternative BOP Request for 84-87 Honda CRX/Civic

#39223 from Bill Lamkin · Rule change · TB 25-12 (2025-12 Fastrack)

In HP Spec Lines, change Wheels as follows:
Honda Civic: "13 x 6 7"
Honda Civic DX (92-95): "13 x 6 7"
Honda Civic/Si (84-87): "13 x 6 7"
Honda Civic 1.5 (88-91): "13 x 6 7"
Honda CRX/Si (84-87): "13 x 6 7"
Honda CRX 1.5(88-91): "13 x 67"

2025-12-01 T4 Classing 1995-99 Dodge Neon SOHC

#39285 from Preston Obremski · Rule change · TB 25-12 (2025-12 Fastrack)

In T4 Spec Lines, classify Dodge/Plymouth Neon ACR SOHC/DOHC (2/4 door) (95-99) as follows:

A specification table follows in the original; it is not shown here.

2026-01-01 FC F2000 MZR Spec Line Clarity/Revision Requested

#38927 from Rock Beauchamp · Rule change · TB 26-01 (2026-01 Fastrack)

In FC Charts table, USF2000 Tube Frame spec line, add the following to the Notes:
"Cars originally built with the Hewland LD200 4-speed H-pattern may use that transmission as an alternative to the Hewland JL-
200 5-speed sequential transmission."

2026-01-01 B-Spec Notes section cleanup

#39062 from B-Spec/C-Spec Committee · Rule change · TB 26-01 (2026-01 Fastrack)

In B-Spec Spec Lines, Chevrolet Sonic Sedan MT (12-19), change Notes as follows:
"GM suspension kit #23123679 permitted. Bilstein B14 kit #47-171725 verifed compatible. Allow rear sway bar ZZ Performance
#ZZ-SNCRSB. Allow Aluminum Radiator #ZZP-ZZ013. Allow Babyface Fabrication brake caliper piston SNC-SS. Approved parts: ZZ
Performance rear sway bar ZZ-SNCRSB, ZZ Performance radiator ZZP-ZZ013, Babyface Fabrication brake caliper piston SNC-SS.
Bilstein B14 kit 47-171725 verified compatible."
In B-Spec Spec Lines, Chevrolet Sonic Sedan AT (12-19), change Notes as follows:
"GM suspension kit #23123679 permitted. Bilstein B14 kit #47-171725 verifed compatible. Allow rear sway bar ZZ Performance
#ZZ-SNCRSB. For automatic allow Setrab 1-series Part No. FP119M221. Allow Aluminum Radiator #ZZP-ZZ013. Allow Babyface

Applies to Mini Cooper on this page: Trenton Kramer, Thomas Lepper

Applies to Toyota Yaris on this page: Joseph Gersch

2026-01-01 T4 Alternate Placement of Fuse Panel and Electronics Request

#39370 from Aaron Stehly · Rule change · TB 26-01 (2026-01 Fastrack)

In GCR, Section 9.1.9.2.D.9.d, add the following:
"8. Under-dash electronics including computers, modules and fuse boxes may be relocated so they can be easily accessed after
roll cage installation."

2026-01-01 B-Spec 2026 BOP Recommendations

#39475 from B-Spec/C-Spec Committee · Rule change · TB 26-01 (2026-01 Fastrack)

In B-Spec Spec Lines, change as follows:
Chevrolet Sonic Sedan AT (12-19):
Restrictor (mm) & Type: "35 FPR"
Chevrolet Sonic Hatchback AT (12-19):
Restrictor (mm) & Type: "35 FPR"
Honda Fit MT (09-14):
Weight (lbs): "2525 2550"
Honda Fit CVT (15-19):

2026-01-01 HP E/O: Improve Consistency of the Spec Lines

#39500 from Robert Bax · Rule change · TB 26-01 (2026-01 Fastrack)

In HP Spec Line, Toyota MR-2 1.6L (85-89), change Comp. Ratio as follows:
"11.0:1"

2026-01-01 T4 Clarify T4 Brake Rotor Allowance

#39503 from David Mead · Rule change · TB 26-01 (2026-01 Fastrack)

In GCR, Section 9.1.9.2.D.6.a.6., change as follows:
"In T2-Performance alternative rotors, including 2 piece rotors are permitted. Rotors must be within 5% of OE diameter or a
maximum diameter of 360mm.
In T3- Performance alternative rotors, including 2 piece rotors are permitted with a maximum diameter of 360mm.
T4- Performance alternative 1-piece rotors are permitted but rotors must meet the sizes listed in the spec line. Spec lines
showing alternate brake kits are also permitted to use 1-piece performance alternative rotors of the same size."

2026-01-01 HP Request to Reclassify BMW 2002 Into H Production

#39567 from Jonathan Kinberg · Rule change · TB 26-01 (2026-01 Fastrack)

In HP Spec Lines, classify BMW 2002, as follows:

A specification table follows in the original; it is not shown here.

2026-01-01 B-Spec Expire NLA Mazda 2 Headers

#39582 from B-Spec/C-Spec Committee · Rule change · TB 26-01 (2026-01 Fastrack)

In B-Spec Spec Lines, Mazda2 (10-14), change Notes as follows:
"Exhaust Header (cat delete) HB.EM 60-404-S-SS, HP-MZD001, allowed with a 50lb adder or Mazda Motorsports PN 0000-06-
2410 with no weight adder permitted.”

2026-01-01 FC Adjust F2000 Metrik ZF2 weight

#39612 from Club Racing Board · Rule change · TB 26-01 (2026-01 Fastrack)

In FC Charts table, F2000 Metrik ZF2 spec line, change the Weight as follows:
"1240 1220"

2026-02-01 T4 T4 and T3 Feedback

#39230 from Tim Myers · Rule change · TB 26-02 (2026-02 Fastrack)

In T4 Spec Lines, remove Ford Mustang V6 (05-14) in its entirety.

2026-02-01 T4 T4 Mustang 4.0

#39489 from Scotty B White · Rule change · TB 26-02 (2026-02 Fastrack)

In T4 Spec Lines, Ford Mustang V6 (05-10), change as follows:
Tire: "245 255"
Notes: "ABS (option code 552) allowed. FR3 Handling Pack #M-2007-FR3V6 allowed (kit does not need to be run in its entirety).
The kit includes: Dampers M-18000-A, Lowering Springs M-5300-N, Sway Bars M- 5490-C, Strut Tower Brace M-20201-F. Ford
Positraction LSD part #M-4204-C75 is allowed. Any springs max F: 500 and R: 400 permitted. Any sway bar up to F: 35mm and R:
28mm permitted. Aftermarket Shocks conforming to T4 rules allowed. Panhard bar, part # BAR-M-4264-A permitted, or any pan
hard bar permitted must be set at same length as a stock bar, center mounting hole to center mounting hole +/- 0.25 inch. An
alternative steel drive shaft is permitted; this drive shaft is otherwise unrestricted, but no modifications to other components

2026-02-01 HP Triumph Spitfire 1296cc Compression Ratio Increase to 12:1

#39589 from Neil Verity · Rule change · TB 26-02 (2026-02 Fastrack)

In HP Spec Lines, make the following spec line changes:
Triumph Spitfire:
Carburetion
"Valves: (I) 33.0/(1.30) (E) 29.7/(1.17)
Comp. ratio 11.0 12.0:1, Valve lift .450”
Trans. Speeds: 4"
Triumph Spitfire Mk. III & IV 1500:
Carburetion

2026-02-01 T4 Allow Alt Bushing Material in Toe Links

#39607 from David Mead · Rule change · TB 26-02 (2026-02 Fastrack)

In GCR, Section 9.1.9.D.5.a.1., change as follows:
"T2-T4: A maximum of 3.5 degrees of negative camber is allowed on front and rear suspensions. Spec line part(s) may not be
modified to increase caster and camber. Strut suspensions may adjust camber and caster by the use of eccentric bushings,
eccentric bolts (crash bolts) at the strut-to-spindle, and/or by use of slotted adjustment plates at the top of the strut mounting
plate. If upper strut slotted adjustment plates are used, they shall be located on existing chassis structure, utilizing the
unmodified manufacturer’s original bolt holes and may not serve as reinforcement for that structure. Slotted adjustment plates
(strut camber plates) may incorporate a single spherical bearing (spherical bushing) and a ball thrust bearing per strut tower. On
other forms of suspension, camber and caster adjustment may be achieved by the use of shims and/or eccentric

2026-02-01 B-Spec C-Spec Rear Sway Bars

#39652 from B-Spec/C-Spec Committee · Rule change · TB 26-02 (2026-02 Fastrack)

In C-Spec Spec Lines, change Notes as follows:
Chevrolet Cruze (2010-16):
"Allow BC Racing Q-06-BR suspension kit or RedShift Q-06-CSPEC. Allow Babyface Fabrication brake caliper piston SNC-
SS. Approved parts: BC Racing Q-06-BR or RedShift Q-06-CSPEC suspension kit, Babyface Fabrication brake caliper piston SNC-
SS, ZZ Performance ZZ-SNCRSB or Whiteline BHR93 rear sway bar.
Dodge Dart (2014-16):
"Allow BC Racing or RedShift Z-06-CSPEC kit. Approved parts: BC Racing Z-06-BR or RedShift Z-06-CSPEC kit, Progress rear sway
bar 62.0606."