P1 vs P2 vs SM vs FC pace at Michelin Raceway Road Atlanta
Quickest here:P1 1:18.122 Todd Vanacore, Atlanta Region Hoosier SCCA Super Tour @ Michelin Raceway Road Atlanta qualifying · P2 1:22.533 Lucian Pancea, Atlanta Region Hoosier SCCA Super Tour @ Michelin Raceway Road Atlanta qualifying · SM 1:42.324 Skyler Cottrell, Atlanta Region SCCA Hoosier Super Tour @ Michelin Raceway Road Atlanta qualifying · FC 1:23.672 Brandon Dixon, Atlanta Region SCCA Hoosier Super Tour @ Michelin Raceway Road Atlanta race
P1P2SMFCsolid race · dashed qualifying · slower is lower
P1P2SMFCsolid race · dashed qualifying · each class's best lap as a share of P1's at the same event (the reference class, changeable above); 100% is level, higher is quicker
Event
P1
P2
SM
FC
Qual best
Race best
Trap
Qual best
Race best
Trap
vs P1
% of P1
Qual best
Race best
Trap
vs P1
% of P1
Qual best
Race best
Trap
vs P1
% of P1
Atlanta Region SCCA Hoosier Super Tour @ Michelin Raceway Road Atlanta ST26MAR062026-03-06
1:42.324Skyler Cottrell · fastest of 52 · top 5 within 0.4s-0.524s (-0.51%)
1:42.611Charles Mactutus · fastest of 51 · top 5 within 0.2s-0.014s (-0.01%)
112.2James Newell+5.2 mph (+4.9%)
1:23.854Brandon Dixon · fastest of 3 · top 3 within 8.1s-5.116s (-5.75%)
1:23.672Brandon Dixon · fastest of 3 · top 3 within 9.3s-6.776s (-7.49%)
138.7Brandon Dixon+12.1 mph (+9.6%)
5 rule changes (SM: 3, FC: 2)1 weight · 4 wording · FC USF2000 Tube Frame may use Hewland LD200 4-speed H-pattern as alternative to Hewland JL-200 5-speed sequential. · FC F2000 Metrik ZF2 minimum weight reduced to 1220 lbs. · SMX drivers must submit data acquisition files on time or face suspension and $250 fine. · SMX penalty language clarified: level 1 and 3 infractions may carry $1,000 fine; level 2 and 4 may carry $500 fine. · SM cars limited to one set of Hoosier SM 7.5 P205/50/ZR17 per Super Tour event weekend for dry sessions.showhide
FC F2000 MZR Spec Line Clarity/Revision Requested #38927wordingneutralFC USF2000 Tube Frame may use Hewland LD200 4-speed H-pattern as alternative to Hewland JL-200 5-speed sequential.
FC Adjust F2000 Metrik ZF2 weight #39612weight -20 lbsfasterFC F2000 Metrik ZF2 minimum weight reduced to 1220 lbs.
SM SMX Data Submission - Penalties #38248wordingneutralSMX drivers must submit data acquisition files on time or face suspension and $250 fine.
SM Committee) SMX Penaly Clarification updated language #38337wordingneutralSMX penalty language clarified: level 1 and 3 infractions may carry $1,000 fine; level 2 and 4 may carry $500 fine.
SM Clarify Tire Marking Regs #38005wordingneutralSM cars limited to one set of Hoosier SM 7.5 P205/50/ZR17 per Super Tour event weekend for dry sessions.
Atlanta Region SCCA Hoosier Super Tour @ Michelin Raceway Road Atlanta ST25MAR072025-03-07
1:42.848Sean Noonan · fastest of 35 · top 5 within 0.2s+0.228s (+0.22%)
1:42.625Sean Noonan · fastest of 33 · top 5 within 0.6s-0.370s (-0.36%)
107.0Sean Noonan+1.8 mph (+1.7%)
1:28.970Eric Presbrey · fastest of 2+3.675s (+4.31%)
1:30.448Carter Sheets · fastest of 2+4.896s (+5.72%)
126.6Carter Sheets-3.0 mph (-2.3%)
12 rule changes (P1: 1, P2: 3, SM: 5, FC: 3)2 weight · 1 cars added · 1 tyres & wheels · 8 wording · P2 2000cc Pinto engine car minimum weight set to 1335 lbs. · SMX allows OE instrument cluster relocation for aftermarket dash mounting, with wiring re-routed only; alternate gauges now permitted. · FC tire limit reduced to four dry and four wet for Regional/Major/Super Tour, eight for Runoffs. · FF and FC cars with sequential gearbox must add 10 lbs. to minimum weight, down from 25 lbs. · SMX Spec MX-5 camera requirement wording changed; non-functioning recorder now grounds for penalty or disqualification. · SMX Spec MX-5 must run latest AIM Data Logger Spec MX-5 ECU Protocol; wording clarification for technical compliance. · SMX Mazda Miata OE versus OEM definitions clarified in GCR Section 9.1.7.1. · SM and SMX shifter bushing rules clarified: alternate bushing at shift lever bottom now allowed. · P1 now encourages unspecified engines including Diesel, hybrid, or electric via case-by-case request to Club Racing Board. · P2 Spec ECU engine modifications clarified: oil system, ECU, and exhaust unrestricted only. · P2 FIA Group CN spec notes clarified: Series changed to Challenge, documentation requirement moved to online link. · FC adds F2000 Metrik ZF2 with Ford Zetec engine and four-piston Brembo calipers as spec-line car.showhide
P2 2000 cc Pinto Engine Car Weight #37187weightslowerP2 2000cc Pinto engine car minimum weight set to 1335 lbs.
SM E&O SMX Regs 9.1.7.1.D.5.u-.w #37070wordingneutralSMX allows OE instrument cluster relocation for aftermarket dash mounting, with wiring re-routed only; alternate gauges now permitted.
FC 9.1.1.10.h. FC Tire Rule #36533tyres & wheelsslowerFC tire limit reduced to four dry and four wet for Regional/Major/Super Tour, eight for Runoffs.
FC Change FF/FC Weight with Sequential Gearbox #36651weightfasterFF and FC cars with sequential gearbox must add 10 lbs. to minimum weight, down from 25 lbs.
SM SMX Camera Rule Correction #36496wordingneutralSMX Spec MX-5 camera requirement wording changed; non-functioning recorder now grounds for penalty or disqualification.
SM Committee) AIM ECU Protocol #36556wordingneutralSMX Spec MX-5 must run latest AIM Data Logger Spec MX-5 ECU Protocol; wording clarification for technical compliance.
SM Committee) OE versus OEM Definitons #36608wordingneutralSMX Mazda Miata OE versus OEM definitions clarified in GCR Section 9.1.7.1.
SM Committee) Shifter Bushing #36611wordingneutralSM and SMX shifter bushing rules clarified: alternate bushing at shift lever bottom now allowed.
P1 Update GCR section 9.1.8.B.J.7 #35907wordingneutralP1 now encourages unspecified engines including Diesel, hybrid, or electric via case-by-case request to Club Racing Board.
P2 E&O - Correct FIA Group CN spec line notes #35900wordingneutralP2 FIA Group CN spec notes clarified: Series changed to Challenge, documentation requirement moved to online link.
FC Four Pot Calipers #35481cars addedneutralFC adds F2000 Metrik ZF2 with Ford Zetec engine and four-piston Brembo calipers as spec-line car.
Atlanta Region Hoosier SCCA Super Tour @ Michelin Raceway Road Atlanta ST24MAR082024-03-08
1:19.119Todd Vanacore · fastest of 3 · top 3 within 18.1s+0.997s (+1.28%)
1:19.924John Mcaleer · fastest of 3 · top 3 within 17.8s-0.010s (-0.01%)
139.8John Mcaleer-12.4 mph (-8.2%)
1:24.228Lucian Pancea · fastest of 4 · top 4 within 5.2s+1.695s (+2.05%)
1:26.233Sherman Chao · fastest of 4 · top 4 within 17.9s+2.429s (+2.90%)
134.0Lucian Pancea-12.5 mph (-8.5%)
+6.309squal +5.109s
107.9%qual 106.5%
1:42.620Danny Steyn · fastest of 47 · top 5 within 0.4s+0.001s (+0.00%)
1:42.995Charles Mactutus · fastest of 46 · top 5 within 0.1s+0.442s (+0.43%)
105.2Tyler Brown-6.9 mph (-6.2%)
+23.071squal +23.501s
128.9%qual 129.7%
1:25.295Brandon Dixon · fastest of 7 · top 5 within 4.5s+0.613s (+0.72%)
1:25.552Tim Minor · fastest of 6 · top 5 within 4.9s-1.803s (-2.06%)
129.6Tim Minor-7.1 mph (-5.2%)
+5.628squal +6.176s
107.0%qual 107.8%
19 rule changes (P1: 9, P2: 7, FC: 3)4 engine · 1 cars added · 1 weight · 13 wording · P1 removes redundant effective date language from engine stalling prohibition during SIR testing. · P1 Honda K20A-FD2 engine terminology corrected from 'spec' to proper series designation. · F600 Rotax 494, 493, 593 engines now require single expansion chamber and pull starter; electric starter optional. · F600 Rotax 494, 493, 593 engines now require single expansion chamber and pull starter; electric starter optional. · P1 4-cycle 2000cc restrictor increases to 32mm, weight rises to 1450 lbs; 2300cc restrictor to 31mm, weight to 1475 lbs. · P1 Group CN Honda K20A-FD2 removes engine modification restrictions; CRB may add intake restrictor. · P2 AMAC modified engine range clarified to 2008 and older stock engines only, restrictor 38mm, weight 1025 lbs. · P2 Suzuki GSX-R1000 07/08 engine crankcase may swap to GSX-S1000 16/19 part #11301-04840. · P2 Table 1 corrects engine date ranges and brand specifications for Stock and Modified engines across multiple car models. · FC tire marking rule clarified: four dry and wet tires for Regionals, eight each for Runoffs; damaged tire replacement procedures revised. · P1 SIR testing procedure modified: vehicle deemed compliant if stalls within 3 seconds. · P1 Single Inlet Restrictor wording clarified; all intake air or fuel-air mixture must pass through it. · P1 ducted air rule clarified: cockpit opening, fender louvers, and engine bay heat escape devices exempt from heat exchanger requirement. · USF2000 Van Diemen with Mazda MZR LF-DE 2.0L added as spec line car in FC; removed from FX. · P2 side body height requirement clarified: outermost surface between wheel openings must equal front axle centerline height. · P2 closed cockpit single seat cars now prohibited unless specifically allowed in Table 1. · P1 cockpit length dimension corrected from 23.662 to 23.622 inches; height and extension limits clarified with metric-imperial equivalents. · P2 engine table wording updated; redundant effective date language removed. · P2 motorcycle engines: 2011+ Kawasaki restrictor reduced to 34mm, minimum weight raised to 1100 lbs; 2009+ other brands weight raised to 1100 lbs.showhide
P1 Remove redundant effective date language in GCR 9.1.8.B.J.4 #35693wordingneutralP1 removes redundant effective date language from engine stalling prohibition during SIR testing.
P1 Correct engine series terminology #35694wordingneutralP1 Honda K20A-FD2 engine terminology corrected from 'spec' to proper series designation.
FC Please correct omitted punctuation #34890engineneutralF600 Rotax 494, 493, 593 engines now require single expansion chamber and pull starter; electric starter optional.
P1 Please correct omitted punctuation #34890engineneutralF600 Rotax 494, 493, 593 engines now require single expansion chamber and pull starter; electric starter optional.
P1 Adjust restrictors and weights for Engine Table lines H and I #35229weightslowerP1 4-cycle 2000cc restrictor increases to 32mm, weight rises to 1450 lbs; 2300cc restrictor to 31mm, weight to 1475 lbs.
P1 Revise Group CN Honda K20A-FD2 Spec Line #35337wordingunclearP1 Group CN Honda K20A-FD2 removes engine modification restrictions; CRB may add intake restrictor.
P2 E&O - Clarify B.1 modified engine range in AMAC spec lines #35225wordingneutralP2 AMAC modified engine range clarified to 2008 and older stock engines only, restrictor 38mm, weight 1025 lbs.
P2 Replacement Engine Crankcase for 07/08 Suzuki GSX-R1000 Engines #35340engineunclearP2 Suzuki GSX-R1000 07/08 engine crankcase may swap to GSX-S1000 16/19 part #11301-04840.
P2 Correct Table 1 for Engine Date Range Specifications #35182wordingneutralP2 Table 1 corrects engine date ranges and brand specifications for Stock and Modified engines across multiple car models.
FC Review FC Runoffs Tire Marking Rule #34274wordingneutralFC tire marking rule clarified: four dry and wet tires for Regionals, eight each for Runoffs; damaged tire replacement procedures revised.
P1 SIR Testing #34354wordingneutralP1 SIR testing procedure modified: vehicle deemed compliant if stalls within 3 seconds.
P1 E&O Single Inlet Restrictor abbreviation, etc. #34369wordingneutralP1 Single Inlet Restrictor wording clarified; all intake air or fuel-air mixture must pass through it.
P1 E&O Clean up ducted air provision #34410wordingneutralP1 ducted air rule clarified: cockpit opening, fender louvers, and engine bay heat escape devices exempt from heat exchanger requirement.
FC USF2000 Van Diemen with Mazda MZR LF-DE 2.0L in FC #34329cars addedneutralUSF2000 Van Diemen with Mazda MZR LF-DE 2.0L added as spec line car in FC; removed from FX.
P2 Clarify minimum side body height requirement #34143wordingneutralP2 side body height requirement clarified: outermost surface between wheel openings must equal front axle centerline height.
P2 Clarify closed cockpit single seat car allowance #34144wordingneutralP2 closed cockpit single seat cars now prohibited unless specifically allowed in Table 1.
P1 E&O - Correct dimensional equivalents #34018wordingneutralP1 cockpit length dimension corrected from 23.662 to 23.622 inches; height and extension limits clarified with metric-imperial equivalents.
P2 Remove redundant effective date language and update engine table #34012wordingneutralP2 engine table wording updated; redundant effective date language removed.
P2 E&O - Correct dimensional equivalents #34038engineslowerP2 motorcycle engines: 2011+ Kawasaki restrictor reduced to 34mm, minimum weight raised to 1100 lbs; 2009+ other brands weight raised to 1100 lbs.
Atlanta Region Hoosier SCCA Super Tour @ Michelin Raceway Road Atlanta ST23MAR102023-03-10
1:18.122Todd Vanacore · fastest of 5 · top 5 within 13.9s
1:19.934Jean-Luc Liverato · fastest of 3 · top 3 within 1.0s
152.2Jean-Luc Liverato
1:22.533Lucian Pancea · fastest of 4 · top 4 within 4.2s
1:23.804Lucian Pancea · fastest of 4 · top 4 within 4.6s
146.5Lucian Pancea
+3.870squal +4.411s
104.8%qual 105.6%
1:42.619Charles Mactutus · fastest of 48 · top 5 within 0.7s
1:42.553Charles Mactutus · fastest of 47 · top 5 within 0.4s
112.2Jonathan Neudorf
+22.619squal +24.497s
128.3%qual 131.4%
1:24.682Brandon Dixon · fastest of 5 · top 5 within 8.8s
1:27.355Brandon Dixon · fastest of 3 · top 3 within 4.6s
136.6Brandon Dixon
+7.421squal +6.560s
109.3%qual 108.4%
94 earlier rule changes on record, in force before Atlanta Region Hoosier SCCA Super Tour @ Michelin Raceway Road Atlanta (from 2019)9 engine · 9 induction · 6 cars added · 6 weight · 5 aero · 2 removed · 1 suspension & brakes · 55 wording · 1 other · P1 suspension covers must have symmetrical upper and lower surfaces, no airfoil shaping, cannot angle for downforce. · FC/FF PE3-8400 ECU monitor firmware version reduced from V3.04.50 to V3.04.35. · Sebeco NP01-EVO and Elan NP01 Mazda 2.0L MZR added to P2, 1600 lb minimum, no restrictor required. · P2 Radical SR3/SR4/Cup/Club Sport/Pro-Sport/PR6 removes assisted shifting requirement across all spec lines. · P2 chassis rules clarified to allow composite materials in non-fully-composite construction; anti-intrusion panel attachment standardized; Stohr and converted F600 cars added with specific allowances. · Unable to summarize: the change to P2 Engine Table Spec Line B.1 is not detailed in the provided text. · SM Mazda MX-5 Miata 01-05 weight increases to 2450 lbs, or 2465 with alternate bore. · P1 aerodynamic devices limited to 1cm below lower surfaces rear of front axle; body panels covering suspension cannot be airfoil-shaped. · P1 forced induction banned: turbocharging and supercharging no longer allowed. · P1 motorcycle-based engines with individual throttle bodies must install flat plate restrictors within 4 inches of primary butterfly. · FC Ford Zetec Performance Electronics ECU model renamed PE-3 to PE3-8400; Monitor firmware updated to V3.04.50. · P1 bodywork rules clarified: cycle fenders prohibited, side body minimum height at front axle centerline required, air ducting for downforce banned. · P2 chassis construction rules clarified: fully composite or partially composite requiring composite for mobility allowed; partial composite must roll without composite parts. · P2 classification wording cleaned up in GCR section 9.1.8.C and Contents. · P2 Oldsmobile cam rules clarify aftermarket manufacturer requirements; wording only. · SM Majors must run authorized Penske shock and mount; Regional competitors' requirement eligibility clarified. · P2 adds Beasley B2 spec line with 1350 lbs, Mazda 12A, 40.5mm venturi, 16.5in wing. · P2 wing specs correct terminology from 'cord' to 'chord' for 16.5in single or dual element wings. · P2 Converted F5 cars reclassified as Converted F500 cars; suspension must comply with F500 requirements, minimum width 55 inches. · P2 motorcycle engines increase to 1505cc max, two-stroke to 1205cc max; automotive engines gain 50 lbs minimum weight to 1350. · FC chassis/frame section reorganized: anti-intrusion panels between main tubes clarified, suspension mounting restrictions strengthened, firewall requirements reworded. · P1 2-cycle 6-cylinder displacement increases to 1725 cc, restrictor shrinks to 40mm, minimum weight drops to 1275 lbs. · P2 Control Area definition narrowed; aerodynamic attachments and vertical structures like turning vanes now prohibited. · FC Zetec ECU requirements clarified: Pectel T2 or Performance PE-3 required with specific communications ports and SCCA tune-file/map. · P2 Engine Table Spec Line B.1 changed effective 1-1-22, details not provided in excerpt. · P2 Control Area definition clarified: floor extensions and aerodynamic attachments on bottom or top side now explicitly included. · FC composite anti-intrusion panels of non-uniform thickness limited to eight fasteners per side. · FC tire marking rules clarified: competitor responsible for declaring, marking, and logging tires with Tech before qualifying or race. · P1 splits 2000cc and 2300cc engines into separate spec lines H and I with dedicated minimum weights. · P1 Staudacher cars with 38.5mm flat plate intake restrictor reduced to 950 lbs minimum weight. · P2 CN Honda K20A-FD2 engine rebuild rules clarified: machining prohibition replaced with specific restrictions on balancing, porting, polishing, valve jobs, cylinder honing. · P1 adds 1355cc motorcycle-based engine spec line with no restrictor required, minimum weight 1075 lbs. · Converted F5 cars in P2 minimum width reduced to 55 inches from F5 spec. · P2 clarifies minimum body width requirement between front and rear wheels for Ralt RT40, RT41, Swift 008, 014. · P1 tonneau cover wording clarified: equipment must be securely attached; covers allowed for minimum dimensions. · P1 Staudacher with 1005cc homologated before 1-1-2014 may run 38.5mm flat plate intake restrictor at 950 lbs minimum weight. · P1 Spec Lines C and G: intake restrictor rules clarified with specific displacement and weight thresholds; wording standardized. · P1 Spec Lines B, C, D maximum valves per cylinder set to 4, was NA. · P2 tonneau covers now allowed to meet minimum dimensions; equipment attachment requirements clarified. · P2 multiple chassis models remove effective dates from Table 1 specifications. · P2 engines limited to 4 valves per cylinder maximum across all three spec lines. · P1 Spec Line A clarifies carburetor induction only, one per cylinder, balance tubes not allowed. · P1 Spec Line H notes clarify peripheral port or bridgeport allowed. · SM adds procedures for testing obsolete part replacements and BOP updates in sanctioned events with CRB approval. · FC Pinto engine loses 10 lbs to 1190; Pinto aluminum head loses 10 lbs to 1190; Zetec loses 10 lbs to 1210. · P1 Elan DP02 Mazda MZR sealed engine option removal effective 3/1/2021. · P1 engine table updates terminology from inlet to intake restrictor across multiple spec lines. · P2 adds new spec line for 2-cycle 3-cylinder engine up to 820cc with 10 front and 14-15 rear wheel width. · P2 Honda K20A-FD2 intake restrictor reduced from 55mm to 50mm, making cars faster. · FC: Pectel T2 and Performance PE-3 ECU maps clarified; SCCA Club or 2013 Pro map required. · SM aftermarket radiators must mount in original location, maintain core plane, require no body modifications, block openings, keep one OEM fan in stock location; 1990-1997 cars may install upper radiator seal NA75-50-OK7A. · P2 rear wing requirements clarified: standard wing 6×12 inches, end plates 14-inch square; alternate 110cm width wing 9×18 inches, end plates 14×18 inches. · FC Zetec engine minimum weight increases 20 lbs to 1220 lbs. · SM rear brake calipers may use single bracket under upper retaining bolt to prevent pin failure. · Elan NP01 classified in P2 Table 1 as Spec Line car with 2000cc displacement and P2 Engine Table restrictor. · P1 intake manifolds unrestricted on engines without flat plate restrictor; plenums and balance pipes prohibited on individual runner manifolds with restrictor. · P2 Enterprises Sports Racer adds 55mm flat plate intake restrictor Part # WM303013 as alternative to SIR. · P2 Enterprise Sports Racer 2.3L engine now requires SIR or Flat Plate restrictor sized in 0.5mm increments. · P2 fly-by-wire throttle control wording clarified: stock ECUs with drive-by-wire must activate original throttle shaft mechanism. · P1 sealed DP02-spec 2.0L Mazda MZR Elan removal date extended from 1/1/2020 to 1/1/2021. · P1 sealed DP02-spec 2.0 MZR engine removed effective 1/1/2020; competitors may use Spec Line G. · P1 Spec Line F Honda K20A-FD2 reclassified from Restricted 2.0L Group to CN-spec with stock intake manifold and 64mm throttle body. · P2 adds BMW to motorcycle-based engine options in 4-cycle line alongside Kawasaki, Suzuki, Yamaha, Honda. · FC Zetec connecting rods now allow Eagle #CRS5483F3D in addition to original Ford. · FC adds Mahle #930169439 piston as alternate option to existing Ford, Sealed Power, and United Engine choices. · P2 Honda K20A-FD2 non-composite chassis must use 55mm flat plate intake restrictor at 1500 lbs minimum weight. · P2 motorcycle engines: Stock restrictor 36.5mm to 35mm, modified 37.5mm to 34mm; B.5 restrictor 37.5mm to 33mm. All weights increase 25 lbs. · P1 traction control prohibited in GCR section 9.1.8.C.H. · P1 allows mechanical and solenoid shifters, prohibits electronic controls and pre-selected changes. · P1 bodywork minimum height provision moved to aerodynamic section; 115cm height limit for aero parts added. · P1 clarifies fender louver and brake duct rules, consolidating duplicative provisions in GCR 9.1.8.C. · P2 cars limited to power application on maximum two wheels, effective 2019-07-01. · P2 Enterprise minimum weight increases to 1375 lbs; peak horsepower of sealed ESR engine reduced per CRB specification. · P1 anti-intrusion panels now allowed anywhere on chassis sides, previously restricted. · P1 bodywork wording corrected: 'a passenger' becomes 'passenger' in three GCR sections. · FC Wiseco piston and Crower connecting rod part numbers updated; minimum weight 976 grams. · P1 Engine Table reference cleaned up; no performance change. · P1 Mazda Renesis Rotary removed from Engine Table specification line. · P1 Staudacher and Honda K20A-FD2 engine table language cleaned up; no performance changes. · P1 closed cockpit single-seat cars moved from subsection J.5 to subsection B.4; prohibition unchanged. · P2 stock engine restrictor shrinks to 35.0mm and weight rises to 1025 lbs; modified engine restrictor to 34.0mm, weight to 1125 lbs; line B.5 restrictor to 33.0mm, weight to 1185 lbs. · P2 Line A.1 restrictor reduced from 40mm to 38mm. · SM fuel pump and filter must be Mazda or OEM Equivalent part. · P1 engine table reference corrected from 'above' to 'below'; ECU throttle wording clarified for dual sensors and fail-safes. · SM 1999-2000 model year cars may use replacement Mazda ECU and injector harnesses, unmodified. · SM electrical rules reorganized and clarified; alternator external regulation now prohibited except via OEM ECU/kill switch. · SM removes tire tread protrusion beyond fender opening requirement from GCR 9.1.7.C.5. · FC Wiseco piston and Crower connecting rod assembly minimum weight increases from 555 to 976 grams. · P1 removes redundant TIR inlet restrictor provisions; SIR and flat plate restrictors remain required. · P1 Honda K20A-FD2 CN-spec clarifies allowed parts to OEM list only, no machining. · P1 engine table wording corrected; head designs removed from listed specifications. · P2 Spec Line cars now allow 1345cc Hayabusa stock engines at 1050 lbs with 30mm restrictor. · P2 Group CN Honda K20A-FD2 55mm restrictor implementation delayed from 1/1/2019 to 3/1/2019. · P2 Honda K20A-FD2 in CN chassis must use stock intake manifold with 64mm throttle body and 55mm restrictor at 1500 lbs minimum weight.showhide
P1 November 2022 Rules Clarification for Suspension Covers #33615aeroslowerP1 suspension covers must have symmetrical upper and lower surfaces, no airfoil shaping, cannot angle for downforce.
FC E&O 9.1.1.B.16.j #33634wordingunclearFC/FF PE3-8400 ECU monitor firmware version reduced from V3.04.50 to V3.04.35.
P2 Request to Classify Sebeco NP01 #33378cars addedneutralSebeco NP01-EVO and Elan NP01 Mazda 2.0L MZR added to P2, 1600 lb minimum, no restrictor required.
P2 Radical spec line clarifications #33485wordingneutralP2 Radical SR3/SR4/Cup/Club Sport/Pro-Sport/PR6 removes assisted shifting requirement across all spec lines.
P2 E&O original class intent #33519wordingneutralP2 chassis rules clarified to allow composite materials in non-fully-composite construction; anti-intrusion panel attachment standardized; Stohr and converted F600 cars added with specific allowances.
P2 Update Engine Table Spec Line B.1 #33608engineunclearUnable to summarize: the change to P2 Engine Table Spec Line B.1 is not detailed in the provided text.
SM BOP for NB1 and NB2 #32309weightslowerSM Mazda MX-5 Miata 01-05 weight increases to 2450 lbs, or 2465 with alternate bore.
P1 Clarify body panel coverage of suspension components #33318aeroslowerP1 aerodynamic devices limited to 1cm below lower surfaces rear of front axle; body panels covering suspension cannot be airfoil-shaped.
P1 E&O clarification regarding forced induction #33123inductionslowerP1 forced induction banned: turbocharging and supercharging no longer allowed.
P1 Clarify authorization to use flat plate intake restrictor #32964wordingneutralP1 motorcycle-based engines with individual throttle bodies must install flat plate restrictors within 4 inches of primary butterfly.
FC Add Specification to Performance Electronics ECU for Ford Zetec #32761wordingneutralFC Ford Zetec Performance Electronics ECU model renamed PE-3 to PE3-8400; Monitor firmware updated to V3.04.50.
P1 E&O Clarification of Bodywork Rules #32468wordingneutralP1 bodywork rules clarified: cycle fenders prohibited, side body minimum height at front axle centerline required, air ducting for downforce banned.
P2 E&O Clarification of Chassis Construction Requirements #32469wordingneutralP2 chassis construction rules clarified: fully composite or partially composite requiring composite for mobility allowed; partial composite must roll without composite parts.
P2 Clean up P2 wording #32525wordingneutralP2 classification wording cleaned up in GCR section 9.1.8.C and Contents.
P2 After Market to Aftermarket #32373wordingneutralP2 Oldsmobile cam rules clarify aftermarket manufacturer requirements; wording only.
SM Update GCR Section 9.1.7.3.A.1. #32217wordingneutralSM Majors must run authorized Penske shock and mount; Regional competitors' requirement eligibility clarified.
P2 Add spec line for Beasley B2 #32147cars addedneutralP2 adds Beasley B2 spec line with 1350 lbs, Mazda 12A, 40.5mm venturi, 16.5in wing.
P2 E&O Table 1 spec line wing terminology #32148wordingneutralP2 wing specs correct terminology from 'cord' to 'chord' for 16.5in single or dual element wings.
P2 E&O class name #32196wordingneutralP2 Converted F5 cars reclassified as Converted F500 cars; suspension must comply with F500 requirements, minimum width 55 inches.
P2 E&O Engine section #31969enginefasterP2 motorcycle engines increase to 1505cc max, two-stroke to 1205cc max; automotive engines gain 50 lbs minimum weight to 1350.
FC Clean up Chassis/Frame section #31867wordingneutralFC chassis/frame section reorganized: anti-intrusion panels between main tubes clarified, suspension mounting restrictions strengthened, firewall requirements reworded.
P1 Displacement & Weight Change Request for 2-Cycle 6 Cylinder #31609enginefasterP1 2-cycle 6-cylinder displacement increases to 1725 cc, restrictor shrinks to 40mm, minimum weight drops to 1275 lbs.
P2 E&O letter #31539 – Control Area definition #31783aeroslowerP2 Control Area definition narrowed; aerodynamic attachments and vertical structures like turning vanes now prohibited.
FC Clarify Zetec ECU requirements #31554wordingneutralFC Zetec ECU requirements clarified: Pectel T2 or Performance PE-3 required with specific communications ports and SCCA tune-file/map.
P2 BoP adjustment effective 1-1-22 #31538wordingunclearP2 Engine Table Spec Line B.1 changed effective 1-1-22, details not provided in excerpt.
P2 E&O clarification of "Control Area" definition #31539wordingneutralP2 Control Area definition clarified: floor extensions and aerodynamic attachments on bottom or top side now explicitly included.
FC Clarify composite anti-intrusion panel language #31426wordingneutralFC composite anti-intrusion panels of non-uniform thickness limited to eight fasteners per side.
FC Clarify tire marking requirements #31455wordingneutralFC tire marking rules clarified: competitor responsible for declaring, marking, and logging tires with Tech before qualifying or race.
P1 Move 2000cc and 2300cc engine options to individual spec lines #31012wordingneutralP1 splits 2000cc and 2300cc engines into separate spec lines H and I with dedicated minimum weights.
P1 E&O Spec Line B notes #31095weightfasterP1 Staudacher cars with 38.5mm flat plate intake restrictor reduced to 950 lbs minimum weight.
P2 P2 CN Engine Rebuild Clarification #31000wordingneutralP2 CN Honda K20A-FD2 engine rebuild rules clarified: machining prohibition replaced with specific restrictions on balancing, porting, polishing, valve jobs, cylinder honing.
P1 Add 1355cc spec line #30890cars addedneutralP1 adds 1355cc motorcycle-based engine spec line with no restrictor required, minimum weight 1075 lbs.
P2 F5 P2 Conversion #30856aerofasterConverted F5 cars in P2 minimum width reduced to 55 inches from F5 spec.
P2 Clarify minimum body width requirement #30859wordingneutralP2 clarifies minimum body width requirement between front and rear wheels for Ralt RT40, RT41, Swift 008, 014.
P1 E&O tonneau cover provision in cockpit opening section #30458wordingneutralP1 tonneau cover wording clarified: equipment must be securely attached; covers allowed for minimum dimensions.
P1 Update Spec Line B Notes #30498wordingneutralP1 Staudacher with 1005cc homologated before 1-1-2014 may run 38.5mm flat plate intake restrictor at 950 lbs minimum weight.
P1 Update Spec Lines C and G notes #30499wordingneutralP1 Spec Lines C and G: intake restrictor rules clarified with specific displacement and weight thresholds; wording standardized.
P1 E&O Maximum Valves Per Cylinder #30559engineunclearP1 Spec Lines B, C, D maximum valves per cylinder set to 4, was NA.
P2 E&O tonneau cover provision in cockpit opening section #30459wordingneutralP2 tonneau covers now allowed to meet minimum dimensions; equipment attachment requirements clarified.
P2 Remove effective dates in Table 1 #30468wordingneutralP2 multiple chassis models remove effective dates from Table 1 specifications.
P2 E&O Maximum Valves Per Cylinder #30560engineneutralP2 engines limited to 4 valves per cylinder maximum across all three spec lines.
P1 Clean up Spec Line A notes section #30424wordingneutralP1 Spec Line A clarifies carburetor induction only, one per cylinder, balance tubes not allowed.
P1 Clean up Spec Line H notes section #30425wordingneutralP1 Spec Line H notes clarify peripheral port or bridgeport allowed.
SM Updates - Obsolete Parts & BOP Parts #30438wordingneutralSM adds procedures for testing obsolete part replacements and BOP updates in sanctioned events with CRB approval.
FC Request for FC Weight Change #30171weightfasterFC Pinto engine loses 10 lbs to 1190; Pinto aluminum head loses 10 lbs to 1190; Zetec loses 10 lbs to 1210.
P1 E&O restrictor terminology #30285wordingneutralP1 engine table updates terminology from inlet to intake restrictor across multiple spec lines.
P2 Add a new spec line for a 2-cycle, 3-cylinder engine up to 820cc #30272cars addedneutralP2 adds new spec line for 2-cycle 3-cylinder engine up to 820cc with 10 front and 14-15 rear wheel width.
P2 Balance of Performance adjustments effective 01-01-2021 #29822inductionfasterP2 Honda K20A-FD2 intake restrictor reduced from 55mm to 50mm, making cars faster.
FC Urgent: SCCA PE3 map unsuitable #29475wordingneutralFC: Pectel T2 and Performance PE-3 ECU maps clarified; SCCA Club or 2013 Pro map required.
SM Radiator E&O Clarifications #29294wordingneutralSM aftermarket radiators must mount in original location, maintain core plane, require no body modifications, block openings, keep one OEM fan in stock location; 1990-1997 cars may install upper radiator seal NA75-50-OK7A.
P2 E&O clarification of P2 rear wing requirements #29205aeroneutralP2 rear wing requirements clarified: standard wing 6×12 inches, end plates 14-inch square; alternate 110cm width wing 9×18 inches, end plates 14×18 inches.
FC Request for weight adjustments to equalize FC competition. #28888weightslowerFC Zetec engine minimum weight increases 20 lbs to 1220 lbs.
SM Modifications to prevent failures of Rear Brake Caliper Pin #28953suspension & brakesneutralSM rear brake calipers may use single bracket under upper retaining bolt to prevent pin failure.
P2 Classify Elan NP01 in P2 Table 1 #28812cars addedneutralElan NP01 classified in P2 Table 1 as Spec Line car with 2000cc displacement and P2 Engine Table restrictor.
P1 E&O minimum weights and intake manifolds #28731inductionfasterP1 intake manifolds unrestricted on engines without flat plate restrictor; plenums and balance pipes prohibited on individual runner manifolds with restrictor.
P2 SCCA Enterprises ESR / P2 engine restrictor testing #28669engineneutralP2 Enterprises Sports Racer adds 55mm flat plate intake restrictor Part # WM303013 as alternative to SIR.
P2 Add ESR inlet restrictor #27869inductionslowerP2 Enterprise Sports Racer 2.3L engine now requires SIR or Flat Plate restrictor sized in 0.5mm increments.
P2 Request for Fly by Wire Rule Wording Change #28247wordingneutralP2 fly-by-wire throttle control wording clarified: stock ECUs with drive-by-wire must activate original throttle shaft mechanism.
P1 Extend date for removing sealed DP02-spec 2.0L option #28046wordingneutralP1 sealed DP02-spec 2.0L Mazda MZR Elan removal date extended from 1/1/2020 to 1/1/2021.
P1 Remove sealed DP02-spec 2.0 MZR spec #26753removedslowerP1 sealed DP02-spec 2.0 MZR engine removed effective 1/1/2020; competitors may use Spec Line G.
P1 Update Revised Spec Line F #27745engineunclearP1 Spec Line F Honda K20A-FD2 reclassified from Restricted 2.0L Group to CN-spec with stock intake manifold and 64mm throttle body.
P2 Request for addition of BMW Engine in P2 Engine Table #27821cars addedneutralP2 adds BMW to motorcycle-based engine options in 4-cycle line alongside Kawasaki, Suzuki, Yamaha, Honda.
FC Request for Better Zetec Connecting Rods #27710wordingneutralFC Zetec connecting rods now allow Eagle #CRS5483F3D in addition to original Ford.
FC Add Alternate Piston #27795wordingneutralFC adds Mahle #930169439 piston as alternate option to existing Ford, Sealed Power, and United Engine choices.
P2 Update Engine Table Line E notes #27414inductionslowerP2 Honda K20A-FD2 non-composite chassis must use 55mm flat plate intake restrictor at 1500 lbs minimum weight.
P2 Update P2 Engine Table spec lines to reflect 3/1/2019 #27254inductionslowerP2 motorcycle engines: Stock restrictor 36.5mm to 35mm, modified 37.5mm to 34mm; B.5 restrictor 37.5mm to 33mm. All weights increase 25 lbs.
P1 E&O Transmissions #27098wordingunclearP1 traction control prohibited in GCR section 9.1.8.C.H.
P1 E&O Transmissions #27005wordingneutralP1 allows mechanical and solenoid shifters, prohibits electronic controls and pre-selected changes.
P1 Move minimum height provision to #27031wordingneutralP1 bodywork minimum height provision moved to aerodynamic section; 115cm height limit for aero parts added.
P1 Remove duplicative fender louver provision #27033wordingneutralP1 clarifies fender louver and brake duct rules, consolidating duplicative provisions in GCR 9.1.8.C.
P2 E&O Transmissions #27006otherslowerP2 cars limited to power application on maximum two wheels, effective 2019-07-01.
P2 Request to restrict all cars #26246weightslowerP2 Enterprise minimum weight increases to 1375 lbs; peak horsepower of sealed ESR engine reduced per CRB specification.
P1 Missing word E&O #26919wordingneutralP1 anti-intrusion panels now allowed anywhere on chassis sides, previously restricted.
P1 E&O correction to GCR 9.1.8.C.C. #26927wordingneutralP1 bodywork wording corrected: 'a passenger' becomes 'passenger' in three GCR sections.
FC E&O Wiseco piston and Crower connecting rod #26659wordingneutralFC Wiseco piston and Crower connecting rod part numbers updated; minimum weight 976 grams.
P1 Clean up reference to engine table #26648wordingneutralP1 Engine Table reference cleaned up; no performance change.
P1 Remove redundant spec line #26692removedneutralP1 Mazda Renesis Rotary removed from Engine Table specification line.
P1 Clean Up Engine Table Language #26590wordingneutralP1 Staudacher and Honda K20A-FD2 engine table language cleaned up; no performance changes.
P1 Move single-seat closed cockpit provision to #26376wordingneutralP1 closed cockpit single-seat cars moved from subsection J.5 to subsection B.4; prohibition unchanged.
P2 Change Engine Table Lines B.1 & B.5 #25777inductionslowerP2 stock engine restrictor shrinks to 35.0mm and weight rises to 1025 lbs; modified engine restrictor to 34.0mm, weight to 1125 lbs; line B.5 restrictor to 33.0mm, weight to 1185 lbs.
P2 Change Line A.1 restrictor size #26429inductionslowerP2 Line A.1 restrictor reduced from 40mm to 38mm.
SM Request to allow aftermarket fuel filters. #26370wordingneutralSM fuel pump and filter must be Mazda or OEM Equivalent part.
P1 Correct errors in GCR section 9.1.8.C.J #26144wordingneutralP1 engine table reference corrected from 'above' to 'below'; ECU throttle wording clarified for dual sensors and fail-safes.
SM Request 99-00 replacement Wire harnesses #25602wordingneutralSM 1999-2000 model year cars may use replacement Mazda ECU and injector harnesses, unmodified.
SM Organize and Clarify 9.1.7.C.1.o. #25913wordingneutralSM electrical rules reorganized and clarified; alternator external regulation now prohibited except via OEM ECU/kill switch.
SM Strike Tire Tread Language #26123wordingneutralSM removes tire tread protrusion beyond fender opening requirement from GCR 9.1.7.C.5.
FC Correct Wiseco piston and connecting rod #25809weightslowerFC Wiseco piston and Crower connecting rod assembly minimum weight increases from 555 to 976 grams.
P1 Remove redundant inlet restrictor provisions #25877wordingneutralP1 removes redundant TIR inlet restrictor provisions; SIR and flat plate restrictors remain required.
P1 Clarify Honda K20A-FD2 parts requirement #25949wordingneutralP1 Honda K20A-FD2 CN-spec clarifies allowed parts to OEM list only, no machining.
P1 Correct GCR section 9.1.8.C.J errors #25966wordingneutralP1 engine table wording corrected; head designs removed from listed specifications.
P2 Request to Allow 1345cc Hayabusa Engines for Spec Line P2 Cars #25595enginefasterP2 Spec Line cars now allow 1345cc Hayabusa stock engines at 1050 lbs with 30mm restrictor.
P2 Change CN inlet restrictor implementation date #25816wordingneutralP2 Group CN Honda K20A-FD2 55mm restrictor implementation delayed from 1/1/2019 to 3/1/2019.
P2 Clarify Honda K20A-FD2 parts requirement #25950inductionslowerP2 Honda K20A-FD2 in CN chassis must use stock intake manifold with 64mm throttle body and 55mm restrictor at 1500 lbs minimum weight.
Best is the class's fastest lap in that event's qualifying or race sessions, with the driver who set it, how many cars set a time that session and how close the top five were; a best from fewer than three cars is greyed. With two or more classes, "vs" is the gap of each class's best to the first class's at the same event. "% of P1" is the class's best as a share of P1's best at the same event (100% is level, less is quicker): weather and track condition move every class together, so this compares across years where the raw times do not. It still breaks when P1's own field changes or one session was wet and another dry. Newest event first. The coloured figure under each value is the change from the previous event that has one (green is quicker, red slower). Whole laps only, so events with different sector layouts still compare. Weather and track condition are not accounted for.